DevicePolicyManager

ACTION_ADD_DEVICE_ADMIN

public static final String ACTION_ADD_DEVICE_ADMIN

Activity action: ask the user to add a new device administrator to the system. The desired policy is the ComponentName of the policy in the EXTRA_DEVICE_ADMIN extra field. This will invoke a UI to bring the user through adding the device administrator to the system (or allowing them to reject it).

You can optionally include the EXTRA_ADD_EXPLANATION field to provide the user with additional explanation (in addition to your component's description) about what is being added.

If your administrator is already active, this will ordinarily return immediately (without user intervention). However, if your administrator has been updated and is requesting additional uses-policy flags, the user will be presented with the new list. New policies will not be available to the updated administrator until the user has accepted the new list.

Constant Value: "android.app.action.ADD_DEVICE_ADMIN"

ACTION_ADMIN_POLICY_COMPLIANCE

public static final String ACTION_ADMIN_POLICY_COMPLIANCE

Activity action: Starts the administrator to show policy compliance for the provisioning. This action is used any time that the administrator has an opportunity to show policy compliance before the end of setup wizard. This could happen as part of the admin-integrated provisioning flow (in which case this gets sent after ACTION_GET_PROVISIONING_MODE), or it could happen during provisioning finalization if the administrator supports finalization during setup wizard.

Intents with this action may also be supplied with the EXTRA_PROVISIONING_ADMIN_EXTRAS_BUNDLE extra.

Constant Value: "android.app.action.ADMIN_POLICY_COMPLIANCE"

ACTION_APPLICATION_DELEGATION_SCOPES_CHANGED

public static final String ACTION_APPLICATION_DELEGATION_SCOPES_CHANGED

Broadcast Action: Sent after application delegation scopes are changed. The new delegation scopes will be sent in an ArrayList<String> extra identified by the EXTRA_DELEGATION_SCOPES key.

Note: This is a protected intent that can only be sent by the system.

Constant Value: "android.app.action.APPLICATION_DELEGATION_SCOPES_CHANGED"

ACTION_CHECK_POLICY_COMPLIANCE

public static final String ACTION_CHECK_POLICY_COMPLIANCE

Activity action: launch the DPC to check policy compliance. This intent is launched when the user taps on the notification about personal apps suspension. When handling this intent the DPC must check if personal apps should still be suspended and either unsuspend them or instruct the user on how to resolve the noncompliance causing the suspension.

Constant Value: "android.app.action.CHECK_POLICY_COMPLIANCE"

ACTION_DEVICE_ADMIN_SERVICE

public static final String ACTION_DEVICE_ADMIN_SERVICE

Service action: Action for a service that device owner and profile owner can optionally own. If a device owner or a profile owner has such a service, the system tries to keep a bound connection to it, in order to keep their process always running. The service must be protected with the Manifest.permission.BIND_DEVICE_ADMIN permission.

Constant Value: "android.app.action.DEVICE_ADMIN_SERVICE"

ACTION_DEVICE_FINANCING_STATE_CHANGED

public static final String ACTION_DEVICE_FINANCING_STATE_CHANGED

Broadcast Action: Broadcast sent to indicate that the device financing state has changed.

This occurs when, for example, a financing kiosk app has been added or removed.

To query the current device financing state see isDeviceFinanced().

This will be delivered to the following apps if they include a receiver for this action in their manifest:

• Device owner admins.
• Organization-owned profile owner admins
• The supervision app
• The device management role holder

Constant Value: "android.app.admin.action.DEVICE_FINANCING_STATE_CHANGED"

ACTION_DEVICE_OWNER_CHANGED

public static final String ACTION_DEVICE_OWNER_CHANGED

Broadcast action: sent when the device owner is set, changed or cleared. This broadcast is sent only to the primary user.

Constant Value: "android.app.action.DEVICE_OWNER_CHANGED"

ACTION_DEVICE_POLICY_RESOURCE_UPDATED

public static final String ACTION_DEVICE_POLICY_RESOURCE_UPDATED

Broadcast action: notify system apps (e.g. settings, SysUI, etc) that the device management resources with IDs EXTRA_RESOURCE_IDS has been updated, the updated resources can be retrieved using DevicePolicyResourcesManager.getDrawable and DevicePolicyResourcesManager.getString.

This broadcast is sent to registered receivers only.

EXTRA_RESOURCE_TYPE will be included to identify the type of resource being updated.

Constant Value: "android.app.action.DEVICE_POLICY_RESOURCE_UPDATED"

ACTION_GET_PROVISIONING_MODE

public static final String ACTION_GET_PROVISIONING_MODE

Activity action: Starts the administrator to get the mode for the provisioning. This intent may contain the following extras:

• EXTRA_PROVISIONING_ADMIN_EXTRAS_BUNDLE
• EXTRA_PROVISIONING_IMEI
• EXTRA_PROVISIONING_SERIAL_NUMBER
• EXTRA_PROVISIONING_ALLOWED_PROVISIONING_MODES
• EXTRA_PROVISIONING_SENSORS_PERMISSION_GRANT_OPT_OUT

The target activity should return one of the following values in EXTRA_PROVISIONING_MODE as result:

• PROVISIONING_MODE_FULLY_MANAGED_DEVICE
• PROVISIONING_MODE_MANAGED_PROFILE

If performing fully-managed device provisioning and the admin app desires to show its own education screens, the target activity can additionally return EXTRA_PROVISIONING_SKIP_EDUCATION_SCREENS set to true.

The target activity may also return the account that needs to be migrated from primary user to managed profile in case of a profile owner provisioning in EXTRA_PROVISIONING_ACCOUNT_TO_MIGRATE as result.

The target activity may also include the EXTRA_PROVISIONING_ADMIN_EXTRAS_BUNDLE extra in the intent result. The values of this PersistableBundle will be sent as an intent extra of the same name to the ACTION_ADMIN_POLICY_COMPLIANCE activity, along with the values of the EXTRA_PROVISIONING_ADMIN_EXTRAS_BUNDLE extra that are already supplied to this activity.

Other extras the target activity may include in the intent result:

• EXTRA_PROVISIONING_DISCLAIMERS
• EXTRA_PROVISIONING_SKIP_ENCRYPTION
• EXTRA_PROVISIONING_KEEP_SCREEN_ON
• EXTRA_PROVISIONING_KEEP_ACCOUNT_ON_MIGRATION for work profile provisioning
• EXTRA_PROVISIONING_LEAVE_ALL_SYSTEM_APPS_ENABLED for work profile provisioning
• EXTRA_PROVISIONING_SENSORS_PERMISSION_GRANT_OPT_OUT for fully-managed device provisioning
• EXTRA_PROVISIONING_LOCALE for fully-managed device provisioning
• EXTRA_PROVISIONING_LOCAL_TIME for fully-managed device provisioning
• EXTRA_PROVISIONING_TIME_ZONE for fully-managed device provisioning

Constant Value: "android.app.action.GET_PROVISIONING_MODE"

ACTION_MANAGED_PROFILE_PROVISIONED

public static final String ACTION_MANAGED_PROFILE_PROVISIONED

Broadcast Action: This broadcast is sent to indicate that provisioning of a managed profile has completed successfully.

The broadcast is limited to the primary profile, to the app specified in the provisioning intent with action ACTION_PROVISION_MANAGED_PROFILE.

This intent will contain the following extras

• Intent.EXTRA_USER, corresponds to the UserHandle of the managed profile.
• EXTRA_PROVISIONING_ACCOUNT_TO_MIGRATE, corresponds to the account requested to be migrated at provisioning time, if any.

Constant Value: "android.app.action.MANAGED_PROFILE_PROVISIONED"

ACTION_PROFILE_OWNER_CHANGED

public static final String ACTION_PROFILE_OWNER_CHANGED

Broadcast action: sent when the profile owner is set, changed or cleared. This broadcast is sent only to the user managed by the new profile owner.

Constant Value: "android.app.action.PROFILE_OWNER_CHANGED"

ACTION_PROVISIONING_SUCCESSFUL

public static final String ACTION_PROVISIONING_SUCCESSFUL

Activity action: This activity action is sent to indicate that provisioning of a managed profile or managed device has completed successfully. It'll be sent at the same time as DeviceAdminReceiver.ACTION_PROFILE_PROVISIONING_COMPLETE broadcast but this will be delivered faster as it's an activity intent.

The intent is only sent to the new device or profile owner.

Constant Value: "android.app.action.PROVISIONING_SUCCESSFUL"

ACTION_PROVISION_MANAGED_DEVICE

public static final String ACTION_PROVISION_MANAGED_DEVICE

This constant was deprecated in API level 31.
to support Build.VERSION_CODES.S and later, admin apps must implement activities with intent filters for the ACTION_GET_PROVISIONING_MODE and ACTION_ADMIN_POLICY_COMPLIANCE intent actions; using ACTION_PROVISION_MANAGED_DEVICE to start provisioning will cause the provisioning to fail; to additionally support pre-Build.VERSION_CODES.S, admin apps must also continue to use this constant.

Activity action: Starts the provisioning flow which sets up a managed device. Must be started with Activity.startActivityForResult(Intent, int).

During device owner provisioning a device admin app is set as the owner of the device. A device owner has full control over the device. The device owner can not be modified by the user.

A typical use case would be a device that is owned by a company, but used by either an employee or client.

An intent with this action can be sent only on an unprovisioned device. It is possible to check if provisioning is allowed or not by querying the method isProvisioningAllowed(java.lang.String).

The intent contains the following extras:

• EXTRA_PROVISIONING_DEVICE_ADMIN_COMPONENT_NAME
• EXTRA_PROVISIONING_SKIP_ENCRYPTION, optional
• EXTRA_PROVISIONING_LEAVE_ALL_SYSTEM_APPS_ENABLED, optional
• EXTRA_PROVISIONING_ADMIN_EXTRAS_BUNDLE, optional
• EXTRA_PROVISIONING_LOGO_URI, optional
• EXTRA_PROVISIONING_DISCLAIMERS, optional
• EXTRA_PROVISIONING_SKIP_EDUCATION_SCREENS, optional

When device owner provisioning has completed, an intent of the type DeviceAdminReceiver.ACTION_PROFILE_PROVISIONING_COMPLETE is broadcast to the device owner.

From version Build.VERSION_CODES.O, when device owner provisioning has completed, along with the above broadcast, activity intent ACTION_PROVISIONING_SUCCESSFUL will also be sent to the device owner.

If provisioning fails, the device is factory reset.

A result code of Activity.RESULT_OK implies that the synchronous part of the provisioning flow was successful, although this doesn't guarantee the full flow will succeed. Conversely a result code of Activity.RESULT_CANCELED implies that the user backed-out of provisioning, or some precondition for provisioning wasn't met.

Constant Value: "android.app.action.PROVISION_MANAGED_DEVICE"

ACTION_PROVISION_MANAGED_PROFILE

public static final String ACTION_PROVISION_MANAGED_PROFILE

Activity action: Starts the provisioning flow which sets up a managed profile.

It is possible to check if provisioning is allowed or not by querying the method isProvisioningAllowed(java.lang.String).

The intent may contain the following extras:

When managed provisioning has completed, broadcasts are sent to the application specified in the provisioning intent. The DeviceAdminReceiver.ACTION_PROFILE_PROVISIONING_COMPLETE broadcast is sent in the managed profile and the ACTION_MANAGED_PROFILE_PROVISIONED broadcast is sent in the primary profile.

From version Build.VERSION_CODES.O, when managed provisioning has completed, along with the above broadcast, activity intent ACTION_PROVISIONING_SUCCESSFUL will also be sent to the profile owner.

If provisioning fails, the managed profile is removed so the device returns to its previous state.

If launched with Activity.startActivityForResult(Intent, int) a result code of Activity.RESULT_OK indicates that the synchronous part of the provisioning flow was successful, although this doesn't guarantee the full flow will succeed. Conversely a result code of Activity.RESULT_CANCELED indicates that the user backed-out of provisioning or some precondition for provisioning wasn't met.

If a device policy management role holder updater is present on the device, an internet connection attempt must be made prior to launching this intent.

Constant Value: "android.app.action.PROVISION_MANAGED_PROFILE"

ACTION_SET_NEW_PARENT_PROFILE_PASSWORD

public static final String ACTION_SET_NEW_PARENT_PROFILE_PASSWORD

Activity action: have the user enter a new password for the parent profile. If the intent is launched from within a managed profile, this will trigger entering a new password for the parent of the profile. The caller can optionally set EXTRA_DEVICE_PASSWORD_REQUIREMENT_ONLY to only enforce device-wide password requirement. In all other cases the behaviour is identical to ACTION_SET_NEW_PASSWORD.

Constant Value: "android.app.action.SET_NEW_PARENT_PROFILE_PASSWORD"

ACTION_SET_NEW_PASSWORD

public static final String ACTION_SET_NEW_PASSWORD

Activity action: have the user enter a new password.

For admin apps, this activity should be launched after using setPasswordQuality(android.content.ComponentName, int), or setPasswordMinimumLength(android.content.ComponentName, int) to have the user enter a new password that meets the current requirements. You can use isActivePasswordSufficient() to determine whether you need to have the user select a new password in order to meet the current constraints. Upon being resumed from this activity, you can check the new password characteristics to see if they are sufficient.

Non-admin apps can use getPasswordComplexity() to check the current screen lock complexity, and use this activity with extra EXTRA_PASSWORD_COMPLEXITY to suggest to users how complex the app wants the new screen lock to be. Note that both getPasswordComplexity() and the extra EXTRA_PASSWORD_COMPLEXITY require the calling app to have the permission permission.REQUEST_PASSWORD_COMPLEXITY.

If the intent is launched from within a managed profile with a profile owner built against Build.VERSION_CODES.M or before, this will trigger entering a new password for the parent of the profile. For all other cases it will trigger entering a new password for the user or profile it is launched from.

Constant Value: "android.app.action.SET_NEW_PASSWORD"

ACTION_START_ENCRYPTION

public static final String ACTION_START_ENCRYPTION

Activity action: begin the process of encrypting data on the device. This activity should be launched after using setStorageEncryption(ComponentName, boolean) to request encryption be activated. After resuming from this activity, use getStorageEncryption(ComponentName) to check encryption status. However, on some devices this activity may never return, as it may trigger a reboot and in some cases a complete data wipe of the device.

Constant Value: "android.app.action.START_ENCRYPTION"

ACTION_SYSTEM_UPDATE_POLICY_CHANGED

public static final String ACTION_SYSTEM_UPDATE_POLICY_CHANGED

Broadcast action: notify that a new local system update policy has been set by the device owner. The new policy can be retrieved by getSystemUpdatePolicy().

Constant Value: "android.app.action.SYSTEM_UPDATE_POLICY_CHANGED"

CONTENT_PROTECTION_DISABLED

public static final int CONTENT_PROTECTION_DISABLED

Indicates that content protection is controlled and disabled by a policy (default).

Constant Value: 1 (0x00000001)

CONTENT_PROTECTION_ENABLED

public static final int CONTENT_PROTECTION_ENABLED

Indicates that content protection is controlled and enabled by a policy.

Constant Value: 2 (0x00000002)

CONTENT_PROTECTION_NOT_CONTROLLED_BY_POLICY

public static final int CONTENT_PROTECTION_NOT_CONTROLLED_BY_POLICY

Indicates that content protection is not controlled by policy, allowing user to choose.

Constant Value: 0 (0x00000000)

DELEGATION_APP_RESTRICTIONS

public static final String DELEGATION_APP_RESTRICTIONS

Delegation of application restrictions management. This scope grants access to the setApplicationRestrictions(ComponentName, String, Bundle) and getApplicationRestrictions(ComponentName, String) APIs.

Constant Value: "delegation-app-restrictions"

DELEGATION_BLOCK_UNINSTALL

public static final String DELEGATION_BLOCK_UNINSTALL

Delegation of application uninstall block. This scope grants access to the setUninstallBlocked(ComponentName, String, boolean) API.

Constant Value: "delegation-block-uninstall"

DELEGATION_CERT_INSTALL

public static final String DELEGATION_CERT_INSTALL

Delegation of certificate installation and management. This scope grants access to the getInstalledCaCerts(ComponentName), hasCaCertInstalled(ComponentName, byte), installCaCert(ComponentName, byte), uninstallCaCert(ComponentName, byte), uninstallAllUserCaCerts(ComponentName) and installKeyPair(ComponentName, PrivateKey, Certificate, String) APIs. This scope also grants the ability to read identifiers that the delegating device owner or profile owner can obtain. See getEnrollmentSpecificId().

Constant Value: "delegation-cert-install"

DELEGATION_CERT_SELECTION

public static final String DELEGATION_CERT_SELECTION

Grants access to selection of KeyChain certificates on behalf of requesting apps. Once granted the app will start receiving DelegatedAdminReceiver.onChoosePrivateKeyAlias. The caller (PO/DO) will no longer receive DeviceAdminReceiver.onChoosePrivateKeyAlias. There can be at most one app that has this delegation. If another app already had delegated certificate selection access, it will lose the delegation when a new app is delegated.

The delegated app can also call grantKeyPairToApp(ComponentName, String, String) and revokeKeyPairFromApp(ComponentName, String, String) to directly grant KeyChain keys to other apps.

Can be granted by Device Owner or Profile Owner.

Constant Value: "delegation-cert-selection"

DELEGATION_ENABLE_SYSTEM_APP

public static final String DELEGATION_ENABLE_SYSTEM_APP

Delegation for enabling system apps. This scope grants access to the enableSystemApp(ComponentName, Intent) API.

Constant Value: "delegation-enable-system-app"

DELEGATION_INSTALL_EXISTING_PACKAGE

public static final String DELEGATION_INSTALL_EXISTING_PACKAGE

Delegation for installing existing packages. This scope grants access to the installExistingPackage(ComponentName, String) API.

Constant Value: "delegation-install-existing-package"

DELEGATION_KEEP_UNINSTALLED_PACKAGES

public static final String DELEGATION_KEEP_UNINSTALLED_PACKAGES

Delegation of management of uninstalled packages. This scope grants access to the setKeepUninstalledPackages(ComponentName, List) and getKeepUninstalledPackages(ComponentName) APIs.

Constant Value: "delegation-keep-uninstalled-packages"

DELEGATION_NETWORK_LOGGING

public static final String DELEGATION_NETWORK_LOGGING

Grants access to setNetworkLoggingEnabled(ComponentName, boolean), isNetworkLoggingEnabled(ComponentName) and retrieveNetworkLogs(ComponentName, long). Once granted the delegated app will start receiving DelegatedAdminReceiver.onNetworkLogsAvailable() callback, and Device owner or Profile Owner will no longer receive the DeviceAdminReceiver.onNetworkLogsAvailable() callback. There can be at most one app that has this delegation. If another app already had delegated network logging access, it will lose the delegation when a new app is delegated.

Device Owner can grant this access since Android 10. Profile Owner of a managed profile can grant this access since Android 12.

Constant Value: "delegation-network-logging"

DELEGATION_PACKAGE_ACCESS

public static final String DELEGATION_PACKAGE_ACCESS

Delegation of package access state. This scope grants access to the isApplicationHidden(ComponentName, String), setApplicationHidden(ComponentName, String, boolean), isPackageSuspended(ComponentName, String), and setPackagesSuspended(ComponentName, String, boolean) APIs.

Constant Value: "delegation-package-access"

DELEGATION_PERMISSION_GRANT

public static final String DELEGATION_PERMISSION_GRANT

Delegation of permission policy and permission grant state. This scope grants access to the setPermissionPolicy(ComponentName, int), getPermissionGrantState(ComponentName, String, String), and setPermissionGrantState(ComponentName, String, String, int) APIs.

Constant Value: "delegation-permission-grant"

DELEGATION_SECURITY_LOGGING

public static final String DELEGATION_SECURITY_LOGGING

Grants access to setSecurityLoggingEnabled(ComponentName, boolean), isSecurityLoggingEnabled(ComponentName), retrieveSecurityLogs(ComponentName), and retrievePreRebootSecurityLogs(ComponentName). Once granted the delegated app will start receiving DelegatedAdminReceiver.onSecurityLogsAvailable callback, and Device owner or Profile Owner will no longer receive the DeviceAdminReceiver.onSecurityLogsAvailable callback. There can be at most one app that has this delegation. If another app already had delegated security logging access, it will lose the delegation when a new app is delegated.

Can only be granted by Device Owner or Profile Owner of an organization-owned managed profile.

Constant Value: "delegation-security-logging"

ENCRYPTION_STATUS_ACTIVATING

public static final int ENCRYPTION_STATUS_ACTIVATING

This constant was deprecated in API level 34.
This result code has never actually been used, so there is no reason for apps to check for it.

Result code for getStorageEncryptionStatus(): indicating that encryption is not currently active, but is currently being activated.

Constant Value: 2 (0x00000002)

ENCRYPTION_STATUS_ACTIVE

public static final int ENCRYPTION_STATUS_ACTIVE

Result code for setStorageEncryption(ComponentName, boolean) and getStorageEncryptionStatus(): indicating that encryption is active.

getStorageEncryptionStatus() can only return this value for apps targeting API level 23 or lower, or on devices that use Full Disk Encryption. Support for Full Disk Encryption was entirely removed in API level 33, having been replaced by File Based Encryption. The result code ENCRYPTION_STATUS_ACTIVE_PER_USER is used on devices that use File Based Encryption, except when the app targets API level 23 or lower.

setStorageEncryption(ComponentName, boolean) can still return this value for an unrelated reason, but setStorageEncryption(ComponentName, boolean) is deprecated since it doesn't do anything useful.

Constant Value: 3 (0x00000003)

ENCRYPTION_STATUS_ACTIVE_DEFAULT_KEY

public static final int ENCRYPTION_STATUS_ACTIVE_DEFAULT_KEY

Result code for getStorageEncryptionStatus(): indicating that encryption is active, but the encryption key is not cryptographically protected by the user's credentials.

This value can only be returned on devices that use Full Disk Encryption. Support for Full Disk Encryption was entirely removed in API level 33, having been replaced by File Based Encryption. With File Based Encryption, each user's credential-encrypted storage is always cryptographically protected by the user's credentials.

Constant Value: 4 (0x00000004)

ENCRYPTION_STATUS_ACTIVE_PER_USER

public static final int ENCRYPTION_STATUS_ACTIVE_PER_USER

Result code for getStorageEncryptionStatus(): indicating that encryption is active and the encryption key is tied to the user or profile.

This value is only returned to apps targeting API level 24 and above. For apps targeting earlier API levels, ENCRYPTION_STATUS_ACTIVE is returned, even if the encryption key is specific to the user or profile.

Constant Value: 5 (0x00000005)

ENCRYPTION_STATUS_INACTIVE

public static final int ENCRYPTION_STATUS_INACTIVE

Result code for setStorageEncryption(ComponentName, boolean) and getStorageEncryptionStatus(): indicating that encryption is supported, but is not currently active.

getStorageEncryptionStatus() can only return this value on devices that use Full Disk Encryption. Support for Full Disk Encryption was entirely removed in API level 33, having been replaced by File Based Encryption. Devices that use File Based Encryption always automatically activate their encryption on first boot.

setStorageEncryption(ComponentName, boolean) can still return this value for an unrelated reason, but setStorageEncryption(ComponentName, boolean) is deprecated since it doesn't do anything useful.

Constant Value: 1 (0x00000001)

ENCRYPTION_STATUS_UNSUPPORTED

public static final int ENCRYPTION_STATUS_UNSUPPORTED

Result code for setStorageEncryption(ComponentName, boolean) and getStorageEncryptionStatus(): indicating that encryption is not supported.

Constant Value: 0 (0x00000000)

EXTRA_ADD_EXPLANATION

public static final String EXTRA_ADD_EXPLANATION

An optional CharSequence providing additional explanation for why the admin is being added.

Constant Value: "android.app.extra.ADD_EXPLANATION"

EXTRA_DELEGATION_SCOPES

public static final String EXTRA_DELEGATION_SCOPES

An ArrayList<String> corresponding to the delegation scopes given to an app in the ACTION_APPLICATION_DELEGATION_SCOPES_CHANGED broadcast.

Constant Value: "android.app.extra.DELEGATION_SCOPES"

EXTRA_DEVICE_ADMIN

public static final String EXTRA_DEVICE_ADMIN

The ComponentName of the administrator component.

Constant Value: "android.app.extra.DEVICE_ADMIN"

EXTRA_DEVICE_PASSWORD_REQUIREMENT_ONLY

public static final String EXTRA_DEVICE_PASSWORD_REQUIREMENT_ONLY

A boolean extra for ACTION_SET_NEW_PARENT_PROFILE_PASSWORD requesting that only device password requirement is enforced during the parent profile password enrolment flow.

Normally when enrolling password for the parent profile, both the device-wide password requirement (requirement set via getParentProfileInstance(android.content.ComponentName) instance) and the profile password requirement are enforced, if the profile currently does not have a separate work challenge. By setting this to true, profile password requirement is explicitly disregarded.

Constant Value: "android.app.extra.DEVICE_PASSWORD_REQUIREMENT_ONLY"

EXTRA_PASSWORD_COMPLEXITY

public static final String EXTRA_PASSWORD_COMPLEXITY

An integer indicating the complexity level of the new password an app would like the user to set when launching the action ACTION_SET_NEW_PASSWORD.

Must be one of

• PASSWORD_COMPLEXITY_HIGH
• PASSWORD_COMPLEXITY_MEDIUM
• PASSWORD_COMPLEXITY_LOW
• PASSWORD_COMPLEXITY_NONE

If an invalid value is used, it will be treated as PASSWORD_COMPLEXITY_NONE.
Requires Manifest.permission.REQUEST_PASSWORD_COMPLEXITY

Constant Value: "android.app.extra.PASSWORD_COMPLEXITY"

EXTRA_PROVISIONING_ACCOUNT_TO_MIGRATE

public static final String EXTRA_PROVISIONING_ACCOUNT_TO_MIGRATE

An Account extra holding the account to migrate during managed profile provisioning.

If the account supplied is present in the user, it will be copied, along with its credentials to the managed profile and removed from the user.

Constant Value: "android.app.extra.PROVISIONING_ACCOUNT_TO_MIGRATE"

EXTRA_PROVISIONING_ADMIN_EXTRAS_BUNDLE

public static final String EXTRA_PROVISIONING_ADMIN_EXTRAS_BUNDLE

A Parcelable extra of type PersistableBundle that is passed directly to the Device Policy Controller after provisioning.

Starting from Build.VERSION_CODES.M, if used with MIME_TYPE_PROVISIONING_NFC as part of NFC managed device provisioning, the NFC message should contain a stringified Properties instance, whose string properties will be converted into a PersistableBundle and passed to the management application after provisioning.

Constant Value: "android.app.extra.PROVISIONING_ADMIN_EXTRAS_BUNDLE"

EXTRA_PROVISIONING_ALLOWED_PROVISIONING_MODES

public static final String EXTRA_PROVISIONING_ALLOWED_PROVISIONING_MODES

An ArrayList of Integer extra specifying the allowed provisioning modes.

This extra will be passed to the admin app's ACTION_GET_PROVISIONING_MODE activity, whose result intent must contain EXTRA_PROVISIONING_MODE set to one of the values in this array.

If the value set to EXTRA_PROVISIONING_MODE is not in the array, provisioning will fail.

Constant Value: "android.app.extra.PROVISIONING_ALLOWED_PROVISIONING_MODES"

EXTRA_PROVISIONING_ALLOW_OFFLINE

public static final String EXTRA_PROVISIONING_ALLOW_OFFLINE

A boolean extra indicating whether offline provisioning should be used.

The default value is false.

Constant Value: "android.app.extra.PROVISIONING_ALLOW_OFFLINE"

EXTRA_PROVISIONING_DEVICE_ADMIN_COMPONENT_NAME

public static final String EXTRA_PROVISIONING_DEVICE_ADMIN_COMPONENT_NAME

A ComponentName extra indicating the device admin receiver of the application that will be set as the Device Policy Controller.

If an application starts provisioning directly via an intent with action ACTION_PROVISION_MANAGED_DEVICE the package name of this component has to match the package name of the application that started provisioning.

This component is set as device owner and active admin when device owner provisioning is started by an intent with action ACTION_PROVISION_MANAGED_DEVICE or by an NFC message containing an NFC record with MIME type MIME_TYPE_PROVISIONING_NFC. For the NFC record, the component name must be flattened to a string, via ComponentName.flattenToShortString().

Constant Value: "android.app.extra.PROVISIONING_DEVICE_ADMIN_COMPONENT_NAME"

EXTRA_PROVISIONING_DEVICE_ADMIN_MINIMUM_VERSION_CODE

public static final String EXTRA_PROVISIONING_DEVICE_ADMIN_MINIMUM_VERSION_CODE

An int extra holding a minimum required version code for the device admin package. If the device admin is already installed on the device, it will only be re-downloaded from EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION if the version of the installed package is less than this version code.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_DEVICE_ADMIN_MINIMUM_VERSION_CODE"

EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_CHECKSUM

public static final String EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_CHECKSUM

A String extra holding the URL-safe base64 encoded SHA-256 hash of the file at download location specified in EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION.

Either this extra or EXTRA_PROVISIONING_DEVICE_ADMIN_SIGNATURE_CHECKSUM must be present. The provided checksum must match the checksum of the file at the download location. If the checksum doesn't match an error will be shown to the user and the user will be asked to factory reset the device.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Note: for devices running Build.VERSION_CODES.LOLLIPOP and Build.VERSION_CODES.LOLLIPOP_MR1 only SHA-1 hash is supported. Starting from Build.VERSION_CODES.M, this parameter accepts SHA-256 in addition to SHA-1. From Build.VERSION_CODES.Q, only SHA-256 hash is supported.

Constant Value: "android.app.extra.PROVISIONING_DEVICE_ADMIN_PACKAGE_CHECKSUM"

EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_COOKIE_HEADER

public static final String EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_COOKIE_HEADER

A String extra holding a http cookie header which should be used in the http request to the url specified in EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_COOKIE_HEADER"

EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION

public static final String EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION

A String extra holding a url that specifies the download location of the device admin package. When not provided it is assumed that the device admin package is already installed.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION"

EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_NAME

public static final String EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_NAME

This constant was deprecated in API level 23.
Use EXTRA_PROVISIONING_DEVICE_ADMIN_COMPONENT_NAME.

A String extra holding the package name of the application that will be set as Device Policy Controller.

When this extra is set, the application must have exactly one device admin receiver. This receiver will be set as the Device Policy Controller.

Constant Value: "android.app.extra.PROVISIONING_DEVICE_ADMIN_PACKAGE_NAME"

EXTRA_PROVISIONING_DEVICE_ADMIN_SIGNATURE_CHECKSUM

public static final String EXTRA_PROVISIONING_DEVICE_ADMIN_SIGNATURE_CHECKSUM

A String extra holding the URL-safe base64 encoded SHA-256 checksum of any signature of the android package archive at the download location specified in EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION.

The signatures of an android package archive can be obtained using PackageManager.getPackageArchiveInfo(String, PackageInfoFlags) with flag PackageManager.GET_SIGNATURES.

Either this extra or EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_CHECKSUM must be present. The provided checksum must match the checksum of any signature of the file at the download location. If the checksum does not match an error will be shown to the user and the user will be asked to factory reset the device.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_DEVICE_ADMIN_SIGNATURE_CHECKSUM"

EXTRA_PROVISIONING_DISCLAIMERS

public static final String EXTRA_PROVISIONING_DISCLAIMERS

A Bundle[] extra consisting of list of disclaimer headers and disclaimer contents.

Each Bundle must have both EXTRA_PROVISIONING_DISCLAIMER_HEADER as disclaimer header, and EXTRA_PROVISIONING_DISCLAIMER_CONTENT as disclaimer content.

The extra typically contains one disclaimer from the company of mobile device management application (MDM), and one disclaimer from the organization.

Call Bundle.putParcelableArray(String, Parcelable[]) to put the Bundle[]

Maximum 3 key-value pairs can be specified. The rest will be ignored.

Can be used in an intent with action ACTION_PROVISION_MANAGED_PROFILE. This extra can also be returned by the admin app when performing the admin-integrated provisioning flow as a result of the ACTION_GET_PROVISIONING_MODE activity.

Constant Value: "android.app.extra.PROVISIONING_DISCLAIMERS"

EXTRA_PROVISIONING_DISCLAIMER_CONTENT

public static final String EXTRA_PROVISIONING_DISCLAIMER_CONTENT

A Uri extra pointing to disclaimer content.

The following URI schemes are accepted:

• content (ContentResolver.SCHEME_CONTENT)
• android.resource (ContentResolver.SCHEME_ANDROID_RESOURCE)

Styled text is supported. This is parsed by Html.fromHtml(String) and displayed in a TextView.

If a content: URI is passed, the intent should also have the flag Intent.FLAG_GRANT_READ_URI_PERMISSION and the uri should be added to the ClipData of the intent.

System apps can also insert a disclaimer by declaring an application-level meta-data in AndroidManifest.xml.

For example:

  <meta-data
      android:name="android.app.extra.PROVISIONING_DISCLAIMER_CONTENT"
      android:resource="@string/disclaimer_content"
 />

This must be accompanied with another extra using the key EXTRA_PROVISIONING_DISCLAIMER_HEADER.

Constant Value: "android.app.extra.PROVISIONING_DISCLAIMER_CONTENT"

EXTRA_PROVISIONING_DISCLAIMER_HEADER

public static final String EXTRA_PROVISIONING_DISCLAIMER_HEADER

A String extra of localized disclaimer header.

The extra is typically the company name of mobile device management application (MDM) or the organization name.

System apps can also insert a disclaimer by declaring an application-level meta-data in AndroidManifest.xml.

For example:

  <meta-data
      android:name="android.app.extra.PROVISIONING_DISCLAIMER_HEADER"
      android:resource="@string/disclaimer_header"
 />

This must be accompanied with another extra using the key EXTRA_PROVISIONING_DISCLAIMER_CONTENT.

Constant Value: "android.app.extra.PROVISIONING_DISCLAIMER_HEADER"

EXTRA_PROVISIONING_EMAIL_ADDRESS

public static final String EXTRA_PROVISIONING_EMAIL_ADDRESS

This constant was deprecated in API level 26.
From Build.VERSION_CODES.O, never used while provisioning the device.

Constant Value: "android.app.extra.PROVISIONING_EMAIL_ADDRESS"

EXTRA_PROVISIONING_IMEI

public static final String EXTRA_PROVISIONING_IMEI

A string extra holding the IMEI (International Mobile Equipment Identity) of the device.

Constant Value: "android.app.extra.PROVISIONING_IMEI"

EXTRA_PROVISIONING_KEEP_ACCOUNT_ON_MIGRATION

public static final String EXTRA_PROVISIONING_KEEP_ACCOUNT_ON_MIGRATION

Boolean extra to indicate that the migrated account should be kept.

If it's set to true, the account will not be removed from the user after it is migrated to the newly created user or profile.

Defaults to false

Constant Value: "android.app.extra.PROVISIONING_KEEP_ACCOUNT_ON_MIGRATION"

EXTRA_PROVISIONING_KEEP_SCREEN_ON

public static final String EXTRA_PROVISIONING_KEEP_SCREEN_ON

This constant was deprecated in API level 34.
from Build.VERSION_CODES.UPSIDE_DOWN_CAKE, the flag wouldn't be functional. The screen is kept on throughout the provisioning flow.

A boolean flag that indicates whether the screen should be on throughout the provisioning flow.

This extra can either be passed as an extra to the ACTION_PROVISION_MANAGED_PROFILE intent, or it can be returned by the admin app when performing the admin-integrated provisioning flow as a result of the ACTION_GET_PROVISIONING_MODE activity.

Constant Value: "android.app.extra.PROVISIONING_KEEP_SCREEN_ON"

EXTRA_PROVISIONING_LEAVE_ALL_SYSTEM_APPS_ENABLED

public static final String EXTRA_PROVISIONING_LEAVE_ALL_SYSTEM_APPS_ENABLED

A Boolean extra that can be used by the mobile device management application to skip the disabling of system apps during provisioning when set to true.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC, an intent with action ACTION_PROVISION_MANAGED_PROFILE that starts profile owner provisioning or set as an extra to the intent result of the ACTION_GET_PROVISIONING_MODE activity.

Constant Value: "android.app.extra.PROVISIONING_LEAVE_ALL_SYSTEM_APPS_ENABLED"

EXTRA_PROVISIONING_LOCALE

public static final String EXTRA_PROVISIONING_LOCALE

A String extra holding the Locale that the device will be set to. Format: xx_yy, where xx is the language code, and yy the country code.

Use only for device owner provisioning. This extra can be returned by the admin app when performing the admin-integrated provisioning flow as a result of the ACTION_GET_PROVISIONING_MODE activity.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_LOCALE"

EXTRA_PROVISIONING_LOCAL_TIME

public static final String EXTRA_PROVISIONING_LOCAL_TIME

A Long extra holding the wall clock time (in milliseconds) to be set on the device's AlarmManager.

Use only for device owner provisioning. This extra can be returned by the admin app when performing the admin-integrated provisioning flow as a result of the ACTION_GET_PROVISIONING_MODE activity.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_LOCAL_TIME"

EXTRA_PROVISIONING_LOGO_URI

public static final String EXTRA_PROVISIONING_LOGO_URI

This constant was deprecated in API level 33.
Logo customization is no longer supported in the provisioning flow.

A Uri extra pointing to a logo image. This image will be shown during the provisioning. If this extra is not passed, a default image will be shown.

The following URI schemes are accepted:

• content (ContentResolver.SCHEME_CONTENT)
• android.resource (ContentResolver.SCHEME_ANDROID_RESOURCE)

It is the responsibility of the caller to provide an image with a reasonable pixel density for the device.

If a content: URI is passed, the intent should also have the flag Intent.FLAG_GRANT_READ_URI_PERMISSION and the uri should be added to the ClipData of the intent.

Constant Value: "android.app.extra.PROVISIONING_LOGO_URI"

EXTRA_PROVISIONING_MAIN_COLOR

public static final String EXTRA_PROVISIONING_MAIN_COLOR

This constant was deprecated in API level 31.
Color customization is no longer supported in the provisioning flow.

A integer extra indicating the predominant color to show during the provisioning. Refer to Color for how the color is represented.

Use with ACTION_PROVISION_MANAGED_PROFILE or ACTION_PROVISION_MANAGED_DEVICE.

Constant Value: "android.app.extra.PROVISIONING_MAIN_COLOR"

EXTRA_PROVISIONING_MODE

public static final String EXTRA_PROVISIONING_MODE

An intent extra holding the provisioning mode returned by the administrator. The value of this extra must be one of the values provided in EXTRA_PROVISIONING_ALLOWED_PROVISIONING_MODES, which is provided as an intent extra to the admin app's ACTION_GET_PROVISIONING_MODE activity.

Constant Value: "android.app.extra.PROVISIONING_MODE"

EXTRA_PROVISIONING_SENSORS_PERMISSION_GRANT_OPT_OUT

public static final String EXTRA_PROVISIONING_SENSORS_PERMISSION_GRANT_OPT_OUT

A boolean extra indicating the admin of a fully-managed device opts out of controlling permission grants for sensor-related permissions, see setPermissionGrantState(android.content.ComponentName, java.lang.String, java.lang.String, int). The default for this extra is false - by default, the admin of a fully-managed device has the ability to grant sensors-related permissions.

Use only for device owner provisioning. This extra can be returned by the admin app when performing the admin-integrated provisioning flow as a result of the ACTION_GET_PROVISIONING_MODE activity.

This extra may also be provided to the admin app via an intent extra for ACTION_GET_PROVISIONING_MODE.

Constant Value: "android.app.extra.PROVISIONING_SENSORS_PERMISSION_GRANT_OPT_OUT"

EXTRA_PROVISIONING_SERIAL_NUMBER

public static final String EXTRA_PROVISIONING_SERIAL_NUMBER

A string extra holding the serial number of the device.

Constant Value: "android.app.extra.PROVISIONING_SERIAL_NUMBER"

EXTRA_PROVISIONING_SHOULD_LAUNCH_RESULT_INTENT

public static final String EXTRA_PROVISIONING_SHOULD_LAUNCH_RESULT_INTENT

A boolean extra that determines whether the provisioning flow should launch the resulting launch intent, if one is supplied by the device policy management role holder via EXTRA_RESULT_LAUNCH_INTENT. Default value is false.

If true, the resulting intent will be launched by the provisioning flow, if one is supplied by the device policy management role holder.

If false, the resulting intent will be returned as EXTRA_RESULT_LAUNCH_INTENT to the provisioning initiator, if one is supplied by the device manager role holder. It will be the responsibility of the provisioning initiator to launch this Intent after provisioning completes.

This extra is respected when provided via the provisioning intent actions such as ACTION_PROVISION_MANAGED_PROFILE.

Constant Value: "android.app.extra.PROVISIONING_SHOULD_LAUNCH_RESULT_INTENT"

EXTRA_PROVISIONING_SKIP_EDUCATION_SCREENS

public static final String EXTRA_PROVISIONING_SKIP_EDUCATION_SCREENS

A boolean extra indicating if the education screens from the provisioning flow should be skipped. If unspecified, defaults to false.

This extra can be set in the following ways:

• By the admin app when performing the admin-integrated provisioning flow as a result of the ACTION_GET_PROVISIONING_MODE activity
• For managed account enrollment

If the education screens are skipped, it is the admin application's responsibility to display its own user education screens.

Constant Value: "android.app.extra.PROVISIONING_SKIP_EDUCATION_SCREENS"

EXTRA_PROVISIONING_SKIP_ENCRYPTION

public static final String EXTRA_PROVISIONING_SKIP_ENCRYPTION

A boolean extra indicating whether device encryption can be skipped as part of provisioning.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC or an intent with action ACTION_PROVISION_MANAGED_DEVICE that starts device owner provisioning.

From Build.VERSION_CODES.N onwards, this is also supported for an intent with action ACTION_PROVISION_MANAGED_PROFILE.

Constant Value: "android.app.extra.PROVISIONING_SKIP_ENCRYPTION"

EXTRA_PROVISIONING_SKIP_USER_CONSENT

public static final String EXTRA_PROVISIONING_SKIP_USER_CONSENT

This constant was deprecated in API level 31.
this extra is no longer relevant as device owners cannot create managed profiles

A boolean extra indicating if the user consent steps from the provisioning flow should be skipped.

If unspecified, defaults to false.

Constant Value: "android.app.extra.PROVISIONING_SKIP_USER_CONSENT"

EXTRA_PROVISIONING_TIME_ZONE

public static final String EXTRA_PROVISIONING_TIME_ZONE

A String extra holding the time zone AlarmManager that the device will be set to.

Use only for device owner provisioning. This extra can be returned by the admin app when performing the admin-integrated provisioning flow as a result of the ACTION_GET_PROVISIONING_MODE activity.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_TIME_ZONE"

EXTRA_PROVISIONING_USE_MOBILE_DATA

public static final String EXTRA_PROVISIONING_USE_MOBILE_DATA

A boolean extra indicating if mobile data should be used during the provisioning flow for downloading the admin app. If EXTRA_PROVISIONING_WIFI_SSID is also specified, wifi network will be used instead.

Default value is false.

If this extra is set to true and EXTRA_PROVISIONING_WIFI_SSID is not specified, this extra has different behaviour depending on the way provisioning is triggered:

• For provisioning started via a QR code or an NFC tag, mobile data is always used for downloading the admin app.
• For all other provisioning methods, a mobile data connection check is made at the start of provisioning. If mobile data is connected at that point, the admin app download will happen using mobile data. If mobile data is not connected at that point, the end-user will be asked to pick a wifi network and the admin app download will proceed over wifi.

Constant Value: "android.app.extra.PROVISIONING_USE_MOBILE_DATA"

EXTRA_PROVISIONING_WIFI_ANONYMOUS_IDENTITY

public static final String EXTRA_PROVISIONING_WIFI_ANONYMOUS_IDENTITY

The anonymous identity of the wifi network in EXTRA_PROVISIONING_WIFI_SSID. This is only used if the EXTRA_PROVISIONING_WIFI_SECURITY_TYPE is EAP.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_ANONYMOUS_IDENTITY"

EXTRA_PROVISIONING_WIFI_CA_CERTIFICATE

public static final String EXTRA_PROVISIONING_WIFI_CA_CERTIFICATE

The CA certificate of the wifi network in EXTRA_PROVISIONING_WIFI_SSID. This should be an X.509 certificate Base64 encoded DER format, ie. PEM representation of a certificate without header, footer and line breaks. More information This is only used if the EXTRA_PROVISIONING_WIFI_SECURITY_TYPE is EAP.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_CA_CERTIFICATE"

EXTRA_PROVISIONING_WIFI_DOMAIN

public static final String EXTRA_PROVISIONING_WIFI_DOMAIN

The domain of the wifi network in EXTRA_PROVISIONING_WIFI_SSID. This is only used if the EXTRA_PROVISIONING_WIFI_SECURITY_TYPE is EAP.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_DOMAIN"

EXTRA_PROVISIONING_WIFI_EAP_METHOD

public static final String EXTRA_PROVISIONING_WIFI_EAP_METHOD

The EAP method of the wifi network in EXTRA_PROVISIONING_WIFI_SSID and could be one of PEAP, TLS, TTLS, PWD, SIM, AKA or AKA_PRIME. This is only used if the EXTRA_PROVISIONING_WIFI_SECURITY_TYPE is EAP.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_EAP_METHOD"

EXTRA_PROVISIONING_WIFI_HIDDEN

public static final String EXTRA_PROVISIONING_WIFI_HIDDEN

A boolean extra indicating whether the wifi network in EXTRA_PROVISIONING_WIFI_SSID is hidden or not.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_HIDDEN"

EXTRA_PROVISIONING_WIFI_IDENTITY

public static final String EXTRA_PROVISIONING_WIFI_IDENTITY

The identity of the wifi network in EXTRA_PROVISIONING_WIFI_SSID. This is only used if the EXTRA_PROVISIONING_WIFI_SECURITY_TYPE is EAP.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_IDENTITY"

EXTRA_PROVISIONING_WIFI_PAC_URL

public static final String EXTRA_PROVISIONING_WIFI_PAC_URL

A String extra holding the proxy auto-config (PAC) URL for the wifi network in EXTRA_PROVISIONING_WIFI_SSID.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_PAC_URL"

EXTRA_PROVISIONING_WIFI_PASSWORD

public static final String EXTRA_PROVISIONING_WIFI_PASSWORD

A String extra holding the password of the wifi network in EXTRA_PROVISIONING_WIFI_SSID.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_PASSWORD"

EXTRA_PROVISIONING_WIFI_PHASE2_AUTH

public static final String EXTRA_PROVISIONING_WIFI_PHASE2_AUTH

The phase 2 authentication of the wifi network in EXTRA_PROVISIONING_WIFI_SSID and could be one of NONE, PAP, MSCHAP, MSCHAPV2, GTC, SIM, AKA or AKA_PRIME. This is only used if the EXTRA_PROVISIONING_WIFI_SECURITY_TYPE is EAP.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_PHASE2_AUTH"

EXTRA_PROVISIONING_WIFI_PROXY_BYPASS

public static final String EXTRA_PROVISIONING_WIFI_PROXY_BYPASS

A String extra holding the proxy bypass for the wifi network in EXTRA_PROVISIONING_WIFI_SSID.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_PROXY_BYPASS"

EXTRA_PROVISIONING_WIFI_PROXY_HOST

public static final String EXTRA_PROVISIONING_WIFI_PROXY_HOST

A String extra holding the proxy host for the wifi network in EXTRA_PROVISIONING_WIFI_SSID.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_PROXY_HOST"

EXTRA_PROVISIONING_WIFI_PROXY_PORT

public static final String EXTRA_PROVISIONING_WIFI_PROXY_PORT

An int extra holding the proxy port for the wifi network in EXTRA_PROVISIONING_WIFI_SSID.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_PROXY_PORT"

EXTRA_PROVISIONING_WIFI_SECURITY_TYPE

public static final String EXTRA_PROVISIONING_WIFI_SECURITY_TYPE

A String extra indicating the security type of the wifi network in EXTRA_PROVISIONING_WIFI_SSID and could be one of NONE, WPA, WEP or EAP.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_SECURITY_TYPE"

EXTRA_PROVISIONING_WIFI_SSID

public static final String EXTRA_PROVISIONING_WIFI_SSID

A String extra holding the ssid of the wifi network that should be used during nfc device owner provisioning for downloading the mobile device management application.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_SSID"

EXTRA_PROVISIONING_WIFI_USER_CERTIFICATE

public static final String EXTRA_PROVISIONING_WIFI_USER_CERTIFICATE

The user certificate of the wifi network in EXTRA_PROVISIONING_WIFI_SSID. This should be an X.509 certificate and private key Base64 encoded DER format, ie. PEM representation of a certificate and key without header, footer and line breaks. More information This is only used if the EXTRA_PROVISIONING_WIFI_SECURITY_TYPE is EAP.

Use in an NFC record with MIME_TYPE_PROVISIONING_NFC that starts device owner provisioning via an NFC bump. It can also be used for QR code provisioning.

Constant Value: "android.app.extra.PROVISIONING_WIFI_USER_CERTIFICATE"

EXTRA_RESOURCE_IDS

public static final String EXTRA_RESOURCE_IDS

An integer array extra for ACTION_DEVICE_POLICY_RESOURCE_UPDATED to indicate which resource IDs (i.e. strings and drawables) have been updated.

Constant Value: "android.app.extra.RESOURCE_IDS"

EXTRA_RESOURCE_TYPE

public static final String EXTRA_RESOURCE_TYPE

An int extra for ACTION_DEVICE_POLICY_RESOURCE_UPDATED to indicate the type of the resource being updated, the type can be EXTRA_RESOURCE_TYPE_DRAWABLE or EXTRA_RESOURCE_TYPE_STRING

Constant Value: "android.app.extra.RESOURCE_TYPE"

EXTRA_RESOURCE_TYPE_DRAWABLE

public static final int EXTRA_RESOURCE_TYPE_DRAWABLE

A int value for EXTRA_RESOURCE_TYPE to indicate that a resource of type Drawable is being updated.

Constant Value: 1 (0x00000001)

EXTRA_RESOURCE_TYPE_STRING

public static final int EXTRA_RESOURCE_TYPE_STRING

A int value for EXTRA_RESOURCE_TYPE to indicate that a resource of type String is being updated.

Constant Value: 2 (0x00000002)

EXTRA_RESULT_LAUNCH_INTENT

public static final String EXTRA_RESULT_LAUNCH_INTENT

An Intent result extra specifying the Intent to be launched after provisioning is finalized.

If EXTRA_PROVISIONING_SHOULD_LAUNCH_RESULT_INTENT is set to false, this result will be supplied as part of the result Intent for provisioning actions such as ACTION_PROVISION_MANAGED_PROFILE. This result will also be supplied as part of the result Intent for the device policy management role holder provisioning actions.

Constant Value: "android.app.extra.RESULT_LAUNCH_INTENT"

FLAG_EVICT_CREDENTIAL_ENCRYPTION_KEY

public static final int FLAG_EVICT_CREDENTIAL_ENCRYPTION_KEY

Flag for lockNow(int): also evict the user's credential encryption key from the keyring. The user's credential will need to be entered again in order to derive the credential encryption key that will be stored back in the keyring for future use.

This flag can only be used by a profile owner when locking a managed profile when getStorageEncryptionStatus() returns ENCRYPTION_STATUS_ACTIVE_PER_USER.

In order to secure user data, the user will be stopped and restarted so apps should wait until they are next run to perform further actions.

Constant Value: 1 (0x00000001)

FLAG_MANAGED_CAN_ACCESS_PARENT

public static final int FLAG_MANAGED_CAN_ACCESS_PARENT

Flag used by addCrossProfileIntentFilter(ComponentName, IntentFilter, int) to allow activities in the managed profile to access intents sent from the parent profile. That is, when an app in the parent profile calls Activity.startActivity(Intent), the intent can be resolved by a matching activity in the managed profile.

Constant Value: 2 (0x00000002)

FLAG_PARENT_CAN_ACCESS_MANAGED

public static final int FLAG_PARENT_CAN_ACCESS_MANAGED

Flag used by addCrossProfileIntentFilter(ComponentName, IntentFilter, int) to allow activities in the parent profile to access intents sent from the managed profile. That is, when an app in the managed profile calls Activity.startActivity(Intent), the intent can be resolved by a matching activity in the parent profile.

Constant Value: 1 (0x00000001)

ID_TYPE_BASE_INFO

public static final int ID_TYPE_BASE_INFO

Specifies that the device should attest its manufacturer details. For use with generateKeyPair(ComponentName, String, KeyGenParameterSpec, int).

Constant Value: 1 (0x00000001)

ID_TYPE_IMEI

public static final int ID_TYPE_IMEI

Specifies that the device should attest its IMEI. For use with generateKeyPair(ComponentName, String, KeyGenParameterSpec, int).

Constant Value: 4 (0x00000004)

ID_TYPE_INDIVIDUAL_ATTESTATION

public static final int ID_TYPE_INDIVIDUAL_ATTESTATION

Specifies that the device should attest using an individual attestation certificate. For use with generateKeyPair(ComponentName, String, KeyGenParameterSpec, int).

Constant Value: 16 (0x00000010)

ID_TYPE_MEID

public static final int ID_TYPE_MEID

Specifies that the device should attest its MEID. For use with generateKeyPair(ComponentName, String, KeyGenParameterSpec, int).

Constant Value: 8 (0x00000008)

ID_TYPE_SERIAL

public static final int ID_TYPE_SERIAL

Specifies that the device should attest its serial number. For use with generateKeyPair(ComponentName, String, KeyGenParameterSpec, int).

Constant Value: 2 (0x00000002)

INSTALLKEY_REQUEST_CREDENTIALS_ACCESS

public static final int INSTALLKEY_REQUEST_CREDENTIALS_ACCESS

Specifies that the calling app should be granted access to the installed credentials immediately. Otherwise, access to the credentials will be gated by user approval. For use with installKeyPair(android.content.ComponentName, java.security.PrivateKey, java.security.cert.Certificate[], java.lang.String, int)

Constant Value: 1 (0x00000001)

INSTALLKEY_SET_USER_SELECTABLE

public static final int INSTALLKEY_SET_USER_SELECTABLE

Specifies that a user can select the key via the Certificate Selection prompt. If this flag is not set when calling installKeyPair(ComponentName, PrivateKey, Certificate, String), the key can only be granted access by implementing DeviceAdminReceiver.onChoosePrivateKeyAlias(Context, Intent, int, Uri, String). For use with installKeyPair(android.content.ComponentName, java.security.PrivateKey, java.security.cert.Certificate[], java.lang.String, int)

Constant Value: 2 (0x00000002)

KEYGUARD_DISABLE_BIOMETRICS

public static final int KEYGUARD_DISABLE_BIOMETRICS

Disable all biometric authentication on keyguard secure screens (e.g. PIN/Pattern/Password).

Constant Value: 416 (0x000001a0)

KEYGUARD_DISABLE_FACE

public static final int KEYGUARD_DISABLE_FACE

Disable face authentication on keyguard secure screens (e.g. PIN/Pattern/Password).

Constant Value: 128 (0x00000080)

KEYGUARD_DISABLE_FEATURES_ALL

public static final int KEYGUARD_DISABLE_FEATURES_ALL

Disable all current and future keyguard customizations.

Constant Value: 2147483647 (0x7fffffff)

KEYGUARD_DISABLE_FEATURES_NONE

public static final int KEYGUARD_DISABLE_FEATURES_NONE

Widgets are enabled in keyguard

Constant Value: 0 (0x00000000)

KEYGUARD_DISABLE_FINGERPRINT

public static final int KEYGUARD_DISABLE_FINGERPRINT

Disable fingerprint authentication on keyguard secure screens (e.g. PIN/Pattern/Password).

Constant Value: 32 (0x00000020)

KEYGUARD_DISABLE_IRIS

public static final int KEYGUARD_DISABLE_IRIS

Disable iris authentication on keyguard secure screens (e.g. PIN/Pattern/Password).

Constant Value: 256 (0x00000100)

KEYGUARD_DISABLE_REMOTE_INPUT

public static final int KEYGUARD_DISABLE_REMOTE_INPUT

This constant was deprecated in API level 33.
This flag was added in version Build.VERSION_CODES.N, but it never had any effect.

Disable text entry into notifications on secure keyguard screens (e.g. PIN/Pattern/Password).

Constant Value: 64 (0x00000040)

KEYGUARD_DISABLE_SECURE_CAMERA

public static final int KEYGUARD_DISABLE_SECURE_CAMERA

Disable the camera on secure keyguard screens (e.g. PIN/Pattern/Password)

Constant Value: 2 (0x00000002)

KEYGUARD_DISABLE_SECURE_NOTIFICATIONS

public static final int KEYGUARD_DISABLE_SECURE_NOTIFICATIONS

Disable showing all notifications on secure keyguard screens (e.g. PIN/Pattern/Password)

Constant Value: 4 (0x00000004)

KEYGUARD_DISABLE_SHORTCUTS_ALL

public static final int KEYGUARD_DISABLE_SHORTCUTS_ALL

Disable all keyguard shortcuts.

Constant Value: 512 (0x00000200)

KEYGUARD_DISABLE_TRUST_AGENTS

public static final int KEYGUARD_DISABLE_TRUST_AGENTS

Disable trust agents on secure keyguard screens (e.g. PIN/Pattern/Password). By setting this flag alone, all trust agents are disabled. If the admin then wants to allowlist specific features of some trust agent, setTrustAgentConfiguration(ComponentName, ComponentName, PersistableBundle) can be used in conjuction to set trust-agent-specific configurations.

Constant Value: 16 (0x00000010)

KEYGUARD_DISABLE_UNREDACTED_NOTIFICATIONS

public static final int KEYGUARD_DISABLE_UNREDACTED_NOTIFICATIONS

Only allow redacted notifications on secure keyguard screens (e.g. PIN/Pattern/Password)

Constant Value: 8 (0x00000008)

KEYGUARD_DISABLE_WIDGETS_ALL

public static final int KEYGUARD_DISABLE_WIDGETS_ALL

Disable all keyguard widgets. Has no effect between Build.VERSION_CODES.LOLLIPOP and Build.VERSION_CODES.UPSIDE_DOWN_CAKE (both inclusive), since keyguard widget is only supported on Android versions lower than 5.0 and versions higher than 14.

Constant Value: 1 (0x00000001)

LEAVE_ALL_SYSTEM_APPS_ENABLED

public static final int LEAVE_ALL_SYSTEM_APPS_ENABLED

Flag used by createAndManageUser(ComponentName, String, ComponentName, PersistableBundle, int) to specify that the newly created user should skip the disabling of system apps during provisioning.

Constant Value: 16 (0x00000010)

LOCK_TASK_FEATURE_BLOCK_ACTIVITY_START_IN_TASK

public static final int LOCK_TASK_FEATURE_BLOCK_ACTIVITY_START_IN_TASK

Enable blocking of non-allowlisted activities from being started into a locked task.

Constant Value: 64 (0x00000040)

LOCK_TASK_FEATURE_GLOBAL_ACTIONS

public static final int LOCK_TASK_FEATURE_GLOBAL_ACTIONS

Enable the global actions dialog during LockTask mode. This is the dialog that shows up when the user long-presses the power button, for example. Note that the user may not be able to power off the device if this flag is not set.

This flag is enabled by default until setLockTaskFeatures(android.content.ComponentName, int) is called for the first time.

Constant Value: 16 (0x00000010)

LOCK_TASK_FEATURE_HOME

public static final int LOCK_TASK_FEATURE_HOME

Enable the Home button during LockTask mode. Note that if a custom launcher is used, it has to be registered as the default launcher with addPersistentPreferredActivity(android.content.ComponentName, android.content.IntentFilter, android.content.ComponentName), and its package needs to be allowlisted for LockTask with setLockTaskPackages(android.content.ComponentName, java.lang.String[]).

Constant Value: 4 (0x00000004)

LOCK_TASK_FEATURE_KEYGUARD

public static final int LOCK_TASK_FEATURE_KEYGUARD

Enable the keyguard during LockTask mode. Note that if the keyguard is already disabled with setKeyguardDisabled(android.content.ComponentName, boolean), setting this flag will have no effect. If this flag is not set, the keyguard will not be shown even if the user has a lock screen credential.

Constant Value: 32 (0x00000020)

LOCK_TASK_FEATURE_NONE

public static final int LOCK_TASK_FEATURE_NONE

Disable all configurable SystemUI features during LockTask mode. This includes,

• system info area in the status bar (connectivity icons, clock, etc.)
• notifications (including alerts, icons, and the notification shade)
• Home button
• Recents button and UI
• global actions menu (i.e. power button menu)
• keyguard

Constant Value: 0 (0x00000000)

LOCK_TASK_FEATURE_NOTIFICATIONS

public static final int LOCK_TASK_FEATURE_NOTIFICATIONS

Enable notifications during LockTask mode. This includes notification icons on the status bar, heads-up notifications, and the expandable notification shade. Note that the Quick Settings panel remains disabled. This feature flag can only be used in combination with LOCK_TASK_FEATURE_HOME. setLockTaskFeatures(android.content.ComponentName, int) throws an IllegalArgumentException if this feature flag is defined without LOCK_TASK_FEATURE_HOME.

Constant Value: 2 (0x00000002)

LOCK_TASK_FEATURE_OVERVIEW

public static final int LOCK_TASK_FEATURE_OVERVIEW

Enable the Overview button and the Overview screen during LockTask mode. This feature flag can only be used in combination with LOCK_TASK_FEATURE_HOME, and setLockTaskFeatures(android.content.ComponentName, int) will throw an IllegalArgumentException if this feature flag is defined without LOCK_TASK_FEATURE_HOME.

Constant Value: 8 (0x00000008)

LOCK_TASK_FEATURE_SYSTEM_INFO

public static final int LOCK_TASK_FEATURE_SYSTEM_INFO

Enable the system info area in the status bar during LockTask mode. The system info area usually occupies the right side of the status bar (although this can differ across OEMs). It includes all system information indicators, such as date and time, connectivity, battery, vibration mode, etc.

Constant Value: 1 (0x00000001)

MAKE_USER_EPHEMERAL

public static final int MAKE_USER_EPHEMERAL

Flag used by createAndManageUser(ComponentName, String, ComponentName, PersistableBundle, int) to specify that the user should be created ephemeral. Ephemeral users will be removed after switching to another user or rebooting the device.

Constant Value: 2 (0x00000002)

MIME_TYPE_PROVISIONING_NFC

public static final String MIME_TYPE_PROVISIONING_NFC

This MIME type is used for starting the device owner provisioning.

During device owner provisioning a device admin app is set as the owner of the device. A device owner has full control over the device. The device owner can not be modified by the user and the only way of resetting the device is if the device owner app calls a factory reset.

A typical use case would be a device that is owned by a company, but used by either an employee or client.

The NFC message must be sent to an unprovisioned device.

The NFC record must contain a serialized Properties object which contains the following properties:

• EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_NAME
• EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_LOCATION, optional
• EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_DOWNLOAD_COOKIE_HEADER, optional
• EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_CHECKSUM, optional
• EXTRA_PROVISIONING_LOCAL_TIME (convert to String), optional
• EXTRA_PROVISIONING_TIME_ZONE, optional
• EXTRA_PROVISIONING_LOCALE, optional
• EXTRA_PROVISIONING_WIFI_SSID, optional
• EXTRA_PROVISIONING_WIFI_HIDDEN (convert to String), optional
• EXTRA_PROVISIONING_WIFI_SECURITY_TYPE, optional
• EXTRA_PROVISIONING_WIFI_PASSWORD, optional
• EXTRA_PROVISIONING_WIFI_PROXY_HOST, optional
• EXTRA_PROVISIONING_WIFI_PROXY_PORT (convert to String), optional
• EXTRA_PROVISIONING_WIFI_PROXY_BYPASS, optional
• EXTRA_PROVISIONING_WIFI_PAC_URL, optional
• EXTRA_PROVISIONING_ADMIN_EXTRAS_BUNDLE, optional, supported from Build.VERSION_CODES.M
• EXTRA_PROVISIONING_WIFI_EAP_METHOD, optional, supported from Build.VERSION_CODES.Q
• EXTRA_PROVISIONING_WIFI_PHASE2_AUTH, optional, supported from Build.VERSION_CODES.Q
• EXTRA_PROVISIONING_WIFI_CA_CERTIFICATE, optional, supported from Build.VERSION_CODES.Q
• EXTRA_PROVISIONING_WIFI_USER_CERTIFICATE, optional, supported from Build.VERSION_CODES.Q
• EXTRA_PROVISIONING_WIFI_IDENTITY, optional, supported from Build.VERSION_CODES.Q
• EXTRA_PROVISIONING_WIFI_ANONYMOUS_IDENTITY, optional, supported from Build.VERSION_CODES.Q
• EXTRA_PROVISIONING_WIFI_DOMAIN, optional, supported from Build.VERSION_CODES.Q

As of Build.VERSION_CODES.M, the properties should contain EXTRA_PROVISIONING_DEVICE_ADMIN_COMPONENT_NAME instead of EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_NAME, (although specifying only EXTRA_PROVISIONING_DEVICE_ADMIN_PACKAGE_NAME is still supported).

Constant Value: "application/com.android.managedprovisioning"

MTE_DISABLED

public static final int MTE_DISABLED

Require that MTE be disabled on the device. Can be set by a device owner.

Constant Value: 2 (0x00000002)

MTE_ENABLED

public static final int MTE_ENABLED

Require that MTE be enabled on the device, if supported. Can be set by a device owner or a profile owner of an organization-owned managed profile.

Constant Value: 1 (0x00000001)

MTE_NOT_CONTROLLED_BY_POLICY

public static final int MTE_NOT_CONTROLLED_BY_POLICY

Allow the user to choose whether to enable MTE on the device.

Constant Value: 0 (0x00000000)

NEARBY_STREAMING_DISABLED

public static final int NEARBY_STREAMING_DISABLED

Indicates that nearby streaming is disabled.

Constant Value: 1 (0x00000001)

NEARBY_STREAMING_ENABLED

public static final int NEARBY_STREAMING_ENABLED

Indicates that nearby streaming is enabled.

Constant Value: 2 (0x00000002)

NEARBY_STREAMING_NOT_CONTROLLED_BY_POLICY

public static final int NEARBY_STREAMING_NOT_CONTROLLED_BY_POLICY

Indicates that nearby streaming is not controlled by policy, which means nearby streaming is allowed.

Constant Value: 0 (0x00000000)

NEARBY_STREAMING_SAME_MANAGED_ACCOUNT_ONLY

public static final int NEARBY_STREAMING_SAME_MANAGED_ACCOUNT_ONLY

Indicates that nearby streaming is enabled only to devices offering a comparable level of security, with the same authenticated managed account.

Constant Value: 3 (0x00000003)

OPERATION_SAFETY_REASON_DRIVING_DISTRACTION

public static final int OPERATION_SAFETY_REASON_DRIVING_DISTRACTION

Indicates that a UnsafeStateException was thrown because the operation would distract the driver of the vehicle.

Constant Value: 1 (0x00000001)

PASSWORD_COMPLEXITY_HIGH

public static final int PASSWORD_COMPLEXITY_HIGH

Constant for getPasswordComplexity() and setRequiredPasswordComplexity(int). Define the high password complexity band as:

• PIN with no repeating (4444) or ordered (1234, 4321, 2468) sequences, length at least 8
• alphabetic, length at least 6
• alphanumeric, length at least 6

When returned from getPasswordComplexity(), the constant represents the exact complexity band the password is in. When passed to {@link #setRequiredPasswordComplexity(int), it sets the minimum complexity band which the password must meet.

Constant Value: 327680 (0x00050000)

PASSWORD_COMPLEXITY_LOW

public static final int PASSWORD_COMPLEXITY_LOW

Constant for getPasswordComplexity() and setRequiredPasswordComplexity(int). Define the low password complexity band as:

• pattern
• PIN with repeating (4444) or ordered (1234, 4321, 2468) sequences

When returned from getPasswordComplexity(), the constant represents the exact complexity band the password is in. When passed to {@link #setRequiredPasswordComplexity(int), it sets the minimum complexity band which the password must meet.

Constant Value: 65536 (0x00010000)

PASSWORD_COMPLEXITY_MEDIUM

public static final int PASSWORD_COMPLEXITY_MEDIUM

Constant for getPasswordComplexity() and setRequiredPasswordComplexity(int). Define the medium password complexity band as:

• PIN with no repeating (4444) or ordered (1234, 4321, 2468) sequences, length at least 4
• alphabetic, length at least 4
• alphanumeric, length at least 4

When returned from getPasswordComplexity(), the constant represents the exact complexity band the password is in. When passed to {@link #setRequiredPasswordComplexity(int), it sets the minimum complexity band which the password must meet.

Constant Value: 196608 (0x00030000)

PASSWORD_COMPLEXITY_NONE

public static final int PASSWORD_COMPLEXITY_NONE

Constant for getPasswordComplexity() and setRequiredPasswordComplexity(int): no password.

When returned from getPasswordComplexity(), the constant represents the exact complexity band the password is in. When passed to {@link #setRequiredPasswordComplexity(int), it sets the minimum complexity band which the password must meet.

Constant Value: 0 (0x00000000)

PASSWORD_QUALITY_ALPHABETIC

public static final int PASSWORD_QUALITY_ALPHABETIC

Constant for setPasswordQuality(ComponentName, int): the user must have entered a password containing at least alphabetic (or other symbol) characters. Note that quality constants are ordered so that higher values are more restrictive.

Constant Value: 262144 (0x00040000)

PASSWORD_QUALITY_ALPHANUMERIC

public static final int PASSWORD_QUALITY_ALPHANUMERIC

Constant for setPasswordQuality(ComponentName, int): the user must have entered a password containing at least both> numeric and alphabetic (or other symbol) characters. Note that quality constants are ordered so that higher values are more restrictive.

Constant Value: 327680 (0x00050000)

PASSWORD_QUALITY_BIOMETRIC_WEAK

public static final int PASSWORD_QUALITY_BIOMETRIC_WEAK

Constant for setPasswordQuality(ComponentName, int): the policy allows for low-security biometric recognition technology. This implies technologies that can recognize the identity of an individual to about a 3 digit PIN (false detection is less than 1 in 1,000). Note that quality constants are ordered so that higher values are more restrictive.

Constant Value: 32768 (0x00008000)

PASSWORD_QUALITY_COMPLEX

public static final int PASSWORD_QUALITY_COMPLEX

Constant for setPasswordQuality(ComponentName, int): allows the admin to set precisely how many characters of various types the password should contain to satisfy the policy. The admin should set these requirements via setPasswordMinimumLetters(ComponentName, int), setPasswordMinimumNumeric(ComponentName, int), setPasswordMinimumSymbols(ComponentName, int), setPasswordMinimumUpperCase(ComponentName, int), setPasswordMinimumLowerCase(ComponentName, int), setPasswordMinimumNonLetter(ComponentName, int), and setPasswordMinimumLength(ComponentName, int). Note that quality constants are ordered so that higher values are more restrictive.

Constant Value: 393216 (0x00060000)

PASSWORD_QUALITY_NUMERIC

public static final int PASSWORD_QUALITY_NUMERIC

Constant for setPasswordQuality(ComponentName, int): the user must have entered a password containing at least numeric characters. Note that quality constants are ordered so that higher values are more restrictive.

Constant Value: 131072 (0x00020000)

PASSWORD_QUALITY_NUMERIC_COMPLEX

public static final int PASSWORD_QUALITY_NUMERIC_COMPLEX

Constant for setPasswordQuality(ComponentName, int): the user must have entered a password containing at least numeric characters with no repeating (4444) or ordered (1234, 4321, 2468) sequences. Note that quality constants are ordered so that higher values are more restrictive.

Constant Value: 196608 (0x00030000)

PASSWORD_QUALITY_SOMETHING

public static final int PASSWORD_QUALITY_SOMETHING

Constant for setPasswordQuality(ComponentName, int): the policy requires some kind of password or pattern, but doesn't care what it is. Note that quality constants are ordered so that higher values are more restrictive.

Constant Value: 65536 (0x00010000)

PASSWORD_QUALITY_UNSPECIFIED

public static final int PASSWORD_QUALITY_UNSPECIFIED

Constant for setPasswordQuality(ComponentName, int): the policy has no requirements for the password. Note that quality constants are ordered so that higher values are more restrictive.

Constant Value: 0 (0x00000000)

PERMISSION_GRANT_STATE_DEFAULT

public static final int PERMISSION_GRANT_STATE_DEFAULT

Runtime permission state: The user can manage the permission through the UI.

Constant Value: 0 (0x00000000)

PERMISSION_GRANT_STATE_DENIED

public static final int PERMISSION_GRANT_STATE_DENIED

Runtime permission state: The permission is denied to the app and the user cannot manage the permission through the UI.

Constant Value: 2 (0x00000002)

PERMISSION_GRANT_STATE_GRANTED

public static final int PERMISSION_GRANT_STATE_GRANTED

Runtime permission state: The permission is granted to the app and the user cannot manage the permission through the UI.

Constant Value: 1 (0x00000001)

PERMISSION_POLICY_AUTO_DENY

public static final int PERMISSION_POLICY_AUTO_DENY

Permission policy to always deny new permission requests for runtime permissions. Already granted or denied permissions are not affected by this.

Constant Value: 2 (0x00000002)

PERMISSION_POLICY_AUTO_GRANT

public static final int PERMISSION_POLICY_AUTO_GRANT

Permission policy to always grant new permission requests for runtime permissions. Already granted or denied permissions are not affected by this.

Constant Value: 1 (0x00000001)

PERMISSION_POLICY_PROMPT

public static final int PERMISSION_POLICY_PROMPT

Permission policy to prompt user for new permission requests for runtime permissions. Already granted or denied permissions are not affected by this.

Constant Value: 0 (0x00000000)

PERSONAL_APPS_NOT_SUSPENDED

public static final int PERSONAL_APPS_NOT_SUSPENDED

Return value for getPersonalAppsSuspendedReasons(ComponentName) when personal apps are not suspended.

Constant Value: 0 (0x00000000)

PERSONAL_APPS_SUSPENDED_EXPLICITLY

public static final int PERSONAL_APPS_SUSPENDED_EXPLICITLY

Flag for getPersonalAppsSuspendedReasons(ComponentName) return value. Set when personal apps are suspended by an admin explicitly via setPersonalAppsSuspended(ComponentName, boolean).

Constant Value: 1 (0x00000001)

PERSONAL_APPS_SUSPENDED_PROFILE_TIMEOUT

public static final int PERSONAL_APPS_SUSPENDED_PROFILE_TIMEOUT

Flag for getPersonalAppsSuspendedReasons(ComponentName) return value. Set when personal apps are suspended by framework because managed profile was off for longer than allowed by policy.

Constant Value: 2 (0x00000002)

POLICY_DISABLE_CAMERA

public static final String POLICY_DISABLE_CAMERA

Constant to indicate the feature of disabling the camera. Used as argument to createAdminSupportIntent(java.lang.String).

Constant Value: "policy_disable_camera"

POLICY_DISABLE_SCREEN_CAPTURE

public static final String POLICY_DISABLE_SCREEN_CAPTURE

Constant to indicate the feature of disabling screen captures. Used as argument to createAdminSupportIntent(java.lang.String).

Constant Value: "policy_disable_screen_capture"

PRIVATE_DNS_MODE_OFF

public static final int PRIVATE_DNS_MODE_OFF

Specifies that Private DNS was turned off completely.

Constant Value: 1 (0x00000001)

PRIVATE_DNS_MODE_OPPORTUNISTIC

public static final int PRIVATE_DNS_MODE_OPPORTUNISTIC

Specifies that the device owner requested opportunistic DNS over TLS

Constant Value: 2 (0x00000002)

PRIVATE_DNS_MODE_PROVIDER_HOSTNAME

public static final int PRIVATE_DNS_MODE_PROVIDER_HOSTNAME

Specifies that the device owner configured a specific host to use for Private DNS.

Constant Value: 3 (0x00000003)

PRIVATE_DNS_MODE_UNKNOWN

public static final int PRIVATE_DNS_MODE_UNKNOWN

Specifies that the Private DNS setting is in an unknown state.

Constant Value: 0 (0x00000000)

PRIVATE_DNS_SET_ERROR_FAILURE_SETTING

public static final int PRIVATE_DNS_SET_ERROR_FAILURE_SETTING

General failure to set the Private DNS mode, not due to one of the reasons listed above.

Constant Value: 2 (0x00000002)

PRIVATE_DNS_SET_ERROR_HOST_NOT_SERVING

public static final int PRIVATE_DNS_SET_ERROR_HOST_NOT_SERVING

If the privateDnsHost provided was of a valid hostname but that host was found to not support DNS-over-TLS.

Constant Value: 1 (0x00000001)

PRIVATE_DNS_SET_NO_ERROR

public static final int PRIVATE_DNS_SET_NO_ERROR

The selected mode has been set successfully. If the mode is PRIVATE_DNS_MODE_PROVIDER_HOSTNAME then it implies the supplied host is valid and reachable.

Constant Value: 0 (0x00000000)

PROVISIONING_MODE_FULLY_MANAGED_DEVICE

public static final int PROVISIONING_MODE_FULLY_MANAGED_DEVICE

The provisioning mode for fully managed device.

Constant Value: 1 (0x00000001)

PROVISIONING_MODE_MANAGED_PROFILE

public static final int PROVISIONING_MODE_MANAGED_PROFILE

The provisioning mode for managed profile.

Constant Value: 2 (0x00000002)

PROVISIONING_MODE_MANAGED_PROFILE_ON_PERSONAL_DEVICE