FillResponse.Builder

Builder

public Builder ()

addDataset

public FillResponse.Builder addDataset (Dataset dataset)

Adds a new Dataset to this response.

Note: on Android Build.VERSION_CODES.O, the total number of datasets is limited by the Binder transaction size, so it's recommended to keep it small (in the range of 10-20 at most) and use pagination by adding a fake authenticated dataset at the end with a presentation string like "Next 10" that would return a new FillResponse with the next 10 datasets, and so on. This limitation was lifted on Android Build.VERSION_CODES.O_MR1, although the Binder transaction size can still be reached if each dataset itself is too big.

build

public FillResponse build ()

Builds a new FillResponse instance.

disableAutofill

public FillResponse.Builder disableAutofill (long duration)

Disables autofill for the app or activity.

This method is useful to optimize performance in cases where the service knows it can not autofill an app—for example, when the service has a list of "denylisted" apps such as office suites.

By default, it disables autofill for all activities in the app, unless the response is flagged with FillResponse.FLAG_DISABLE_ACTIVITY_ONLY.

Autofill for the app or activity is automatically re-enabled after any of the following conditions:

1. duration milliseconds have passed.
2. The autofill service for the user has changed.
3. The device has rebooted.

Note: Activities that are running when autofill is re-enabled remain disabled for autofill until they finish and restart.

setAuthentication

public FillResponse.Builder setAuthentication (AutofillId[] ids, 
                IntentSender authentication, 
                RemoteViews presentation, 
                InlinePresentation inlinePresentation)

This method was deprecated in API level 33.
Use setAuthentication(android.view.autofill.AutofillId[], android.content.IntentSender, android.service.autofill.Presentations) instead.

Triggers a custom UI before autofilling the screen with any data set in this response.

Note: Although the name of this method suggests that it should be used just for authentication flow, it can be used for other advanced flows; see AutofillService for examples.

This method is similar to setAuthentication(android.view.autofill.AutofillId[], android.content.IntentSender, android.widget.RemoteViews), but also accepts an InlinePresentation presentation which is required for authenticating through the inline autofill flow.

Note: setHeader(android.widget.RemoteViews) or setFooter(android.widget.RemoteViews) does not work with InlinePresentation.

setAuthentication

public FillResponse.Builder setAuthentication (AutofillId[] ids, 
                IntentSender authentication, 
                Presentations presentations)

Triggers a custom UI before autofilling the screen with any data set in this response.

Note: Although the name of this method suggests that it should be used just for authentication flow, it can be used for other advanced flows; see AutofillService for examples.

This is typically useful when a user interaction is required to unlock their data vault if you encrypt the data set labels and data set data. It is recommended to encrypt only the sensitive data and not the data set labels which would allow auth on the data set level leading to a better user experience. Note that if you use sensitive data as a label, for example an email address, then it should also be encrypted. The provided intent must be an Activity which implements your authentication flow. Also if you provide an auth intent you also need to specify the presentation view to be shown in the fill UI for the user to trigger your authentication flow.

When a user triggers autofill, the system launches the provided intent whose extras will have the screen content and your client state. Once you complete your authentication flow you should set the Activity result to Activity.RESULT_OK and set the AutofillManager.EXTRA_AUTHENTICATION_RESULT extra with the fully populated response (or null if the screen cannot be autofilled).

For example, if you provided an empty response because the user's data was locked and marked that the response needs an authentication then in the response returned if authentication succeeds you need to provide all available data sets some of which may need to be further authenticated, for example a credit card whose CVV needs to be entered.

If you provide an authentication intent you must also provide a presentation which is used to visualize the response for triggering the authentication flow.

Note: Do not make the provided pending intent immutable by using PendingIntent.FLAG_IMMUTABLE as the platform needs to fill in the authentication arguments.

Note: setHeader(android.widget.RemoteViews) or setFooter(android.widget.RemoteViews) does not work with InlinePresentation.

setAuthentication

public FillResponse.Builder setAuthentication (AutofillId[] ids, 
                IntentSender authentication, 
                RemoteViews presentation)

Triggers a custom UI before autofilling the screen with any data set in this response.

Note: Although the name of this method suggests that it should be used just for authentication flow, it can be used for other advanced flows; see AutofillService for examples.

This is typically useful when a user interaction is required to unlock their data vault if you encrypt the data set labels and data set data. It is recommended to encrypt only the sensitive data and not the data set labels which would allow auth on the data set level leading to a better user experience. Note that if you use sensitive data as a label, for example an email address, then it should also be encrypted. The provided intent must be an Activity which implements your authentication flow. Also if you provide an auth intent you also need to specify the presentation view to be shown in the fill UI for the user to trigger your authentication flow.

When a user triggers autofill, the system launches the provided intent whose extras will have the screen content and your client state. Once you complete your authentication flow you should set the Activity result to Activity.RESULT_OK and set the AutofillManager.EXTRA_AUTHENTICATION_RESULT extra with the fully populated response (or null if the screen cannot be autofilled).

IMPORTANT: Extras must be non-null on the intent being set for Android 12 otherwise it will cause a crash. Do not use Activity#setResult(int), instead use Activity#setResult(int, Intent)

setAuthentication

public FillResponse.Builder setAuthentication (AutofillId[] ids, 
                IntentSender authentication, 
                RemoteViews presentation, 
                InlinePresentation inlinePresentation, 
                InlinePresentation inlineTooltipPresentation)

This method was deprecated in API level 33.
Use setAuthentication(android.view.autofill.AutofillId[], android.content.IntentSender, android.service.autofill.Presentations) instead.

Triggers a custom UI before autofilling the screen with any data set in this response.

This method like setAuthentication(android.view.autofill.AutofillId[], android.content.IntentSender, android.widget.RemoteViews, android.service.autofill.InlinePresentation) but allows setting an InlinePresentation for the inline suggestion tooltip.

setClientState

public FillResponse.Builder setClientState (Bundle clientState)

Sets a bundle with state that is passed to subsequent APIs that manipulate this response.

You can use this bundle to store intermediate state that is passed to subsequent calls to AutofillService#onFillRequest(FillRequest, android.os.CancellationSignal, FillCallback) and AutofillService#onSaveRequest(SaveRequest, SaveCallback), and you can also retrieve it by calling FillEventHistory.Event#getClientState().

If this method is called on multiple FillResponse objects for the same screen, just the latest bundle is passed back to the service.

setDetectedFieldClassifications

public FillResponse.Builder setDetectedFieldClassifications (Set<FieldClassification> fieldInfos)

Adds a new FieldClassification to this response, to help the platform provide more accurate detection results. Call this when a field has been detected with a type. Altough similiarly named with setFieldClassificationIds(AutofillId), it provides a different functionality - setFieldClassificationIds should be used when a field is only suspected to be Autofillable. This method should be used when a field is certainly Autofillable with a certain type.

setDialogHeader

public FillResponse.Builder setDialogHeader (RemoteViews header)

Sets the presentation of header in fill dialog UI. The header should have a prompt for what datasets are shown in the dialog. If this is not set, the dialog only shows your application icon. More details about the fill dialog, see fill dialog UI

setFieldClassificationIds

public FillResponse.Builder setFieldClassificationIds (AutofillId... ids)

Sets which fields are used for field classification

Note: This method automatically adds the FillResponse#FLAG_TRACK_CONTEXT_COMMITED to the flags.

setFillDialogTriggerIds

public FillResponse.Builder setFillDialogTriggerIds (AutofillId... ids)

Sets which fields are used for the fill dialog UI. More details about the fill dialog, see fill dialog UI

setFlags

public FillResponse.Builder setFlags (int flags)

Sets flags changing the response behavior.

setFooter

public FillResponse.Builder setFooter (RemoteViews footer)

Sets a footer to be shown as the last element in the list of datasets.

When this method is called, you must also add a dataset, otherwise build() throws an IllegalStateException. Similarly, this method should only be used on FillResponses that do not require authentication (as the footer could have been set directly in the main presentation in these cases).

Theme does not work with RemoteViews layout. Avoid hardcoded text color or background color: Autofill on different platforms may have different themes.

setHeader

public FillResponse.Builder setHeader (RemoteViews header)

Sets a header to be shown as the first element in the list of datasets.

When this method is called, you must also add a dataset, otherwise build() throws an IllegalStateException. Similarly, this method should only be used on FillResponses that do not require authentication (as the header could have been set directly in the main presentation in these cases).

Theme does not work with RemoteViews layout. Avoid hardcoded text color or background color: Autofill on different platforms may have different themes.

setIconResourceId

public FillResponse.Builder setIconResourceId (int id)

Overwrites Save/Fill dialog header icon with a specific one specified by resource id. The image is pulled from the package, so id should be defined in the manifest.

setIgnoredIds

public FillResponse.Builder setIgnoredIds (AutofillId... ids)

Specifies views that should not trigger new AutofillService#onFillRequest(FillRequest, android.os.CancellationSignal, FillCallback) requests.

This is typically used when the service cannot autofill the view; for example, a text field representing the result of a Captcha challenge.

setPresentationCancelIds

public FillResponse.Builder setPresentationCancelIds (int[] ids)

Sets target resource IDs of the child view in Presentation Template which will cancel the session when clicked. Those targets will be respectively applied to a child of the header, footer and each Dataset.

setSaveInfo

public FillResponse.Builder setSaveInfo (SaveInfo saveInfo)

Sets the SaveInfo associated with this response.

setServiceDisplayNameResourceId

public FillResponse.Builder setServiceDisplayNameResourceId (int id)

Overrides the service name in the Save Dialog header with a specific string defined in the service provider's manifest.xml

setShowFillDialogIcon

public FillResponse.Builder setShowFillDialogIcon (boolean show)

Whether or not to show the Autofill provider icon inside of the Fill Dialog

setShowSaveDialogIcon

public FillResponse.Builder setShowSaveDialogIcon (boolean show)

Whether or not to show the Autofill provider icon inside of the Save Dialog

setUserData

public FillResponse.Builder setUserData (UserData userData)

Sets a specific UserData for field classification for this request only.

Any fields in this UserData will override corresponding fields in the generic UserData object