CharBuffer

allocate

public static CharBuffer allocate (int capacity)

Allocates a new char buffer.

The new buffer's position will be zero, its limit will be its capacity, its mark will be undefined, each of its elements will be initialized to zero, and its byte order will be the native order of the underlying hardware. It will have a backing array, and its array offset will be zero.

append

public CharBuffer append (char c)

Appends the specified char to this buffer  (optional operation).

An invocation of this method of the form dst.append(c) behaves in exactly the same way as the invocation

     dst.put(c) 

append

public CharBuffer append (CharSequence csq, 
                int start, 
                int end)

Appends a subsequence of the specified character sequence to this buffer  (optional operation).

An invocation of this method of the form dst.append(csq, start, end) when csq is not null, behaves in exactly the same way as the invocation

     dst.put(csq.subSequence(start, end).toString()) 

append

public CharBuffer append (CharSequence csq)

Appends the specified character sequence to this buffer  (optional operation).

An invocation of this method of the form dst.append(csq) behaves in exactly the same way as the invocation

     dst.put(csq.toString()) 

Depending on the specification of toString for the character sequence csq, the entire sequence may not be appended. For instance, invoking the toString method of a character buffer will return a subsequence whose content depends upon the buffer's position and limit.

array

public final char[] array ()

Returns the char array that backs this buffer  (optional operation).

Modifications to this buffer's content will cause the returned array's content to be modified, and vice versa.

Invoke the hasArray method before invoking this method in order to ensure that this buffer has an accessible backing array.

arrayOffset

public final int arrayOffset ()

Returns the offset within this buffer's backing array of the first element of the buffer  (optional operation).

If this buffer is backed by an array then buffer position p corresponds to array index p + arrayOffset().

Invoke the hasArray method before invoking this method in order to ensure that this buffer has an accessible backing array.

asReadOnlyBuffer

public abstract CharBuffer asReadOnlyBuffer ()

Creates a new, read-only char buffer that shares this buffer's content.

The content of the new buffer will be that of this buffer. Changes to this buffer's content will be visible in the new buffer; the new buffer itself, however, will be read-only and will not allow the shared content to be modified. The two buffers' position, limit, and mark values will be independent.

The new buffer's capacity, limit, position, mark values, and byte order will be identical to those of this buffer.

If this buffer is itself read-only then this method behaves in exactly the same way as the duplicate method.

charAt

public final char charAt (int index)

Reads the character at the given index relative to the current position.

chars

public IntStream chars ()

Returns a stream of int zero-extending the char values from this sequence. Any char which maps to a surrogate code point is passed through uninterpreted.

The stream binds to this sequence when the terminal stream operation commences (specifically, for mutable sequences the spliterator for the stream is late-binding). If the sequence is modified during that operation then the result is undefined.

clear

public Buffer clear ()

Clears this buffer. The position is set to zero, the limit is set to the capacity, and the mark is discarded.

Invoke this method before using a sequence of channel-read or put operations to fill this buffer. For example:

 buf.clear();     // Prepare buffer for reading
 in.read(buf);    // Read data

This method does not actually erase the data in the buffer, but it is named as if it did because it will most often be used in situations in which that might as well be the case.

compact

public abstract CharBuffer compact ()

Compacts this buffer  (optional operation).

The chars between the buffer's current position and its limit, if any, are copied to the beginning of the buffer. That is, the char at index p = position() is copied to index zero, the char at index p + 1 is copied to index one, and so forth until the char at index limit() - 1 is copied to index n = limit() - 1 - p. The buffer's position is then set to n+1 and its limit is set to its capacity. The mark, if defined, is discarded.

The buffer's position is set to the number of chars copied, rather than to zero, so that an invocation of this method can be followed immediately by an invocation of another relative put method.

compareTo

public int compareTo (CharBuffer that)

Compares this buffer to another.

Two char buffers are compared by comparing their sequences of remaining elements lexicographically, without regard to the starting position of each sequence within its corresponding buffer. Pairs of char elements are compared as if by invoking Character.compare(char,char).

A char buffer is not comparable to any other type of object.

duplicate

public abstract CharBuffer duplicate ()

Creates a new char buffer that shares this buffer's content.

The content of the new buffer will be that of this buffer. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffers' position, limit, and mark values will be independent.

The new buffer's capacity, limit, position, mark values, and byte order will be identical to those of this buffer. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

equals

public boolean equals (Object ob)

Tells whether or not this buffer is equal to another object.

Two char buffers are equal if, and only if,

1. They have the same element type,

2. They have the same number of remaining elements, and

3. The two sequences of remaining elements, considered independently of their starting positions, are pointwise equal.

A char buffer is not equal to any other type of object.

flip

public Buffer flip ()

Flips this buffer. The limit is set to the current position and then the position is set to zero. If the mark is defined then it is discarded.

After a sequence of channel-read or put operations, invoke this method to prepare for a sequence of channel-write or relative get operations. For example:

 buf.put(magic);    // Prepend header
 in.read(buf);      // Read data into rest of buffer
 buf.flip();        // Flip buffer
 out.write(buf);    // Write header + data to channel

This method is often used in conjunction with the compact method when transferring data from one place to another.

get

public abstract char get ()

Relative get method. Reads the char at this buffer's current position, and then increments the position.

get

public CharBuffer get (int index, 
                char[] dst)

Absolute bulk get method.

This method transfers chars from this buffer into the given destination array. The position of this buffer is unchanged. An invocation of this method of the form src.get(index, dst) behaves in exactly the same way as the invocation:

     src.get(index, dst, 0, dst.length) 

get

public CharBuffer get (char[] dst)

Relative bulk get method.

This method transfers chars from this buffer into the given destination array. An invocation of this method of the form src.get(a) behaves in exactly the same way as the invocation

     src.get(a, 0, a.length) 

get

public CharBuffer get (char[] dst, 
                int offset, 
                int length)

Relative bulk get method.

This method transfers chars from this buffer into the given destination array. If there are fewer chars remaining in the buffer than are required to satisfy the request, that is, if length > remaining(), then no chars are transferred and a BufferUnderflowException is thrown.

Otherwise, this method copies length chars from this buffer into the given array, starting at the current position of this buffer and at the given offset in the array. The position of this buffer is then incremented by length.

In other words, an invocation of this method of the form src.get(dst, off, len) has exactly the same effect as the loop

for (int i = off; i < off + len; i++)
         dst[i] = src.get();
 

get

public CharBuffer get (int index, 
                char[] dst, 
                int offset, 
                int length)

Absolute bulk get method.

This method transfers length chars from this buffer into the given array, starting at the given index in this buffer and at the given offset in the array. The position of this buffer is unchanged.

An invocation of this method of the form src.get(index, dst, offset, length) has exactly the same effect as the following loop except that it first checks the consistency of the supplied parameters and it is potentially much more efficient:

for (int i = offset, j = index; i < offset + length; i++, j++)
         dst[i] = src.get(j);
 

get

public abstract char get (int index)

Absolute get method. Reads the char at the given index.

hasArray

public final boolean hasArray ()

Tells whether or not this buffer is backed by an accessible char array.

If this method returns true then the array and arrayOffset methods may safely be invoked.

hashCode

public int hashCode ()

Returns the current hash code of this buffer.

The hash code of a char buffer depends only upon its remaining elements; that is, upon the elements from position() up to, and including, the element at limit() - 1.

Because buffer hash codes are content-dependent, it is inadvisable to use buffers as keys in hash maps or similar data structures unless it is known that their contents will not change.

isDirect

public abstract boolean isDirect ()

Tells whether or not this char buffer is direct.

isEmpty

public final boolean isEmpty ()

Returns true if this character buffer is empty.

length

public final int length ()

Returns the length of this character buffer.

When viewed as a character sequence, the length of a character buffer is simply the number of characters between the position (inclusive) and the limit (exclusive); that is, it is equivalent to remaining().

limit

public Buffer limit (int newLimit)

Sets this buffer's limit. If the position is larger than the new limit then it is set to the new limit. If the mark is defined and larger than the new limit then it is discarded.

mark

public Buffer mark ()

Sets this buffer's mark at its position.

mismatch

public int mismatch (CharBuffer that)

Finds and returns the relative index of the first mismatch between this buffer and a given buffer. The index is relative to the position of each buffer and will be in the range of 0 (inclusive) up to the smaller of the remaining elements in each buffer (exclusive).

If the two buffers share a common prefix then the returned index is the length of the common prefix and it follows that there is a mismatch between the two buffers at that index within the respective buffers. If one buffer is a proper prefix of the other then the returned index is the smaller of the remaining elements in each buffer, and it follows that the index is only valid for the buffer with the larger number of remaining elements. Otherwise, there is no mismatch.

order

public abstract ByteOrder order ()

Retrieves this buffer's byte order.

The byte order of a char buffer created by allocation or by wrapping an existing char array is the native order of the underlying hardware. The byte order of a char buffer created as a view of a byte buffer is that of the byte buffer at the moment that the view is created.

position

public Buffer position (int newPosition)

Sets this buffer's position. If the mark is defined and larger than the new position then it is discarded.

put

public final CharBuffer put (char[] src)

Relative bulk put method  (optional operation).

This method transfers the entire content of the given source char array into this buffer. An invocation of this method of the form dst.put(a) behaves in exactly the same way as the invocation

     dst.put(a, 0, a.length) 

put

public CharBuffer put (int index, 
                char[] src)

Absolute bulk put method  (optional operation).

This method copies chars into this buffer from the given source array. The position of this buffer is unchanged. An invocation of this method of the form dst.put(index, src) behaves in exactly the same way as the invocation:

     dst.put(index, src, 0, src.length); 

put

public abstract CharBuffer put (int index, 
                char c)

Absolute put method  (optional operation).

Writes the given char into this buffer at the given index.

put

public CharBuffer put (CharBuffer src)

Relative bulk put method  (optional operation).

This method transfers the chars remaining in the given source buffer into this buffer. If there are more chars remaining in the source buffer than in this buffer, that is, if src.remaining() > remaining(), then no chars are transferred and a BufferOverflowException is thrown.

Otherwise, this method copies n = src.remaining() chars from the given buffer into this buffer, starting at each buffer's current position. The positions of both buffers are then incremented by n.

In other words, an invocation of this method of the form dst.put(src) has exactly the same effect as the loop

     while (src.hasRemaining())
         dst.put(src.get()); 

put

public abstract CharBuffer put (char c)

Relative put method  (optional operation).

Writes the given char into this buffer at the current position, and then increments the position.

put

public CharBuffer put (int index, 
                char[] src, 
                int offset, 
                int length)

Absolute bulk put method  (optional operation).

This method transfers length chars from the given array, starting at the given offset in the array and at the given index in this buffer. The position of this buffer is unchanged.

An invocation of this method of the form dst.put(index, src, offset, length) has exactly the same effect as the following loop except that it first checks the consistency of the supplied parameters and it is potentially much more efficient:

for (int i = offset, j = index; i < offset + length; i++, j++)
         dst.put(j, src[i]);
 

put

public CharBuffer put (char[] src, 
                int offset, 
                int length)

Relative bulk put method  (optional operation).

This method transfers chars into this buffer from the given source array. If there are more chars to be copied from the array than remain in this buffer, that is, if length > remaining(), then no chars are transferred and a BufferOverflowException is thrown.

Otherwise, this method copies length chars from the given array into this buffer, starting at the given offset in the array and at the current position of this buffer. The position of this buffer is then incremented by length.

In other words, an invocation of this method of the form dst.put(src, off, len) has exactly the same effect as the loop

for (int i = off; i < off + len; i++)
         dst.put(src[i]);
 

put

public final CharBuffer put (String src)

Relative bulk put method  (optional operation).

This method transfers the entire content of the given source string into this buffer. An invocation of this method of the form dst.put(s) behaves in exactly the same way as the invocation

     dst.put(s, 0, s.length()) 

put

public CharBuffer put (String src, 
                int start, 
                int end)

Relative bulk put method  (optional operation).

This method transfers chars from the given string into this buffer. If there are more chars to be copied from the string than remain in this buffer, that is, if end - start > remaining(), then no chars are transferred and a BufferOverflowException is thrown.

Otherwise, this method copies n = end - start chars from the given string into this buffer, starting at the given start index and at the current position of this buffer. The position of this buffer is then incremented by n.

In other words, an invocation of this method of the form dst.put(src, start, end) has exactly the same effect as the loop

for (int i = start; i < end; i++)
         dst.put(src.charAt(i));
 

put

public CharBuffer put (int index, 
                CharBuffer src, 
                int offset, 
                int length)

Absolute bulk put method  (optional operation).

This method transfers length chars into this buffer from the given source buffer, starting at the given offset in the source buffer and the given index in this buffer. The positions of both buffers are unchanged.

In other words, an invocation of this method of the form dst.put(index, src, offset, length) has exactly the same effect as the loop

for (int i = offset, j = index; i < offset + length; i++, j++)
     dst.put(j, src.get(i));
 

read

public int read (CharBuffer target)

Attempts to read characters into the specified character buffer. The buffer is used as a repository of characters as-is: the only changes made are the results of a put operation. No flipping or rewinding of the buffer is performed.

reset

public Buffer reset ()

Resets this buffer's position to the previously-marked position.

Invoking this method neither changes nor discards the mark's value.

rewind

public Buffer rewind ()

Rewinds this buffer. The position is set to zero and the mark is discarded.

Invoke this method before a sequence of channel-write or get operations, assuming that the limit has already been set appropriately. For example:

 out.write(buf);    // Write remaining data
 buf.rewind();      // Rewind buffer
 buf.get(array);    // Copy data into array

slice

public abstract CharBuffer slice ()

Creates a new char buffer whose content is a shared subsequence of this buffer's content.

The content of the new buffer will start at this buffer's current position. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffers' position, limit, and mark values will be independent.

The new buffer's position will be zero, its capacity and its limit will be the number of chars remaining in this buffer, its mark will be undefined, and its byte order will be identical to that of this buffer. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

slice

public abstract CharBuffer slice (int index, 
                int length)

Creates a new char buffer whose content is a shared subsequence of this buffer's content.

The content of the new buffer will start at position index in this buffer, and will contain length elements. Changes to this buffer's content will be visible in the new buffer, and vice versa; the two buffers' position, limit, and mark values will be independent.

The new buffer's position will be zero, its capacity and its limit will be length, its mark will be undefined, and its byte order will be identical to that of this buffer. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

subSequence

public abstract CharBuffer subSequence (int start, 
                int end)

Creates a new character buffer that represents the specified subsequence of this buffer, relative to the current position.

The new buffer will share this buffer's content; that is, if the content of this buffer is mutable then modifications to one buffer will cause the other to be modified. The new buffer's capacity will be that of this buffer, its position will be position() + start, its limit will be position() + end, and its byte order will be identical to that of this buffer. The new buffer will be direct if, and only if, this buffer is direct, and it will be read-only if, and only if, this buffer is read-only.

toString

public String toString ()

Returns a string containing the characters in this buffer.

The first character of the resulting string will be the character at this buffer's position, while the last character will be the character at index limit() - 1. Invoking this method does not change the buffer's position.

wrap

public static CharBuffer wrap (CharSequence csq)

Wraps a character sequence into a buffer.

The content of the new, read-only buffer will be the content of the given character sequence. The new buffer's capacity and limit will be csq.length(), its position will be zero, and its mark will be undefined.

wrap

public static CharBuffer wrap (char[] array, 
                int offset, 
                int length)

Wraps a char array into a buffer.

The new buffer will be backed by the given char array; that is, modifications to the buffer will cause the array to be modified and vice versa. The new buffer's capacity will be array.length, its position will be offset, its limit will be offset + length, its mark will be undefined, and its byte order will be the native order of the underlying hardware. Its backing array will be the given array, and its array offset will be zero.

wrap

public static CharBuffer wrap (CharSequence csq, 
                int start, 
                int end)

Wraps a character sequence into a buffer.

The content of the new, read-only buffer will be the content of the given character sequence. The buffer's capacity will be csq.length(), its position will be start, its limit will be end, and its mark will be undefined.

wrap

public static CharBuffer wrap (char[] array)

Wraps a char array into a buffer.

The new buffer will be backed by the given char array; that is, modifications to the buffer will cause the array to be modified and vice versa. The new buffer's capacity and limit will be array.length, its position will be zero, its mark will be undefined, and its byte order will be the native order of the underlying hardware. Its backing array will be the given array, and its array offset will be zero.