AssetManager.AssetInputStream


public final class AssetManager.AssetInputStream
extends InputStream

java.lang.Object
   ↳ java.io.InputStream
     ↳ android.content.res.AssetManager.AssetInputStream


Summary

Public methods

int available()

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected.

void close()

Closes this input stream and releases any system resources associated with the stream.

void mark(int readlimit)

Marks the current position in this input stream.

boolean markSupported()

Tests if this input stream supports the mark and reset methods.

int read()

Reads the next byte of data from the input stream.

int read(byte[] b, int off, int len)

Reads up to len bytes of data from the input stream into an array of bytes.

int read(byte[] b)

Reads some number of bytes from the input stream and stores them into the buffer array b.

void reset()

Repositions this stream to the position at the time the mark method was last called on this input stream.

long skip(long n)

Skips over and discards n bytes of data from this input stream.

Protected methods

void finalize()

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.

Inherited methods

Public methods

available

Added in API level 1
public int available ()

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected. The read might be on the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes.

Note that while some implementations of InputStream will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream.

A subclass's implementation of this method may choose to throw an IOException if this input stream has been closed by invoking the close() method.

The available method of InputStream always returns 0.

This method should be overridden by subclasses.

Returns
int an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking or 0 when it reaches the end of the input stream.

Throws
IOException

close

Added in API level 1
public void close ()

Closes this input stream and releases any system resources associated with the stream.

The close method of InputStream does nothing.

Throws
IOException

mark

Added in API level 1
public void mark (int readlimit)

Marks the current position in this input stream. A subsequent call to the reset method repositions this stream at the last marked position so that subsequent reads re-read the same bytes.

The readlimit arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated.

The general contract of mark is that, if the method markSupported returns true, the stream somehow remembers all the bytes read after the call to mark and stands ready to supply those same bytes again if and whenever the method reset is called. However, the stream is not required to remember any data at all if more than readlimit bytes are read from the stream before reset is called.

Marking a closed stream should not have any effect on the stream.

The mark method of InputStream does nothing.

Parameters
readlimit int: the maximum limit of bytes that can be read before the mark position becomes invalid.

markSupported

Added in API level 1
public boolean markSupported ()

Tests if this input stream supports the mark and reset methods. Whether or not mark and reset are supported is an invariant property of a particular input stream instance. The markSupported method of InputStream returns false.

Returns
boolean true if this stream instance supports the mark and reset methods; false otherwise.

read

Added in API level 1
public int read ()

Reads the next byte of data from the input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

A subclass must provide an implementation of this method.

Returns
int the next byte of data, or -1 if the end of the stream is reached.

Throws
IOException

read

Added in API level 1
public int read (byte[] b, 
                int off, 
                int len)

Reads up to len bytes of data from the input stream into an array of bytes. An attempt is made to read as many as len bytes, but a smaller number may be read. The number of bytes actually read is returned as an integer.

This method blocks until input data is available, end of file is detected, or an exception is thrown.

If len is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[off], the next one into b[off+1], and so on. The number of bytes read is, at most, equal to len. Let k be the number of bytes actually read; these bytes will be stored in elements b[off] through b[off+k-1], leaving elements b[off+k] through b[off+len-1] unaffected.

In every case, elements b[0] through b[off-1] and elements b[off+len] through b[b.length-1] are unaffected.

The read(b, off, len) method for class InputStream simply calls the method read() repeatedly. If the first such call results in an IOException, that exception is returned from the call to the read(b, off, len) method. If any subsequent call to read() results in a IOException, the exception is caught and treated as if it were end of file; the bytes read up to that point are stored into b and the number of bytes read before the exception occurred is returned. The default implementation of this method blocks until the requested amount of input data len has been read, end of file is detected, or an exception is thrown. Subclasses are encouraged to provide a more efficient implementation of this method.

Parameters
b byte: This value cannot be null.

off int: the start offset in array b at which the data is written.

len int: the maximum number of bytes to read.

Returns
int the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.

Throws
IOException

read

Added in API level 1
public int read (byte[] b)

Reads some number of bytes from the input stream and stores them into the buffer array b. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown.

If the length of b is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at the end of the file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[0], the next one into b[1], and so on. The number of bytes read is, at most, equal to the length of b. Let k be the number of bytes actually read; these bytes will be stored in elements b[0] through b[k-1], leaving elements b[k] through b[b.length-1] unaffected.

The read(b) method for class InputStream has the same effect as:

read(b, 0, b.length) 

Parameters
b byte: This value cannot be null.

Returns
int the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.

Throws
IOException

reset

Added in API level 1
public void reset ()

Repositions this stream to the position at the time the mark method was last called on this input stream.

The general contract of reset is:

  • If the method markSupported returns true, then:
    • If the method mark has not been called since the stream was created, or the number of bytes read from the stream since mark was last called is larger than the argument to mark at that last call, then an IOException might be thrown.
    • If such an IOException is not thrown, then the stream is reset to a state such that all the bytes read since the most recent call to mark (or since the start of the file, if mark has not been called) will be resupplied to subsequent callers of the read method, followed by any bytes that otherwise would have been the next input data as of the time of the call to reset.
  • If the method markSupported returns false, then:
    • The call to reset may throw an IOException.
    • If an IOException is not thrown, then the stream is reset to a fixed state that depends on the particular type of the input stream and how it was created. The bytes that will be supplied to subsequent callers of the read method depend on the particular type of the input stream.

The method reset for class InputStream does nothing except throw an IOException.

Throws
IOException

skip

Added in API level 1
public long skip (long n)

Skips over and discards n bytes of data from this input stream. The skip method may, for a variety of reasons, end up skipping over some smaller number of bytes, possibly 0. This may result from any of a number of conditions; reaching end of file before n bytes have been skipped is only one possibility. The actual number of bytes skipped is returned. If n is negative, the skip method for class InputStream always returns 0, and no bytes are skipped. Subclasses may handle the negative value differently.

The skip method implementation of this class creates a byte array and then repeatedly reads into it until n bytes have been read or the end of the stream has been reached. Subclasses are encouraged to provide a more efficient implementation of this method. For instance, the implementation may depend on the ability to seek.

Parameters
n long: the number of bytes to be skipped.

Returns
long the actual number of bytes skipped which might be zero.

Throws
IOException

Protected methods

finalize

Added in API level 1
protected void finalize ()

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object. A subclass overrides the finalize method to dispose of system resources or to perform other cleanup.

The general contract of finalize is that it is invoked if and when the Java virtual machine has determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, except as a result of an action taken by the finalization of some other object or class which is ready to be finalized. The finalize method may take any action, including making this object available again to other threads; the usual purpose of finalize, however, is to perform cleanup actions before the object is irrevocably discarded. For example, the finalize method for an object that represents an input/output connection might perform explicit I/O transactions to break the connection before the object is permanently discarded.

The finalize method of class Object performs no special action; it simply returns normally. Subclasses of Object may override this definition.

The Java programming language does not guarantee which thread will invoke the finalize method for any given object. It is guaranteed, however, that the thread that invokes finalize will not be holding any user-visible synchronization locks when finalize is invoked. If an uncaught exception is thrown by the finalize method, the exception is ignored and finalization of that object terminates.

After the finalize method has been invoked for an object, no further action is taken until the Java virtual machine has again determined that there is no longer any means by which this object can be accessed by any thread that has not yet died, including possible actions by other objects or classes which are ready to be finalized, at which point the object may be discarded.

The finalize method is never invoked more than once by a Java virtual machine for any given object.

Any exception thrown by the finalize method causes the finalization of this object to be halted, but is otherwise ignored.

Throws
Throwable