Added in API level 1

AlarmManager


open class AlarmManager
kotlin.Any
   ↳ android.app.AlarmManager

This class provides access to the system alarm services. These allow you to schedule your application to be run at some point in the future. When an alarm goes off, the Intent that had been registered for it is broadcast by the system, automatically starting the target application if it is not already running. Registered alarms are retained while the device is asleep (and can optionally wake the device up if they go off during that time), but will be cleared if it is turned off and rebooted.

The Alarm Manager holds a CPU wake lock as long as the alarm receiver's onReceive() method is executing. This guarantees that the phone will not sleep until you have finished handling the broadcast. Once onReceive() returns, the Alarm Manager releases this wake lock. This means that the phone will in some cases sleep as soon as your onReceive() method completes. If your alarm receiver called Context.startService(), it is possible that the phone will sleep before the requested service is launched. To prevent this, your BroadcastReceiver and Service will need to implement a separate wake lock policy to ensure that the phone continues running until the service becomes available.

Note: The Alarm Manager is intended for cases where you want to have your application code run at a specific time, even if your application is not currently running. For normal timing operations (ticks, timeouts, etc) it is easier and much more efficient to use android.os.Handler.

Note: Beginning with API 19 (android.os.Build.VERSION_CODES#KITKAT) alarm delivery is inexact: the OS will shift alarms in order to minimize wakeups and battery use. There are new APIs to support applications which need strict delivery guarantees; see setWindow(int,long,long,android.app.PendingIntent) and setExact(int,long,android.app.PendingIntent). Applications whose targetSdkVersion is earlier than API 19 will continue to see the previous behavior in which all alarms are delivered exactly when requested.

Summary

Nested classes

An immutable description of a scheduled "alarm clock" event.

abstract

Direct-notification alarms: the requester must be running continuously from the time the alarm is set to the time it is delivered, or delivery will fail.

Constants
static String

Broadcast Action: Sent after the value returned by getNextAlarmClock() has changed.

static String

Broadcast Action: An app is granted the android.Manifest.permission#SCHEDULE_EXACT_ALARM permission.

static Int

Alarm time in SystemClock.elapsedRealtime() (time since boot, including sleep).

static Int

Alarm time in SystemClock.elapsedRealtime() (time since boot, including sleep), which will wake up the device when it goes off.

static Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

static Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

static Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

static Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

static Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

static Int

Alarm time in System.currentTimeMillis() (wall clock time in UTC).

static Int

Alarm time in System.currentTimeMillis() (wall clock time in UTC), which will wake up the device when it goes off.

Public methods
open Boolean

Called to check if the caller can schedule exact alarms.

open Unit
cancel(operation: PendingIntent)

Remove any alarms with a matching Intent.

open Unit

Remove any alarm scheduled to be delivered to the given OnAlarmListener.

open Unit

Remove all alarms previously set by the caller, if any.

open AlarmManager.AlarmClockInfo!

Gets information about the next alarm clock currently scheduled.

open Unit
set(type: Int, triggerAtMillis: Long, operation: PendingIntent)

Schedule an alarm.

open Unit
set(type: Int, triggerAtMillis: Long, tag: String?, listener: AlarmManager.OnAlarmListener, targetHandler: Handler?)

Direct callback version of set(int,long,android.app.PendingIntent).

open Unit

Schedule an alarm that represents an alarm clock, which will be used to notify the user when it goes off.

open Unit
setAndAllowWhileIdle(type: Int, triggerAtMillis: Long, operation: PendingIntent)

Like set(int,long,android.app.PendingIntent), but this alarm will be allowed to execute even when the system is in low-power idle (a.k.a. doze) modes.

open Unit
setExact(type: Int, triggerAtMillis: Long, operation: PendingIntent)

Schedule an alarm to be delivered precisely at the stated time.

open Unit
setExact(type: Int, triggerAtMillis: Long, tag: String?, listener: AlarmManager.OnAlarmListener, targetHandler: Handler?)

Direct callback version of setExact(int,long,android.app.PendingIntent).

open Unit
setExactAndAllowWhileIdle(type: Int, triggerAtMillis: Long, operation: PendingIntent)

Like setExact(int,long,android.app.PendingIntent), but this alarm will be allowed to execute even when the system is in low-power idle modes.

open Unit
setInexactRepeating(type: Int, triggerAtMillis: Long, intervalMillis: Long, operation: PendingIntent)

Schedule a repeating alarm that has inexact trigger time requirements; for example, an alarm that repeats every hour, but not necessarily at the top of every hour.

open Unit
setRepeating(type: Int, triggerAtMillis: Long, intervalMillis: Long, operation: PendingIntent)

Schedule a repeating alarm.

open Unit
setTime(millis: Long)

Set the system wall clock time.

open Unit
setTimeZone(timeZone: String!)

Sets the system's persistent default time zone.

open Unit
setWindow(type: Int, windowStartMillis: Long, windowLengthMillis: Long, operation: PendingIntent)

Schedule an alarm to be delivered within a given window of time.

open Unit
setWindow(type: Int, windowStartMillis: Long, windowLengthMillis: Long, tag: String?, listener: AlarmManager.OnAlarmListener, targetHandler: Handler?)

Direct callback version of setWindow(int,long,long,android.app.PendingIntent).

open Unit
setWindow(type: Int, windowStartMillis: Long, windowLengthMillis: Long, tag: String?, executor: Executor, listener: AlarmManager.OnAlarmListener)

Direct callback version of setWindow(int,long,long,android.app.PendingIntent).

Constants

ACTION_NEXT_ALARM_CLOCK_CHANGED

Added in API level 21
static val ACTION_NEXT_ALARM_CLOCK_CHANGED: String

Broadcast Action: Sent after the value returned by getNextAlarmClock() has changed.

This is a protected intent that can only be sent by the system. It is only sent to registered receivers.

Value: "android.app.action.NEXT_ALARM_CLOCK_CHANGED"

ACTION_SCHEDULE_EXACT_ALARM_PERMISSION_STATE_CHANGED

Added in API level 31
static val ACTION_SCHEDULE_EXACT_ALARM_PERMISSION_STATE_CHANGED: String

Broadcast Action: An app is granted the android.Manifest.permission#SCHEDULE_EXACT_ALARM permission.

When the user revokes the android.Manifest.permission#SCHEDULE_EXACT_ALARM permission, all alarms scheduled with #setExact, setExactAndAllowWhileIdle and setAlarmClock(android.app.AlarmManager.AlarmClockInfo,android.app.PendingIntent) will be deleted.

When the user grants the android.Manifest.permission#SCHEDULE_EXACT_ALARM, this broadcast will be sent. Applications can reschedule all the necessary alarms when receiving it.

This broadcast will not be sent when the user revokes the permission.

Note: Applications are still required to check canScheduleExactAlarms() before using the above APIs after receiving this broadcast, because it's possible that the permission is already revoked again by the time applications receive this broadcast.

This broadcast will be sent to both runtime receivers and manifest receivers.

This broadcast is sent as a foreground broadcast. See android.content.Intent#FLAG_RECEIVER_FOREGROUND.

When an application receives this broadcast, it's allowed to start a foreground service.

Value: "android.app.action.SCHEDULE_EXACT_ALARM_PERMISSION_STATE_CHANGED"

ELAPSED_REALTIME

Added in API level 1
static val ELAPSED_REALTIME: Int

Alarm time in SystemClock.elapsedRealtime() (time since boot, including sleep). This alarm does not wake the device up; if it goes off while the device is asleep, it will not be delivered until the next time the device wakes up.

Value: 3

ELAPSED_REALTIME_WAKEUP

Added in API level 1
static val ELAPSED_REALTIME_WAKEUP: Int

Alarm time in SystemClock.elapsedRealtime() (time since boot, including sleep), which will wake up the device when it goes off.

Value: 2

INTERVAL_DAY

Added in API level 3
static val INTERVAL_DAY: Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

Value: 86400000L

INTERVAL_FIFTEEN_MINUTES

Added in API level 3
static val INTERVAL_FIFTEEN_MINUTES: Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

Value: 900000L

INTERVAL_HALF_DAY

Added in API level 3
static val INTERVAL_HALF_DAY: Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

Value: 43200000L

INTERVAL_HALF_HOUR

Added in API level 3
static val INTERVAL_HALF_HOUR: Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

Value: 1800000L

INTERVAL_HOUR

Added in API level 3
static val INTERVAL_HOUR: Long

Available inexact recurrence interval recognized by setInexactRepeating(int,long,long,android.app.PendingIntent) when running on Android prior to API 19.

Value: 3600000L

RTC

Added in API level 1
static val RTC: Int

Alarm time in System.currentTimeMillis() (wall clock time in UTC). This alarm does not wake the device up; if it goes off while the device is asleep, it will not be delivered until the next time the device wakes up.

Value: 1

RTC_WAKEUP

Added in API level 1
static val RTC_WAKEUP: Int

Alarm time in System.currentTimeMillis() (wall clock time in UTC), which will wake up the device when it goes off.

Value: 0

Public methods

canScheduleExactAlarms

Added in API level 31
open fun canScheduleExactAlarms(): Boolean

Called to check if the caller can schedule exact alarms. Your app schedules exact alarms when it calls any of the setExact... or setAlarmClock API methods.

Apps targeting Build.VERSION_CODES#S or higher can schedule exact alarms only if they have the Manifest.permission#SCHEDULE_EXACT_ALARM permission or they are on the device's power-save exemption list. These apps can also start android.provider.Settings#ACTION_REQUEST_SCHEDULE_EXACT_ALARM to request this permission from the user.

Apps targeting lower sdk versions, can always schedule exact alarms.

Return
Boolean true if the caller can schedule exact alarms, false otherwise.

cancel

Added in API level 1
open fun cancel(operation: PendingIntent): Unit

Remove any alarms with a matching Intent. Any alarm, of any type, whose Intent matches this one (as defined by Intent#filterEquals), will be canceled.

Parameters
operation PendingIntent: IntentSender which matches a previously added IntentSender. This parameter must not be null.

See Also

    cancel

    Added in API level 24
    open fun cancel(listener: AlarmManager.OnAlarmListener): Unit

    Remove any alarm scheduled to be delivered to the given OnAlarmListener.

    Parameters
    listener AlarmManager.OnAlarmListener: OnAlarmListener instance that is the target of a currently-set alarm. This value cannot be null.

    cancelAll

    Added in API level 34
    open fun cancelAll(): Unit

    Remove all alarms previously set by the caller, if any.

    getNextAlarmClock

    Added in API level 21
    open fun getNextAlarmClock(): AlarmManager.AlarmClockInfo!

    Gets information about the next alarm clock currently scheduled. The alarm clocks considered are those scheduled by any application using the setAlarmClock method.

    Return
    AlarmManager.AlarmClockInfo! An AlarmClockInfo object describing the next upcoming alarm clock event that will occur. If there are no alarm clock events currently scheduled, this method will return null.

    set

    Added in API level 1
    open fun set(
        type: Int,
        triggerAtMillis: Long,
        operation: PendingIntent
    ): Unit

    Schedule an alarm. Note: for timing operations (ticks, timeouts, etc) it is easier and much more efficient to use android.os.Handler. If there is already an alarm scheduled for the same IntentSender, that previous alarm will first be canceled.

    If the stated trigger time is in the past, the alarm will be triggered immediately. If there is already an alarm for this Intent scheduled (with the equality of two intents being defined by Intent#filterEquals), then it will be removed and replaced by this one.

    The alarm is an Intent broadcast that goes to a broadcast receiver that you registered with android.content.Context#registerReceiver or through the <receiver> tag in an AndroidManifest.xml file.

    Alarm intents are delivered with a data extra of type int called Intent.EXTRA_ALARM_COUNT that indicates how many past alarm events have been accumulated into this intent broadcast. Recurring alarms that have gone undelivered because the phone was asleep may have a count greater than one when delivered.

    Parameters
    type Int: type of alarm. Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    triggerAtMillis Long: time in milliseconds that the alarm should go off, using the appropriate clock (depending on the alarm type).
    operation PendingIntent: Action to perform when the alarm goes off; typically comes from IntentSender.getBroadcast(). This value cannot be null.

    set

    Added in API level 24
    open fun set(
        type: Int,
        triggerAtMillis: Long,
        tag: String?,
        listener: AlarmManager.OnAlarmListener,
        targetHandler: Handler?
    ): Unit

    Direct callback version of set(int,long,android.app.PendingIntent). Rather than supplying a PendingIntent to be sent when the alarm time is reached, this variant supplies an OnAlarmListener instance that will be invoked at that time.

    The OnAlarmListener's onAlarm() method will be invoked via the specified target Handler, or on the application's main looper if null is passed as the targetHandler parameter.

    Parameters
    type Int: type of alarm. Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    triggerAtMillis Long: time in milliseconds that the alarm should go off, using the appropriate clock (depending on the alarm type).
    tag String?: string describing the alarm, used for logging and battery-use attribution This value may be null.
    listener AlarmManager.OnAlarmListener: OnAlarmListener instance whose onAlarm() method will be called when the alarm time is reached. A given OnAlarmListener instance can only be the target of a single pending alarm, just as a given PendingIntent can only be used with one alarm at a time. This value cannot be null.
    targetHandler Handler?: Handler on which to execute the listener's onAlarm() callback, or null to run that callback on the main looper.

    setAlarmClock

    Added in API level 21
    open fun setAlarmClock(
        info: AlarmManager.AlarmClockInfo,
        operation: PendingIntent
    ): Unit

    Schedule an alarm that represents an alarm clock, which will be used to notify the user when it goes off. The expectation is that when this alarm triggers, the application will further wake up the device to tell the user about the alarm -- turning on the screen, playing a sound, vibrating, etc. As such, the system will typically also use the information supplied here to tell the user about this upcoming alarm if appropriate.

    Due to the nature of this kind of alarm, similar to setExactAndAllowWhileIdle, these alarms will be allowed to trigger even if the system is in a low-power idle (a.k.a. doze) mode. The system may also do some prep-work when it sees that such an alarm coming up, to reduce the amount of background work that could happen if this causes the device to fully wake up -- this is to avoid situations such as a large number of devices having an alarm set at the same time in the morning, all waking up at that time and suddenly swamping the network with pending background work. As such, these types of alarms can be extremely expensive on battery use and should only be used for their intended purpose.

    This method is like setExact(int,long,android.app.PendingIntent), but implies RTC_WAKEUP.

    Note: Starting with Build.VERSION_CODES#S, apps targeting SDK level 31 or higher need to request the SCHEDULE_EXACT_ALARM permission to use this API. The user and the system can revoke this permission via the special app access screen in Settings.

    Note: Exact alarms should only be used for user-facing features. For more details, see Exact alarm permission.

    Alarms scheduled via this API will be allowed to start a foreground service even if the app is in the background.
    Requires android.Manifest.permission#SCHEDULE_EXACT_ALARM

    Parameters
    info AlarmManager.AlarmClockInfo: This value cannot be null.
    operation PendingIntent: Action to perform when the alarm goes off; typically comes from IntentSender.getBroadcast(). This value cannot be null.

    setAndAllowWhileIdle

    Added in API level 23
    open fun setAndAllowWhileIdle(
        type: Int,
        triggerAtMillis: Long,
        operation: PendingIntent
    ): Unit

    Like set(int,long,android.app.PendingIntent), but this alarm will be allowed to execute even when the system is in low-power idle (a.k.a. doze) modes. This type of alarm must only be used for situations where it is actually required that the alarm go off while in idle -- a reasonable example would be for a calendar notification that should make a sound so the user is aware of it. When the alarm is dispatched, the app will also be added to the system's temporary power exemption list for approximately 10 seconds to allow that application to acquire further wake locks in which to complete its work.

    These alarms can significantly impact the power use of the device when idle (and thus cause significant battery blame to the app scheduling them), so they should be used with care. To reduce abuse, there are restrictions on how frequently these alarms will go off for a particular application. Under normal system operation, it will not dispatch these alarms more than about every minute (at which point every such pending alarm is dispatched); when in low-power idle modes this duration may be significantly longer, such as 15 minutes.

    Unlike other alarms, the system is free to reschedule this type of alarm to happen out of order with any other alarms, even those from the same app. This will clearly happen when the device is idle (since this alarm can go off while idle, when any other alarms from the app will be held until later), but may also happen even when not idle.

    Regardless of the app's target SDK version, this call always allows batching of the alarm.

    Parameters
    type Int: type of alarm. Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    triggerAtMillis Long: time in milliseconds that the alarm should go off, using the appropriate clock (depending on the alarm type).
    operation PendingIntent: Action to perform when the alarm goes off; typically comes from IntentSender.getBroadcast(). This value cannot be null.

    setExact

    Added in API level 19
    open fun setExact(
        type: Int,
        triggerAtMillis: Long,
        operation: PendingIntent
    ): Unit

    Schedule an alarm to be delivered precisely at the stated time.

    This method is like set(int,long,android.app.PendingIntent), but does not permit the OS to adjust the delivery time. The alarm will be delivered as nearly as possible to the requested trigger time.

    Note: only alarms for which there is a strong demand for exact-time delivery (such as an alarm clock ringing at the requested time) should be scheduled as exact. Applications are strongly discouraged from using exact alarms unnecessarily as they reduce the OS's ability to minimize battery use.

    Note: Starting with Build.VERSION_CODES#S, apps targeting SDK level 31 or higher need to request the SCHEDULE_EXACT_ALARM permission to use this API, unless the app is exempt from battery restrictions. The user and the system can revoke this permission via the special app access screen in Settings.

    Note: Exact alarms should only be used for user-facing features. For more details, see Exact alarm permission.

    Parameters
    type Int: type of alarm. Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    triggerAtMillis Long: time in milliseconds that the alarm should go off, using the appropriate clock (depending on the alarm type).
    operation PendingIntent: Action to perform when the alarm goes off; typically comes from IntentSender.getBroadcast(). This value cannot be null.

    setExact

    Added in API level 24
    open fun setExact(
        type: Int,
        triggerAtMillis: Long,
        tag: String?,
        listener: AlarmManager.OnAlarmListener,
        targetHandler: Handler?
    ): Unit

    Direct callback version of setExact(int,long,android.app.PendingIntent). Rather than supplying a PendingIntent to be sent when the alarm time is reached, this variant supplies an OnAlarmListener instance that will be invoked at that time.

    The OnAlarmListener's onAlarm() method will be invoked via the specified target Handler, or on the application's main looper if null is passed as the targetHandler parameter.

    This API should only be used to set alarms that are relevant in the context of the app's current lifecycle, as the OnAlarmListener instance supplied is only valid as long as the process is alive, and the system can clean up the app process as soon as it is out of lifecycle. To schedule alarms that fire reliably even after the current lifecycle completes, and wakes up the app if required, use any of the other scheduling APIs that accept a PendingIntent instance.

    On previous android versions Build.VERSION_CODES#S and Build.VERSION_CODES#TIRAMISU, apps targeting SDK level 31 or higher needed to hold the SCHEDULE_EXACT_ALARM permission to use this API, unless the app was exempt from battery restrictions.

    Note: Starting with android version Build.VERSION_CODES#UPSIDE_DOWN_CAKE, the system will explicitly drop any alarms set via this API when the calling app goes out of lifecycle.

    Parameters
    type Int: Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    tag String?: This value may be null.
    listener AlarmManager.OnAlarmListener: This value cannot be null.
    targetHandler Handler?: This value may be null.

    setExactAndAllowWhileIdle

    Added in API level 23
    open fun setExactAndAllowWhileIdle(
        type: Int,
        triggerAtMillis: Long,
        operation: PendingIntent
    ): Unit

    Like setExact(int,long,android.app.PendingIntent), but this alarm will be allowed to execute even when the system is in low-power idle modes. If you don't need exact scheduling of the alarm but still need to execute while idle, consider using setAndAllowWhileIdle. This type of alarm must only be used for situations where it is actually required that the alarm go off while in idle -- a reasonable example would be for a calendar notification that should make a sound so the user is aware of it. When the alarm is dispatched, the app will also be added to the system's temporary power exemption list for approximately 10 seconds to allow that application to acquire further wake locks in which to complete its work.

    These alarms can significantly impact the power use of the device when idle (and thus cause significant battery blame to the app scheduling them), so they should be used with care. To reduce abuse, there are restrictions on how frequently these alarms will go off for a particular application. Under normal system operation, it will not dispatch these alarms more than about every minute (at which point every such pending alarm is dispatched); when in low-power idle modes this duration may be significantly longer, such as 15 minutes.

    Unlike other alarms, the system is free to reschedule this type of alarm to happen out of order with any other alarms, even those from the same app. This will clearly happen when the device is idle (since this alarm can go off while idle, when any other alarms from the app will be held until later), but may also happen even when not idle. Note that the OS will allow itself more flexibility for scheduling these alarms than regular exact alarms, since the application has opted into this behavior. When the device is idle it may take even more liberties with scheduling in order to optimize for battery life.

    Note: Starting with Build.VERSION_CODES#S, apps targeting SDK level 31 or higher need to request the SCHEDULE_EXACT_ALARM permission to use this API, unless the app is exempt from battery restrictions. The user and the system can revoke this permission via the special app access screen in Settings.

    Note: Exact alarms should only be used for user-facing features. For more details, see Exact alarm permission.

    Alarms scheduled via this API will be allowed to start a foreground service even if the app is in the background.

    Parameters
    type Int: type of alarm. Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    triggerAtMillis Long: time in milliseconds that the alarm should go off, using the appropriate clock (depending on the alarm type).
    operation PendingIntent: Action to perform when the alarm goes off; typically comes from IntentSender.getBroadcast(). This value cannot be null.

    setInexactRepeating

    Added in API level 3
    open fun setInexactRepeating(
        type: Int,
        triggerAtMillis: Long,
        intervalMillis: Long,
        operation: PendingIntent
    ): Unit

    Schedule a repeating alarm that has inexact trigger time requirements; for example, an alarm that repeats every hour, but not necessarily at the top of every hour. These alarms are more power-efficient than the strict recurrences traditionally supplied by setRepeating, since the system can adjust alarms' delivery times to cause them to fire simultaneously, avoiding waking the device from sleep more than necessary.

    Your alarm's first trigger will not be before the requested time, but it might not occur for almost a full interval after that time. In addition, while the overall period of the repeating alarm will be as requested, the time between any two successive firings of the alarm may vary. If your application demands very low jitter, use one-shot alarms with an appropriate window instead; see setWindow(int,long,long,android.app.PendingIntent) and setExact(int,long,android.app.PendingIntent).

    As of API 19, all repeating alarms are inexact. Because this method has been available since API 3, your application can safely call it and be assured that it will get similar behavior on both current and older versions of Android.

    Apps targeting Build.VERSION_CODES#S will need to set the flag PendingIntent#FLAG_MUTABLE on the PendingIntent being used to set this alarm, if they want the alarm count to be supplied with the key Intent#EXTRA_ALARM_COUNT.

    Parameters
    type Int: type of alarm. Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    triggerAtMillis Long: time in milliseconds that the alarm should first go off, using the appropriate clock (depending on the alarm type). This is inexact: the alarm will not fire before this time, but there may be a delay of almost an entire alarm interval before the first invocation of the alarm.
    intervalMillis Long: interval in milliseconds between subsequent repeats of the alarm. Prior to API 19, if this is one of INTERVAL_FIFTEEN_MINUTES, INTERVAL_HALF_HOUR, INTERVAL_HOUR, INTERVAL_HALF_DAY, or INTERVAL_DAY then the alarm will be phase-aligned with other alarms to reduce the number of wakeups. Otherwise, the alarm will be set as though the application had called setRepeating. As of API 19, all repeating alarms will be inexact and subject to batching with other alarms regardless of their stated repeat interval.
    operation PendingIntent: Action to perform when the alarm goes off; typically comes from IntentSender.getBroadcast(). This value cannot be null.

    setRepeating

    Added in API level 1
    open fun setRepeating(
        type: Int,
        triggerAtMillis: Long,
        intervalMillis: Long,
        operation: PendingIntent
    ): Unit

    Schedule a repeating alarm. Note: for timing operations (ticks, timeouts, etc) it is easier and much more efficient to use android.os.Handler. If there is already an alarm scheduled for the same IntentSender, it will first be canceled.

    Like #set, except you can also supply a period at which the alarm will automatically repeat. This alarm continues repeating until explicitly removed with #cancel. If the stated trigger time is in the past, the alarm will be triggered immediately, with an alarm count depending on how far in the past the trigger time is relative to the repeat interval.

    If an alarm is delayed (by system sleep, for example, for non _WAKEUP alarm types), a skipped repeat will be delivered as soon as possible. After that, future alarms will be delivered according to the original schedule; they do not drift over time. For example, if you have set a recurring alarm for the top of every hour but the phone was asleep from 7:45 until 8:45, an alarm will be sent as soon as the phone awakens, then the next alarm will be sent at 9:00.

    If your application wants to allow the delivery times to drift in order to guarantee that at least a certain time interval always elapses between alarms, then the approach to take is to use one-time alarms, scheduling the next one yourself when handling each alarm delivery.

    Note: as of API 19, all repeating alarms are inexact. If your application needs precise delivery times then it must use one-time exact alarms, rescheduling each time as described above. Legacy applications whose targetSdkVersion is earlier than API 19 will continue to have all of their alarms, including repeating alarms, treated as exact.

    Apps targeting Build.VERSION_CODES#S will need to set the flag PendingIntent#FLAG_MUTABLE on the PendingIntent being used to set this alarm, if they want the alarm count to be supplied with the key Intent#EXTRA_ALARM_COUNT.

    Parameters
    type Int: type of alarm. Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    triggerAtMillis Long: time in milliseconds that the alarm should first go off, using the appropriate clock (depending on the alarm type).
    intervalMillis Long: interval in milliseconds between subsequent repeats of the alarm.
    operation PendingIntent: Action to perform when the alarm goes off; typically comes from IntentSender.getBroadcast(). This value cannot be null.

    setTime

    Added in API level 8
    open fun setTime(millis: Long): Unit

    Set the system wall clock time. Requires the permission android.permission.SET_TIME.
    Requires android.Manifest.permission#SET_TIME

    Parameters
    millis Long: time in milliseconds since the Epoch

    setTimeZone

    Added in API level 1
    open fun setTimeZone(timeZone: String!): Unit

    Sets the system's persistent default time zone. This is the time zone for all apps, even after a reboot. Use java.util.TimeZone#setDefault if you just want to change the time zone within your app, and even then prefer to pass an explicit java.util.TimeZone to APIs that require it rather than changing the time zone for all threads.

    On android M and above, it is an error to pass in a non-Olson timezone to this function. Note that this is a bad idea on all Android releases because POSIX and the TimeZone class have opposite interpretations of '+' and '-' in the same non-Olson ID.
    Requires android.Manifest.permission#SET_TIME_ZONE

    Parameters
    timeZone String!: one of the Olson ids from the list returned by java.util.TimeZone#getAvailableIDs

    setWindow

    Added in API level 19
    open fun setWindow(
        type: Int,
        windowStartMillis: Long,
        windowLengthMillis: Long,
        operation: PendingIntent
    ): Unit

    Schedule an alarm to be delivered within a given window of time. This method is similar to set(int,long,android.app.PendingIntent), but allows the application to precisely control the degree to which its delivery might be adjusted by the OS. This method allows an application to take advantage of the battery optimizations that arise from delivery batching even when it has modest timeliness requirements for its alarms.

    Note: Starting with API Build.VERSION_CODES#S, apps should not pass in a window of less than 10 minutes. The system will try its best to accommodate smaller windows if the alarm is supposed to fire in the near future, but there are no guarantees and the app should expect any window smaller than 10 minutes to get elongated to 10 minutes.

    This method can also be used to achieve strict ordering guarantees among multiple alarms by ensuring that the windows requested for each alarm do not intersect.

    When precise delivery is not required, applications should use the standard set(int,long,android.app.PendingIntent) method. This will give the OS the most flexibility to minimize wakeups and battery use. For alarms that must be delivered at precisely-specified times with no acceptable variation, applications can use setExact(int,long,android.app.PendingIntent).

    Parameters
    type Int: type of alarm. Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    windowStartMillis Long: The earliest time, in milliseconds, that the alarm should be delivered, expressed in the appropriate clock's units (depending on the alarm type).
    windowLengthMillis Long: The length of the requested delivery window, in milliseconds. The alarm will be delivered no later than this many milliseconds after windowStartMillis. Note that this parameter is a duration, not the timestamp of the end of the window.
    operation PendingIntent: Action to perform when the alarm goes off; typically comes from IntentSender.getBroadcast(). This value cannot be null.

    setWindow

    Added in API level 24
    open fun setWindow(
        type: Int,
        windowStartMillis: Long,
        windowLengthMillis: Long,
        tag: String?,
        listener: AlarmManager.OnAlarmListener,
        targetHandler: Handler?
    ): Unit

    Direct callback version of setWindow(int,long,long,android.app.PendingIntent). Rather than supplying a PendingIntent to be sent when the alarm time is reached, this variant supplies an OnAlarmListener instance that will be invoked at that time.

    The OnAlarmListener onAlarm() method will be invoked via the specified target Handler, or on the application's main looper if null is passed as the targetHandler parameter.

    Note: Starting with API Build.VERSION_CODES#S, apps should not pass in a window of less than 10 minutes. The system will try its best to accommodate smaller windows if the alarm is supposed to fire in the near future, but there are no guarantees and the app should expect any window smaller than 10 minutes to get elongated to 10 minutes.

    Parameters
    type Int: Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    tag String?: This value may be null.
    listener AlarmManager.OnAlarmListener: This value cannot be null.
    targetHandler Handler?: This value may be null.

    setWindow

    Added in API level 34
    open fun setWindow(
        type: Int,
        windowStartMillis: Long,
        windowLengthMillis: Long,
        tag: String?,
        executor: Executor,
        listener: AlarmManager.OnAlarmListener
    ): Unit

    Direct callback version of setWindow(int,long,long,android.app.PendingIntent). Rather than supplying a PendingIntent to be sent when the alarm time is reached, this variant supplies an OnAlarmListener instance that will be invoked at that time.

    The OnAlarmListener onAlarm() method will be invoked via the specified target Executor.

    Note: Starting with API Build.VERSION_CODES#S, apps should not pass in a window of less than 10 minutes. The system will try its best to accommodate smaller windows if the alarm is supposed to fire in the near future, but there are no guarantees and the app should expect any window smaller than 10 minutes to get elongated to 10 minutes.

    Parameters
    type Int: Value is android.app.AlarmManager#RTC_WAKEUP, android.app.AlarmManager#RTC, android.app.AlarmManager#ELAPSED_REALTIME_WAKEUP, or android.app.AlarmManager#ELAPSED_REALTIME
    tag String?: This value may be null.
    executor Executor: This value cannot be null.
    listener AlarmManager.OnAlarmListener: This value cannot be null.