LayoutParams

Kotlin |Java

open class LayoutParams : LinearLayout.LayoutParams

kotlin.Any
↳	android.view.ViewGroup.LayoutParams
	↳	android.view.ViewGroup.MarginLayoutParams
		↳	android.widget.LinearLayout.LayoutParams
			↳	android.widget.TableRow.LayoutParams

Set of layout parameters used in table rows.

Summary

XML attributes
`android:layout_column`	The index of the column in which this child should be.
`android:layout_span`	Defines how many columns this child should span.

Inherited XML attributes

From class LayoutParams

android:layout_gravity

Gravity specifies how a component should be placed in its group of cells. The default is android.view.Gravity#TOP. See android.widget.LinearLayout#setGravity(int).

Must be one or more (separated by '|') of the following constant values.

Constant	Value	Description
bottom	50	Push object to the bottom of its container, not changing its size.
center	11	Place the object in the center of its container in both the vertical and horizontal axis, not changing its size.
center_horizontal	1	Place object in the horizontal center of its container, not changing its size.
center_vertical	10	Place object in the vertical center of its container, not changing its size.
clip_horizontal	8	Additional option that can be set to have the left and/or right edges of the child clipped to its container's bounds. The clip will be based on the horizontal gravity: a left gravity will clip the right edge, a right gravity will clip the left edge, and neither will clip both edges.
clip_vertical	80	Additional option that can be set to have the top and/or bottom edges of the child clipped to its container's bounds. The clip will be based on the vertical gravity: a top gravity will clip the bottom edge, a bottom gravity will clip the top edge, and neither will clip both edges.
end	800005	Push object to the end of its container, not changing its size.
fill	77	Grow the horizontal and vertical size of the object if needed so it completely fills its container.
fill_horizontal	7	Grow the horizontal size of the object if needed so it completely fills its container.
fill_vertical	70	Grow the vertical size of the object if needed so it completely fills its container.
left	3	Push object to the left of its container, not changing its size.
right	5	Push object to the right of its container, not changing its size.
start	800003	Push object to the beginning of its container, not changing its size.
top	30	Push object to the top of its container, not changing its size.

android:layout_weight

Indicates how much of the extra space in the LinearLayout is allocated to the view associated with these LayoutParams. Specify 0 if the view should not be stretched. Otherwise the extra pixels will be pro-rated among all views whose weight is greater than 0.

May be a floating point value, such as "1.2".

From class LayoutParams

android:layout_height

Specifies the basic height of the view. This is a required attribute for any view inside of a containing layout manager. Its value may be a dimension (such as "12dip") for a constant height or one of the special constants.

May be a dimension value, which is a floating point number appended with a unit such as "14.5sp". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).

Must be one of the following constant values.

Constant	Value	Description
fill_parent	ffffffff	The view should be as big as its parent (minus padding). This constant is deprecated starting from API Level 8 and is replaced by `match_parent`.
match_parent	ffffffff	The view should be as big as its parent (minus padding). Introduced in API Level 8.
wrap_content	fffffffe	The view should be only big enough to enclose its content (plus padding).

android:layout_width

Specifies the basic width of the view. This is a required attribute for any view inside of a containing layout manager. Its value may be a dimension (such as "12dip") for a constant width or one of the special constants.

Must be one of the following constant values.

Constant	Value	Description
fill_parent	ffffffff	The view should be as big as its parent (minus padding). This constant is deprecated starting from API Level 8 and is replaced by `match_parent`.
match_parent	ffffffff	The view should be as big as its parent (minus padding). Introduced in API Level 8.
wrap_content	fffffffe	The view should be only big enough to enclose its content (plus padding).

From class MarginLayoutParams

`android:layout_margin`	Specifies extra space on the left, top, right and bottom sides of this view. If both layout_margin and any of layout_marginLeft, layout_marginRight, layout_marginStart, layout_marginEnd, layout_marginTop, and layout_marginBottom are also specified, the layout_margin value will take precedence over the edge-specific values. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).
`android:layout_marginBottom`	Specifies extra space on the bottom side of this view. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).
`android:layout_marginEnd`	Specifies extra space on the end side of this view. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).
`android:layout_marginHorizontal`	Specifies extra space on the left and right sides of this view. Specifying layout_marginHorizontal is equivalent to specifying layout_marginLeft and layout_marginRight. If both layout_marginHorizontal and either/both of layout_marginLeft and layout_marginRight are also specified, the layout_marginHorizontal value will take precedence over the edge-specific values. Also, layout_margin will always take precedence over any of these values, including layout_marginHorizontal. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).
`android:layout_marginLeft`	Specifies extra space on the left side of this view. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).
`android:layout_marginRight`	Specifies extra space on the right side of this view. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).
`android:layout_marginStart`	Specifies extra space on the start side of this view. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).
`android:layout_marginTop`	Specifies extra space on the top side of this view. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).
`android:layout_marginVertical`	Specifies extra space on the top and bottom sides of this view. Specifying layout_marginVertical is equivalent to specifying layout_marginTop and layout_marginBottom with that same value. If both layout_marginVertical and either/both of layout_marginTop and layout_marginBottom are also specified, the layout_marginVertical value will take precedence over the edge-specific values. Also, layout_margin will always take precedence over any of these values, including layout_marginVertical. This space is outside this view's bounds. Margin values should be positive. May be a dimension value, which is a floating point number appended with a unit such as "`14.5sp`". Available units are: px (pixels), dp (density-independent pixels), sp (scaled pixels based on preferred font size), in (inches), and mm (millimeters).

Inherited constants

From class LayoutParams

Int

FILL_PARENT

Special value for the height or width requested by a View. FILL_PARENT means that the view wants to be as big as its parent, minus the parent's padding, if any. This value is deprecated starting in API Level 8 and replaced by MATCH_PARENT.

Int

MATCH_PARENT

Special value for the height or width requested by a View. MATCH_PARENT means that the view wants to be as big as its parent, minus the parent's padding, if any. Introduced in API Level 8.

Int

WRAP_CONTENT

Special value for the height or width requested by a View. WRAP_CONTENT means that the view wants to be just large enough to fit its own internal content, taking its own padding into account.

Public constructors
`LayoutParams(c: Context!, attrs: AttributeSet!)`
`LayoutParams(w: Int, h: Int)` Sets the child width and the child height.
`LayoutParams(w: Int, h: Int, initWeight: Float)` Sets the child width, height and weight.
`LayoutParams()` Sets the child width to `android.view.ViewGroup.LayoutParams` and the child height to `android.view.ViewGroup.LayoutParams#WRAP_CONTENT`.
`LayoutParams(column: Int)` Puts the view in the specified column.
`LayoutParams(p: ViewGroup.LayoutParams!)`
`LayoutParams(source: ViewGroup.MarginLayoutParams!)`

Protected methods
open Unit	`setBaseAttributes(a: TypedArray!, widthAttr: Int, heightAttr: Int)`

Inherited functions

From class LayoutParams

String!

debug(output: String!)

From class MarginLayoutParams

`Int`	`getLayoutDirection()` Retuns the layout direction. Can be either `View#LAYOUT_DIRECTION_LTR` or `View#LAYOUT_DIRECTION_RTL`.
`Int`	`getMarginEnd()` Returns the end margin in pixels.
`Int`	`getMarginStart()` Returns the start margin in pixels.
`Boolean`	`isMarginRelative()` Check if margins are relative.
`Unit`	`resolveLayoutDirection(layoutDirection: Int)` This will be called by `android.view.View#requestLayout()`. Left and Right margins may be overridden depending on layout direction.
`Unit`	`setLayoutDirection(layoutDirection: Int)` Set the layout direction
`Unit`	`setMarginEnd(end: Int)` Sets the relative end margin. Margin values should be positive.
`Unit`	`setMarginStart(start: Int)` Sets the relative start margin. Margin values should be positive.
`Unit`	`setMargins(left: Int, top: Int, right: Int, bottom: Int)` Sets the margins, in pixels. A call to `android.view.View#requestLayout()` needs to be done so that the new margins are taken into account. Left and right margins may be overridden by `android.view.View#requestLayout()` depending on layout direction. Margin values should be positive.

From class LayoutParams

Unit

setBaseAttributes(a: TypedArray!, widthAttr: Int, heightAttr: Int)

Extracts the layout parameters from the supplied attributes.

Properties
Int	`column` The column index of the cell represented by the widget.
Int	`span` The number of columns the widgets spans over.

Inherited properties

From class MarginLayoutParams

`Int`	`bottomMargin` The bottom margin in pixels of the child. Margin values should be positive. Call `ViewGroup#setLayoutParams(LayoutParams)` after reassigning a new value to this field.
`Int`	`leftMargin` The left margin in pixels of the child. Margin values should be positive. Call `ViewGroup#setLayoutParams(LayoutParams)` after reassigning a new value to this field.
`Int`	`rightMargin` The right margin in pixels of the child. Margin values should be positive. Call `ViewGroup#setLayoutParams(LayoutParams)` after reassigning a new value to this field.
`Int`	`topMargin` The top margin in pixels of the child. Margin values should be positive. Call `ViewGroup#setLayoutParams(LayoutParams)` after reassigning a new value to this field.

From class LayoutParams

Int

gravity

Gravity for the view associated with these LayoutParams.

Float

weight

Indicates how much of the extra space in the LinearLayout will be allocated to the view associated with these LayoutParams. Specify 0 if the view should not be stretched. Otherwise the extra pixels will be pro-rated among all views whose weight is greater than 0.

From class LayoutParams

Int

height

Information about how tall the view wants to be. Can be one of the constants FILL_PARENT (replaced by MATCH_PARENT in API Level 8) or WRAP_CONTENT, or an exact size.

LayoutAnimationController.AnimationParameters!

layoutAnimationParameters

Used to animate layouts.

Int

width

Information about how wide the view wants to be. Can be one of the constants FILL_PARENT (replaced by MATCH_PARENT in API Level 8) or WRAP_CONTENT, or an exact size.

XML attributes

android:layout_column

android:layout_column

The index of the column in which this child should be.

May be an integer value, such as "100".

android:layout_span

android:layout_span

Defines how many columns this child should span. Must be >= 1.

May be an integer value, such as "100".

Public constructors

LayoutParams

Added in API level 1

LayoutParams(
    c: Context!, 
    attrs: AttributeSet!)

LayoutParams

Added in API level 1

LayoutParams(
    w: Int, 
    h: Int)

Sets the child width and the child height.

Parameters
`w`	Int: the desired width
`h`	Int: the desired height

LayoutParams

Added in API level 1

LayoutParams(
    w: Int, 
    h: Int, 
    initWeight: Float)

Sets the child width, height and weight.

Parameters
`w`	Int: the desired width
`h`	Int: the desired height
`initWeight`	Float: the desired weight

LayoutParams

Added in API level 1

LayoutParams()

Sets the child width to android.view.ViewGroup.LayoutParams and the child height to android.view.ViewGroup.LayoutParams#WRAP_CONTENT.

LayoutParams

Added in API level 1

LayoutParams(column: Int)

Puts the view in the specified column.

Sets the child width to android.view.ViewGroup.LayoutParams#MATCH_PARENT and the child height to android.view.ViewGroup.LayoutParams#WRAP_CONTENT.

Parameters
`column`	Int: the column index for the view

LayoutParams

Added in API level 1

LayoutParams(p: ViewGroup.LayoutParams!)

LayoutParams

Added in API level 1

LayoutParams(source: ViewGroup.MarginLayoutParams!)

Protected methods

setBaseAttributes

Added in API level 1

protected open fun setBaseAttributes(
    a: TypedArray!, 
    widthAttr: Int, 
    heightAttr: Int
): Unit

Parameters
`a`	TypedArray!: the style attributes to extract the parameters from
`widthAttr`	Int: the identifier of the width attribute
`heightAttr`	Int: the identifier of the height attribute

Properties

column

Added in API level 1

var column: Int

The column index of the cell represented by the widget.

span

Added in API level 1

var span: Int

The number of columns the widgets spans over.