RotateDrawable

Kotlin |Java

open class RotateDrawable : DrawableWrapper

kotlin.Any
↳	android.graphics.drawable.Drawable
	↳	android.graphics.drawable.DrawableWrapper
		↳	android.graphics.drawable.RotateDrawable

A Drawable that can rotate another Drawable based on the current level value. The start and end angles of rotation can be controlled to map any circular arc to the level values range.

It can be defined in an XML file with the <rotate> element. For more information, see the guide to Animation Resources.

Summary

XML attributes
`android:drawable`	Reference to a drawable resource to use for the frame.
`android:fromDegrees`
`android:pivotX`
`android:pivotY`
`android:toDegrees`
`android:visible`	Provides initial visibility state of the drawable; the default value is false.

Public constructors
`RotateDrawable()` Creates a new rotating drawable with no wrapped drawable.

Public methods
open Unit	`applyTheme(t: Resources.Theme)` Applies the specified theme to this Drawable and its children.
open Unit	`draw(canvas: Canvas)`
open Float	`getFromDegrees()`
open Float	`getPivotX()`
open Float	`getPivotY()`
open Float	`getToDegrees()`
open Unit	`inflate(r: Resources, parser: XmlPullParser, attrs: AttributeSet, theme: Resources.Theme?)` Inflate this Drawable from an XML resource optionally styled by a theme.
open Boolean	`isPivotXRelative()`
open Boolean	`isPivotYRelative()`
open Unit	`setFromDegrees(fromDegrees: Float)` Sets the start angle for rotation.
open Unit	`setPivotX(pivotX: Float)` Sets the X position around which the drawable is rotated.
open Unit	`setPivotXRelative(relative: Boolean)` Sets whether the X pivot value represents a fraction of the drawable width or an absolute value in pixels.
open Unit	`setPivotY(pivotY: Float)` Sets the Y position around which the drawable is rotated.
open Unit	`setPivotYRelative(relative: Boolean)` Sets whether the Y pivot value represents a fraction of the drawable height or an absolute value in pixels.
open Unit	`setToDegrees(toDegrees: Float)` Sets the end angle for rotation.

Protected methods
open Boolean	`onLevelChange(level: Int)`

Inherited functions

From class DrawableWrapper

`Boolean`	`canApplyTheme()`
`Int`	`getAlpha()`
`Int`	`getChangingConfigurations()` Return a mask of the configuration parameters for which this drawable may change, requiring that it be re-created. The default implementation returns whatever was provided through `setChangingConfigurations(int)` or 0 by default. Subclasses may extend this to or in the changing configurations of any other drawables they hold.
`ColorFilter?`	`getColorFilter()`
`Drawable.ConstantState?`	`getConstantState()` Return a `ConstantState` instance that holds the shared state of this Drawable.
`Drawable?`	`getDrawable()`
`Unit`	`getHotspotBounds(outRect: Rect)` Populates `outRect` with the hotspot bounds.
`Int`	`getIntrinsicHeight()`
`Int`	`getIntrinsicWidth()`
`Int`	`getOpacity()`
`Insets`	`getOpticalInsets()`
`Unit`	`getOutline(outline: Outline)` Called to get the drawable to populate the Outline that defines its drawing area. This method is called by the default `android.view.ViewOutlineProvider` to define the outline of the View. The default behavior defines the outline to be the bounding rectangle of 0 alpha. Subclasses that wish to convey a different shape or alpha value must override this method.
`Boolean`	`getPadding(padding: Rect)` Return in padding the insets suggested by this Drawable for placing content inside the drawable's bounds. Positive values move toward the center of the Drawable (set Rect.inset).
`Boolean`	`hasFocusStateSpecified()`
`Unit`	`invalidateDrawable(who: Drawable)` Called when the drawable needs to be redrawn. A view at this point should invalidate itself (or at least the part of itself where the drawable appears).
`Boolean`	`isStateful()`
`Unit`	`jumpToCurrentState()`
`Drawable`	`mutate()` Make this drawable mutable. This operation cannot be reversed. A mutable drawable is guaranteed to not share its state with any other drawable. This is especially useful when you need to modify properties of drawables loaded from resources. By default, all drawables instances loaded from the same resource share a common state; if you modify the state of one instance, all the other instances will receive the same modification. Calling this method on a mutable Drawable will have no effect.
`Unit`	`onBoundsChange(bounds: Rect)` Override this in your subclass to change appearance if you vary based on the bounds.
`Boolean`	`onLayoutDirectionChanged(layoutDirection: Int)` Called when the drawable's resolved layout direction changes.
`Boolean`	`onStateChange(state: IntArray)` Override this in your subclass to change appearance if you recognize the specified state.
`Unit`	`scheduleDrawable(who: Drawable, what: Runnable, when: Long)` A Drawable can call this to schedule the next frame of its animation. An implementation can generally simply call `android.os.Handler#postAtTime(Runnable, Object, long)` with the parameters (what, who, when) to perform the scheduling.
`Unit`	`setAlpha(alpha: Int)`
`Unit`	`setColorFilter(colorFilter: ColorFilter?)` Specify an optional color filter for the drawable. If a Drawable has a ColorFilter, each output pixel of the Drawable's drawing contents will be modified by the color filter before it is blended onto the render target of a Canvas. Pass `null` to remove any existing color filter. Note: Setting a non-`null` color filter disables `tint`.
`Unit`	`setDrawable(dr: Drawable?)` Sets the wrapped drawable.
`Unit`	`setHotspot(x: Float, y: Float)`
`Unit`	`setHotspotBounds(left: Int, top: Int, right: Int, bottom: Int)`
`Unit`	`setTintBlendMode(blendMode: BlendMode!)` Specifies a tint blending mode for this drawable. Defines how this drawable's tint color should be blended into the drawable before it is drawn to screen. Default tint mode is `BlendMode#SRC_IN`. Note: Setting a color filter via `setColorFilter(android.graphics.ColorFilter)`
`Unit`	`setTintList(tint: ColorStateList?)` Specifies tint color for this drawable as a color state list. A Drawable's drawing content will be blended together with its tint before it is drawn to the screen. This functions similarly to `setColorFilter(int,android.graphics.PorterDuff.Mode)`. Note: Setting a color filter via `setColorFilter(android.graphics.ColorFilter)` or `setColorFilter(int,android.graphics.PorterDuff.Mode)` overrides tint.
`Boolean`	`setVisible(visible: Boolean, restart: Boolean)`
`Unit`	`unscheduleDrawable(who: Drawable, what: Runnable)` A Drawable can call this to unschedule an action previously scheduled with `scheduleDrawable`. An implementation can generally simply call `android.os.Handler#removeCallbacks(Runnable, Object)` with the parameters (what, who) to unschedule the drawable.

From class Drawable

`Unit`	`clearColorFilter()` Removes the color filter for this drawable.
`Unit`	`copyBounds(bounds: Rect)` Return a copy of the drawable's bounds in the specified Rect (allocated by the caller). The bounds specify where this will draw when its draw() method is called.
`Rect`	`copyBounds()` Return a copy of the drawable's bounds in a new Rect. This returns the same values as getBounds(), but the returned object is guaranteed to not be changed later by the drawable (i.e. it retains no reference to this rect). If the caller already has a Rect allocated, call copyBounds(rect).
`Drawable?`	`createFromPath(pathName: String!)` Create a drawable from file path name.
`Drawable?`	`createFromResourceStream(res: Resources?, value: TypedValue?, is: InputStream?, srcName: String?)` Create a drawable from an inputstream, using the given resources and value to determine density information.
`Drawable?`	`createFromResourceStream(res: Resources?, value: TypedValue?, is: InputStream?, srcName: String?, opts: BitmapFactory.Options?)` Create a drawable from an inputstream, using the given resources and value to determine density information.
`Drawable?`	`createFromStream(is: InputStream?, srcName: String?)` Create a drawable from an inputstream
`Drawable`	`createFromXml(r: Resources, parser: XmlPullParser)` Create a drawable from an XML document. For more information on how to create resources in XML, see Drawable Resources.
`Drawable`	`createFromXml(r: Resources, parser: XmlPullParser, theme: Resources.Theme?)` Create a drawable from an XML document using an optional `Theme`. For more information on how to create resources in XML, see Drawable Resources.
`Drawable`	`createFromXmlInner(r: Resources, parser: XmlPullParser, attrs: AttributeSet)` Create from inside an XML document. Called on a parser positioned at a tag in an XML document, tries to create a Drawable from that tag. Returns null if the tag is not a valid drawable.
`Drawable`	`createFromXmlInner(r: Resources, parser: XmlPullParser, attrs: AttributeSet, theme: Resources.Theme?)` Create a drawable from inside an XML document using an optional `Theme`. Called on a parser positioned at a tag in an XML document, tries to create a Drawable from that tag. Returns `null` if the tag is not a valid drawable.
`Rect`	`getBounds()` Return the drawable's bounds Rect. Note: for efficiency, the returned object may be the same object stored in the drawable (though this is not guaranteed), so if a persistent copy of the bounds is needed, call copyBounds(rect) instead. You should also not change the object returned by this method as it may be the same object stored in the drawable.
`Drawable.Callback?`	`getCallback()` Return the current `Callback` implementation attached to this Drawable.
`Drawable`	`getCurrent()`
`Rect`	`getDirtyBounds()` Return the drawable's dirty bounds Rect. Note: for efficiency, the returned object may be the same object stored in the drawable (though this is not guaranteed). By default, this returns the full drawable bounds. Custom drawables may override this method to perform more precise invalidation.
`Int`	`getLayoutDirection()` Returns the resolved layout direction for this Drawable.
`Int`	`getLevel()` Retrieve the current level.
`Int`	`getMinimumHeight()` Returns the minimum height suggested by this Drawable. If a View uses this Drawable as a background, it is suggested that the View use at least this value for its height. (There will be some scenarios where this will not be possible.) This value should INCLUDE any padding.
`Int`	`getMinimumWidth()` Returns the minimum width suggested by this Drawable. If a View uses this Drawable as a background, it is suggested that the View use at least this value for its width. (There will be some scenarios where this will not be possible.) This value should INCLUDE any padding.
`IntArray`	`getState()` Describes the current state, as a union of primitive states, such as `android.R.attr#state_focused`, `android.R.attr#state_selected`, etc. Some drawables may modify their imagery based on the selected state.
`Region?`	`getTransparentRegion()` Returns a Region representing the part of the Drawable that is completely transparent. This can be used to perform drawing operations, identifying which parts of the target will not change when rendering the Drawable. The default implementation returns null, indicating no transparent region; subclasses can optionally override this to return an actual Region if they want to supply this optimization information, but it is not required that they do so.
`Unit`	`inflate(r: Resources, parser: XmlPullParser, attrs: AttributeSet)` Inflate this Drawable from an XML resource. Does not apply a theme.
`Unit`	`invalidateSelf()` Use the current `Callback` implementation to have this Drawable redrawn. Does nothing if there is no Callback attached to the Drawable.
`Boolean`	`isAutoMirrored()` Tells if this Drawable will be automatically mirrored when its layout direction is RTL right-to-left. See `android.util.LayoutDirection`.
`Boolean`	`isFilterBitmap()`
`Boolean`	`isProjected()` Whether this drawable requests projection. Indicates that the `android.graphics.RenderNode` this Drawable will draw into should be drawn immediately after the closest ancestor RenderNode containing a projection receiver.
`Boolean`	`isVisible()`
`Int`	`resolveOpacity(op1: Int, op2: Int)` Return the appropriate opacity value for two source opacities. If either is UNKNOWN, that is returned; else, if either is TRANSLUCENT, that is returned; else, if either is TRANSPARENT, that is returned; else, OPAQUE is returned. This is to help in implementing `getOpacity`.
`Unit`	`scheduleSelf(what: Runnable, when: Long)` Use the current `Callback` implementation to have this Drawable scheduled. Does nothing if there is no Callback attached to the Drawable.
`Unit`	`setAutoMirrored(mirrored: Boolean)` Set whether this Drawable is automatically mirrored when its layout direction is RTL (right-to left). See `android.util.LayoutDirection`.
`Unit`	`setBounds(left: Int, top: Int, right: Int, bottom: Int)` Specify a bounding rectangle for the Drawable. This is where the drawable will draw when its draw() method is called.
`Unit`	`setBounds(bounds: Rect)` Specify a bounding rectangle for the Drawable. This is where the drawable will draw when its draw() method is called.
`Unit`	`setCallback(cb: Drawable.Callback?)` Bind a `Callback` object to this Drawable. Required for clients that want to support animated drawables.
`Unit`	`setChangingConfigurations(configs: Int)` Set a mask of the configuration parameters for which this drawable may change, requiring that it be re-created.
`Unit`	`setColorFilter(color: Int, mode: PorterDuff.Mode)` Specify a color and Porter-Duff mode to be the color filter for this drawable. Convenience for `setColorFilter(android.graphics.ColorFilter)` which constructs a `PorterDuffColorFilter`. Note: Setting a color filter disables `tint`.
`Unit`	`setDither(dither: Boolean)` Set to true to have the drawable dither its colors when drawn to a device with fewer than 8-bits per color component.
`Unit`	`setFilterBitmap(filter: Boolean)` Set to true to have the drawable filter its bitmaps with bilinear sampling when they are scaled or rotated. This can improve appearance when bitmaps are rotated. If the drawable does not use bitmaps, this call is ignored.
`Boolean`	`setLayoutDirection(layoutDirection: Int)` Set the layout direction for this drawable. Should be a resolved layout direction, as the Drawable has no capacity to do the resolution on its own.
`Boolean`	`setLevel(level: Int)` Specify the level for the drawable. This allows a drawable to vary its imagery based on a continuous controller, for example to show progress or volume level. If the new level you are supplying causes the appearance of the Drawable to change, then it is responsible for calling `invalidateSelf` in order to have itself redrawn, and true will be returned from this function.
`Boolean`	`setState(stateSet: IntArray)` Specify a set of states for the drawable. These are use-case specific, so see the relevant documentation. As an example, the background for widgets like Button understand the following states: [`android.R.attr#state_focused`, `android.R.attr#state_pressed`]. If the new state you are supplying causes the appearance of the Drawable to change, then it is responsible for calling `invalidateSelf` in order to have itself redrawn, and true will be returned from this function. Note: The Drawable holds a reference on to stateSet until a new state array is given to it, so you must not modify this array during that time.
`Unit`	`setTint(tintColor: Int)` Specifies tint color for this drawable. A Drawable's drawing content will be blended together with its tint before it is drawn to the screen. This functions similarly to `setColorFilter(int,android.graphics.PorterDuff.Mode)`. To clear the tint, pass `null` to `setTintList(android.content.res.ColorStateList)`. Note: Setting a color filter via `setColorFilter(android.graphics.ColorFilter)` or `setColorFilter(int,android.graphics.PorterDuff.Mode)` overrides tint.
`Unit`	`setTintMode(tintMode: PorterDuff.Mode?)` Specifies a tint blending mode for this drawable. Defines how this drawable's tint color should be blended into the drawable before it is drawn to screen. Default tint mode is `PorterDuff.Mode#SRC_IN`. Note: Setting a color filter via `setColorFilter(android.graphics.ColorFilter)` or `setColorFilter(int,android.graphics.PorterDuff.Mode)` overrides tint.
`Unit`	`unscheduleSelf(what: Runnable)` Use the current `Callback` implementation to have this Drawable unscheduled. Does nothing if there is no Callback attached to the Drawable.

XML attributes

android:drawable

android:drawable

Reference to a drawable resource to use for the frame. If not given, the drawable must be defined by the first child tag.

May be a reference to another resource, in the form "@[+][package:]type/name" or a theme attribute in the form "?[package:]type/name".

android:fromDegrees

android:fromDegrees

android:pivotX

android:pivotX

android:pivotY

android:pivotY

android:toDegrees

android:toDegrees

android:visible

android:visible

Provides initial visibility state of the drawable; the default value is false. See android.graphics.drawable.Drawable#setVisible.

May be a boolean value, such as "true" or "false".

Public constructors

RotateDrawable

Added in API level 1

RotateDrawable()

Creates a new rotating drawable with no wrapped drawable.

Public methods

applyTheme

Added in API level 21

open fun applyTheme(t: Resources.Theme): Unit

Applies the specified theme to this Drawable and its children.

Parameters
`t`	Resources.Theme: This value cannot be `null`.

draw

Added in API level 1

open fun draw(canvas: Canvas): Unit

Parameters
`canvas`	Canvas: This value cannot be `null`.

getFromDegrees

Added in API level 21

open fun getFromDegrees(): Float

Return
`Float`	starting angle for rotation in degrees

See Also

#setFromDegrees(float)

getPivotX

Added in API level 21

open fun getPivotX(): Float

Return
`Float`	X position around which to rotate

See Also

#setPivotX(float)

getPivotY

Added in API level 21

open fun getPivotY(): Float

Return
`Float`	Y position around which to rotate

See Also

#setPivotY(float)

getToDegrees

Added in API level 21

open fun getToDegrees(): Float

Return
`Float`	ending angle for rotation in degrees

See Also

#setToDegrees(float)

inflate

Added in API level 21

open fun inflate(
    r: Resources, 
    parser: XmlPullParser, 
    attrs: AttributeSet, 
    theme: Resources.Theme?
): Unit

Inflate this Drawable from an XML resource optionally styled by a theme. This can't be called more than once for each Drawable. Note that framework may have called this once to create the Drawable instance from XML resource.

Parameters
`r`	Resources: This value cannot be `null`.
`parser`	XmlPullParser: This value cannot be `null`.
`attrs`	AttributeSet: This value cannot be `null`.
`theme`	Resources.Theme?: This value may be `null`.

Exceptions
`org.xmlpull.v1.XmlPullParserException`
`java.io.IOException`

isPivotXRelative

Added in API level 21

open fun isPivotXRelative(): Boolean

Return
`Boolean`	true if the X pivot represents a fraction of the drawable width, or false if it represents an absolute value in pixels

See Also

#setPivotXRelative(boolean)

isPivotYRelative

Added in API level 21

open fun isPivotYRelative(): Boolean

Return
`Boolean`	true if the Y pivot represents a fraction of the drawable height, or false if it represents an absolute value in pixels

See Also

#setPivotYRelative(boolean)

setFromDegrees

Added in API level 21

open fun setFromDegrees(fromDegrees: Float): Unit

Sets the start angle for rotation.

Parameters
`fromDegrees`	Float: starting angle in degrees

See Also

#getFromDegrees()

setPivotX

Added in API level 21

open fun setPivotX(pivotX: Float): Unit

Sets the X position around which the drawable is rotated.

If the X pivot is relative (as specified by setPivotXRelative(boolean)), then the position represents a fraction of the drawable width. Otherwise, the position represents an absolute value in pixels.

Parameters
`pivotX`	Float: X position around which to rotate

See Also

#setPivotXRelative(boolean)

setPivotXRelative

Added in API level 21

open fun setPivotXRelative(relative: Boolean): Unit

Sets whether the X pivot value represents a fraction of the drawable width or an absolute value in pixels.

Parameters
`relative`	Boolean: true if the X pivot represents a fraction of the drawable width, or false if it represents an absolute value in pixels

See Also

#isPivotXRelative()

setPivotY

Added in API level 21

open fun setPivotY(pivotY: Float): Unit

Sets the Y position around which the drawable is rotated.

If the Y pivot is relative (as specified by setPivotYRelative(boolean)), then the position represents a fraction of the drawable height. Otherwise, the position represents an absolute value in pixels.

Parameters
`pivotY`	Float: Y position around which to rotate

See Also

#getPivotY()

setPivotYRelative

Added in API level 21

open fun setPivotYRelative(relative: Boolean): Unit

Sets whether the Y pivot value represents a fraction of the drawable height or an absolute value in pixels.

Parameters
`relative`	Boolean: True if the Y pivot represents a fraction of the drawable height, or false if it represents an absolute value in pixels

See Also

#isPivotYRelative()

setToDegrees

Added in API level 21

open fun setToDegrees(toDegrees: Float): Unit

Sets the end angle for rotation.

Parameters
`toDegrees`	Float: ending angle in degrees

See Also

#getToDegrees()

Protected methods

onLevelChange

Added in API level 1

protected open fun onLevelChange(level: Int): Boolean

Return
`Boolean`	Returns true if the level change has caused the appearance of the Drawable to change (that is, it needs to be drawn), else false if it looks the same and there is no need to redraw it since its last level.