Added in API level 1

WeakHashMap

open class WeakHashMap<K : Any!, V : Any!> : AbstractMap<K, V>, MutableMap<K, V>
kotlin.Any
   ↳ java.util.AbstractMap<K, V>
   ↳ java.util.WeakHashMap

Hash table based implementation of the Map interface, with weak keys. An entry in a WeakHashMap will automatically be removed when its key is no longer in ordinary use. More precisely, the presence of a mapping for a given key will not prevent the key from being discarded by the garbage collector, that is, made finalizable, finalized, and then reclaimed. When a key has been discarded its entry is effectively removed from the map, so this class behaves somewhat differently from other Map implementations.

Both null values and the null key are supported. This class has performance characteristics similar to those of the HashMap class, and has the same efficiency parameters of initial capacity and load factor.

Like most collection classes, this class is not synchronized. A synchronized WeakHashMap may be constructed using the Collections.synchronizedMap method.

This class is intended primarily for use with key objects whose equals methods test for object identity using the == operator. Once such a key is discarded it can never be recreated, so it is impossible to do a lookup of that key in a WeakHashMap at some later time and be surprised that its entry has been removed. This class will work perfectly well with key objects whose equals methods are not based upon object identity, such as String instances. With such recreatable key objects, however, the automatic removal of WeakHashMap entries whose keys have been discarded may prove to be confusing.

The behavior of the WeakHashMap class depends in part upon the actions of the garbage collector, so several familiar (though not required) Map invariants do not hold for this class. Because the garbage collector may discard keys at any time, a WeakHashMap may behave as though an unknown thread is silently removing entries. In particular, even if you synchronize on a WeakHashMap instance and invoke none of its mutator methods, it is possible for the size method to return smaller values over time, for the isEmpty method to return false and then true, for the containsKey method to return true and later false for a given key, for the get method to return a value for a given key but later return null, for the put method to return null and the remove method to return false for a key that previously appeared to be in the map, and for successive examinations of the key set, the value collection, and the entry set to yield successively smaller numbers of elements.

Each key object in a WeakHashMap is stored indirectly as the referent of a weak reference. Therefore a key will automatically be removed only after the weak references to it, both inside and outside of the map, have been cleared by the garbage collector.

Implementation note: The value objects in a WeakHashMap are held by ordinary strong references. Thus care should be taken to ensure that value objects do not strongly refer to their own keys, either directly or indirectly, since that will prevent the keys from being discarded. Note that a value object may refer indirectly to its key via the WeakHashMap itself; that is, a value object may strongly refer to some other key object whose associated value object, in turn, strongly refers to the key of the first value object. If the values in the map do not rely on the map holding strong references to them, one way to deal with this is to wrap values themselves within WeakReferences before inserting, as in: m.put(key, new WeakReference(value)), and then unwrapping upon each get.

The iterators returned by the iterator method of the collections returned by all of this class's "collection view methods" are fail-fast: if the map is structurally modified at any time after the iterator is created, in any way except through the iterator's own remove method, the iterator will throw a ConcurrentModificationException. Thus, in the face of concurrent modification, the iterator fails quickly and cleanly, rather than risking arbitrary, non-deterministic behavior at an undetermined time in the future.

Note that the fail-fast behavior of an iterator cannot be guaranteed as it is, generally speaking, impossible to make any hard guarantees in the presence of unsynchronized concurrent modification. Fail-fast iterators throw ConcurrentModificationException on a best-effort basis. Therefore, it would be wrong to write a program that depended on this exception for its correctness: the fail-fast behavior of iterators should be used only to detect bugs.

This class is a member of the Java Collections Framework.

Summary

Public constructors

Constructs a new, empty WeakHashMap with the default initial capacity (16) and load factor (0.75).

WeakHashMap(initialCapacity: Int)

Constructs a new, empty WeakHashMap with the given initial capacity and the default load factor (0.75).

WeakHashMap(initialCapacity: Int, loadFactor: Float)

Constructs a new, empty WeakHashMap with the given initial capacity and the given load factor.

WeakHashMap(m: MutableMap<out K, out V>)

Constructs a new WeakHashMap with the same mappings as the specified map.

Public methods
open Unit

Removes all of the mappings from this map.

open Boolean
containsKey(key: K?)

Returns true if this map contains a mapping for the specified key.

open Boolean
containsValue(value: V?)

Returns true if this map maps one or more keys to the specified value.

open Unit
forEach(action: BiConsumer<in K, in V>)

open V?
get(key: K?)

Returns the value to which the specified key is mapped, or null if this map contains no mapping for the key.

open Boolean

Returns true if this map contains no key-value mappings.

open static WeakHashMap<K, V>
newWeakHashMap(numMappings: Int)

Creates a new, empty WeakHashMap suitable for the expected number of mappings.

open V?
put(key: K, value: V)

Associates the specified value with the specified key in this map.

open Unit
putAll(from: Map<out K, V>)

Copies all of the mappings from the specified map to this map.

open V?
remove(key: K?)

Removes the mapping for a key from this weak hash map if it is present.

open Unit
replaceAll(function: BiFunction<in K, in V, out V>)

Inherited functions
Properties
open MutableSet<MutableEntry<K, V>>

Returns a Set view of the mappings contained in this map.

open MutableSet<K>

Returns a Set view of the keys contained in this map.

open Int

Returns the number of key-value mappings in this map.

open MutableCollection<V>

Returns a Collection view of the values contained in this map.

Public constructors

WeakHashMap

Added in API level 1
WeakHashMap()

Constructs a new, empty WeakHashMap with the default initial capacity (16) and load factor (0.75).

WeakHashMap

Added in API level 1
WeakHashMap(initialCapacity: Int)

Constructs a new, empty WeakHashMap with the given initial capacity and the default load factor (0.75).

Parameters
initialCapacity Int: The initial capacity of the WeakHashMap
Exceptions
java.lang.IllegalArgumentException if the initial capacity is negative

WeakHashMap

Added in API level 1
WeakHashMap(
    initialCapacity: Int,
    loadFactor: Float)

Constructs a new, empty WeakHashMap with the given initial capacity and the given load factor.

Parameters
initialCapacity Int: The initial capacity of the WeakHashMap
loadFactor Float: The load factor of the WeakHashMap
Exceptions
java.lang.IllegalArgumentException if the initial capacity is negative, or if the load factor is nonpositive.

WeakHashMap

Added in API level 1
WeakHashMap(m: MutableMap<out K, out V>)

Constructs a new WeakHashMap with the same mappings as the specified map. The WeakHashMap is created with the default load factor (0.75) and an initial capacity sufficient to hold the mappings in the specified map.

Parameters
m MutableMap<out K, out V>: the map whose mappings are to be placed in this map
Exceptions
java.lang.NullPointerException if the specified map is null

Public methods

clear

Added in API level 1
open fun clear(): Unit

Removes all of the mappings from this map. The map will be empty after this call returns.

Exceptions
java.lang.UnsupportedOperationException if the clear operation is not supported by this map

containsKey

Added in API level 1
open fun containsKey(key: K?): Boolean

Returns true if this map contains a mapping for the specified key.

Parameters
key K?: The key whose presence in this map is to be tested
Return
Boolean true if there is a mapping for key; false otherwise
Exceptions
java.lang.ClassCastException if the key is of an inappropriate type for this map (java.util.Collection#)
java.lang.NullPointerException if the specified key is null and this map does not permit null keys (java.util.Collection#)

containsValue

Added in API level 1
open fun containsValue(value: V?): Boolean

Returns true if this map maps one or more keys to the specified value.

Parameters
value V?: value whose presence in this map is to be tested
Return
Boolean true if this map maps one or more keys to the specified value
Exceptions
java.lang.ClassCastException if the value is of an inappropriate type for this map (java.util.Collection#)
java.lang.NullPointerException if the specified value is null and this map does not permit null values (java.util.Collection#)

forEach

Added in API level 24
open fun forEach(action: BiConsumer<in K, in V>): Unit
Parameters
action BiConsumer<in K, in V>: The action to be performed for each entry
Exceptions
java.lang.NullPointerException if the specified action is null
java.util.ConcurrentModificationException if an entry is found to be removed during iteration

get

Added in API level 1
open fun get(key: K?): V?

Returns the value to which the specified key is mapped, or null if this map contains no mapping for the key.

More formally, if this map contains a mapping from a key k to a value v such that Objects.equals(key, k), then this method returns v; otherwise it returns null. (There can be at most one such mapping.)

A return value of null does not necessarily indicate that the map contains no mapping for the key; it's also possible that the map explicitly maps the key to null. The containsKey operation may be used to distinguish these two cases.

Parameters
key K?: the key whose associated value is to be returned
Return
V? the value to which the specified key is mapped, or null if this map contains no mapping for the key
Exceptions
java.lang.ClassCastException if the key is of an inappropriate type for this map (java.util.Collection#)
java.lang.NullPointerException if the specified key is null and this map does not permit null keys (java.util.Collection#)

isEmpty

Added in API level 1
open fun isEmpty(): Boolean

Returns true if this map contains no key-value mappings. This result is a snapshot, and may not reflect unprocessed entries that will be removed before next attempted access because they are no longer referenced.

Return
Boolean true if this map contains no key-value mappings

newWeakHashMap

open static fun <K : Any!, V : Any!> newWeakHashMap(numMappings: Int): WeakHashMap<K, V>

Creates a new, empty WeakHashMap suitable for the expected number of mappings. The returned map uses the default load factor of 0.75, and its initial capacity is generally large enough so that the expected number of mappings can be added without resizing the map.

Parameters
numMappings Int: the expected number of mappings
<K> the type of keys maintained by the new map
<V> the type of mapped values
Return
WeakHashMap<K, V> the newly created map
Exceptions
java.lang.IllegalArgumentException if numMappings is negative

put

Added in API level 1
open fun put(
    key: K,
    value: V
): V?

Associates the specified value with the specified key in this map. If the map previously contained a mapping for this key, the old value is replaced.

Parameters
key K: key with which the specified value is to be associated.
value V: value to be associated with the specified key.
Return
V? the previous value associated with key, or null if there was no mapping for key. (A null return can also indicate that the map previously associated null with key.)
Exceptions
java.lang.UnsupportedOperationException if the put operation is not supported by this map
java.lang.ClassCastException if the class of the specified key or value prevents it from being stored in this map
java.lang.NullPointerException if the specified key or value is null and this map does not permit null keys or values
java.lang.IllegalArgumentException if some property of the specified key or value prevents it from being stored in this map

putAll

Added in API level 1
open fun putAll(from: Map<out K, V>): Unit

Copies all of the mappings from the specified map to this map. These mappings will replace any mappings that this map had for any of the keys currently in the specified map.

Parameters
m mappings to be stored in this map.
Exceptions
java.lang.UnsupportedOperationException if the putAll operation is not supported by this map
java.lang.ClassCastException if the class of a key or value in the specified map prevents it from being stored in this map
java.lang.NullPointerException if the specified map is null.
java.lang.IllegalArgumentException if some property of a key or value in the specified map prevents it from being stored in this map

remove

Added in API level 1
open fun remove(key: K?): V?

Removes the mapping for a key from this weak hash map if it is present. More formally, if this map contains a mapping from key k to value v such that (key==null ? k==null : key.equals(k)), that mapping is removed. (The map can contain at most one such mapping.)

Returns the value to which this map previously associated the key, or null if the map contained no mapping for the key. A return value of null does not necessarily indicate that the map contained no mapping for the key; it's also possible that the map explicitly mapped the key to null.

The map will not contain a mapping for the specified key once the call returns.

Parameters
key K?: key whose mapping is to be removed from the map
Return
V? the previous value associated with key, or null if there was no mapping for key
Exceptions
java.lang.UnsupportedOperationException if the remove operation is not supported by this map
java.lang.ClassCastException if the key is of an inappropriate type for this map (java.util.Collection#)
java.lang.NullPointerException if the specified key is null and this map does not permit null keys (java.util.Collection#)

replaceAll

Added in API level 24
open fun replaceAll(function: BiFunction<in K, in V, out V>): Unit
Parameters
function BiFunction<in K, in V, out V>: the function to apply to each entry
Exceptions
java.lang.UnsupportedOperationException if the set operation is not supported by this map's entry set iterator.
java.lang.ClassCastException if the class of a replacement value prevents it from being stored in this map (java.util.Collection#)
java.lang.NullPointerException if the specified function is null, or if a replacement value is null and this map does not permit null values (java.util.Collection#)
java.lang.IllegalArgumentException if some property of a replacement value prevents it from being stored in this map (java.util.Collection#)
java.util.ConcurrentModificationException if an entry is found to be removed during iteration

Properties

entries

Added in API level 1
open val entries: MutableSet<MutableEntry<K, V>>

Returns a Set view of the mappings contained in this map. The set is backed by the map, so changes to the map are reflected in the set, and vice-versa. If the map is modified while an iteration over the set is in progress (except through the iterator's own remove operation, or through the setValue operation on a map entry returned by the iterator) the results of the iteration are undefined. The set supports element removal, which removes the corresponding mapping from the map, via the Iterator.remove, Set.remove, removeAll, retainAll and clear operations. It does not support the add or addAll operations.

Return
MutableSet<MutableEntry<K, V>> a set view of the mappings contained in this map

keys

Added in API level 1
open val keys: MutableSet<K>

Returns a Set view of the keys contained in this map. The set is backed by the map, so changes to the map are reflected in the set, and vice-versa. If the map is modified while an iteration over the set is in progress (except through the iterator's own remove operation), the results of the iteration are undefined. The set supports element removal, which removes the corresponding mapping from the map, via the Iterator.remove, Set.remove, removeAll, retainAll, and clear operations. It does not support the add or addAll operations.

Return
MutableSet<K> a set view of the keys contained in this map

size

Added in API level 1
open val size: Int

Returns the number of key-value mappings in this map. This result is a snapshot, and may not reflect unprocessed entries that will be removed before next attempted access because they are no longer referenced.

Return
Int the number of key-value mappings in this map

values

Added in API level 1
open val values: MutableCollection<V>

Returns a Collection view of the values contained in this map. The collection is backed by the map, so changes to the map are reflected in the collection, and vice-versa. If the map is modified while an iteration over the collection is in progress (except through the iterator's own remove operation), the results of the iteration are undefined. The collection supports element removal, which removes the corresponding mapping from the map, via the Iterator.remove, Collection.remove, removeAll, retainAll and clear operations. It does not support the add or addAll operations.

Return
MutableCollection<V> a collection view of the values contained in this map