BitSet

BitSet

BitSet()

Creates a new bit set. All bits are initially false.

BitSet

BitSet(nbits: Int)

Creates a bit set whose initial size is large enough to explicitly represent bits with indices in the range 0 through nbits-1. All bits are initially false.

and

open fun and(set: BitSet!): Unit

Performs a logical AND of this target bit set with the argument bit set. This bit set is modified so that each bit in it has the value true if and only if it both initially had the value true and the corresponding bit in the bit set argument also had the value true.

andNot

open fun andNot(set: BitSet!): Unit

Clears all of the bits in this BitSet whose corresponding bit is set in the specified BitSet.

cardinality

open fun cardinality(): Int

Returns the number of bits set to true in this BitSet.

clear

open fun clear(bitIndex: Int): Unit

Sets the bit specified by the index to false.

clear

open fun clear(
    fromIndex: Int, 
    toIndex: Int
): Unit

Sets the bits from the specified fromIndex (inclusive) to the specified toIndex (exclusive) to false.

clear

open fun clear(): Unit

Sets all of the bits in this BitSet to false.

clone

open fun clone(): Any

Cloning this BitSet produces a new BitSet that is equal to it. The clone of the bit set is another bit set that has exactly the same bits set to true as this bit set.

equals

open fun equals(other: Any?): Boolean

Compares this object against the specified object. The result is true if and only if the argument is not null and is a BitSet object that has exactly the same set of bits set to true as this bit set. That is, for every nonnegative int index k,

((BitSet)obj).get(k) == this.get(k)

flip

open fun flip(bitIndex: Int): Unit

Sets the bit at the specified index to the complement of its current value.

flip

open fun flip(
    fromIndex: Int, 
    toIndex: Int
): Unit

Sets each bit from the specified fromIndex (inclusive) to the specified toIndex (exclusive) to the complement of its current value.

get

open fun get(bitIndex: Int): Boolean

Returns the value of the bit with the specified index. The value is true if the bit with the index bitIndex is currently set in this BitSet; otherwise, the result is false.

get

open fun get(
    fromIndex: Int, 
    toIndex: Int
): BitSet!

Returns a new BitSet composed of bits from this BitSet from fromIndex (inclusive) to toIndex (exclusive).

hashCode

open fun hashCode(): Int

Returns the hash code value for this bit set. The hash code depends only on which bits are set within this BitSet.

The hash code is defined to be the result of the following calculation:

<code>public int hashCode() {
      long h = 1234;
      long[] words = toLongArray();
      for (int i = words.length; --i &gt;= 0; )
          h ^= words[i] * (i + 1);
      return (int)((h &gt;&gt; 32) ^ h);
  }</code>

intersects

open fun intersects(set: BitSet!): Boolean

Returns true if the specified BitSet has any bits set to true that are also set to true in this BitSet.

isEmpty

open fun isEmpty(): Boolean

Returns true if this BitSet contains no bits that are set to true.

length

open fun length(): Int

Returns the "logical size" of this BitSet: the index of the highest set bit in the BitSet plus one. Returns zero if the BitSet contains no set bits.

nextClearBit

open fun nextClearBit(fromIndex: Int): Int

Returns the index of the first bit that is set to false that occurs on or after the specified starting index.

nextSetBit

open fun nextSetBit(fromIndex: Int): Int

Returns the index of the first bit that is set to true that occurs on or after the specified starting index. If no such bit exists then -1 is returned.

To iterate over the true bits in a BitSet, use the following loop:

<code>for (int i = bs.nextSetBit(0); i &gt;= 0; i = bs.nextSetBit(i+1)) {
      // operate on index i here
      if (i == Integer.MAX_VALUE) {
          break; // or (i+1) would overflow
      }
  }</code>

or

open fun or(set: BitSet!): Unit

Performs a logical OR of this bit set with the bit set argument. This bit set is modified so that a bit in it has the value true if and only if it either already had the value true or the corresponding bit in the bit set argument has the value true.

previousClearBit

open fun previousClearBit(fromIndex: Int): Int

Returns the index of the nearest bit that is set to false that occurs on or before the specified starting index. If no such bit exists, or if -1 is given as the starting index, then -1 is returned.

previousSetBit

open fun previousSetBit(fromIndex: Int): Int

Returns the index of the nearest bit that is set to true that occurs on or before the specified starting index. If no such bit exists, or if -1 is given as the starting index, then -1 is returned.

To iterate over the true bits in a BitSet, use the following loop:

<code>for (int i = bs.length(); (i = bs.previousSetBit(i-1)) &gt;= 0; ) {
      // operate on index i here
  }</code>

set

open fun set(bitIndex: Int): Unit

Sets the bit at the specified index to true.

set

open fun set(
    bitIndex: Int, 
    value: Boolean
): Unit

Sets the bit at the specified index to the specified value.

set

open fun set(
    fromIndex: Int, 
    toIndex: Int
): Unit

Sets the bits from the specified fromIndex (inclusive) to the specified toIndex (exclusive) to true.

set

open fun set(
    fromIndex: Int, 
    toIndex: Int, 
    value: Boolean
): Unit

Sets the bits from the specified fromIndex (inclusive) to the specified toIndex (exclusive) to the specified value.

size

open fun size(): Int

Returns the number of bits of space actually in use by this BitSet to represent bit values. The maximum element in the set is the size - 1st element.

stream

open fun stream(): IntStream!

Returns a stream of indices for which this BitSet contains a bit in the set state. The indices are returned in order, from lowest to highest. The size of the stream is the number of bits in the set state, equal to the value returned by the cardinality() method.

The stream binds to this bit set when the terminal stream operation commences (specifically, the spliterator for the stream is late-binding). If the bit set is modified during that operation then the result is undefined.

toByteArray

open fun toByteArray(): ByteArray!

Returns a new byte array containing all the bits in this bit set.

More precisely, if
byte[] bytes = s.toByteArray();
then bytes.length == (s.length()+7)/8 and
s.get(n) == ((bytes[n/8] & (1<<(n%8))) != 0)
for all n < 8 * bytes.length.

toLongArray

open fun toLongArray(): LongArray!

Returns a new long array containing all the bits in this bit set.

More precisely, if
long[] longs = s.toLongArray();
then longs.length == (s.length()+63)/64 and
s.get(n) == ((longs[n/64] & (1L<<(n%64))) != 0)
for all n < 64 * longs.length.

toString

open fun toString(): String

Returns a string representation of this bit set. For every index for which this BitSet contains a bit in the set state, the decimal representation of that index is included in the result. Such indices are listed in order from lowest to highest, separated by ", " (a comma and a space) and surrounded by braces, resulting in the usual mathematical notation for a set of integers.

Example:

BitSet drPepper = new BitSet();

drPepper.set(2);

drPepper.set(4);
  drPepper.set(10);

valueOf

open static fun valueOf(longs: LongArray!): BitSet!

Returns a new bit set containing all the bits in the given long array.

More precisely,
BitSet.valueOf(longs).get(n) == ((longs[n/64] & (1L<<(n%64))) != 0)
for all n < 64 * longs.length.

This method is equivalent to BitSet.valueOf(LongBuffer.wrap(longs)).

valueOf

open static fun valueOf(lb: LongBuffer!): BitSet!

Returns a new bit set containing all the bits in the given long buffer between its position and limit.

More precisely,
BitSet.valueOf(lb).get(n) == ((lb.get(lb.position()+n/64) & (1L<<(n%64))) != 0)
for all n < 64 * lb.remaining().

The long buffer is not modified by this method, and no reference to the buffer is retained by the bit set.

valueOf

open static fun valueOf(bytes: ByteArray!): BitSet!

Returns a new bit set containing all the bits in the given byte array.

More precisely,
BitSet.valueOf(bytes).get(n) == ((bytes[n/8] & (1<<(n%8))) != 0)
for all n < 8 * bytes.length.

This method is equivalent to BitSet.valueOf(ByteBuffer.wrap(bytes)).

valueOf

open static fun valueOf(bb: ByteBuffer!): BitSet!

Returns a new bit set containing all the bits in the given byte buffer between its position and limit.

More precisely,
BitSet.valueOf(bb).get(n) == ((bb.get(bb.position()+n/8) & (1<<(n%8))) != 0)
for all n < 8 * bb.remaining().

The byte buffer is not modified by this method, and no reference to the buffer is retained by the bit set.

xor

open fun xor(set: BitSet!): Unit

Performs a logical XOR of this bit set with the bit set argument. This bit set is modified so that a bit in it has the value true if and only if one of the following statements holds:

• The bit initially has the value true, and the corresponding bit in the argument has the value false.
• The bit initially has the value false, and the corresponding bit in the argument has the value true.