Added in API level 1

MediaPlayer


open class MediaPlayer : VolumeAutomation, AudioRouting
kotlin.Any
   ↳ android.media.MediaPlayer

MediaPlayer class can be used to control playback of audio/video files and streams.

MediaPlayer is not thread-safe. Creation of and all access to player instances should be on the same thread. If registering callbacks, the thread must have a Looper.

Topics covered here are:

  1. State Diagram
  2. Valid and Invalid States
  3. Permissions
  4. Register informational and error callbacks

State Diagram

Playback control of audio/video files and streams is managed as a state machine. The following diagram shows the life cycle and the states of a MediaPlayer object driven by the supported playback control operations. The ovals represent the states a MediaPlayer object may reside in. The arcs represent the playback control operations that drive the object state transition. There are two types of arcs. The arcs with a single arrow head represent synchronous method calls, while those with a double arrow head represent asynchronous method calls.

From this state diagram, one can see that a MediaPlayer object has the following states:

  • When a MediaPlayer object is just created using new or after reset() is called, it is in the Idle state; and after release() is called, it is in the End state. Between these two states is the life cycle of the MediaPlayer object.
    • There is a subtle but important difference between a newly constructed MediaPlayer object and the MediaPlayer object after reset() is called. It is a programming error to invoke methods such as getCurrentPosition(), getDuration(), getVideoHeight(), getVideoWidth(), setAudioAttributes(android.media.AudioAttributes), setLooping(boolean), setVolume(float,float), pause(), start(), stop(), seekTo(long,int), prepare() or prepareAsync() in the Idle state for both cases. If any of these methods is called right after a MediaPlayer object is constructed, the user supplied callback method OnErrorListener.onError() won't be called by the internal player engine and the object state remains unchanged; but if these methods are called right after reset(), the user supplied callback method OnErrorListener.onError() will be invoked by the internal player engine and the object will be transfered to the Error state.
    • You must keep a reference to a MediaPlayer instance to prevent it from being garbage collected. If a MediaPlayer instance is garbage collected, release will be called, causing any ongoing playback to stop.
    • You must call release() once you have finished using an instance to release acquired resources, such as memory and codecs. Once you have called release, you must no longer interact with the released instance.
    • MediaPlayer objects created using new is in the Idle state, while those created with one of the overloaded convenient create methods are NOT in the Idle state. In fact, the objects are in the Prepared state if the creation using create method is successful.
  • In general, some playback control operation may fail due to various reasons, such as unsupported audio/video format, poorly interleaved audio/video, resolution too high, streaming timeout, and the like. Thus, error reporting and recovery is an important concern under these circumstances. Sometimes, due to programming errors, invoking a playback control operation in an invalid state may also occur. Under all these error conditions, the internal player engine invokes a user supplied OnErrorListener.onError() method if an OnErrorListener has been registered beforehand via setOnErrorListener(android.media.MediaPlayer.OnErrorListener).
    • It is important to note that once an error occurs, the MediaPlayer object enters the Error state (except as noted above), even if an error listener has not been registered by the application.
    • In order to reuse a MediaPlayer object that is in the Error state and recover from the error, reset() can be called to restore the object to its Idle state.
    • It is good programming practice to have your application register a OnErrorListener to look out for error notifications from the internal player engine.
    • IllegalStateException is thrown to prevent programming errors such as calling prepare(), prepareAsync(), or one of the overloaded setDataSource methods in an invalid state.
  • Calling setDataSource(java.io.FileDescriptor), or setDataSource(java.lang.String), or setDataSource(android.content.Context,android.net.Uri), or setDataSource(java.io.FileDescriptor,long,long), or setDataSource(android.media.MediaDataSource) transfers a MediaPlayer object in the Idle state to the Initialized state.
    • An IllegalStateException is thrown if setDataSource() is called in any other state.
    • It is good programming practice to always look out for IllegalArgumentException and IOException that may be thrown from the overloaded setDataSource methods.
  • A MediaPlayer object must first enter the Prepared state before playback can be started.
    • There are two ways (synchronous vs. asynchronous) that the Prepared state can be reached: either a call to prepare() (synchronous) which transfers the object to the Prepared state once the method call returns, or a call to prepareAsync() (asynchronous) which first transfers the object to the Preparing state after the call returns (which occurs almost right away) while the internal player engine continues working on the rest of preparation work until the preparation work completes. When the preparation completes or when prepare() call returns, the internal player engine then calls a user supplied callback method, onPrepared() of the OnPreparedListener interface, if an OnPreparedListener is registered beforehand via setOnPreparedListener(android.media.MediaPlayer.OnPreparedListener).
    • It is important to note that the Preparing state is a transient state, and the behavior of calling any method with side effect while a MediaPlayer object is in the Preparing state is undefined.
    • An IllegalStateException is thrown if prepare() or prepareAsync() is called in any other state.
    • While in the Prepared state, properties such as audio/sound volume, screenOnWhilePlaying, looping can be adjusted by invoking the corresponding set methods.
  • To start the playback, start() must be called. After start() returns successfully, the MediaPlayer object is in the Started state. isPlaying() can be called to test whether the MediaPlayer object is in the Started state.
    • While in the Started state, the internal player engine calls a user supplied OnBufferingUpdateListener.onBufferingUpdate() callback method if a OnBufferingUpdateListener has been registered beforehand via setOnBufferingUpdateListener(android.media.MediaPlayer.OnBufferingUpdateListener). This callback allows applications to keep track of the buffering status while streaming audio/video.
    • Calling start() has no effect on a MediaPlayer object that is already in the Started state.
  • Playback can be paused and stopped, and the current playback position can be adjusted. Playback can be paused via pause(). When the call to pause() returns, the MediaPlayer object enters the Paused state. Note that the transition from the Started state to the Paused state and vice versa happens asynchronously in the player engine. It may take some time before the state is updated in calls to isPlaying(), and it can be a number of seconds in the case of streamed content.
    • Calling start() to resume playback for a paused MediaPlayer object, and the resumed playback position is the same as where it was paused. When the call to start() returns, the paused MediaPlayer object goes back to the Started state.
    • Calling pause() has no effect on a MediaPlayer object that is already in the Paused state.
  • Calling stop() stops playback and causes a MediaPlayer in the Started, Paused, Prepared or PlaybackCompleted state to enter the Stopped state.
    • Once in the Stopped state, playback cannot be started until prepare() or prepareAsync() are called to set the MediaPlayer object to the Prepared state again.
    • Calling stop() has no effect on a MediaPlayer object that is already in the Stopped state.
  • The playback position can be adjusted with a call to seekTo(long,int).
    • Although the asynchronuous seekTo(long,int) call returns right away, the actual seek operation may take a while to finish, especially for audio/video being streamed. When the actual seek operation completes, the internal player engine calls a user supplied OnSeekComplete.onSeekComplete() if an OnSeekCompleteListener has been registered beforehand via setOnSeekCompleteListener(android.media.MediaPlayer.OnSeekCompleteListener).
    • Please note that seekTo(long,int) can also be called in the other states, such as Prepared, Paused and PlaybackCompleted state. When seekTo(long,int) is called in those states, one video frame will be displayed if the stream has video and the requested position is valid.
    • Furthermore, the actual current playback position can be retrieved with a call to getCurrentPosition(), which is helpful for applications such as a Music player that need to keep track of the playback progress.
  • When the playback reaches the end of stream, the playback completes.
    • If the looping mode was being set to true with setLooping(boolean), the MediaPlayer object shall remain in the Started state.
    • If the looping mode was set to false , the player engine calls a user supplied callback method, OnCompletion.onCompletion(), if a OnCompletionListener is registered beforehand via setOnCompletionListener(android.media.MediaPlayer.OnCompletionListener). The invoke of the callback signals that the object is now in the PlaybackCompleted state.
    • While in the PlaybackCompleted state, calling start() can restart the playback from the beginning of the audio/video source.

    Valid and invalid states

    Method Name

    Valid States

    Invalid States

    Comments

    attachAuxEffect

    {Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted}

    {Idle, Error}

    This method must be called after setDataSource. Calling it does not change the object state.

    getAudioSessionId

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    getCurrentPosition

    {Idle, Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted}

    {Error}

    Successful invoke of this method in a valid state does not change the state. Calling this method in an invalid state transfers the object to the Error state.

    getDuration

    {Prepared, Started, Paused, Stopped, PlaybackCompleted}

    {Idle, Initialized, Error}

    Successful invoke of this method in a valid state does not change the state. Calling this method in an invalid state transfers the object to the Error state.

    getVideoHeight

    {Idle, Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted}

    {Error}

    Successful invoke of this method in a valid state does not change the state. Calling this method in an invalid state transfers the object to the Error state.

    getVideoWidth

    {Idle, Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted}

    {Error}

    Successful invoke of this method in a valid state does not change the state. Calling this method in an invalid state transfers the object to the Error state.

    isPlaying

    {Idle, Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted}

    {Error}

    Successful invoke of this method in a valid state does not change the state. Calling this method in an invalid state transfers the object to the Error state.

    pause

    {Started, Paused, PlaybackCompleted}

    {Idle, Initialized, Prepared, Stopped, Error}

    Successful invoke of this method in a valid state transfers the object to the Paused state. Calling this method in an invalid state transfers the object to the Error state.

    prepare

    {Initialized, Stopped}

    {Idle, Prepared, Started, Paused, PlaybackCompleted, Error}

    Successful invoke of this method in a valid state transfers the object to the Prepared state. Calling this method in an invalid state throws an IllegalStateException.

    prepareAsync

    {Initialized, Stopped}

    {Idle, Prepared, Started, Paused, PlaybackCompleted, Error}

    Successful invoke of this method in a valid state transfers the object to the Preparing state. Calling this method in an invalid state throws an IllegalStateException.

    release

    any

    {}

    After release(), you must not interact with the object.

    reset

    {Idle, Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted, Error}

    {}

    After reset(), the object is like being just created.

    seekTo

    {Prepared, Started, Paused, PlaybackCompleted}

    {Idle, Initialized, Stopped, Error}

    Successful invoke of this method in a valid state does not change the state. Calling this method in an invalid state transfers the object to the Error state.

    setAudioAttributes

    {Idle, Initialized, Stopped, Prepared, Started, Paused, PlaybackCompleted}

    {Error}

    Successful invoke of this method does not change the state. In order for the target audio attributes type to become effective, this method must be called before prepare() or prepareAsync().

    setAudioSessionId

    {Idle}

    {Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted, Error}

    This method must be called in idle state as the audio session ID must be known before calling setDataSource. Calling it does not change the object state.

    setAudioStreamType (deprecated)

    {Idle, Initialized, Stopped, Prepared, Started, Paused, PlaybackCompleted}

    {Error}

    Successful invoke of this method does not change the state. In order for the target audio stream type to become effective, this method must be called before prepare() or prepareAsync().

    setAuxEffectSendLevel

    any

    {}

    Calling this method does not change the object state.

    setDataSource

    {Idle}

    {Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted, Error}

    Successful invoke of this method in a valid state transfers the object to the Initialized state. Calling this method in an invalid state throws an IllegalStateException.

    setDisplay

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    setSurface

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    setVideoScalingMode

    {Initialized, Prepared, Started, Paused, Stopped, PlaybackCompleted}

    {Idle, Error}

    Successful invoke of this method does not change the state.

    setLooping

    {Idle, Initialized, Stopped, Prepared, Started, Paused, PlaybackCompleted}

    {Error}

    Successful invoke of this method in a valid state does not change the state. Calling this method in an invalid state transfers the object to the Error state.

    isLooping

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    setOnBufferingUpdateListener

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    setOnCompletionListener

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    setOnErrorListener

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    setOnPreparedListener

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    setOnSeekCompleteListener

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    setPlaybackParams

    {Initialized, Prepared, Started, Paused, PlaybackCompleted, Error}

    {Idle, Stopped}

    This method will change state in some cases, depending on when it's called.

    setScreenOnWhilePlaying any

    {}

    This method can be called in any state and calling it does not change the object state.

    setVolume

    {Idle, Initialized, Stopped, Prepared, Started, Paused, PlaybackCompleted}

    {Error}

    Successful invoke of this method does not change the state.
    setWakeMode

    any

    {}

    This method can be called in any state and calling it does not change the object state.

    start

    {Prepared, Started, Paused, PlaybackCompleted}

    {Idle, Initialized, Stopped, Error}

    Successful invoke of this method in a valid state transfers the object to the Started state. Calling this method in an invalid state transfers the object to the Error state.

    stop

    {Prepared, Started, Stopped, Paused, PlaybackCompleted}

    {Idle, Initialized, Error}

    Successful invoke of this method in a valid state transfers the object to the Stopped state. Calling this method in an invalid state transfers the object to the Error state.

    getTrackInfo

    {Prepared, Started, Stopped, Paused, PlaybackCompleted}

    {Idle, Initialized, Error}

    Successful invoke of this method does not change the state.

    addTimedTextSource

    {Prepared, Started, Stopped, Paused, PlaybackCompleted}

    {Idle, Initialized, Error}

    Successful invoke of this method does not change the state.

    selectTrack

    {Prepared, Started, Stopped, Paused, PlaybackCompleted}

    {Idle, Initialized, Error}

    Successful invoke of this method does not change the state.

    deselectTrack

    {Prepared, Started, Stopped, Paused, PlaybackCompleted}

    {Idle, Initialized, Error}

    Successful invoke of this method does not change the state.

    Permissions

    One may need to declare a corresponding WAKE_LOCK permission <uses-permission> element.

    This class requires the android.Manifest.permission#INTERNET permission when used with network-based content.

    Callbacks

    Applications may want to register for informational and error events in order to be informed of some internal state update and possible runtime errors during playback or streaming. Registration for these events is done by properly setting the appropriate listeners (via calls to setOnPreparedListener, setOnVideoSizeChangedListener, setOnSeekCompleteListener, setOnCompletionListener, setOnBufferingUpdateListener, setOnInfoListener, setOnErrorListener, etc). In order to receive the respective callback associated with these listeners, applications are required to create MediaPlayer objects on a thread with its own Looper running (main UI thread by default has a Looper running).

Summary

Nested classes

Encapsulates the DRM properties of the source.

Thrown when a DRM method is called before preparing a DRM scheme through prepareDrm().

abstract

Interface definition of a callback to be invoked indicating buffering status of a media resource being streamed over the network.

abstract

Interface definition for a callback to be invoked when playback of a media source has completed.

abstract

Interface definition of a callback to be invoked when the app can do DRM configuration (get/set properties) before the session is opened.

abstract

Interface definition of a callback to be invoked when the DRM info becomes available

abstract

Interface definition of a callback to notify the app when the DRM is ready for key request/response

abstract

Interface definition of a callback to be invoked when there has been an error during an asynchronous operation (other errors will throw exceptions at method call time).

abstract

Interface definition of a callback to be invoked to communicate some info and/or warning about the media or its playback.

abstract

Interface definition of a callback to be invoked when discontinuity in the normal progression of the media time is detected.

abstract

Interface definition for a callback to be invoked when the media source is ready for playback.

abstract

Interface definition of a callback to be invoked indicating the completion of a seek operation.

abstract

Interface definition of a callback to be invoked when a player subtitle track has new subtitle data available.

abstract

Interface definition of a callback to be invoked when a track has timed metadata available.

abstract

Interface definition of a callback to be invoked when a timed text is available for display.

abstract

Interface definition of a callback to be invoked when the video size is first known or updated

Thrown when the device requires DRM provisioning but the provisioning attempt has failed due to a network error (Internet reachability, timeout, etc.).

Thrown when the device requires DRM provisioning but the provisioning attempt has failed due to the provisioning server denying the request.

open

Class for MediaPlayer to return each audio/video/subtitle track's metadata.

Constants
static Int

File or network related operation errors.

static Int

Bitstream is not conforming to the related coding standard or file spec.

static Int

The video is streamed and its container is not valid for progressive playback i.

static Int

Media server died.

static Int

Some operation takes too long to complete, usually more than 3-5 seconds.

static Int

Unspecified media player error.

static Int

Bitstream is conforming to the related coding standard or file spec, but the media framework does not support the feature.

static Int

Informs that audio is not playing.

static Int

Bad interleaving means that a media has been improperly interleaved or not interleaved at all, e.

static Int

MediaPlayer is resuming playback after filling buffers.

static Int

MediaPlayer is temporarily pausing playback internally in order to buffer more data.

static Int

A new set of metadata is available.

static Int

The media cannot be seeked (e.g live stream)

static Int

The player was started because it was used as the next player for another player, which just completed playback.

static Int

Reading the subtitle track takes too long.

static Int

Unspecified media player info.

static Int

Subtitle track was not supported by the media framework.

static Int

Informs that video is not playing.

static Int

The player just pushed the very first video frame for rendering.

static Int

The video is too complex for the decoder: it can't decode frames fast enough.

static String

MIME type for SubRip (SRT) container.

static Int

The DRM preparation has failed .

static Int

The device required DRM provisioning but couldn't reach the provisioning server.

static Int

The device required DRM provisioning but the provisioning server denied the request.

static Int

The status codes for OnDrmPreparedListener#onDrmPrepared listener.

static Int

This mode is used with seekTo(long,int) to move media position to a frame (not necessarily a key frame) associated with a data source that is located closest to or at the given time.

static Int

This mode is used with seekTo(long,int) to move media position to a sync (or key) frame associated with a data source that is located closest to (in time) or at the given time.

static Int

This mode is used with seekTo(long,int) to move media position to a sync (or key) frame associated with a data source that is located right after or at the given time.

static Int

This mode is used with seekTo(long,int) to move media position to a sync (or key) frame associated with a data source that is located right before or at the given time.

static Int

Specifies a video scaling mode.

static Int

Specifies a video scaling mode.

Public constructors

Default constructor.

MediaPlayer(context: Context)

Default constructor with context.

Public methods
open Unit

Adds an AudioRouting.OnRoutingChangedListener to receive notifications of routing changes on this MediaPlayer.

open Unit
addTimedTextSource(path: String!, mimeType: String!)

Adds an external timed text source file.

open Unit
addTimedTextSource(context: Context!, uri: Uri!, mimeType: String!)

Adds an external timed text source file (Uri).

open Unit

Adds an external timed text source file (FileDescriptor).

open Unit
addTimedTextSource(fd: FileDescriptor!, offset: Long, length: Long, mime: String!)

Adds an external timed text file (FileDescriptor).

open Unit
attachAuxEffect(effectId: Int)

Attaches an auxiliary effect to the player.

open Unit

Clears the listener previously set with setOnMediaTimeDiscontinuityListener(android.media.MediaPlayer.OnMediaTimeDiscontinuityListener) or setOnMediaTimeDiscontinuityListener(android.media.MediaPlayer.OnMediaTimeDiscontinuityListener,android.os.Handler)

open Unit

Clears the listener previously set with setOnSubtitleDataListener(android.media.MediaPlayer.OnSubtitleDataListener) or setOnSubtitleDataListener(android.media.MediaPlayer.OnSubtitleDataListener,android.os.Handler).

open static MediaPlayer!
create(context: Context!, uri: Uri!)

Convenience method to create a MediaPlayer for a given Uri.

open static MediaPlayer!
create(context: Context!, uri: Uri!, holder: SurfaceHolder!)

Convenience method to create a MediaPlayer for a given Uri.

open static MediaPlayer!
create(context: Context!, uri: Uri!, holder: SurfaceHolder!, audioAttributes: AudioAttributes!, audioSessionId: Int)

Same factory method as create(android.content.Context,android.net.Uri,android.view.SurfaceHolder) but that lets you specify the audio attributes and session ID to be used by the new MediaPlayer instance.

open static MediaPlayer!
create(context: Context!, resid: Int)

Convenience method to create a MediaPlayer for a given resource id.

open static MediaPlayer!
create(context: Context!, resid: Int, audioAttributes: AudioAttributes!, audioSessionId: Int)

Same factory method as create(android.content.Context,int) but that lets you specify the audio attributes and session ID to be used by the new MediaPlayer instance.

open VolumeShaper

Returns a VolumeShaper object that can be used modify the volume envelope of the player or track.

open Unit

Deselect a track.

open Int

Returns the audio session ID.

open Int

Gets the current playback position.

open MediaPlayer.DrmInfo!

Retrieves the DRM Info associated with the current source

open String

Read a DRM engine plugin String property value, given the property name string.

open Int

Gets the duration of the file.

open MediaDrm.KeyRequest
getKeyRequest(keySetId: ByteArray?, initData: ByteArray?, mimeType: String?, keyType: Int, optionalParameters: MutableMap<String!, String!>?)

A key request/response exchange occurs between the app and a license server to obtain or release keys used to decrypt encrypted content.

open PersistableBundle!

Return Metrics data about the current player.

open PlaybackParams

Gets the playback params, containing the current playback rate.

open AudioDeviceInfo!

Returns the selected output specified by setPreferredDevice.

open AudioDeviceInfo!

Returns an AudioDeviceInfo identifying the current routing of this MediaPlayer Note: The query is only valid if the MediaPlayer is currently playing.

open Int
getSelectedTrack(trackType: Int)

Returns the index of the audio, video, or subtitle track currently selected for playback, The return value is an index into the array returned by getTrackInfo(), and can be used in calls to selectTrack(int) or deselectTrack(int).

open SyncParams

Gets the A/V sync mode.

open MediaTimestamp?

Get current playback position as a MediaTimestamp.

open Array<MediaPlayer.TrackInfo!>!

Returns an array of track information.

open Int

Returns the height of the video.

open Int

Returns the width of the video.

open Boolean

Checks whether the MediaPlayer is looping or non-looping.

open Boolean

Checks whether the MediaPlayer is playing.

open Unit

Pauses playback.

open Unit

Prepares the player for playback, synchronously.

open Unit

Prepares the player for playback, asynchronously.

open Unit

Prepares the DRM for the current source

open ByteArray!
provideKeyResponse(keySetId: ByteArray?, response: ByteArray)

A key response is received from the license server by the app, then it is provided to the DRM engine plugin using provideKeyResponse.

open Unit

Releases resources associated with this MediaPlayer object.

open Unit

Releases the DRM session

open Unit

Removes an AudioRouting.OnRoutingChangedListener which has been previously added to receive rerouting notifications.

open Unit

Resets the MediaPlayer to its uninitialized state.

open Unit

Restore persisted offline keys into a new session.

open Unit
seekTo(msec: Long, mode: Int)

Moves the media to specified time position by considering the given mode.

open Unit
seekTo(msec: Int)

Seeks to specified time position.

open Unit
selectTrack(index: Int)

Selects a track.

open Unit

Sets the audio attributes for this MediaPlayer.

open Unit
setAudioSessionId(sessionId: Int)

Sets the audio session ID.

open Unit
setAudioStreamType(streamtype: Int)

Sets the audio stream type for this MediaPlayer.

open Unit

Sets the send level of the player to the attached auxiliary effect.

open Unit
setDataSource(context: Context, uri: Uri)

Sets the data source as a content Uri.

open Unit
setDataSource(context: Context, uri: Uri, headers: MutableMap<String!, String!>?, cookies: MutableList<HttpCookie!>?)

Sets the data source as a content Uri.

open Unit
setDataSource(context: Context, uri: Uri, headers: MutableMap<String!, String!>?)

Sets the data source as a content Uri.

open Unit

Sets the data source (file-path or http/rtsp URL) to use.

open Unit

Sets the data source (AssetFileDescriptor) to use.

open Unit

Sets the data source (FileDescriptor) to use.

open Unit
setDataSource(fd: FileDescriptor!, offset: Long, length: Long)

Sets the data source (FileDescriptor) to use.

open Unit

Sets the data source (MediaDataSource) to use.

open Unit

Sets the SurfaceHolder to use for displaying the video portion of the media.

open Unit
setDrmPropertyString(propertyName: String, value: String)

Set a DRM engine plugin String property value.

open Unit
setLooping(looping: Boolean)

Sets the player to be looping or non-looping.

open Unit

Set the MediaPlayer to start when this MediaPlayer finishes playback (i.e. reaches the end of the stream).

open Unit

Register a callback to be invoked when the status of a network stream's buffer has changed.

open Unit

Register a callback to be invoked when the end of a media source has been reached during playback.

open Unit

Register a callback to be invoked for configuration of the DRM object before the session is created.

open Unit

Register a callback to be invoked when the DRM info is known.

open Unit

Register a callback to be invoked when the DRM info is known.

open Unit

Register a callback to be invoked when the DRM object is prepared.

open Unit

Register a callback to be invoked when the DRM object is prepared.

open Unit

Register a callback to be invoked when an error has happened during an asynchronous operation.

open Unit

Register a callback to be invoked when an info/warning is available.

open Unit

Sets the listener to be invoked when a media time discontinuity is encountered.

open Unit

Sets the listener to be invoked when a media time discontinuity is encountered.

open Unit

Register a callback to be invoked when the media source is ready for playback.

open Unit

Register a callback to be invoked when a seek operation has been completed.

open Unit

Sets the listener to be invoked when a subtitle track has new data available.

open Unit

Sets the listener to be invoked when a subtitle track has new data available.

open Unit

Register a callback to be invoked when a selected track has timed metadata available.

open Unit

Register a callback to be invoked when a timed text is available for display.

open Unit

Register a callback to be invoked when the video size is known or updated.

open Unit

Sets playback rate using PlaybackParams.

open Boolean

Specifies an audio device (via an AudioDeviceInfo object) to route the output from this MediaPlayer.

open Unit

Control whether we should use the attached SurfaceHolder to keep the screen on while video playback is occurring.

open Unit
setSurface(surface: Surface!)

Sets the Surface to be used as the sink for the video portion of the media.

open Unit

Sets A/V sync mode.

open Unit

Sets video scaling mode.

open Unit
setVolume(leftVolume: Float, rightVolume: Float)

Sets the volume on this player.

open Unit
setWakeMode(context: Context!, mode: Int)

Set the low-level power management behavior for this MediaPlayer.

open Unit

Starts or resumes playback.

open Unit

Stops playback after playback has been started or paused.

Protected methods
open Unit

Constants

MEDIA_ERROR_IO

Added in API level 17
static val MEDIA_ERROR_IO: Int

File or network related operation errors.

Value: -1004

MEDIA_ERROR_MALFORMED

Added in API level 17
static val MEDIA_ERROR_MALFORMED: Int

Bitstream is not conforming to the related coding standard or file spec.

Value: -1007

MEDIA_ERROR_NOT_VALID_FOR_PROGRESSIVE_PLAYBACK

Added in API level 3
static val MEDIA_ERROR_NOT_VALID_FOR_PROGRESSIVE_PLAYBACK: Int

The video is streamed and its container is not valid for progressive playback i.e the video's index (e.g moov atom) is not at the start of the file.

Value: 200

MEDIA_ERROR_SERVER_DIED

Added in API level 1
static val MEDIA_ERROR_SERVER_DIED: Int

Media server died. In this case, the application must release the MediaPlayer object and instantiate a new one.

Value: 100

MEDIA_ERROR_TIMED_OUT

Added in API level 17
static val MEDIA_ERROR_TIMED_OUT: Int

Some operation takes too long to complete, usually more than 3-5 seconds.

Value: -110

MEDIA_ERROR_UNKNOWN

Added in API level 1
static val MEDIA_ERROR_UNKNOWN: Int

Unspecified media player error.

Value: 1

MEDIA_ERROR_UNSUPPORTED

Added in API level 17
static val MEDIA_ERROR_UNSUPPORTED: Int

Bitstream is conforming to the related coding standard or file spec, but the media framework does not support the feature.

Value: -1010

MEDIA_INFO_AUDIO_NOT_PLAYING

Added in API level 26
static val MEDIA_INFO_AUDIO_NOT_PLAYING: Int

Informs that audio is not playing. Note that playback of the video is not interrupted.

Value: 804

MEDIA_INFO_BAD_INTERLEAVING

Added in API level 3
static val MEDIA_INFO_BAD_INTERLEAVING: Int

Bad interleaving means that a media has been improperly interleaved or not interleaved at all, e.g has all the video samples first then all the audio ones. Video is playing but a lot of disk seeks may be happening.

Value: 800

MEDIA_INFO_BUFFERING_END

Added in API level 9
static val MEDIA_INFO_BUFFERING_END: Int

MediaPlayer is resuming playback after filling buffers.

Value: 702

MEDIA_INFO_BUFFERING_START

Added in API level 9
static val MEDIA_INFO_BUFFERING_START: Int

MediaPlayer is temporarily pausing playback internally in order to buffer more data.

Value: 701

MEDIA_INFO_METADATA_UPDATE

Added in API level 5
static val MEDIA_INFO_METADATA_UPDATE: Int

A new set of metadata is available.

Value: 802

MEDIA_INFO_NOT_SEEKABLE

Added in API level 3
static val MEDIA_INFO_NOT_SEEKABLE: Int

The media cannot be seeked (e.g live stream)

Value: 801

MEDIA_INFO_STARTED_AS_NEXT

Added in API level 28
static val MEDIA_INFO_STARTED_AS_NEXT: Int

The player was started because it was used as the next player for another player, which just completed playback.

Value: 2

MEDIA_INFO_SUBTITLE_TIMED_OUT

Added in API level 19
static val MEDIA_INFO_SUBTITLE_TIMED_OUT: Int

Reading the subtitle track takes too long.

Value: 902

MEDIA_INFO_UNKNOWN

Added in API level 3
static val MEDIA_INFO_UNKNOWN: Int

Unspecified media player info.

Value: 1

MEDIA_INFO_UNSUPPORTED_SUBTITLE

Added in API level 19
static val MEDIA_INFO_UNSUPPORTED_SUBTITLE: Int

Subtitle track was not supported by the media framework.

Value: 901

MEDIA_INFO_VIDEO_NOT_PLAYING

Added in API level 26
static val MEDIA_INFO_VIDEO_NOT_PLAYING: Int

Informs that video is not playing. Note that playback of the audio is not interrupted.

Value: 805

MEDIA_INFO_VIDEO_RENDERING_START

Added in API level 17
static val MEDIA_INFO_VIDEO_RENDERING_START: Int

The player just pushed the very first video frame for rendering.

Value: 3

MEDIA_INFO_VIDEO_TRACK_LAGGING

Added in API level 3
static val MEDIA_INFO_VIDEO_TRACK_LAGGING: Int

The video is too complex for the decoder: it can't decode frames fast enough. Possibly only the audio plays fine at this stage.

Value: 700

MEDIA_MIMETYPE_TEXT_SUBRIP

Added in API level 16
Deprecated in API level 28
static val MEDIA_MIMETYPE_TEXT_SUBRIP: String

Deprecated: use MediaFormat#MIMETYPE_TEXT_SUBRIP

MIME type for SubRip (SRT) container. Used in addTimedTextSource APIs.

Value: "application/x-subrip"

PREPARE_DRM_STATUS_PREPARATION_ERROR

Added in API level 26
static val PREPARE_DRM_STATUS_PREPARATION_ERROR: Int

The DRM preparation has failed .

Value: 3

PREPARE_DRM_STATUS_PROVISIONING_NETWORK_ERROR

Added in API level 26
static val PREPARE_DRM_STATUS_PROVISIONING_NETWORK_ERROR: Int

The device required DRM provisioning but couldn't reach the provisioning server.

Value: 1

PREPARE_DRM_STATUS_PROVISIONING_SERVER_ERROR

Added in API level 26
static val PREPARE_DRM_STATUS_PROVISIONING_SERVER_ERROR: Int

The device required DRM provisioning but the provisioning server denied the request.

Value: 2

PREPARE_DRM_STATUS_SUCCESS

Added in API level 26
static val PREPARE_DRM_STATUS_SUCCESS: Int

The status codes for OnDrmPreparedListener#onDrmPrepared listener.

DRM preparation has succeeded.

Value: 0

SEEK_CLOSEST

Added in API level 26
static val SEEK_CLOSEST: Int

This mode is used with seekTo(long,int) to move media position to a frame (not necessarily a key frame) associated with a data source that is located closest to or at the given time.

Value: 3

SEEK_CLOSEST_SYNC

Added in API level 26
static val SEEK_CLOSEST_SYNC: Int

This mode is used with seekTo(long,int) to move media position to a sync (or key) frame associated with a data source that is located closest to (in time) or at the given time.

Value: 2

SEEK_NEXT_SYNC

Added in API level 26
static val SEEK_NEXT_SYNC: Int

This mode is used with seekTo(long,int) to move media position to a sync (or key) frame associated with a data source that is located right after or at the given time.

Value: 1

SEEK_PREVIOUS_SYNC

Added in API level 26
static val SEEK_PREVIOUS_SYNC: Int

This mode is used with seekTo(long,int) to move media position to a sync (or key) frame associated with a data source that is located right before or at the given time.

Value: 0

VIDEO_SCALING_MODE_SCALE_TO_FIT

Added in API level 16
static val VIDEO_SCALING_MODE_SCALE_TO_FIT: Int

Specifies a video scaling mode. The content is stretched to the surface rendering area. When the surface has the same aspect ratio as the content, the aspect ratio of the content is maintained; otherwise, the aspect ratio of the content is not maintained when video is being rendered. Unlike VIDEO_SCALING_MODE_SCALE_TO_FIT_WITH_CROPPING, there is no content cropping with this video scaling mode.

Value: 1

VIDEO_SCALING_MODE_SCALE_TO_FIT_WITH_CROPPING

Added in API level 16
static val VIDEO_SCALING_MODE_SCALE_TO_FIT_WITH_CROPPING: Int

Specifies a video scaling mode. The content is scaled, maintaining its aspect ratio. The whole surface area is always used. When the aspect ratio of the content is the same as the surface, no content is cropped; otherwise, content is cropped to fit the surface.

Value: 2

Public constructors

MediaPlayer

Added in API level 1
MediaPlayer()

Default constructor.

Consider using one of the create() methods for synchronously instantiating a MediaPlayer from a Uri or resource.

You must call release() when you are finished using the instantiated instance. Doing so frees any resources you have previously acquired.

MediaPlayer

Added in API level 34
MediaPlayer(context: Context)

Default constructor with context.

Consider using one of the create() methods for synchronously instantiating a MediaPlayer from a Uri or resource.

Parameters
context Context: non-null context. This context will be used to pull information, such as android.content.AttributionSource and device specific session ids, which will be associated with the MediaPlayer. However, the context itself will not be retained by the MediaPlayer.

Public methods

addOnRoutingChangedListener

Added in API level 28
open fun addOnRoutingChangedListener(
    listener: AudioRouting.OnRoutingChangedListener!,
    handler: Handler!
): Unit

Adds an AudioRouting.OnRoutingChangedListener to receive notifications of routing changes on this MediaPlayer.

Parameters
listener AudioRouting.OnRoutingChangedListener!: The AudioRouting.OnRoutingChangedListener interface to receive notifications of rerouting events.
handler Handler!: Specifies the Handler object for the thread on which to execute the callback. If null, the handler on the main looper will be used.

addTimedTextSource

Added in API level 16
open fun addTimedTextSource(
    path: String!,
    mimeType: String!
): Unit

Adds an external timed text source file. Currently supported format is SubRip with the file extension .srt, case insensitive. Note that a single external timed text source may contain multiple tracks in it. One can find the total number of available tracks using getTrackInfo() to see what additional tracks become available after this method call.

Parameters
path String!: The file path of external timed text source file.
mimeType String!: The mime type of the file. Must be one of the mime types listed above.
Exceptions
java.io.IOException if the file cannot be accessed or is corrupted.
java.lang.IllegalArgumentException if the mimeType is not supported.
java.lang.IllegalStateException if called in an invalid state.

addTimedTextSource

Added in API level 16
open fun addTimedTextSource(
    context: Context!,
    uri: Uri!,
    mimeType: String!
): Unit

Adds an external timed text source file (Uri). Currently supported format is SubRip with the file extension .srt, case insensitive. Note that a single external timed text source may contain multiple tracks in it. One can find the total number of available tracks using getTrackInfo() to see what additional tracks become available after this method call.

Parameters
context Context!: the Context to use when resolving the Uri
uri Uri!: the Content URI of the data you want to play
mimeType String!: The mime type of the file. Must be one of the mime types listed above.
Exceptions
java.io.IOException if the file cannot be accessed or is corrupted.
java.lang.IllegalArgumentException if the mimeType is not supported.
java.lang.IllegalStateException if called in an invalid state.

addTimedTextSource

Added in API level 16
open fun addTimedTextSource(
    fd: FileDescriptor!,
    mimeType: String!
): Unit

Adds an external timed text source file (FileDescriptor). It is the caller's responsibility to close the file descriptor. It is safe to do so as soon as this call returns. Currently supported format is SubRip. Note that a single external timed text source may contain multiple tracks in it. One can find the total number of available tracks using getTrackInfo() to see what additional tracks become available after this method call.

Parameters
fd FileDescriptor!: the FileDescriptor for the file you want to play
mimeType String!: The mime type of the file. Must be one of the mime types listed above.
Exceptions
java.lang.IllegalArgumentException if the mimeType is not supported.
java.lang.IllegalStateException if called in an invalid state.

addTimedTextSource

Added in API level 16
open fun addTimedTextSource(
    fd: FileDescriptor!,
    offset: Long,
    length: Long,
    mime: String!
): Unit

Adds an external timed text file (FileDescriptor). It is the caller's responsibility to close the file descriptor. It is safe to do so as soon as this call returns. Currently supported format is SubRip. Note that a single external timed text source may contain multiple tracks in it. One can find the total number of available tracks using getTrackInfo() to see what additional tracks become available after this method call.

Parameters
fd FileDescriptor!: the FileDescriptor for the file you want to play
offset Long: the offset into the file where the data to be played starts, in bytes
length Long: the length in bytes of the data to be played
mime String!: The mime type of the file. Must be one of the mime types listed above.
Exceptions
java.lang.IllegalArgumentException if the mimeType is not supported.
java.lang.IllegalStateException if called in an invalid state.

attachAuxEffect

Added in API level 9
open fun attachAuxEffect(effectId: Int): Unit

Attaches an auxiliary effect to the player. A typical auxiliary effect is a reverberation effect which can be applied on any sound source that directs a certain amount of its energy to this effect. This amount is defined by setAuxEffectSendLevel(). See setAuxEffectSendLevel(float).

After creating an auxiliary effect (e.g. android.media.audiofx.EnvironmentalReverb), retrieve its ID with android.media.audiofx.AudioEffect#getId() and use it when calling this method to attach the player to the effect.

To detach the effect from the player, call this method with a null effect id.

This method must be called after one of the overloaded setDataSource methods.

Parameters
effectId Int: system wide unique id of the effect to attach

clearOnSubtitleDataListener

Added in API level 28
open fun clearOnSubtitleDataListener(): Unit

Clears the listener previously set with setOnSubtitleDataListener(android.media.MediaPlayer.OnSubtitleDataListener) or setOnSubtitleDataListener(android.media.MediaPlayer.OnSubtitleDataListener,android.os.Handler).

create

Added in API level 1
open static fun create(
    context: Context!,
    uri: Uri!
): MediaPlayer!

Convenience method to create a MediaPlayer for a given Uri. On success, prepare() will already have been called and must not be called again.

You must call release() when you are finished using the created instance. Doing so frees any resources you have previously acquired.

Note that since prepare() is called automatically in this method, you cannot change the audio session ID (see setAudioSessionId(int)) or audio attributes (see setAudioAttributes(android.media.AudioAttributes) of the new MediaPlayer.

Parameters
context Context!: the Context to use
uri Uri!: the Uri from which to get the datasource
Return
MediaPlayer! a MediaPlayer object, or null if creation failed

create

Added in API level 1
open static fun create(
    context: Context!,
    uri: Uri!,
    holder: SurfaceHolder!
): MediaPlayer!

Convenience method to create a MediaPlayer for a given Uri. On success, prepare() will already have been called and must not be called again.

You must call release() when you are finished using the created instance. Doing so frees any resources you have previously acquired.

Note that since prepare() is called automatically in this method, you cannot change the audio session ID (see setAudioSessionId(int)) or audio attributes (see setAudioAttributes(android.media.AudioAttributes) of the new MediaPlayer.

Parameters
context Context!: the Context to use
uri Uri!: the Uri from which to get the datasource
holder SurfaceHolder!: the SurfaceHolder to use for displaying the video
Return
MediaPlayer! a MediaPlayer object, or null if creation failed

create

Added in API level 21
open static fun create(
    context: Context!,
    uri: Uri!,
    holder: SurfaceHolder!,
    audioAttributes: AudioAttributes!,
    audioSessionId: Int
): MediaPlayer!

Same factory method as create(android.content.Context,android.net.Uri,android.view.SurfaceHolder) but that lets you specify the audio attributes and session ID to be used by the new MediaPlayer instance.

Parameters
context Context!: the Context to use
uri Uri!: the Uri from which to get the datasource
holder SurfaceHolder!: the SurfaceHolder to use for displaying the video, may be null.
audioAttributes AudioAttributes!: the AudioAttributes to be used by the media player.
audioSessionId Int: the audio session ID to be used by the media player, see AudioManager#generateAudioSessionId() to obtain a new session.
Return
MediaPlayer! a MediaPlayer object, or null if creation failed

create

Added in API level 1
open static fun create(
    context: Context!,
    resid: Int
): MediaPlayer!

Convenience method to create a MediaPlayer for a given resource id. On success, prepare() will already have been called and must not be called again.

You must call release() when you are finished using the created instance. Doing so frees any resources you have previously acquired.

Note that since prepare() is called automatically in this method, you cannot change the audio session ID (see setAudioSessionId(int)) or audio attributes (see setAudioAttributes(android.media.AudioAttributes) of the new MediaPlayer.

Parameters
context Context!: the Context to use
resid Int: the raw resource id (R.raw.<something>) for the resource to use as the datasource
Return
MediaPlayer! a MediaPlayer object, or null if creation failed

create

Added in API level 21
open static fun create(
    context: Context!,
    resid: Int,
    audioAttributes: AudioAttributes!,
    audioSessionId: Int
): MediaPlayer!

Same factory method as create(android.content.Context,int) but that lets you specify the audio attributes and session ID to be used by the new MediaPlayer instance.

Parameters
context Context!: the Context to use
resid Int: the raw resource id (R.raw.<something>) for the resource to use as the datasource
audioAttributes AudioAttributes!: the AudioAttributes to be used by the media player.
audioSessionId Int: the audio session ID to be used by the media player, see AudioManager#generateAudioSessionId() to obtain a new session.
Return
MediaPlayer! a MediaPlayer object, or null if creation failed

createVolumeShaper

Added in API level 26
open fun createVolumeShaper(configuration: VolumeShaper.Configuration): VolumeShaper

Returns a VolumeShaper object that can be used modify the volume envelope of the player or track.

Parameters
configuration VolumeShaper.Configuration: This value cannot be null.
Return
VolumeShaper This value cannot be null.
Exceptions
java.lang.IllegalArgumentException if the configuration is not allowed by the player.
java.lang.IllegalStateException if too many VolumeShapers are requested or the state of the player does not permit its creation (e.g. player is released).

deselectTrack

Added in API level 16
open fun deselectTrack(index: Int): Unit

Deselect a track.

Currently, the track must be a timed text track and no audio or video tracks can be deselected. If the timed text track identified by index has not been selected before, it throws an exception.

Parameters
index Int: the index of the track to be deselected. The valid range of the index is 0..total number of tracks - 1. The total number of tracks as well as the type of each individual track can be found by calling getTrackInfo() method.
Exceptions
java.lang.IllegalStateException if called in an invalid state.

getAudioSessionId

Added in API level 9
open fun getAudioSessionId(): Int

Returns the audio session ID.

Return
Int the audio session ID. {@see #setAudioSessionId(int)} Note that the audio session ID is 0 only if a problem occured when the MediaPlayer was contructed.

getCurrentPosition

Added in API level 1
open fun getCurrentPosition(): Int

Gets the current playback position.

Return
Int the current position in milliseconds

getDrmInfo

Added in API level 26
open fun getDrmInfo(): MediaPlayer.DrmInfo!

Retrieves the DRM Info associated with the current source

Exceptions
java.lang.IllegalStateException if called before prepare()

getDrmPropertyString

Added in API level 26
open fun getDrmPropertyString(propertyName: String): String

Read a DRM engine plugin String property value, given the property name string.

Parameters
propertyName String: the property name Standard fields names are: MediaDrm#PROPERTY_VENDOR, MediaDrm#PROPERTY_VERSION, MediaDrm#PROPERTY_DESCRIPTION, MediaDrm#PROPERTY_ALGORITHMS This value cannot be null. Value is android.media.MediaDrm#PROPERTY_VENDOR, android.media.MediaDrm#PROPERTY_VERSION, android.media.MediaDrm#PROPERTY_DESCRIPTION, or android.media.MediaDrm#PROPERTY_ALGORITHMS
Return
String This value cannot be null.

getDuration

Added in API level 1
open fun getDuration(): Int

Gets the duration of the file.

Return
Int the duration in milliseconds, if no duration is available (for example, if streaming live content), -1 is returned.

getKeyRequest

Added in API level 26
open fun getKeyRequest(
    keySetId: ByteArray?,
    initData: ByteArray?,
    mimeType: String?,
    keyType: Int,
    optionalParameters: MutableMap<String!, String!>?
): MediaDrm.KeyRequest

A key request/response exchange occurs between the app and a license server to obtain or release keys used to decrypt encrypted content.

getKeyRequest() is used to obtain an opaque key request byte array that is delivered to the license server. The opaque key request byte array is returned in KeyRequest.data. The recommended URL to deliver the key request to is returned in KeyRequest.defaultUrl.

After the app has received the key request response from the server, it should deliver to the response to the DRM engine plugin using the method provideKeyResponse.

Parameters
keySetId ByteArray?: is the key-set identifier of the offline keys being released when keyType is MediaDrm#KEY_TYPE_RELEASE. It should be set to null for other key requests, when keyType is MediaDrm#KEY_TYPE_STREAMING or MediaDrm#KEY_TYPE_OFFLINE.
initData ByteArray?: is the container-specific initialization data when the keyType is MediaDrm#KEY_TYPE_STREAMING or MediaDrm#KEY_TYPE_OFFLINE. Its meaning is interpreted based on the mime type provided in the mimeType parameter. It could contain, for example, the content ID, key ID or other data obtained from the content metadata that is required in generating the key request. When the keyType is MediaDrm#KEY_TYPE_RELEASE, it should be set to null.
mimeType String?: identifies the mime type of the content This value may be null.
keyType Int: specifies the type of the request. The request may be to acquire keys for streaming, MediaDrm#KEY_TYPE_STREAMING, or for offline content MediaDrm#KEY_TYPE_OFFLINE, or to release previously acquired keys (MediaDrm#KEY_TYPE_RELEASE), which are identified by a keySetId. Value is android.media.MediaDrm#KEY_TYPE_STREAMING, android.media.MediaDrm#KEY_TYPE_OFFLINE, or android.media.MediaDrm#KEY_TYPE_RELEASE
optionalParameters MutableMap<String!, String!>?: are included in the key request message to allow a client application to provide additional message parameters to the server. This may be null if no additional parameters are to be sent.
Return
MediaDrm.KeyRequest This value cannot be null.
Exceptions
android.media.MediaPlayer.NoDrmSchemeException if there is no active DRM session

getMetrics

Added in API level 26
open fun getMetrics(): PersistableBundle!

Return Metrics data about the current player.

Return
PersistableBundle! a PersistableBundle containing the set of attributes and values available for the media being handled by this instance of MediaPlayer The attributes are descibed in MetricsConstants. Additional vendor-specific fields may also be present in the return value.

getPlaybackParams

Added in API level 23
open fun getPlaybackParams(): PlaybackParams

Gets the playback params, containing the current playback rate.

Return
PlaybackParams the playback params. This value cannot be null.
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized.

getPreferredDevice

Added in API level 28
open fun getPreferredDevice(): AudioDeviceInfo!

Returns the selected output specified by setPreferredDevice. Note that this is not guaranteed to correspond to the actual device being used for playback.

getRoutedDevice

Added in API level 28
open fun getRoutedDevice(): AudioDeviceInfo!

Returns an AudioDeviceInfo identifying the current routing of this MediaPlayer Note: The query is only valid if the MediaPlayer is currently playing. If the player is not playing, the returned device can be null or correspond to previously selected device when the player was last active.

getSelectedTrack

Added in API level 21
open fun getSelectedTrack(trackType: Int): Int

Returns the index of the audio, video, or subtitle track currently selected for playback, The return value is an index into the array returned by getTrackInfo(), and can be used in calls to selectTrack(int) or deselectTrack(int).

Parameters
trackType Int: should be one of TrackInfo#MEDIA_TRACK_TYPE_VIDEO, TrackInfo#MEDIA_TRACK_TYPE_AUDIO, or TrackInfo#MEDIA_TRACK_TYPE_SUBTITLE
Return
Int index of the audio, video, or subtitle track currently selected for playback; a negative integer is returned when there is no selected track for trackType or when trackType is not one of audio, video, or subtitle.
Exceptions
java.lang.IllegalStateException if called after release()

getSyncParams

Added in API level 23
open fun getSyncParams(): SyncParams

Gets the A/V sync mode.

Return
SyncParams the A/V sync params This value cannot be null.
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized.

getTimestamp

Added in API level 23
open fun getTimestamp(): MediaTimestamp?

Get current playback position as a MediaTimestamp.

The MediaTimestamp represents how the media time correlates to the system time in a linear fashion using an anchor and a clock rate. During regular playback, the media time moves fairly constantly (though the anchor frame may be rebased to a current system time, the linear correlation stays steady). Therefore, this method does not need to be called often.

To help users get current playback position, this method always anchors the timestamp to the current system time, so MediaTimestamp#getAnchorMediaTimeUs can be used as current playback position.

Return
MediaTimestamp? a MediaTimestamp object if a timestamp is available, or null if no timestamp is available, e.g. because the media player has not been initialized.

getTrackInfo

Added in API level 16
open fun getTrackInfo(): Array<MediaPlayer.TrackInfo!>!

Returns an array of track information.

Return
Array<MediaPlayer.TrackInfo!>! Array of track info. The total number of tracks is the array length. Must be called again if an external timed text source has been added after any of the addTimedTextSource methods are called.
Exceptions
java.lang.IllegalStateException if it is called in an invalid state.

getVideoHeight

Added in API level 1
open fun getVideoHeight(): Int

Returns the height of the video.

Return
Int the height of the video, or 0 if there is no video, no display surface was set, or the height has not been determined yet. The OnVideoSizeChangedListener can be registered via setOnVideoSizeChangedListener(android.media.MediaPlayer.OnVideoSizeChangedListener) to provide a notification when the height is available.

getVideoWidth

Added in API level 1
open fun getVideoWidth(): Int

Returns the width of the video.

Return
Int the width of the video, or 0 if there is no video, no display surface was set, or the width has not been determined yet. The OnVideoSizeChangedListener can be registered via setOnVideoSizeChangedListener(android.media.MediaPlayer.OnVideoSizeChangedListener) to provide a notification when the width is available.

isLooping

Added in API level 3
open fun isLooping(): Boolean

Checks whether the MediaPlayer is looping or non-looping.

Return
Boolean true if the MediaPlayer is currently looping, false otherwise

isPlaying

Added in API level 1
open fun isPlaying(): Boolean

Checks whether the MediaPlayer is playing.

Return
Boolean true if currently playing, false otherwise
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized or has been released.

pause

Added in API level 1
open fun pause(): Unit

Pauses playback. Call start() to resume.

Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized.

prepare

Added in API level 1
open fun prepare(): Unit

Prepares the player for playback, synchronously. After setting the datasource and the display surface, you need to either call prepare() or prepareAsync(). For files, it is OK to call prepare(), which blocks until MediaPlayer is ready for playback.

Exceptions
java.lang.IllegalStateException if it is called in an invalid state

prepareAsync

Added in API level 1
open fun prepareAsync(): Unit

Prepares the player for playback, asynchronously. After setting the datasource and the display surface, you need to either call prepare() or prepareAsync(). For streams, you should call prepareAsync(), which returns immediately, rather than blocking until enough data has been buffered.

Exceptions
java.lang.IllegalStateException if it is called in an invalid state

prepareDrm

Added in API level 26
open fun prepareDrm(uuid: UUID): Unit

Prepares the DRM for the current source

If OnDrmConfigHelper is registered, it will be called during preparation to allow configuration of the DRM properties before opening the DRM session. Note that the callback is called synchronously in the thread that called prepareDrm. It should be used only for a series of getDrmPropertyString and setDrmPropertyString calls and refrain from any lengthy operation.

If the device has not been provisioned before, this call also provisions the device which involves accessing the provisioning server and can take a variable time to complete depending on the network connectivity. If OnDrmPreparedListener is registered, prepareDrm() runs in non-blocking mode by launching the provisioning in the background and returning. The listener will be called when provisioning and preparation has finished. If a OnDrmPreparedListener is not registered, prepareDrm() waits till provisioning and preparation has finished, i.e., runs in blocking mode.

If OnDrmPreparedListener is registered, it is called to indicate the DRM session being ready. The application should not make any assumption about its call sequence (e.g., before or after prepareDrm returns), or the thread context that will execute the listener (unless the listener is registered with a handler thread).

Parameters
uuid UUID: The UUID of the crypto scheme. If not known beforehand, it can be retrieved from the source through getDrmInfo or registering a onDrmInfoListener. This value cannot be null.
Exceptions
java.lang.IllegalStateException if called before prepare(), or the DRM was prepared already
android.media.UnsupportedSchemeException if the crypto scheme is not supported
android.media.ResourceBusyException if required DRM resources are in use
android.media.MediaPlayer.ProvisioningNetworkErrorException if provisioning is required but failed due to a network error
android.media.MediaPlayer.ProvisioningServerErrorException if provisioning is required but failed due to the request denied by the provisioning server

provideKeyResponse

open fun provideKeyResponse(
    keySetId: ByteArray?,
    response: ByteArray
): ByteArray!

A key response is received from the license server by the app, then it is provided to the DRM engine plugin using provideKeyResponse. When the response is for an offline key request, a key-set identifier is returned that can be used to later restore the keys to a new session with the method {@ link # restoreKeys}. * When the response is for a streaming or release request, null is returned. * * @param keySetId When the response is for a release request, keySetId identifies * the saved key associated with the release request (i.e., the same keySetId * passed to the earlier {@ link # getKeyRequest} call. It MUST be null when the * response is for either streaming or offline key requests. * * @param response the byte array response from the server * * @throws NoDrmSchemeException if there is no active DRM session * @throws DeniedByServerException if the response indicates that the * server rejected the request * @param keySetId This value may be {@code null}. * @param response This value cannot be {@code null}. * @apiSince 26

release

Added in API level 1
open fun release(): Unit

Releases resources associated with this MediaPlayer object.

You must call this method once the instance is no longer required.

releaseDrm

Added in API level 26
open fun releaseDrm(): Unit

Releases the DRM session

The player has to have an active DRM session and be in stopped, or prepared state before this call is made. A reset() call will release the DRM session implicitly.

Exceptions
android.media.MediaPlayer.NoDrmSchemeException if there is no active DRM session to release

removeOnRoutingChangedListener

Added in API level 28
open fun removeOnRoutingChangedListener(listener: AudioRouting.OnRoutingChangedListener!): Unit

Removes an AudioRouting.OnRoutingChangedListener which has been previously added to receive rerouting notifications.

Parameters
listener AudioRouting.OnRoutingChangedListener!: The previously added AudioRouting.OnRoutingChangedListener interface to remove.

reset

Added in API level 1
open fun reset(): Unit

Resets the MediaPlayer to its uninitialized state. After calling this method, you will have to initialize it again by setting the data source and calling prepare().

restoreKeys

Added in API level 26
open fun restoreKeys(keySetId: ByteArray): Unit

Restore persisted offline keys into a new session. keySetId identifies the keys to load, obtained from a prior call to provideKeyResponse.

Parameters
keySetId ByteArray: identifies the saved key set to restore This value cannot be null.

seekTo

Added in API level 26
open fun seekTo(
    msec: Long,
    mode: Int
): Unit

Moves the media to specified time position by considering the given mode.

When seekTo is finished, the user will be notified via OnSeekComplete supplied by the user. There is at most one active seekTo processed at any time. If there is a to-be-completed seekTo, new seekTo requests will be queued in such a way that only the last request is kept. When current seekTo is completed, the queued request will be processed if that request is different from just-finished seekTo operation, i.e., the requested position or mode is different.

Parameters
msec Long: the offset in milliseconds from the start to seek to. When seeking to the given time position, there is no guarantee that the data source has a frame located at the position. When this happens, a frame nearby will be rendered. If msec is negative, time position zero will be used. If msec is larger than duration, duration will be used.
mode Int: the mode indicating where exactly to seek to. Use SEEK_PREVIOUS_SYNC if one wants to seek to a sync frame that has a timestamp earlier than or the same as msec. Use SEEK_NEXT_SYNC if one wants to seek to a sync frame that has a timestamp later than or the same as msec. Use SEEK_CLOSEST_SYNC if one wants to seek to a sync frame that has a timestamp closest to or the same as msec. Use SEEK_CLOSEST if one wants to seek to a frame that may or may not be a sync frame but is closest to or the same as msec. SEEK_CLOSEST often has larger performance overhead compared to the other options if there is no sync frame located at msec. Value is android.media.MediaPlayer#SEEK_PREVIOUS_SYNC, android.media.MediaPlayer#SEEK_NEXT_SYNC, android.media.MediaPlayer#SEEK_CLOSEST_SYNC, or android.media.MediaPlayer#SEEK_CLOSEST
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized
java.lang.IllegalArgumentException if the mode is invalid.

seekTo

Added in API level 1
open fun seekTo(msec: Int): Unit

Seeks to specified time position. Same as seekTo(long,int) with mode = SEEK_PREVIOUS_SYNC.

Parameters
msec Int: the offset in milliseconds from the start to seek to
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized

selectTrack

Added in API level 16
open fun selectTrack(index: Int): Unit

Selects a track.

If a MediaPlayer is in invalid state, it throws an IllegalStateException exception. If a MediaPlayer is in Started state, the selected track is presented immediately. If a MediaPlayer is not in Started state, it just marks the track to be played.

In any valid state, if it is called multiple times on the same type of track (ie. Video, Audio, Timed Text), the most recent one will be chosen.

The first audio and video tracks are selected by default if available, even though this method is not called. However, no timed text track will be selected until this function is called.

Currently, only timed text, subtitle or audio tracks can be selected via this method. In addition, the support for selecting an audio track at runtime is pretty limited in that an audio track can only be selected in the Prepared state.

Parameters
index Int: the index of the track to be selected. The valid range of the index is 0..total number of track - 1. The total number of tracks as well as the type of each individual track can be found by calling getTrackInfo() method.
Exceptions
java.lang.IllegalStateException if called in an invalid state.

setAudioAttributes

Added in API level 21
open fun setAudioAttributes(attributes: AudioAttributes!): Unit

Sets the audio attributes for this MediaPlayer. See AudioAttributes for how to build and configure an instance of this class. You must call this method before prepare() or prepareAsync() in order for the audio attributes to become effective thereafter.

Parameters
attributes AudioAttributes!: a non-null set of audio attributes

setAudioSessionId

Added in API level 9
open fun setAudioSessionId(sessionId: Int): Unit

Sets the audio session ID.

Parameters
sessionId Int: the audio session ID. The audio session ID is a system wide unique identifier for the audio stream played by this MediaPlayer instance. The primary use of the audio session ID is to associate audio effects to a particular instance of MediaPlayer: if an audio session ID is provided when creating an audio effect, this effect will be applied only to the audio content of media players within the same audio session and not to the output mix. When created, a MediaPlayer instance automatically generates its own audio session ID. However, it is possible to force this player to be part of an already existing audio session by calling this method. This method must be called before one of the overloaded setDataSource methods. Note that session id set using this method will override device-specific audio session id, if the MediaPlayer was instantiated using device-specific Context - see MediaPlayer#MediaPlayer(Context).
Exceptions
java.lang.IllegalStateException if it is called in an invalid state

setAudioStreamType

Added in API level 1
Deprecated in API level 26
open fun setAudioStreamType(streamtype: Int): Unit

Deprecated: use setAudioAttributes(android.media.AudioAttributes)

Sets the audio stream type for this MediaPlayer. See AudioManager for a list of stream types. Must call this method before prepare() or prepareAsync() in order for the target stream type to become effective thereafter.

Parameters
streamtype Int: the audio stream type

setAuxEffectSendLevel

Added in API level 9
open fun setAuxEffectSendLevel(level: Float): Unit

Sets the send level of the player to the attached auxiliary effect. See attachAuxEffect(int). The level value range is 0 to 1.0.

By default the send level is 0, so even if an effect is attached to the player this method must be called for the effect to be applied.

Note that the passed level value is a raw scalar. UI controls should be scaled logarithmically: the gain applied by audio framework ranges from -72dB to 0dB, so an appropriate conversion from linear UI input x to level is: x == 0 -> level = 0 0 < x <= R -> level = 10^(72*(x-R)/20/R)

Parameters
level Float: send level scalar

setDataSource

Added in API level 1
open fun setDataSource(
    context: Context,
    uri: Uri
): Unit

Sets the data source as a content Uri.

Parameters
context Context: the Context to use when resolving the Uri This value cannot be null.
uri Uri: the Content URI of the data you want to play This value cannot be null.
Exceptions
java.lang.IllegalStateException if it is called in an invalid state

setDataSource

Added in API level 26
open fun setDataSource(
    context: Context,
    uri: Uri,
    headers: MutableMap<String!, String!>?,
    cookies: MutableList<HttpCookie!>?
): Unit

Sets the data source as a content Uri. To provide cookies for the subsequent HTTP requests, you can install your own default cookie handler and use other variants of setDataSource APIs instead. Alternatively, you can use this API to pass the cookies as a list of HttpCookie. If the app has not installed a CookieHandler already, this API creates a CookieManager and populates its CookieStore with the provided cookies. If the app has installed its own handler already, this API requires the handler to be of CookieManager type such that the API can update the manager's CookieStore.

Note that the cross domain redirection is allowed by default, but that can be changed with key/value pairs through the headers parameter with "android-allow-cross-domain-redirect" as the key and "0" or "1" as the value to disallow or allow cross domain redirection.

Parameters
context Context: the Context to use when resolving the Uri This value cannot be null.
uri Uri: the Content URI of the data you want to play This value cannot be null.
headers MutableMap<String!, String!>?: the headers to be sent together with the request for the data The headers must not include cookies. Instead, use the cookies param. This value may be null.
cookies MutableList<HttpCookie!>?: the cookies to be sent together with the request This value may be null.
Exceptions
java.lang.IllegalArgumentException if cookies are provided and the installed handler is not a CookieManager
java.lang.IllegalStateException if it is called in an invalid state
java.lang.NullPointerException if context or uri is null
java.io.IOException if uri has a file scheme and an I/O error occurs

setDataSource

Added in API level 14
open fun setDataSource(
    context: Context,
    uri: Uri,
    headers: MutableMap<String!, String!>?
): Unit

Sets the data source as a content Uri.

Note that the cross domain redirection is allowed by default, but that can be changed with key/value pairs through the headers parameter with "android-allow-cross-domain-redirect" as the key and "0" or "1" as the value to disallow or allow cross domain redirection.

Parameters
context Context: the Context to use when resolving the Uri This value cannot be null.
uri Uri: the Content URI of the data you want to play This value cannot be null.
headers MutableMap<String!, String!>?: the headers to be sent together with the request for the data This value may be null.
Exceptions
java.lang.IllegalStateException if it is called in an invalid state

setDataSource

Added in API level 1
open fun setDataSource(path: String!): Unit

Sets the data source (file-path or http/rtsp URL) to use.

When path refers to a local file, the file may actually be opened by a process other than the calling application. This implies that the pathname should be an absolute path (as any other process runs with unspecified current working directory), and that the pathname should reference a world-readable file. As an alternative, the application could first open the file for reading, and then use the file descriptor form setDataSource(java.io.FileDescriptor).

Parameters
path String!: the path of the file, or the http/rtsp URL of the stream you want to play
Exceptions
java.lang.IllegalStateException if it is called in an invalid state

setDataSource

Added in API level 24
open fun setDataSource(afd: AssetFileDescriptor): Unit

Sets the data source (AssetFileDescriptor) to use. It is the caller's responsibility to close the file descriptor. It is safe to do so as soon as this call returns.

Parameters
afd AssetFileDescriptor: the AssetFileDescriptor for the file you want to play This value cannot be null.
Exceptions
java.lang.IllegalStateException if it is called in an invalid state
java.lang.IllegalArgumentException if afd is not a valid AssetFileDescriptor
java.io.IOException if afd can not be read

setDataSource

Added in API level 1
open fun setDataSource(fd: FileDescriptor!): Unit

Sets the data source (FileDescriptor) to use. It is the caller's responsibility to close the file descriptor. It is safe to do so as soon as this call returns.

Parameters
fd FileDescriptor!: the FileDescriptor for the file you want to play
Exceptions
java.lang.IllegalStateException if it is called in an invalid state
java.lang.IllegalArgumentException if fd is not a valid FileDescriptor
java.io.IOException if fd can not be read

setDataSource

Added in API level 1
open fun setDataSource(
    fd: FileDescriptor!,
    offset: Long,
    length: Long
): Unit

Sets the data source (FileDescriptor) to use. The FileDescriptor must be seekable (N.B. a LocalSocket is not seekable). It is the caller's responsibility to close the file descriptor. It is safe to do so as soon as this call returns.

Parameters
fd FileDescriptor!: the FileDescriptor for the file you want to play
offset Long: the offset into the file where the data to be played starts, in bytes
length Long: the length in bytes of the data to be played
Exceptions
java.lang.IllegalStateException if it is called in an invalid state
java.lang.IllegalArgumentException if fd is not a valid FileDescriptor
java.io.IOException if fd can not be read

setDataSource

Added in API level 23
open fun setDataSource(dataSource: MediaDataSource!): Unit

Sets the data source (MediaDataSource) to use.

Parameters
dataSource MediaDataSource!: the MediaDataSource for the media you want to play
Exceptions
java.lang.IllegalStateException if it is called in an invalid state
java.lang.IllegalArgumentException if dataSource is not a valid MediaDataSource

setDisplay

Added in API level 1
open fun setDisplay(sh: SurfaceHolder!): Unit

Sets the SurfaceHolder to use for displaying the video portion of the media. Either a surface holder or surface must be set if a display or video sink is needed. Not calling this method or setSurface(android.view.Surface) when playing back a video will result in only the audio track being played. A null surface holder or surface will result in only the audio track being played.

Parameters
sh SurfaceHolder!: the SurfaceHolder to use for video display
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized or has been released.

setDrmPropertyString

Added in API level 26
open fun setDrmPropertyString(
    propertyName: String,
    value: String
): Unit

Set a DRM engine plugin String property value.

Parameters
propertyName String: the property name This value cannot be null. Value is android.media.MediaDrm#PROPERTY_VENDOR, android.media.MediaDrm#PROPERTY_VERSION, android.media.MediaDrm#PROPERTY_DESCRIPTION, or android.media.MediaDrm#PROPERTY_ALGORITHMS
value String: the property value Standard fields names are: MediaDrm#PROPERTY_VENDOR, MediaDrm#PROPERTY_VERSION, MediaDrm#PROPERTY_DESCRIPTION, MediaDrm#PROPERTY_ALGORITHMS This value cannot be null.

setLooping

Added in API level 1
open fun setLooping(looping: Boolean): Unit

Sets the player to be looping or non-looping.

Parameters
looping Boolean: whether to loop or not

setNextMediaPlayer

Added in API level 16
open fun setNextMediaPlayer(next: MediaPlayer!): Unit

Set the MediaPlayer to start when this MediaPlayer finishes playback (i.e. reaches the end of the stream). The media framework will attempt to transition from this player to the next as seamlessly as possible. The next player can be set at any time before completion, but shall be after setDataSource has been called successfully. The next player must be prepared by the app, and the application should not call start() on it. The next MediaPlayer must be different from 'this'. An exception will be thrown if next == this. The application may call setNextMediaPlayer(null) to indicate no next player should be started at the end of playback. If the current player is looping, it will keep looping and the next player will not be started.

Parameters
next MediaPlayer!: the player to start after this one completes playback.

setOnBufferingUpdateListener

Added in API level 1
open fun setOnBufferingUpdateListener(listener: MediaPlayer.OnBufferingUpdateListener!): Unit

Register a callback to be invoked when the status of a network stream's buffer has changed.

Parameters
listener MediaPlayer.OnBufferingUpdateListener!: the callback that will be run.

setOnCompletionListener

Added in API level 1
open fun setOnCompletionListener(listener: MediaPlayer.OnCompletionListener!): Unit

Register a callback to be invoked when the end of a media source has been reached during playback.

Parameters
listener MediaPlayer.OnCompletionListener!: the callback that will be run

setOnDrmConfigHelper

Added in API level 26
open fun setOnDrmConfigHelper(listener: MediaPlayer.OnDrmConfigHelper!): Unit

Register a callback to be invoked for configuration of the DRM object before the session is created. The callback will be invoked synchronously during the execution of prepareDrm(java.util.UUID).

Parameters
listener MediaPlayer.OnDrmConfigHelper!: the callback that will be run

setOnDrmInfoListener

Added in API level 26
open fun setOnDrmInfoListener(listener: MediaPlayer.OnDrmInfoListener!): Unit

Register a callback to be invoked when the DRM info is known.

Parameters
listener MediaPlayer.OnDrmInfoListener!: the callback that will be run

setOnDrmInfoListener

Added in API level 26
open fun setOnDrmInfoListener(
    listener: MediaPlayer.OnDrmInfoListener!,
    handler: Handler!
): Unit

Register a callback to be invoked when the DRM info is known.

Parameters
listener MediaPlayer.OnDrmInfoListener!: the callback that will be run

setOnDrmPreparedListener

Added in API level 26
open fun setOnDrmPreparedListener(listener: MediaPlayer.OnDrmPreparedListener!): Unit

Register a callback to be invoked when the DRM object is prepared.

Parameters
listener MediaPlayer.OnDrmPreparedListener!: the callback that will be run

setOnDrmPreparedListener

Added in API level 26
open fun setOnDrmPreparedListener(
    listener: MediaPlayer.OnDrmPreparedListener!,
    handler: Handler!
): Unit

Register a callback to be invoked when the DRM object is prepared.

Parameters
listener MediaPlayer.OnDrmPreparedListener!: the callback that will be run
handler Handler!: the Handler that will receive the callback

setOnErrorListener

Added in API level 1
open fun setOnErrorListener(listener: MediaPlayer.OnErrorListener!): Unit

Register a callback to be invoked when an error has happened during an asynchronous operation.

Parameters
listener MediaPlayer.OnErrorListener!: the callback that will be run

setOnInfoListener

Added in API level 3
open fun setOnInfoListener(listener: MediaPlayer.OnInfoListener!): Unit

Register a callback to be invoked when an info/warning is available.

Parameters
listener MediaPlayer.OnInfoListener!: the callback that will be run

setOnMediaTimeDiscontinuityListener

Added in API level 28
open fun setOnMediaTimeDiscontinuityListener(
    listener: MediaPlayer.OnMediaTimeDiscontinuityListener,
    handler: Handler
): Unit

Sets the listener to be invoked when a media time discontinuity is encountered.

Parameters
listener MediaPlayer.OnMediaTimeDiscontinuityListener: the listener called after a discontinuity This value cannot be null.
handler Handler: the Handler that receives the listener events This value cannot be null.

setOnMediaTimeDiscontinuityListener

Added in API level 28
open fun setOnMediaTimeDiscontinuityListener(listener: MediaPlayer.OnMediaTimeDiscontinuityListener): Unit

Sets the listener to be invoked when a media time discontinuity is encountered. The listener will be called on the same thread as the one in which the MediaPlayer was created.

Parameters
listener MediaPlayer.OnMediaTimeDiscontinuityListener: the listener called after a discontinuity This value cannot be null.

setOnPreparedListener

Added in API level 1
open fun setOnPreparedListener(listener: MediaPlayer.OnPreparedListener!): Unit

Register a callback to be invoked when the media source is ready for playback.

Parameters
listener MediaPlayer.OnPreparedListener!: the callback that will be run

setOnSeekCompleteListener

Added in API level 1
open fun setOnSeekCompleteListener(listener: MediaPlayer.OnSeekCompleteListener!): Unit

Register a callback to be invoked when a seek operation has been completed.

Parameters
listener MediaPlayer.OnSeekCompleteListener!: the callback that will be run

setOnSubtitleDataListener

Added in API level 28
open fun setOnSubtitleDataListener(
    listener: MediaPlayer.OnSubtitleDataListener,
    handler: Handler
): Unit

Sets the listener to be invoked when a subtitle track has new data available. The subtitle data comes from a subtitle track previously selected with selectTrack(int). Use getTrackInfo() to determine which tracks are subtitles (of type TrackInfo#MEDIA_TRACK_TYPE_SUBTITLE), Subtitle track encodings can be determined by TrackInfo#getFormat()).
See SubtitleData for an example of querying subtitle encoding.

Parameters
listener MediaPlayer.OnSubtitleDataListener: the listener called when new data is available This value cannot be null.
handler Handler: the Handler that receives the listener events This value cannot be null.

setOnSubtitleDataListener

Added in API level 28
open fun setOnSubtitleDataListener(listener: MediaPlayer.OnSubtitleDataListener): Unit

Sets the listener to be invoked when a subtitle track has new data available. The subtitle data comes from a subtitle track previously selected with selectTrack(int). Use getTrackInfo() to determine which tracks are subtitles (of type TrackInfo#MEDIA_TRACK_TYPE_SUBTITLE), Subtitle track encodings can be determined by TrackInfo#getFormat()).
See SubtitleData for an example of querying subtitle encoding.
The listener will be called on the same thread as the one in which the MediaPlayer was created.

Parameters
listener MediaPlayer.OnSubtitleDataListener: the listener called when new data is available This value cannot be null.

setOnTimedMetaDataAvailableListener

Added in API level 23
open fun setOnTimedMetaDataAvailableListener(listener: MediaPlayer.OnTimedMetaDataAvailableListener!): Unit

Register a callback to be invoked when a selected track has timed metadata available.

Currently only HTTP live streaming data URI's embedded with timed ID3 tags generates TimedMetaData.

Parameters
listener MediaPlayer.OnTimedMetaDataAvailableListener!: the callback that will be run

setOnTimedTextListener

Added in API level 16
open fun setOnTimedTextListener(listener: MediaPlayer.OnTimedTextListener!): Unit

Register a callback to be invoked when a timed text is available for display.

Parameters
listener MediaPlayer.OnTimedTextListener!: the callback that will be run

setOnVideoSizeChangedListener

Added in API level 3
open fun setOnVideoSizeChangedListener(listener: MediaPlayer.OnVideoSizeChangedListener!): Unit

Register a callback to be invoked when the video size is known or updated.

Parameters
listener MediaPlayer.OnVideoSizeChangedListener!: the callback that will be run

setPlaybackParams

Added in API level 23
open fun setPlaybackParams(params: PlaybackParams): Unit

Sets playback rate using PlaybackParams. The object sets its internal PlaybackParams to the input, except that the object remembers previous speed when input speed is zero. This allows the object to resume at previous speed when start() is called. Calling it before the object is prepared does not change the object state. After the object is prepared, calling it with zero speed is equivalent to calling pause(). After the object is prepared, calling it with non-zero speed is equivalent to calling start().

Parameters
params PlaybackParams: the playback params. This value cannot be null.
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized or has been released.
java.lang.IllegalArgumentException if params is not supported.

setPreferredDevice

Added in API level 28
open fun setPreferredDevice(deviceInfo: AudioDeviceInfo!): Boolean

Specifies an audio device (via an AudioDeviceInfo object) to route the output from this MediaPlayer.

Parameters
deviceInfo AudioDeviceInfo!: The AudioDeviceInfo specifying the audio sink or source. If deviceInfo is null, default routing is restored.
Return
Boolean true if succesful, false if the specified AudioDeviceInfo is non-null and does not correspond to a valid audio device.

setScreenOnWhilePlaying

Added in API level 1
open fun setScreenOnWhilePlaying(screenOn: Boolean): Unit

Control whether we should use the attached SurfaceHolder to keep the screen on while video playback is occurring. This is the preferred method over setWakeMode where possible, since it doesn't require that the application have permission for low-level wake lock access.

Parameters
screenOn Boolean: Supply true to keep the screen on, false to allow it to turn off.

setSurface

Added in API level 14
open fun setSurface(surface: Surface!): Unit

Sets the Surface to be used as the sink for the video portion of the media. This is similar to setDisplay(android.view.SurfaceHolder), but does not support setScreenOnWhilePlaying(boolean). Setting a Surface will un-set any Surface or SurfaceHolder that was previously set. A null surface will result in only the audio track being played. If the Surface sends frames to a SurfaceTexture, the timestamps returned from SurfaceTexture#getTimestamp() will have an unspecified zero point. These timestamps cannot be directly compared between different media sources, different instances of the same media source, or multiple runs of the same program. The timestamp is normally monotonically increasing and is unaffected by time-of-day adjustments, but it is reset when the position is set.

Parameters
surface Surface!: The Surface to be used for the video portion of the media.
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized or has been released.

setSyncParams

Added in API level 23
open fun setSyncParams(params: SyncParams): Unit

Sets A/V sync mode.

Parameters
params SyncParams: the A/V sync params to apply This value cannot be null.
Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized.
java.lang.IllegalArgumentException if params are not supported.

setVideoScalingMode

Added in API level 16
open fun setVideoScalingMode(mode: Int): Unit

Sets video scaling mode. To make the target video scaling mode effective during playback, this method must be called after data source is set. If not called, the default video scaling mode is VIDEO_SCALING_MODE_SCALE_TO_FIT.

The supported video scaling modes are:

Parameters
mode Int: target video scaling mode. Must be one of the supported video scaling modes; otherwise, IllegalArgumentException will be thrown.

setVolume

Added in API level 1
open fun setVolume(
    leftVolume: Float,
    rightVolume: Float
): Unit

Sets the volume on this player. This API is recommended for balancing the output of audio streams within an application. Unless you are writing an application to control user settings, this API should be used in preference to AudioManager#setStreamVolume(int, int, int) which sets the volume of ALL streams of a particular type. Note that the passed volume values are raw scalars in range 0.0 to 1.0. UI controls should be scaled logarithmically.

Parameters
leftVolume Float: left volume scalar
rightVolume Float: right volume scalar

setWakeMode

Added in API level 1
open fun setWakeMode(
    context: Context!,
    mode: Int
): Unit

Set the low-level power management behavior for this MediaPlayer. This can be used when the MediaPlayer is not playing through a SurfaceHolder set with setDisplay(android.view.SurfaceHolder) and thus can use the high-level setScreenOnWhilePlaying(boolean) feature.

This function has the MediaPlayer access the low-level power manager service to control the device's power usage while playing is occurring. The parameter is a combination of android.os.PowerManager wake flags. Use of this method requires android.Manifest.permission#WAKE_LOCK permission. By default, no attempt is made to keep the device awake during playback.

Parameters
context Context!: the Context to use
mode Int: the power/wake mode to set

start

Added in API level 1
open fun start(): Unit

Starts or resumes playback. If playback had previously been paused, playback will continue from where it was paused. If playback had been stopped, or never started before, playback will start at the beginning.

Exceptions
java.lang.IllegalStateException if it is called in an invalid state

stop

Added in API level 1
open fun stop(): Unit

Stops playback after playback has been started or paused.

Exceptions
java.lang.IllegalStateException if the internal player engine has not been initialized.

Protected methods

finalize

Added in API level 1
protected open fun finalize(): Unit
Exceptions
java.lang.Throwable the Exception raised by this method