Added in API level 26

AudioFocusRequest


class AudioFocusRequest
kotlin.Any
   ↳ android.media.AudioFocusRequest

A class to encapsulate information about an audio focus request. An AudioFocusRequest instance is built by Builder, and is used to request and abandon audio focus, respectively with AudioManager#requestAudioFocus(AudioFocusRequest) and AudioManager#abandonAudioFocusRequest(AudioFocusRequest).

What is audio focus?

Audio focus is a concept introduced in API 8. It is used to convey the fact that a user can only focus on a single audio stream at a time, e.g. listening to music or a podcast, but not both at the same time. In some cases, multiple audio streams can be playing at the same time, but there is only one the user would really listen to (focus on), while the other plays in the background. An example of this is driving directions being spoken while music plays at a reduced volume (a.k.a. ducking).

When an application requests audio focus, it expresses its intention to "own" audio focus to play audio. Let's review the different types of focus requests, the return value after a request, and the responses to a loss.

Note: applications should not play anything until granted focus.

The different types of focus requests

There are four focus request types. A successful focus request with each will yield different behaviors by the system and the other application that previously held audio focus.

  • AudioManager#AUDIOFOCUS_GAIN expresses the fact that your application is now the sole source of audio that the user is listening to. The duration of the audio playback is unknown, and is possibly very long: after the user finishes interacting with your application, (s)he doesn't expect another audio stream to resume. Examples of uses of this focus gain are for music playback, for a game or a video player.
  • AudioManager#AUDIOFOCUS_GAIN_TRANSIENT is for a situation when you know your application is temporarily grabbing focus from the current owner, but the user expects playback to go back to where it was once your application no longer requires audio focus. An example is for playing an alarm, or during a VoIP call. The playback is known to be finite: the alarm will time-out or be dismissed, the VoIP call has a beginning and an end. When any of those events ends, and if the user was listening to music when it started, the user expects music to resume, but didn't wish to listen to both at the same time.
  • AudioManager#AUDIOFOCUS_GAIN_TRANSIENT_MAY_DUCK: this focus request type is similar to AUDIOFOCUS_GAIN_TRANSIENT for the temporary aspect of the focus request, but it also expresses the fact during the time you own focus, you allow another application to keep playing at a reduced volume, "ducked". Examples are when playing driving directions or notifications, it's ok for music to keep playing, but not loud enough that it would prevent the directions to be hard to understand. A typical attenuation by the "ducked" application is a factor of 0.2f (or -14dB), that can for instance be applied with MediaPlayer.setVolume(0.2f) when using this class for playback.
  • AudioManager#AUDIOFOCUS_GAIN_TRANSIENT_EXCLUSIVE is also for a temporary request, but also expresses that your application expects the device to not play anything else. This is typically used if you are doing audio recording or speech recognition, and don't want for examples notifications to be played by the system during that time.

An AudioFocusRequest instance always contains one of the four types of requests explained above. It is passed when building an AudioFocusRequest instance with its builder in the Builder constructor AudioFocusRequest.Builder#Builder(int), or with AudioFocusRequest.Builder#setFocusGain(int) after copying an existing instance with AudioFocusRequest.Builder#Builder(AudioFocusRequest).

Qualifying your focus request

Use case requiring a focus request

Any focus request is qualified by the AudioAttributes (see Builder#setAudioAttributes(AudioAttributes)) that describe the audio use case that will follow the request (once it's successful or granted). It is recommended to use the same AudioAttributes for the request as the attributes you are using for audio/media playback.
If no attributes are set, default attributes of AudioAttributes#USAGE_MEDIA are used.

Delayed focus

Audio focus can be "locked" by the system for a number of reasons: during a phone call, when the car to which the device is connected plays an emergency message... To support these situations, the application can request to be notified when its request is fulfilled, by flagging its request as accepting delayed focus, with Builder#setAcceptsDelayedFocusGain(boolean).
If focus is requested while being locked by the system, AudioManager#requestAudioFocus(AudioFocusRequest) will return AudioManager#AUDIOFOCUS_REQUEST_DELAYED. When focus isn't locked anymore, the focus listener set with Builder#setOnAudioFocusChangeListener(OnAudioFocusChangeListener) or with Builder#setOnAudioFocusChangeListener(OnAudioFocusChangeListener, Handler) will be called to notify the application it now owns audio focus.

Pausing vs ducking

When an application requested audio focus with AudioManager#AUDIOFOCUS_GAIN_TRANSIENT_MAY_DUCK, the system will duck the current focus owner.

Note: this behavior is new for Android O, whereas applications targeting SDK level up to API 25 had to implement the ducking themselves when they received a focus loss of AudioManager#AUDIOFOCUS_LOSS_TRANSIENT_CAN_DUCK.

But ducking is not always the behavior expected by the user. A typical example is when the device plays driving directions while the user is listening to an audio book or podcast, and expects the audio playback to pause, instead of duck, as it is hard to understand a navigation prompt and spoken content at the same time. Therefore the system will not automatically duck when it detects it would be ducking spoken content: such content is detected when the AudioAttributes of the player are qualified by AudioAttributes#CONTENT_TYPE_SPEECH. Refer for instance to AudioAttributes.Builder#setContentType(int) and MediaPlayer#setAudioAttributes(AudioAttributes) if you are writing a media playback application for audio book, podcasts... Since the system will not automatically duck applications that play speech, it calls their focus listener instead to notify them of AudioManager#AUDIOFOCUS_LOSS_TRANSIENT_CAN_DUCK, so they can pause instead. Note that this behavior is independent of the use of AudioFocusRequest, but tied to the use of AudioAttributes.

If your application requires pausing instead of ducking for any other reason than playing speech, you can also declare so with Builder#setWillPauseWhenDucked(boolean), which will cause the system to call your focus listener instead of automatically ducking.

Example

The example below covers the following steps to be found in any application that would play audio, and use audio focus. Here we play an audio book, and our application is intended to pause rather than duck when it loses focus. These steps consist in:

  • Creating AudioAttributes to be used for the playback and the focus request.
  • Configuring and creating the AudioFocusRequest instance that defines the intended focus behaviors.
  • Requesting audio focus and checking the return code to see if playback can happen right away, or is delayed.
  • Implementing a focus change listener to respond to focus gains and losses.

// initialization of the audio attributes and focus request
  mAudioManager = (AudioManager) Context.getSystemService(Context.AUDIO_SERVICE);
  mPlaybackAttributes = new AudioAttributes.Builder()
          .setUsage(AudioAttributes.USAGE_MEDIA)
          .setContentType(AudioAttributes.CONTENT_TYPE_SPEECH)
          .build();
  mFocusRequest = new AudioFocusRequest.Builder(AudioManager.AUDIOFOCUS_GAIN)
          .setAudioAttributes(mPlaybackAttributes)
          .setAcceptsDelayedFocusGain(true)
          .setWillPauseWhenDucked(true)
          .setOnAudioFocusChangeListener(this, mMyHandler)
          .build();
  mMediaPlayer = new MediaPlayer();
  mMediaPlayer.setAudioAttributes(mPlaybackAttributes);
  final Object mFocusLock = new Object();
 
  boolean mPlaybackDelayed = false;
 
  // requesting audio focus
  int res = mAudioManager.requestAudioFocus(mFocusRequest);
  synchronized (mFocusLock) {
      if (res == AudioManager.AUDIOFOCUS_REQUEST_FAILED) {
          mPlaybackDelayed = false;
      } else if (res == AudioManager.AUDIOFOCUS_REQUEST_GRANTED) {
          mPlaybackDelayed = false;
          playbackNow();
      } else if (res == AudioManager.AUDIOFOCUS_REQUEST_DELAYED) {
         mPlaybackDelayed = true;
      }
  }
 
  // implementation of the OnAudioFocusChangeListener
  @Override
  public void onAudioFocusChange(int focusChange) {
      switch (focusChange) {
          case AudioManager.AUDIOFOCUS_GAIN:
              if (mPlaybackDelayed || mResumeOnFocusGain) {
                  synchronized (mFocusLock) {
                      mPlaybackDelayed = false;
                      mResumeOnFocusGain = false;
                  }
                  playbackNow();
              }
              break;
          case AudioManager.AUDIOFOCUS_LOSS:
              synchronized (mFocusLock) {
                  // this is not a transient loss, we shouldn't automatically resume for now
                  mResumeOnFocusGain = false;
                  mPlaybackDelayed = false;
              }
              pausePlayback();
              break;
          case AudioManager.AUDIOFOCUS_LOSS_TRANSIENT:
          case AudioManager.AUDIOFOCUS_LOSS_TRANSIENT_CAN_DUCK:
              // we handle all transient losses the same way because we never duck audio books
              synchronized (mFocusLock) {
                  // we should only resume if playback was interrupted
                  mResumeOnFocusGain = mMediaPlayer.isPlaying();
                  mPlaybackDelayed = false;
              }
              pausePlayback();
              break;
      }
  }
 
  // Important:
  // Also set "mResumeOnFocusGain" to false when the user pauses or stops playback: this way your
  // application doesn't automatically restart when it gains focus, even though the user had
  // stopped it.
  

Summary

Nested classes

Builder class for AudioFocusRequest objects.

Public methods
Boolean

Returns whether the application that would use this AudioFocusRequest supports a focus gain granted after a temporary request failure.

AudioAttributes

Returns the AudioAttributes set for this AudioFocusRequest, or the default attributes if none were set.

Int

Returns the type of audio focus request configured for this AudioFocusRequest.

Boolean

Returns whether the application that would use this AudioFocusRequest would pause when it is requested to duck.

Public methods

acceptsDelayedFocusGain

Added in API level 26
fun acceptsDelayedFocusGain(): Boolean

Returns whether the application that would use this AudioFocusRequest supports a focus gain granted after a temporary request failure.

Return
Boolean whether delayed focus gain is supported.

getAudioAttributes

Added in API level 26
fun getAudioAttributes(): AudioAttributes

Returns the AudioAttributes set for this AudioFocusRequest, or the default attributes if none were set.

Return
AudioAttributes non-null AudioAttributes.

getFocusGain

Added in API level 26
fun getFocusGain(): Int

Returns the type of audio focus request configured for this AudioFocusRequest.

Return
Int one of AudioManager#AUDIOFOCUS_GAIN, AudioManager#AUDIOFOCUS_GAIN_TRANSIENT, AudioManager#AUDIOFOCUS_GAIN_TRANSIENT_MAY_DUCK, and AudioManager#AUDIOFOCUS_GAIN_TRANSIENT_EXCLUSIVE.

willPauseWhenDucked

Added in API level 26
fun willPauseWhenDucked(): Boolean

Returns whether the application that would use this AudioFocusRequest would pause when it is requested to duck.

Return
Boolean the duck/pause behavior.