Builder

Kotlin |Java

class Builder

kotlin.Any
↳	android.net.wifi.rtt.RangingResult.Builder

Builder class used to construct RangingResult objects.

Summary

Public constructors
`Builder()`

Public methods
RangingResult	`build()` Build `RangingResult`
RangingResult.Builder	`set80211azInitiatorTxLtfRepetitionsCount(i2rTxLtfRepetitions: Int)` Sets LTF repetitions that the initiator station used in the preamble.
RangingResult.Builder	`set80211azNtbMeasurement(is80211azNtbMeasurement: Boolean)` Sets whether the ranging measurement was performed using IEEE 802.
RangingResult.Builder	`set80211azNumberOfRxSpatialStreams(numRxSpatialStreams: Int)` Sets number of receive spatial streams that the initiator station used for the ranging result.
RangingResult.Builder	`set80211azNumberOfTxSpatialStreams(numTxSpatialStreams: Int)` Sets number of transmit spatial streams that the initiator station used for the ranging result.
RangingResult.Builder	`set80211azResponderTxLtfRepetitionsCount(r2iTxLtfRepetitions: Int)` Sets LTF repetitions that the responder station used in the preamble.
RangingResult.Builder	`set80211mcMeasurement(is80211mcMeasurement: Boolean)` Sets whether the ranging measurement was performed using IEEE 802.
RangingResult.Builder	`setDistanceMm(distanceMm: Int)` Sets the distance in millimeter.
RangingResult.Builder	`setDistanceStdDevMm(distanceStdDevMm: Int)` Sets the standard deviation of the distance in millimeter.
RangingResult.Builder	`setLci(lci: ByteArray?)` Sets the Location Configuration Information (LCI).
RangingResult.Builder	`setLcr(lcr: ByteArray?)` Sets the Location Civic Report (LCR).
RangingResult.Builder	`setMacAddress(macAddress: MacAddress?)` Sets the MAC address of the ranging result.
RangingResult.Builder	`setMaxTimeBetweenNtbMeasurementsMicros(ntbMaxMeasurementTime: Long)` Sets maximum time between measurements in microseconds for IEEE 802.
RangingResult.Builder	`setMeasurementBandwidth(measurementBandwidth: Int)` Sets the bandwidth used to transmit the RTT measurement frame.
RangingResult.Builder	`setMeasurementChannelFrequencyMHz(frequencyMHz: Int)` Sets the center frequency of the primary 20 MHz frequency (in MHz) of the channel over which the measurement frames are sent.
RangingResult.Builder	`setMinTimeBetweenNtbMeasurementsMicros(ntbMinMeasurementTime: Long)` Sets minimum time between measurements in microseconds for IEEE 802.
RangingResult.Builder	`setNumAttemptedMeasurements(numAttemptedMeasurements: Int)` Sets the total number of RTT measurements attempted.
RangingResult.Builder	`setNumSuccessfulMeasurements(numSuccessfulMeasurements: Int)` Sets the total number of successful RTT measurements.
RangingResult.Builder	`setPeerHandle(peerHandle: PeerHandle?)` Sets the peer handle.
RangingResult.Builder	`setRangingTimestampMillis(timestamp: Long)` Sets the time stamp at which the ranging operation was performed.
RangingResult.Builder	`setRssi(rssi: Int)` Sets the average RSSI.
RangingResult.Builder	`setStatus(status: Int)` Sets the Range result status.
RangingResult.Builder	`setUnverifiedResponderLocation(responderLocation: ResponderLocation?)` Sets Responder Location.

Public constructors

Builder

Added in API level 35

Builder()

Public methods

build

Added in API level 35

fun build(): RangingResult

Build RangingResult

Return
`RangingResult`	an instance of `RangingResult` This value cannot be `null`.

set80211azInitiatorTxLtfRepetitionsCount

Added in API level 35

fun set80211azInitiatorTxLtfRepetitionsCount(i2rTxLtfRepetitions: Int): RangingResult.Builder

Sets LTF repetitions that the initiator station used in the preamble. If not set, defaults to RangingResult#UNSPECIFIED.

Parameters
`i2rTxLtfRepetitions`	Int: LFT repetition count.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

set80211azNtbMeasurement

Added in API level 35

fun set80211azNtbMeasurement(is80211azNtbMeasurement: Boolean): RangingResult.Builder

Sets whether the ranging measurement was performed using IEEE 802.11az non-trigger ranging method. If set80211azNtbMeasurement(boolean) is set as false and set80211mcMeasurement(boolean) is also set as false, ranging measurement was performed using one-side RTT. If not set defaults to false.

Parameters
`is80211azNtbMeasurement`	Boolean: true for IEEE 802.11az non-trigger based measurement, otherwise false.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

set80211azNumberOfRxSpatialStreams

Added in API level 35

fun set80211azNumberOfRxSpatialStreams(numRxSpatialStreams: Int): RangingResult.Builder

Sets number of receive spatial streams that the initiator station used for the ranging result. If not set, defaults to RangingResult#UNSPECIFIED.

Parameters
`numRxSpatialStreams`	Int: Number of receive spatial streams.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

set80211azNumberOfTxSpatialStreams

Added in API level 35

fun set80211azNumberOfTxSpatialStreams(numTxSpatialStreams: Int): RangingResult.Builder

Sets number of transmit spatial streams that the initiator station used for the ranging result. If not set, defaults to RangingResult#UNSPECIFIED.

Parameters
`numTxSpatialStreams`	Int: Number of transmit spatial streams.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

set80211azResponderTxLtfRepetitionsCount

Added in API level 35

fun set80211azResponderTxLtfRepetitionsCount(r2iTxLtfRepetitions: Int): RangingResult.Builder

Sets LTF repetitions that the responder station used in the preamble. If not set, defaults to RangingResult#UNSPECIFIED.

Parameters
`r2iTxLtfRepetitions`	Int: LFT repetition count.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

set80211mcMeasurement

Added in API level 35

fun set80211mcMeasurement(is80211mcMeasurement: Boolean): RangingResult.Builder

Sets whether the ranging measurement was performed using IEEE 802.11mc ranging method. If set80211mcMeasurement(boolean) is set as false and set80211azNtbMeasurement(boolean) is also set as false, ranging measurement was performed using one-side RTT. If not set, default to false.

Parameters
`is80211mcMeasurement`	Boolean: true for IEEE 802.11mc measure, otherwise false.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setDistanceMm

Added in API level 35

fun setDistanceMm(distanceMm: Int): RangingResult.Builder

Sets the distance in millimeter.

Parameters
`distanceMm`	Int: distance. If not set, defaults to 0.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setDistanceStdDevMm

Added in API level 35

fun setDistanceStdDevMm(distanceStdDevMm: Int): RangingResult.Builder

Sets the standard deviation of the distance in millimeter.

Parameters
`distanceStdDevMm`	Int: Standard deviation of the distance measurement. If not set defaults to 0.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setLci

Added in API level 35

fun setLci(lci: ByteArray?): RangingResult.Builder

Sets the Location Configuration Information (LCI). LCI provides data about the access point's (AP) physical location, such as its latitude, longitude, and altitude. The format is specified in the IEEE 802.11-2016 specifications, section 9.4.2.22.10.

Parameters
`lci`	ByteArray?: Location configuration information. If not set, defaults to null.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setLcr

Added in API level 35

fun setLcr(lcr: ByteArray?): RangingResult.Builder

Sets the Location Civic Report (LCR). LCR provides additional details about the AP's location in a human-readable format, such as the street address, building name, or floor number. This can be helpful for users to understand the context of their location within a building or complex. The format is specified in the IEEE 802.11-2016 specifications, section 9.4.2.22.13.

Parameters
`lcr`	ByteArray?: Location civic report. If not set, defaults to null.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setMacAddress

Added in API level 35

fun setMacAddress(macAddress: MacAddress?): RangingResult.Builder

Sets the MAC address of the ranging result.

Parameters
`macAddress`	MacAddress?: Mac address, if not defaults to null.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setMaxTimeBetweenNtbMeasurementsMicros

Added in API level 35

fun setMaxTimeBetweenNtbMeasurementsMicros(ntbMaxMeasurementTime: Long): RangingResult.Builder

Sets maximum time between measurements in microseconds for IEEE 802.11az non-trigger based ranging. If not set, defaults to RangingResult#UNSPECIFIED.

Parameters
`ntbMaxMeasurementTime`	Long: non-trigger based ranging maximum measurement time.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setMeasurementBandwidth

Added in API level 35

fun setMeasurementBandwidth(measurementBandwidth: Int): RangingResult.Builder

Sets the bandwidth used to transmit the RTT measurement frame. If not set, default to RangingResult#UNSPECIFIED.

Parameters
`measurementBandwidth`	Int: Measurement bandwidth. Value is `android.net.wifi.ScanResult#CHANNEL_WIDTH_20MHZ`, `android.net.wifi.ScanResult#CHANNEL_WIDTH_40MHZ`, `android.net.wifi.ScanResult#CHANNEL_WIDTH_80MHZ`, `android.net.wifi.ScanResult#CHANNEL_WIDTH_160MHZ`, `android.net.wifi.ScanResult#CHANNEL_WIDTH_80MHZ_PLUS_MHZ`, or `android.net.wifi.ScanResult#CHANNEL_WIDTH_320MHZ`

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setMeasurementChannelFrequencyMHz

Added in API level 35

fun setMeasurementChannelFrequencyMHz(frequencyMHz: Int): RangingResult.Builder

Sets the center frequency of the primary 20 MHz frequency (in MHz) of the channel over which the measurement frames are sent. If not set, default to RangingResult#UNSPECIFIED

Parameters
`frequencyMHz`	Int: Frequency.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setMinTimeBetweenNtbMeasurementsMicros

Added in API level 35

fun setMinTimeBetweenNtbMeasurementsMicros(ntbMinMeasurementTime: Long): RangingResult.Builder

Sets minimum time between measurements in microseconds for IEEE 802.11az non-trigger based ranging. If not set, defaults to RangingResult#UNSPECIFIED.

Parameters
`ntbMinMeasurementTime`	Long: non-trigger based ranging minimum measurement time.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setNumAttemptedMeasurements

Added in API level 35

fun setNumAttemptedMeasurements(numAttemptedMeasurements: Int): RangingResult.Builder

Sets the total number of RTT measurements attempted.

Parameters
`numAttemptedMeasurements`	Int: Number of attempted measurements. If not set, default to 0.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setNumSuccessfulMeasurements

Added in API level 35

fun setNumSuccessfulMeasurements(numSuccessfulMeasurements: Int): RangingResult.Builder

Sets the total number of successful RTT measurements.

Parameters
`numSuccessfulMeasurements`	Int: Number of successful measurements. If not set, default to 0.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setPeerHandle

Added in API level 35

fun setPeerHandle(peerHandle: PeerHandle?): RangingResult.Builder

Sets the peer handle. Applicable only for NAN Ranging.

Parameters
`peerHandle`	PeerHandle?: Opaque object used to represent a Wi-Fi Aware peer. If not set, defaults to null.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setRangingTimestampMillis

Added in API level 35

fun setRangingTimestampMillis(timestamp: Long): RangingResult.Builder

Sets the time stamp at which the ranging operation was performed. The timestamp is in milliseconds since boot, including time spent in sleep, corresponding to values provided by android.os.SystemClock#elapsedRealtime().

Parameters
`timestamp`	Long: time stamp in milliseconds. If not set, default to 0. Value is a non-negative timestamp in the `android.os.SystemClock#elapsedRealtime()` time base.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setRssi

Added in API level 35

fun setRssi(rssi: Int): RangingResult.Builder

Sets the average RSSI.

Parameters
`rssi`	Int: Average RSSI. If not set, defaults to -127.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setStatus

Added in API level 35

fun setStatus(status: Int): RangingResult.Builder

Sets the Range result status.

Parameters
`status`	Int: Ranging result status, if not set defaults to `STATUS_FAIL`. Value is `android.net.wifi.rtt.RangingResult#STATUS_SUCCESS`, `android.net.wifi.rtt.RangingResult#STATUS_FAIL`, or `android.net.wifi.rtt.RangingResult#STATUS_RESPONDER_DOES_NOT_SUPPORT_IEEE80211MC`

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.

setUnverifiedResponderLocation

Added in API level 35

fun setUnverifiedResponderLocation(responderLocation: ResponderLocation?): RangingResult.Builder

Sets Responder Location. ResponderLocation is both a Location Configuration Information (LCI) decoder and a Location Civic Report (LCR) decoder for information received from a Wi-Fi Access Point (AP) during Wi-Fi RTT ranging process.

Parameters
`responderLocation`	ResponderLocation?: Responder location. If not set, defaults to null.

Return
`RangingResult.Builder`	The builder to facilitate chaining. This value cannot be `null`.