Added in API level 21

CameraMetadata


abstract class CameraMetadata<TKey : Any!>
kotlin.Any
   ↳ android.hardware.camera2.CameraMetadata

The base class for camera controls and information.

This class defines the basic key/value map used for querying for camera characteristics or capture results, and for setting camera request parameters.

All instances of CameraMetadata are immutable. Beginning with API level 32, the list of keys returned by getKeys() may change depending on the state of the device, as may the values returned by any key with get throughout the lifetime of the object. For information on whether a specific value is fixed, see the documentation for its key.

Summary

Constants
static Int

The camera device faces the front of the vehicle body frame.

static Int

The camera device faces the left side of the vehicle body frame.

static Int

The camera device faces the outside of the vehicle body frame but not exactly one of the exterior sides defined by this enum.

static Int

The camera device faces the rear of the vehicle body frame.

static Int

The camera device faces the right side of the vehicle body frame.

static Int

The camera device faces the inside of the vehicle body frame but not exactly one of seats described by this enum.

static Int

The camera device faces the center seat of the first row.

static Int

The camera device faces the left side seat of the first row.

static Int

The camera device faces the right seat of the first row.

static Int

The camera device faces the center seat of the second row.

static Int

The camera device faces the left side seat of the second row.

static Int

The camera device faces the right side seat of the second row.

static Int

The camera device faces the center seat of the third row.

static Int

The camera device faces the left side seat of the third row.

static Int

The camera device faces the right seat of the third row.

static Int

The camera device exists outside of the vehicle body frame and on its front side.

static Int

The camera device exists outside and on left side of the vehicle body frame.

static Int

The camera exists outside of the vehicle body frame but not exactly on one of the exterior locations this enum defines.

static Int

The camera device exists outside of the vehicle body frame and on its rear side.

static Int

The camera device exists outside and on right side of the vehicle body frame.

static Int

The camera device exists outside of the extra vehicle's body frame and on its front side.

static Int

The camera device exists outside and on left side of the extra vehicle body.

static Int

The camera device exists on an extra vehicle, such as the trailer, but not exactly on one of front, rear, left, or right side.

static Int

The camera device exists outside of the extra vehicle's body frame and on its rear side.

static Int

The camera device exists outside and on right side of the extra vehicle body.

static Int

The camera device exists inside of the vehicle cabin.

static Int

Aberration correction will not slow down capture rate relative to sensor raw output.

static Int

Aberration correction operates at improved quality but the capture rate might be reduced (relative to sensor raw output rate)

static Int

No aberration correction is applied.

static Int

Color correction processing must not slow down capture rate relative to sensor raw output.

static Int

Color correction processing operates at improved quality but the capture rate might be reduced (relative to sensor raw output rate)

static Int

Use the android.colorCorrection.transform matrix and android.colorCorrection.gains to do color conversion.

static Int

The camera device will adjust exposure duration to avoid banding problems with 50Hz illumination sources.

static Int

The camera device will adjust exposure duration to avoid banding problems with 60Hz illumination sources.

static Int

The camera device will automatically adapt its antibanding routine to the current illumination condition.

static Int

The camera device will not adjust exposure duration to avoid banding problems.

static Int

The camera device's autoexposure routine is disabled.

static Int

The camera device's autoexposure routine is active, with no flash control.

static Int

Like ON, except that the camera device also controls the camera's flash unit, always firing it for still captures.

static Int

Like ON, except that the camera device also controls the camera's flash unit, firing it in low-light conditions.

static Int

Like ON_AUTO_FLASH, but with automatic red eye reduction.

static Int

An external flash has been turned on.

static Int

Like 'ON' but applies additional brightness boost in low light scenes.

static Int

The camera device will cancel any currently active or completed precapture metering sequence, the auto-exposure routine will return to its initial state.

static Int

The trigger is idle.

static Int

The precapture metering sequence will be started by the camera device.

static Int

AE has a good set of control values for the current scene.

static Int

AE has a good set of control values, but flash needs to be fired for good quality still capture.

static Int

AE is off or recently reset.

static Int

AE has been locked.

static Int

AE has been asked to do a precapture sequence and is currently executing it.

static Int

AE doesn't yet have a good set of control values for the current scene.

static Int

Basic automatic focus mode.

static Int

In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.

static Int

In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.

static Int

Extended depth of field (digital focus) mode.

static Int

Close-up focusing mode.

static Int

The auto-focus routine does not control the lens; android.lens.focusDistance is controlled by the application.

static Int

Scene change is detected within the AF region(s).

static Int

Scene change is not detected within the AF region(s).

static Int

AF is performing an AF scan because it was triggered by AF trigger.

static Int

AF believes it is focused correctly and has locked focus.

static Int

AF is off or has not yet tried to scan/been asked to scan.

static Int

AF has failed to focus successfully and has locked focus.

static Int

AF currently believes it is in focus, but may restart scanning at any time.

static Int

AF is currently performing an AF scan initiated the camera device in a continuous autofocus mode.

static Int

AF finished a passive scan without finding focus, and may restart scanning at any time.

static Int

Autofocus will return to its initial state, and cancel any currently active trigger.

static Int

The trigger is idle.

static Int

Autofocus will trigger now.

static Int

Disable autoframing.

static Int

Enable autoframing to keep people in the frame's field of view.

static Int

Auto-framing has reached a stable state (frame/fov is not being adjusted).

static Int

Auto-framing is in process - either zooming in, zooming out or pan is taking place.

static Int

Auto-framing is inactive.

static Int

The camera device's auto-white balance routine is active.

static Int

The camera device's auto-white balance routine is disabled; the camera device uses cloudy daylight light as the assumed scene illumination for white balance.

static Int

The camera device's auto-white balance routine is disabled; the camera device uses daylight light as the assumed scene illumination for white balance.

static Int

The camera device's auto-white balance routine is disabled; the camera device uses fluorescent light as the assumed scene illumination for white balance.

static Int

The camera device's auto-white balance routine is disabled; the camera device uses incandescent light as the assumed scene illumination for white balance.

static Int

The camera device's auto-white balance routine is disabled.

static Int

The camera device's auto-white balance routine is disabled; the camera device uses shade light as the assumed scene illumination for white balance.

static Int

The camera device's auto-white balance routine is disabled; the camera device uses twilight light as the assumed scene illumination for white balance.

static Int

The camera device's auto-white balance routine is disabled; the camera device uses warm fluorescent light as the assumed scene illumination for white balance.

static Int

AWB has a good set of control values for the current scene.

static Int

AWB is not in auto mode, or has not yet started metering.

static Int

AWB has been locked.

static Int

AWB doesn't yet have a good set of control values for the current scene.

static Int

The goal of this request doesn't fall into the other categories.

static Int

This request is for manual capture use case where the applications want to directly control the capture parameters.

static Int

This request is for a motion tracking use case, where the application will use camera and inertial sensor data to locate and track objects in the world.

static Int

This request is for a preview-like use case.

static Int

This request is for a still capture-type use case.

static Int

This request is for a video recording use case.

static Int

This request is for a video snapshot (still image while recording video) use case.

static Int

This request is for a ZSL usecase; the application will stream full-resolution images and reprocess one or several later for a final capture.

static Int

An "aqua" effect where a blue hue is added to the image.

static Int

A "blackboard" effect where the image is typically displayed as regions of black, with white or grey details.

static Int

A "monocolor" effect where the image is mapped into a single color.

static Int

A "photo-negative" effect where the image's colors are inverted.

static Int

No color effect will be applied.

static Int

A "posterization" effect where the image uses discrete regions of tone rather than a continuous gradient of tones.

static Int

A "sepia" effect where the image is mapped into warm gray, red, and brown tones.

static Int

A "solarisation" effect (Sabattier effect) where the image is wholly or partially reversed in tone.

static Int

A "whiteboard" effect where the image is typically displayed as regions of white, with black or grey details.

static Int

Bokeh effect must not slow down capture rate relative to sensor raw output, and the effect is applied to all processed streams no larger than the maximum streaming dimension.

static Int

High quality bokeh mode is enabled for all non-raw streams (including YUV, JPEG, and IMPLEMENTATION_DEFINED) when capture intent is STILL_CAPTURE.

static Int

Extended scene mode is disabled.

static Int

The AE mode 'ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITY' is enabled and applied.

static Int

The AE mode 'ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITY' is enabled but not applied.

static Int

Use settings for each individual 3A routine.

static Int

Full application control of pipeline.

static Int

Same as OFF mode, except that this capture will not be used by camera device background auto-exposure, auto-white balance and auto-focus algorithms (3A) to update their statistics.

static Int

Use a specific extended scene mode.

static Int

Use a specific scene mode.

static Int

Optimized for photos of quickly moving objects.

static Int

Optimized for accurately capturing a photo of barcode for use by camera applications that wish to read the barcode value.

static Int

Optimized for bright, outdoor beach settings.

static Int

Optimized for dim settings where the main light source is a candle.

static Int

Indicates that no scene modes are set for a given capture request.

static Int

If face detection support exists, use face detection data for auto-focus, auto-white balance, and auto-exposure routines.

static Int

Optimized for nighttime photos of fireworks.

static Int

Turn on a device-specific high dynamic range (HDR) mode.

static Int

This is deprecated, please use android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession and android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList for high speed video recording.

static Int

Optimized for photos of distant macroscopic objects.

static Int

Optimized for low-light settings.

static Int

Optimized for still photos of people in low-light settings.

static Int

Optimized for dim, indoor settings with multiple moving people.

static Int

Optimized for still photos of people.

static Int

Optimized for bright, outdoor settings containing snow.

static Int

Optimized for photos of quickly moving people.

static Int

Optimized to avoid blurry photos due to small amounts of device motion (for example: due to hand shake).

static Int

Optimized for scenes of the setting sun.

static Int

Optimized for dim, indoor settings where flash must remain off.

static Int

No keys are applied sooner than the other keys when applying CaptureRequest settings to the camera device.

static Int

Zoom related keys are applied sooner than the other keys in the CaptureRequest.

static Int

Video stabilization is disabled.

static Int

Video stabilization is enabled.

static Int

Preview stabilization, where the preview in addition to all other non-RAW streams are stabilized with the same quality of stabilization, is enabled.

static Int

Lens distortion correction is applied without reducing frame rate relative to sensor output.

static Int

High-quality distortion correction is applied, at the cost of possibly reduced frame rate relative to sensor output.

static Int

No distortion correction is applied.

static Int

Apply edge enhancement at a quality level that does not slow down frame rate relative to sensor output.

static Int

Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.

static Int

No edge enhancement is applied.

static Int

Edge enhancement is applied at different levels for different output streams, based on resolution.

static Int

Do not fire the flash for this capture.

static Int

If the flash is available and charged, fire flash for this capture.

static Int

Transition flash to continuously on.

static Int

Flash is charging and cannot be fired.

static Int

Flash fired for this capture.

static Int

Flash partially illuminated this frame.

static Int

Flash is ready to fire.

static Int

No flash on camera.

static Int

Hot pixel correction is applied, without reducing frame rate relative to sensor raw output.

static Int

High-quality hot pixel correction is applied, at a cost of possibly reduced frame rate relative to sensor raw output.

static Int

No hot pixel correction is applied.

static Int

This camera device is capable of YUV reprocessing and RAW data capture, in addition to FULL-level capabilities.

static Int

This camera device is backed by an external camera connected to this Android device.

static Int

This camera device is capable of supporting advanced imaging applications.

static Int

This camera device is running in backward compatibility mode.

static Int

This camera device does not have enough capabilities to qualify as a FULL device or better.

static Int

The camera device faces the opposite direction as the device's screen.

static Int

The camera device is an external camera, and has no fixed facing relative to the device's screen.

static Int

The camera device faces the same direction as the device's screen.

static Int

The lens focus distance is measured in diopters.

static Int

The lens focus distance is measured in diopters, and is calibrated.

static Int

The lens focus distance is not accurate, and the units used for android.lens.focusDistance do not correspond to any physical units.

static Int

Optical stabilization is unavailable.

static Int

Optical stabilization is enabled.

static Int

The value of android.lens.poseTranslation is relative to the origin of the automotive sensor coordinate system, which is at the center of the rear axle.

static Int

The value of android.lens.poseTranslation is relative to the position of the primary gyroscope of this Android device.

static Int

The value of android.lens.poseTranslation is relative to the optical center of the largest camera device facing the same direction as this camera.

static Int

The camera device cannot represent the values of android.lens.poseTranslation and android.lens.poseRotation accurately enough.

static Int

One or several of the lens parameters (android.lens.focalLength, android.lens.focusDistance, android.lens.filterDensity or android.lens.aperture) is currently changing.

static Int

The lens parameters (android.lens.focalLength, android.lens.focusDistance, android.lens.filterDensity and android.lens.aperture) are not changing.

static Int

A software mechanism is used to synchronize between the physical cameras.

static Int

The camera device supports frame timestamp synchronization at the hardware level, and the timestamp of a physical stream image accurately reflects its start-of-exposure time.

static Int

Noise reduction is applied without reducing frame rate relative to sensor output.

static Int

High-quality noise reduction is applied, at the cost of possibly reduced frame rate relative to sensor output.

static Int

MINIMAL noise reduction is applied without reducing frame rate relative to sensor output.

static Int

No noise reduction is applied.

static Int

Noise reduction is applied at different levels for different output streams, based on resolution.

static Int

The minimal set of capabilities that every camera device (regardless of android.info.supportedHardwareLevel) supports.

static Int

The camera device supports capturing high-resolution images at >= 20 frames per second, in at least the uncompressed YUV format, when post-processing settings are set to FAST.

static Int

The device supports querying the possible combinations of color spaces, image formats, and dynamic range profiles supported by the camera and requesting a particular color space for a session via android.hardware.camera2.params.SessionConfiguration#setColorSpace.

static Int

The device supports constrained high speed video recording (frame rate >=120fps) use case.

static Int

The camera device can produce depth measurements from its field of view.

static Int

The device supports one or more 10-bit camera outputs according to the dynamic range profiles specified in android.hardware.camera2.params.DynamicRangeProfiles#getSupportedProfiles.

static Int

The camera device is a logical camera backed by two or more physical cameras.

static Int

The camera device post-processing stages can be manually controlled.

static Int

The camera device can be manually controlled (3A algorithms such as auto-exposure, and auto-focus can be bypassed).

static Int

The camera device is a monochrome camera that doesn't contain a color filter array, and for YUV_420_888 stream, the pixel values on U and V planes are all 128.

static Int

The camera device supports the MOTION_TRACKING value for android.control.captureIntent, which limits maximum exposure time to 20 ms.

static Int

The camera device supports the OFFLINE_PROCESSING use case.

static Int

The camera device supports the Zero Shutter Lag reprocessing use case.

static Int

The camera device supports outputting RAW buffers and metadata for interpreting them.

static Int

The camera device supports accurately reporting the sensor settings for many of the sensor controls while the built-in 3A algorithm is running.

static Int

The device supports reprocessing from the RAW_SENSOR format with a bayer pattern given by android.sensor.info.binningFactor (m x n group of pixels with the same color filter) to a remosaiced regular bayer pattern.

static Int

The camera device is capable of writing image data into a region of memory inaccessible to Android userspace or the Android kernel, and only accessible to trusted execution environments (TEE).

static Int

The camera device supports selecting a per-stream use case via android.hardware.camera2.params.OutputConfiguration#setStreamUseCase so that the device can optimize camera pipeline parameters such as tuning, sensor mode, or ISP settings for a specific user scenario.

static Int

The camera device is only accessible by Android's system components and privileged applications.

static Int

This camera device is capable of producing ultra high resolution images in addition to the image sizes described in the android.scaler.streamConfigurationMap.

static Int

The camera device supports the YUV_420_888 reprocessing use case, similar as PRIVATE_REPROCESSING, This capability requires the camera device to support the following:

static Int

Cropped RAW stream when the client chooses to crop the field of view.

static Int

Default stream use case.

static Int

Live stream shown to the user.

static Int

One single stream used for combined purposes of preview, video, and still capture.

static Int

Still photo capture.

static Int

Long-running video call optimized for both power efficiency and video quality.

static Int

Recording video clips.

static Int

The camera device only supports centered crop regions.

static Int

The camera device supports arbitrarily chosen crop regions.

static Int

Processed images are rotated by 180 degrees.

static Int

Processed images are rotated by 270 degrees clockwise, and then cropped to the original aspect ratio.

static Int

Processed images are rotated by 90 degrees clockwise, and then cropped to the original aspect ratio.

static Int

The camera API automatically selects the best concrete value for rotate-and-crop based on the application's support for resizability and the current multi-window mode.

static Int

No rotate and crop is applied.

static Int

static Int

static Int

static Int

Sensor doesn't have any Bayer color filter.

static Int

Sensor has a near infrared filter capturing light with wavelength between roughly 750nm and 1400nm, and the same filter covers the whole sensor array.

static Int

Sensor is not Bayer; output has 3 16-bit values for each pixel, instead of just 1 16-bit value per pixel.

static Int

static Int

Timestamps from android.sensor.timestamp are in the same timebase as android.os.SystemClock#elapsedRealtimeNanos, and they can be compared to other timestamps using that base.

static Int

Timestamps from android.sensor.timestamp are in nanoseconds and monotonic, but can not be compared to timestamps from other subsystems (e.g. accelerometer, gyro etc.), or other instances of the same or different camera devices in the same system with accuracy.

static Int

This is the default sensor pixel mode.

static Int

In this mode, sensors typically do not bin pixels, as a result can offer larger image sizes.

static Int

This camera device supports the onReadoutStarted callback as well as outputting readout timestamps.

static Int

This camera device doesn't support readout timestamp and onReadoutStarted callback.

static Int

static Int

W 3900 - 4500K

static Int

static Int

static Int

static Int

static Int

static Int

D 5700 - 7100K

static Int

N 4600 - 5400K

static Int

static Int

static Int

static Int

static Int

static Int

static Int

static Int

static Int

Incandescent light

static Int

WW 3200 - 3700K

static Int

All pixel data is replaced with an 8-bar color pattern.

static Int

The test pattern is similar to COLOR_BARS, except that each bar should start at its specified color at the top, and fade to gray at the bottom.

static Int

The first custom test pattern.

static Int

No test pattern mode is used, and the camera device returns captures from the image sensor.

static Int

All pixel data is replaced by a pseudo-random sequence generated from a PN9 512-bit sequence (typically implemented in hardware with a linear feedback shift register).

static Int

Each pixel in [R, G_even, G_odd, B] is replaced by its respective color channel provided in android.sensor.testPatternData.

static Int

Apply lens shading corrections, without slowing frame rate relative to sensor raw output

static Int

Apply high-quality lens shading correction, at the cost of possibly reduced frame rate.

static Int

No lens shading correction is applied.

static Int

Return all face metadata.

static Int

Do not include face detection statistics in capture results.

static Int

Return face rectangle and confidence values only.

static Int

Do not include a lens shading map in the capture result.

static Int

Include a lens shading map in the capture result.

static Int

Do not include OIS data in the capture result.

static Int

Include OIS data in the capture result.

static Int

The camera device detects illumination flickering at 50Hz in the current scene.

static Int

The camera device detects illumination flickering at 60Hz in the current scene.

static Int

The camera device does not detect any flickering illumination in the current scene.

static Int

Every frame has the requests immediately applied.

static Int

Each new frame has some subset (potentially the entire set) of the past requests applied to the camera settings.

static Int

Use the tone mapping curve specified in the android.tonemap.curve* entries.

static Int

Advanced gamma mapping and color enhancement may be applied, without reducing frame rate compared to raw sensor output.

static Int

Use the gamma value specified in android.tonemap.gamma to perform tonemapping.

static Int

High-quality gamma mapping and color enhancement will be applied, at the cost of possibly reduced frame rate compared to raw sensor output.

static Int

Use the preset tonemapping curve specified in android.tonemap.presetCurve to perform tonemapping.

static Int

Tonemapping curve is defined by ITU-R BT.

static Int

Tonemapping curve is defined by sRGB

Public methods
open MutableList<TKey>

Returns a list of the keys contained in this map.

Constants

AUTOMOTIVE_LENS_FACING_EXTERIOR_FRONT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_EXTERIOR_FRONT: Int

The camera device faces the front of the vehicle body frame.

Value: 1

AUTOMOTIVE_LENS_FACING_EXTERIOR_LEFT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_EXTERIOR_LEFT: Int

The camera device faces the left side of the vehicle body frame.

Value: 3

AUTOMOTIVE_LENS_FACING_EXTERIOR_OTHER

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_EXTERIOR_OTHER: Int

The camera device faces the outside of the vehicle body frame but not exactly one of the exterior sides defined by this enum. Applications should determine the exact facing direction from android.lens.poseRotation and android.lens.poseTranslation.

Value: 0

AUTOMOTIVE_LENS_FACING_EXTERIOR_REAR

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_EXTERIOR_REAR: Int

The camera device faces the rear of the vehicle body frame.

Value: 2

AUTOMOTIVE_LENS_FACING_EXTERIOR_RIGHT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_EXTERIOR_RIGHT: Int

The camera device faces the right side of the vehicle body frame.

Value: 4

AUTOMOTIVE_LENS_FACING_INTERIOR_OTHER

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_OTHER: Int

The camera device faces the inside of the vehicle body frame but not exactly one of seats described by this enum. Applications should determine the exact facing direction from android.lens.poseRotation and android.lens.poseTranslation.

Value: 5

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_1_CENTER

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_1_CENTER: Int

The camera device faces the center seat of the first row.

Value: 7

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_1_LEFT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_1_LEFT: Int

The camera device faces the left side seat of the first row.

Value: 6

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_1_RIGHT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_1_RIGHT: Int

The camera device faces the right seat of the first row.

Value: 8

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_2_CENTER

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_2_CENTER: Int

The camera device faces the center seat of the second row.

Value: 10

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_2_LEFT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_2_LEFT: Int

The camera device faces the left side seat of the second row.

Value: 9

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_2_RIGHT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_2_RIGHT: Int

The camera device faces the right side seat of the second row.

Value: 11

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_3_CENTER

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_3_CENTER: Int

The camera device faces the center seat of the third row.

Value: 13

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_3_LEFT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_3_LEFT: Int

The camera device faces the left side seat of the third row.

Value: 12

AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_3_RIGHT

Added in API level 33
static val AUTOMOTIVE_LENS_FACING_INTERIOR_SEAT_ROW_3_RIGHT: Int

The camera device faces the right seat of the third row.

Value: 14

AUTOMOTIVE_LOCATION_EXTERIOR_FRONT

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTERIOR_FRONT: Int

The camera device exists outside of the vehicle body frame and on its front side.

Value: 2

AUTOMOTIVE_LOCATION_EXTERIOR_LEFT

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTERIOR_LEFT: Int

The camera device exists outside and on left side of the vehicle body frame.

Value: 4

AUTOMOTIVE_LOCATION_EXTERIOR_OTHER

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTERIOR_OTHER: Int

The camera exists outside of the vehicle body frame but not exactly on one of the exterior locations this enum defines. The applications should determine the exact location from android.lens.poseTranslation.

Value: 1

AUTOMOTIVE_LOCATION_EXTERIOR_REAR

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTERIOR_REAR: Int

The camera device exists outside of the vehicle body frame and on its rear side.

Value: 3

AUTOMOTIVE_LOCATION_EXTERIOR_RIGHT

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTERIOR_RIGHT: Int

The camera device exists outside and on right side of the vehicle body frame.

Value: 5

AUTOMOTIVE_LOCATION_EXTRA_FRONT

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTRA_FRONT: Int

The camera device exists outside of the extra vehicle's body frame and on its front side.

Value: 7

AUTOMOTIVE_LOCATION_EXTRA_LEFT

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTRA_LEFT: Int

The camera device exists outside and on left side of the extra vehicle body.

Value: 9

AUTOMOTIVE_LOCATION_EXTRA_OTHER

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTRA_OTHER: Int

The camera device exists on an extra vehicle, such as the trailer, but not exactly on one of front, rear, left, or right side. Applications should determine the exact location from android.lens.poseTranslation.

Value: 6

AUTOMOTIVE_LOCATION_EXTRA_REAR

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTRA_REAR: Int

The camera device exists outside of the extra vehicle's body frame and on its rear side.

Value: 8

AUTOMOTIVE_LOCATION_EXTRA_RIGHT

Added in API level 33
static val AUTOMOTIVE_LOCATION_EXTRA_RIGHT: Int

The camera device exists outside and on right side of the extra vehicle body.

Value: 10

AUTOMOTIVE_LOCATION_INTERIOR

Added in API level 33
static val AUTOMOTIVE_LOCATION_INTERIOR: Int

The camera device exists inside of the vehicle cabin.

Value: 0

COLOR_CORRECTION_ABERRATION_MODE_FAST

Added in API level 21
static val COLOR_CORRECTION_ABERRATION_MODE_FAST: Int

Aberration correction will not slow down capture rate relative to sensor raw output.

Value: 1

COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY

Added in API level 21
static val COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY: Int

Aberration correction operates at improved quality but the capture rate might be reduced (relative to sensor raw output rate)

Value: 2

COLOR_CORRECTION_ABERRATION_MODE_OFF

Added in API level 21
static val COLOR_CORRECTION_ABERRATION_MODE_OFF: Int

No aberration correction is applied.

Value: 0

COLOR_CORRECTION_MODE_FAST

Added in API level 21
static val COLOR_CORRECTION_MODE_FAST: Int

Color correction processing must not slow down capture rate relative to sensor raw output.

Advanced white balance adjustments above and beyond the specified white balance pipeline may be applied.

If AWB is enabled with android.control.awbMode != OFF, then the camera device uses the last frame's AWB values (or defaults if AWB has never been run).

Value: 1

COLOR_CORRECTION_MODE_HIGH_QUALITY

Added in API level 21
static val COLOR_CORRECTION_MODE_HIGH_QUALITY: Int

Color correction processing operates at improved quality but the capture rate might be reduced (relative to sensor raw output rate)

Advanced white balance adjustments above and beyond the specified white balance pipeline may be applied.

If AWB is enabled with android.control.awbMode != OFF, then the camera device uses the last frame's AWB values (or defaults if AWB has never been run).

Value: 2

COLOR_CORRECTION_MODE_TRANSFORM_MATRIX

Added in API level 21
static val COLOR_CORRECTION_MODE_TRANSFORM_MATRIX: Int

Use the android.colorCorrection.transform matrix and android.colorCorrection.gains to do color conversion.

All advanced white balance adjustments (not specified by our white balance pipeline) must be disabled.

If AWB is enabled with android.control.awbMode != OFF, then TRANSFORM_MATRIX is ignored. The camera device will override this value to either FAST or HIGH_QUALITY.

Value: 0

CONTROL_AE_ANTIBANDING_MODE_50HZ

Added in API level 21
static val CONTROL_AE_ANTIBANDING_MODE_50HZ: Int

The camera device will adjust exposure duration to avoid banding problems with 50Hz illumination sources.

Value: 1

CONTROL_AE_ANTIBANDING_MODE_60HZ

Added in API level 21
static val CONTROL_AE_ANTIBANDING_MODE_60HZ: Int

The camera device will adjust exposure duration to avoid banding problems with 60Hz illumination sources.

Value: 2

CONTROL_AE_ANTIBANDING_MODE_AUTO

Added in API level 21
static val CONTROL_AE_ANTIBANDING_MODE_AUTO: Int

The camera device will automatically adapt its antibanding routine to the current illumination condition. This is the default mode if AUTO is available on given camera device.

Value: 3

CONTROL_AE_ANTIBANDING_MODE_OFF

Added in API level 21
static val CONTROL_AE_ANTIBANDING_MODE_OFF: Int

The camera device will not adjust exposure duration to avoid banding problems.

Value: 0

CONTROL_AE_MODE_OFF

Added in API level 21
static val CONTROL_AE_MODE_OFF: Int

The camera device's autoexposure routine is disabled.

The application-selected android.sensor.exposureTime, android.sensor.sensitivity and android.sensor.frameDuration are used by the camera device, along with android.flash.* fields, if there's a flash unit for this camera device.

Note that auto-white balance (AWB) and auto-focus (AF) behavior is device dependent when AE is in OFF mode. To have consistent behavior across different devices, it is recommended to either set AWB and AF to OFF mode or lock AWB and AF before setting AE to OFF. See android.control.awbMode, android.control.afMode, android.control.awbLock, and android.control.afTrigger for more details.

LEGACY devices do not support the OFF mode and will override attempts to use this value to ON.

Value: 0

CONTROL_AE_MODE_ON

Added in API level 21
static val CONTROL_AE_MODE_ON: Int

The camera device's autoexposure routine is active, with no flash control.

The application's values for android.sensor.exposureTime, android.sensor.sensitivity, and android.sensor.frameDuration are ignored. The application has control over the various android.flash.* fields.

Value: 1

CONTROL_AE_MODE_ON_ALWAYS_FLASH

Added in API level 21
static val CONTROL_AE_MODE_ON_ALWAYS_FLASH: Int

Like ON, except that the camera device also controls the camera's flash unit, always firing it for still captures.

The flash may be fired during a precapture sequence (triggered by android.control.aePrecaptureTrigger) and will always be fired for captures for which the android.control.captureIntent field is set to STILL_CAPTURE

Value: 3

CONTROL_AE_MODE_ON_AUTO_FLASH

Added in API level 21
static val CONTROL_AE_MODE_ON_AUTO_FLASH: Int

Like ON, except that the camera device also controls the camera's flash unit, firing it in low-light conditions.

The flash may be fired during a precapture sequence (triggered by android.control.aePrecaptureTrigger) and may be fired for captures for which the android.control.captureIntent field is set to STILL_CAPTURE

Value: 2

CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE

Added in API level 21
static val CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE: Int

Like ON_AUTO_FLASH, but with automatic red eye reduction.

If deemed necessary by the camera device, a red eye reduction flash will fire during the precapture sequence.

Value: 4

CONTROL_AE_MODE_ON_EXTERNAL_FLASH

Added in API level 28
static val CONTROL_AE_MODE_ON_EXTERNAL_FLASH: Int

An external flash has been turned on.

It informs the camera device that an external flash has been turned on, and that metering (and continuous focus if active) should be quickly recalculated to account for the external flash. Otherwise, this mode acts like ON.

When the external flash is turned off, AE mode should be changed to one of the other available AE modes.

If the camera device supports AE external flash mode, android.control.aeState must be FLASH_REQUIRED after the camera device finishes AE scan and it's too dark without flash.

Value: 5

CONTROL_AE_MODE_ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITY

Added in API level 35
static val CONTROL_AE_MODE_ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITY: Int

Like 'ON' but applies additional brightness boost in low light scenes.

When the scene lighting conditions are within the range defined by android.control.lowLightBoostInfoLuminanceRange this mode will apply additional brightness boost.

This mode will automatically adjust the intensity of low light boost applied according to the scene lighting conditions. A darker scene will receive more boost while a brighter scene will receive less boost.

This mode can ignore the set target frame rate to allow more light to be captured which can result in choppier motion. The frame rate can extend to lower than the android.control.aeAvailableTargetFpsRanges but will not go below 10 FPS. This mode can also increase the sensor sensitivity gain which can result in increased luma and chroma noise. The sensor sensitivity gain can extend to higher values beyond android.sensor.info.sensitivityRange. This mode may also apply additional processing to recover details in dark and bright areas of the image,and noise reduction at high sensitivity gain settings to manage the trade-off between light sensitivity and capture noise.

This mode is restricted to two output surfaces. One output surface type can either be SurfaceView or TextureView. Another output surface type can either be MediaCodec or MediaRecorder. This mode cannot be used with a target FPS range higher than 30 FPS.

If the session configuration is not supported, the AE mode reported in the CaptureResult will be 'ON' instead of 'ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITY'.

When this AE mode is enabled, the CaptureResult field android.control.lowLightBoostState will indicate when low light boost is 'ACTIVE' or 'INACTIVE'. By default android.control.lowLightBoostState will be 'INACTIVE'.

The low light boost is 'ACTIVE' once the scene lighting condition is less than the upper bound lux value defined by android.control.lowLightBoostInfoLuminanceRange. This mode will be 'INACTIVE' once the scene lighting condition is greater than the upper bound lux value defined by android.control.lowLightBoostInfoLuminanceRange.

Value: 6

CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL

Added in API level 23
static val CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL: Int

The camera device will cancel any currently active or completed precapture metering sequence, the auto-exposure routine will return to its initial state.

Value: 2

CONTROL_AE_PRECAPTURE_TRIGGER_IDLE

Added in API level 21
static val CONTROL_AE_PRECAPTURE_TRIGGER_IDLE: Int

The trigger is idle.

Value: 0

CONTROL_AE_PRECAPTURE_TRIGGER_START

Added in API level 21
static val CONTROL_AE_PRECAPTURE_TRIGGER_START: Int

The precapture metering sequence will be started by the camera device.

The exact effect of the precapture trigger depends on the current AE mode and state.

Value: 1

CONTROL_AE_STATE_CONVERGED

Added in API level 21
static val CONTROL_AE_STATE_CONVERGED: Int

AE has a good set of control values for the current scene.

Value: 2

CONTROL_AE_STATE_FLASH_REQUIRED

Added in API level 21
static val CONTROL_AE_STATE_FLASH_REQUIRED: Int

AE has a good set of control values, but flash needs to be fired for good quality still capture.

Value: 4

CONTROL_AE_STATE_INACTIVE

Added in API level 21
static val CONTROL_AE_STATE_INACTIVE: Int

AE is off or recently reset.

When a camera device is opened, it starts in this state. This is a transient state, the camera device may skip reporting this state in capture result.

Value: 0

CONTROL_AE_STATE_LOCKED

Added in API level 21
static val CONTROL_AE_STATE_LOCKED: Int

AE has been locked.

Value: 3

CONTROL_AE_STATE_PRECAPTURE

Added in API level 21
static val CONTROL_AE_STATE_PRECAPTURE: Int

AE has been asked to do a precapture sequence and is currently executing it.

Precapture can be triggered through setting android.control.aePrecaptureTrigger to START. Currently active and completed (if it causes camera device internal AE lock) precapture metering sequence can be canceled through setting android.control.aePrecaptureTrigger to CANCEL.

Once PRECAPTURE completes, AE will transition to CONVERGED or FLASH_REQUIRED as appropriate. This is a transient state, the camera device may skip reporting this state in capture result.

Value: 5

CONTROL_AE_STATE_SEARCHING

Added in API level 21
static val CONTROL_AE_STATE_SEARCHING: Int

AE doesn't yet have a good set of control values for the current scene.

This is a transient state, the camera device may skip reporting this state in capture result.

Value: 1

CONTROL_AF_MODE_AUTO

Added in API level 21
static val CONTROL_AF_MODE_AUTO: Int

Basic automatic focus mode.

In this mode, the lens does not move unless the autofocus trigger action is called. When that trigger is activated, AF will transition to ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or NOT_FOCUSED).

Always supported if lens is not fixed focus.

Use android.lens.info.minimumFocusDistance to determine if lens is fixed-focus.

Triggering AF_CANCEL resets the lens position to default, and sets the AF state to INACTIVE.

Value: 1

CONTROL_AF_MODE_CONTINUOUS_PICTURE

Added in API level 21
static val CONTROL_AF_MODE_CONTINUOUS_PICTURE: Int

In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.

The focusing behavior should be suitable for still image capture; typically this means focusing as fast as possible. When the AF trigger is not involved, the AF algorithm should start in INACTIVE state, and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as appropriate as it attempts to maintain focus. When the AF trigger is activated, the algorithm should finish its PASSIVE_SCAN if active, and then transition into AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the lens position until a cancel AF trigger is received.

When the AF cancel trigger is activated, the algorithm should transition back to INACTIVE and then act as if it has just been started.

Value: 4

CONTROL_AF_MODE_CONTINUOUS_VIDEO

Added in API level 21
static val CONTROL_AF_MODE_CONTINUOUS_VIDEO: Int

In this mode, the AF algorithm modifies the lens position continually to attempt to provide a constantly-in-focus image stream.

The focusing behavior should be suitable for good quality video recording; typically this means slower focus movement and no overshoots. When the AF trigger is not involved, the AF algorithm should start in INACTIVE state, and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as appropriate. When the AF trigger is activated, the algorithm should immediately transition into AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the lens position until a cancel AF trigger is received.

Once cancel is received, the algorithm should transition back to INACTIVE and resume passive scan. Note that this behavior is not identical to CONTINUOUS_PICTURE, since an ongoing PASSIVE_SCAN must immediately be canceled.

Value: 3

CONTROL_AF_MODE_EDOF

Added in API level 21
static val CONTROL_AF_MODE_EDOF: Int

Extended depth of field (digital focus) mode.

The camera device will produce images with an extended depth of field automatically; no special focusing operations need to be done before taking a picture.

AF triggers are ignored, and the AF state will always be INACTIVE.

Value: 5

CONTROL_AF_MODE_MACRO

Added in API level 21
static val CONTROL_AF_MODE_MACRO: Int

Close-up focusing mode.

In this mode, the lens does not move unless the autofocus trigger action is called. When that trigger is activated, AF will transition to ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or NOT_FOCUSED). This mode is optimized for focusing on objects very close to the camera.

When that trigger is activated, AF will transition to ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or NOT_FOCUSED). Triggering cancel AF resets the lens position to default, and sets the AF state to INACTIVE.

Value: 2

CONTROL_AF_MODE_OFF

Added in API level 21
static val CONTROL_AF_MODE_OFF: Int

The auto-focus routine does not control the lens; android.lens.focusDistance is controlled by the application.

Value: 0

CONTROL_AF_SCENE_CHANGE_DETECTED

Added in API level 28
static val CONTROL_AF_SCENE_CHANGE_DETECTED: Int

Scene change is detected within the AF region(s).

Value: 1

CONTROL_AF_SCENE_CHANGE_NOT_DETECTED

Added in API level 28
static val CONTROL_AF_SCENE_CHANGE_NOT_DETECTED: Int

Scene change is not detected within the AF region(s).

Value: 0

CONTROL_AF_STATE_ACTIVE_SCAN

Added in API level 21
static val CONTROL_AF_STATE_ACTIVE_SCAN: Int

AF is performing an AF scan because it was triggered by AF trigger.

Only used by AUTO or MACRO AF modes. This is a transient state, the camera device may skip reporting this state in capture result.

Value: 3

CONTROL_AF_STATE_FOCUSED_LOCKED

Added in API level 21
static val CONTROL_AF_STATE_FOCUSED_LOCKED: Int

AF believes it is focused correctly and has locked focus.

This state is reached only after an explicit START AF trigger has been sent (android.control.afTrigger), when good focus has been obtained.

The lens will remain stationary until the AF mode (android.control.afMode) is changed or a new AF trigger is sent to the camera device (android.control.afTrigger).

Value: 4

CONTROL_AF_STATE_INACTIVE

Added in API level 21
static val CONTROL_AF_STATE_INACTIVE: Int

AF is off or has not yet tried to scan/been asked to scan.

When a camera device is opened, it starts in this state. This is a transient state, the camera device may skip reporting this state in capture result.

Value: 0

CONTROL_AF_STATE_NOT_FOCUSED_LOCKED

Added in API level 21
static val CONTROL_AF_STATE_NOT_FOCUSED_LOCKED: Int

AF has failed to focus successfully and has locked focus.

This state is reached only after an explicit START AF trigger has been sent (android.control.afTrigger), when good focus cannot be obtained.

The lens will remain stationary until the AF mode (android.control.afMode) is changed or a new AF trigger is sent to the camera device (android.control.afTrigger).

Value: 5

CONTROL_AF_STATE_PASSIVE_FOCUSED

Added in API level 21
static val CONTROL_AF_STATE_PASSIVE_FOCUSED: Int

AF currently believes it is in focus, but may restart scanning at any time.

Only used by CONTINUOUS_* AF modes. This is a transient state, the camera device may skip reporting this state in capture result.

Value: 2

CONTROL_AF_STATE_PASSIVE_SCAN

Added in API level 21
static val CONTROL_AF_STATE_PASSIVE_SCAN: Int

AF is currently performing an AF scan initiated the camera device in a continuous autofocus mode.

Only used by CONTINUOUS_* AF modes. This is a transient state, the camera device may skip reporting this state in capture result.

Value: 1

CONTROL_AF_STATE_PASSIVE_UNFOCUSED

Added in API level 21
static val CONTROL_AF_STATE_PASSIVE_UNFOCUSED: Int

AF finished a passive scan without finding focus, and may restart scanning at any time.

Only used by CONTINUOUS_* AF modes. This is a transient state, the camera device may skip reporting this state in capture result.

LEGACY camera devices do not support this state. When a passive scan has finished, it will always go to PASSIVE_FOCUSED.

Value: 6

CONTROL_AF_TRIGGER_CANCEL

Added in API level 21
static val CONTROL_AF_TRIGGER_CANCEL: Int

Autofocus will return to its initial state, and cancel any currently active trigger.

Value: 2

CONTROL_AF_TRIGGER_IDLE

Added in API level 21
static val CONTROL_AF_TRIGGER_IDLE: Int

The trigger is idle.

Value: 0

CONTROL_AF_TRIGGER_START

Added in API level 21
static val CONTROL_AF_TRIGGER_START: Int

Autofocus will trigger now.

Value: 1

CONTROL_AUTOFRAMING_OFF

Added in API level 34
static val CONTROL_AUTOFRAMING_OFF: Int

Disable autoframing.

Value: 0

CONTROL_AUTOFRAMING_ON

Added in API level 34
static val CONTROL_AUTOFRAMING_ON: Int

Enable autoframing to keep people in the frame's field of view.

Value: 1

CONTROL_AUTOFRAMING_STATE_CONVERGED

Added in API level 34
static val CONTROL_AUTOFRAMING_STATE_CONVERGED: Int

Auto-framing has reached a stable state (frame/fov is not being adjusted). The state may transition back to FRAMING if the scene changes.

Value: 2

CONTROL_AUTOFRAMING_STATE_FRAMING

Added in API level 34
static val CONTROL_AUTOFRAMING_STATE_FRAMING: Int

Auto-framing is in process - either zooming in, zooming out or pan is taking place.

Value: 1

CONTROL_AUTOFRAMING_STATE_INACTIVE

Added in API level 34
static val CONTROL_AUTOFRAMING_STATE_INACTIVE: Int

Auto-framing is inactive.

Value: 0

CONTROL_AWB_MODE_AUTO

Added in API level 21
static val CONTROL_AWB_MODE_AUTO: Int

The camera device's auto-white balance routine is active.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

Value: 1

CONTROL_AWB_MODE_CLOUDY_DAYLIGHT

Added in API level 21
static val CONTROL_AWB_MODE_CLOUDY_DAYLIGHT: Int

The camera device's auto-white balance routine is disabled; the camera device uses cloudy daylight light as the assumed scene illumination for white balance.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

Value: 6

CONTROL_AWB_MODE_DAYLIGHT

Added in API level 21
static val CONTROL_AWB_MODE_DAYLIGHT: Int

The camera device's auto-white balance routine is disabled; the camera device uses daylight light as the assumed scene illumination for white balance.

While the exact white balance transforms are up to the camera device, they will approximately match the CIE standard illuminant D65.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

Value: 5

CONTROL_AWB_MODE_FLUORESCENT

Added in API level 21
static val CONTROL_AWB_MODE_FLUORESCENT: Int

The camera device's auto-white balance routine is disabled; the camera device uses fluorescent light as the assumed scene illumination for white balance.

While the exact white balance transforms are up to the camera device, they will approximately match the CIE standard illuminant F2.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

Value: 3

CONTROL_AWB_MODE_INCANDESCENT

Added in API level 21
static val CONTROL_AWB_MODE_INCANDESCENT: Int

The camera device's auto-white balance routine is disabled; the camera device uses incandescent light as the assumed scene illumination for white balance.

While the exact white balance transforms are up to the camera device, they will approximately match the CIE standard illuminant A.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

Value: 2

CONTROL_AWB_MODE_OFF

Added in API level 21
static val CONTROL_AWB_MODE_OFF: Int

The camera device's auto-white balance routine is disabled.

The application-selected color transform matrix (android.colorCorrection.transform) and gains (android.colorCorrection.gains) are used by the camera device for manual white balance control.

Value: 0

CONTROL_AWB_MODE_SHADE

Added in API level 21
static val CONTROL_AWB_MODE_SHADE: Int

The camera device's auto-white balance routine is disabled; the camera device uses shade light as the assumed scene illumination for white balance.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

Value: 8

CONTROL_AWB_MODE_TWILIGHT

Added in API level 21
static val CONTROL_AWB_MODE_TWILIGHT: Int

The camera device's auto-white balance routine is disabled; the camera device uses twilight light as the assumed scene illumination for white balance.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

Value: 7

CONTROL_AWB_MODE_WARM_FLUORESCENT

Added in API level 21
static val CONTROL_AWB_MODE_WARM_FLUORESCENT: Int

The camera device's auto-white balance routine is disabled; the camera device uses warm fluorescent light as the assumed scene illumination for white balance.

While the exact white balance transforms are up to the camera device, they will approximately match the CIE standard illuminant F4.

The application's values for android.colorCorrection.transform and android.colorCorrection.gains are ignored. For devices that support the MANUAL_POST_PROCESSING capability, the values used by the camera device for the transform and gains will be available in the capture result for this request.

Value: 4

CONTROL_AWB_STATE_CONVERGED

Added in API level 21
static val CONTROL_AWB_STATE_CONVERGED: Int

AWB has a good set of control values for the current scene.

Value: 2

CONTROL_AWB_STATE_INACTIVE

Added in API level 21
static val CONTROL_AWB_STATE_INACTIVE: Int

AWB is not in auto mode, or has not yet started metering.

When a camera device is opened, it starts in this state. This is a transient state, the camera device may skip reporting this state in capture result.

Value: 0

CONTROL_AWB_STATE_LOCKED

Added in API level 21
static val CONTROL_AWB_STATE_LOCKED: Int

AWB has been locked.

Value: 3

CONTROL_AWB_STATE_SEARCHING

Added in API level 21
static val CONTROL_AWB_STATE_SEARCHING: Int

AWB doesn't yet have a good set of control values for the current scene.

This is a transient state, the camera device may skip reporting this state in capture result.

Value: 1

CONTROL_CAPTURE_INTENT_CUSTOM

Added in API level 21
static val CONTROL_CAPTURE_INTENT_CUSTOM: Int

The goal of this request doesn't fall into the other categories. The camera device will default to preview-like behavior.

Value: 0

CONTROL_CAPTURE_INTENT_MANUAL

Added in API level 21
static val CONTROL_CAPTURE_INTENT_MANUAL: Int

This request is for manual capture use case where the applications want to directly control the capture parameters.

For example, the application may wish to manually control android.sensor.exposureTime, android.sensor.sensitivity, etc.

Value: 6

CONTROL_CAPTURE_INTENT_MOTION_TRACKING

Added in API level 28
static val CONTROL_CAPTURE_INTENT_MOTION_TRACKING: Int

This request is for a motion tracking use case, where the application will use camera and inertial sensor data to locate and track objects in the world.

The camera device auto-exposure routine will limit the exposure time of the camera to no more than 20 milliseconds, to minimize motion blur.

Value: 7

CONTROL_CAPTURE_INTENT_PREVIEW

Added in API level 21
static val CONTROL_CAPTURE_INTENT_PREVIEW: Int

This request is for a preview-like use case.

The precapture trigger may be used to start off a metering w/flash sequence.

Value: 1

CONTROL_CAPTURE_INTENT_STILL_CAPTURE

Added in API level 21
static val CONTROL_CAPTURE_INTENT_STILL_CAPTURE: Int

This request is for a still capture-type use case.

If the flash unit is under automatic control, it may fire as needed.

Value: 2

CONTROL_CAPTURE_INTENT_VIDEO_RECORD

Added in API level 21
static val CONTROL_CAPTURE_INTENT_VIDEO_RECORD: Int

This request is for a video recording use case.

Value: 3

CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT

Added in API level 21
static val CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT: Int

This request is for a video snapshot (still image while recording video) use case.

The camera device should take the highest-quality image possible (given the other settings) without disrupting the frame rate of video recording.

Value: 4

CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG

Added in API level 21
static val CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG: Int

This request is for a ZSL usecase; the application will stream full-resolution images and reprocess one or several later for a final capture.

Value: 5

CONTROL_EFFECT_MODE_AQUA

Added in API level 21
static val CONTROL_EFFECT_MODE_AQUA: Int

An "aqua" effect where a blue hue is added to the image.

Value: 8

CONTROL_EFFECT_MODE_BLACKBOARD

Added in API level 21
static val CONTROL_EFFECT_MODE_BLACKBOARD: Int

A "blackboard" effect where the image is typically displayed as regions of black, with white or grey details.

Value: 7

CONTROL_EFFECT_MODE_MONO

Added in API level 21
static val CONTROL_EFFECT_MODE_MONO: Int

A "monocolor" effect where the image is mapped into a single color.

This will typically be grayscale.

Value: 1

CONTROL_EFFECT_MODE_NEGATIVE

Added in API level 21
static val CONTROL_EFFECT_MODE_NEGATIVE: Int

A "photo-negative" effect where the image's colors are inverted.

Value: 2

CONTROL_EFFECT_MODE_OFF

Added in API level 21
static val CONTROL_EFFECT_MODE_OFF: Int

No color effect will be applied.

Value: 0

CONTROL_EFFECT_MODE_POSTERIZE

Added in API level 21
static val CONTROL_EFFECT_MODE_POSTERIZE: Int

A "posterization" effect where the image uses discrete regions of tone rather than a continuous gradient of tones.

Value: 5

CONTROL_EFFECT_MODE_SEPIA

Added in API level 21
static val CONTROL_EFFECT_MODE_SEPIA: Int

A "sepia" effect where the image is mapped into warm gray, red, and brown tones.

Value: 4

CONTROL_EFFECT_MODE_SOLARIZE

Added in API level 21
static val CONTROL_EFFECT_MODE_SOLARIZE: Int

A "solarisation" effect (Sabattier effect) where the image is wholly or partially reversed in tone.

Value: 3

CONTROL_EFFECT_MODE_WHITEBOARD

Added in API level 21
static val CONTROL_EFFECT_MODE_WHITEBOARD: Int

A "whiteboard" effect where the image is typically displayed as regions of white, with black or grey details.

Value: 6

CONTROL_EXTENDED_SCENE_MODE_BOKEH_CONTINUOUS

Added in API level 30
static val CONTROL_EXTENDED_SCENE_MODE_BOKEH_CONTINUOUS: Int

Bokeh effect must not slow down capture rate relative to sensor raw output, and the effect is applied to all processed streams no larger than the maximum streaming dimension. This mode should be used if performance and power are a priority, such as video recording.

Value: 2

CONTROL_EXTENDED_SCENE_MODE_BOKEH_STILL_CAPTURE

Added in API level 30
static val CONTROL_EXTENDED_SCENE_MODE_BOKEH_STILL_CAPTURE: Int

High quality bokeh mode is enabled for all non-raw streams (including YUV, JPEG, and IMPLEMENTATION_DEFINED) when capture intent is STILL_CAPTURE. Due to the extra image processing, this mode may introduce additional stall to non-raw streams. This mode should be used in high quality still capture use case.

Value: 1

CONTROL_EXTENDED_SCENE_MODE_DISABLED

Added in API level 30
static val CONTROL_EXTENDED_SCENE_MODE_DISABLED: Int

Extended scene mode is disabled.

Value: 0

CONTROL_LOW_LIGHT_BOOST_STATE_ACTIVE

Added in API level 35
static val CONTROL_LOW_LIGHT_BOOST_STATE_ACTIVE: Int

The AE mode 'ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITY' is enabled and applied.

Value: 1

CONTROL_LOW_LIGHT_BOOST_STATE_INACTIVE

Added in API level 35
static val CONTROL_LOW_LIGHT_BOOST_STATE_INACTIVE: Int

The AE mode 'ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITY' is enabled but not applied.

Value: 0

CONTROL_MODE_AUTO

Added in API level 21
static val CONTROL_MODE_AUTO: Int

Use settings for each individual 3A routine.

Manual control of capture parameters is disabled. All controls in android.control.* besides sceneMode take effect.

Value: 1

CONTROL_MODE_OFF

Added in API level 21
static val CONTROL_MODE_OFF: Int

Full application control of pipeline.

All control by the device's metering and focusing (3A) routines is disabled, and no other settings in android.control.* have any effect, except that android.control.captureIntent may be used by the camera device to select post-processing values for processing blocks that do not allow for manual control, or are not exposed by the camera API.

However, the camera device's 3A routines may continue to collect statistics and update their internal state so that when control is switched to AUTO mode, good control values can be immediately applied.

Value: 0

CONTROL_MODE_OFF_KEEP_STATE

Added in API level 21
static val CONTROL_MODE_OFF_KEEP_STATE: Int

Same as OFF mode, except that this capture will not be used by camera device background auto-exposure, auto-white balance and auto-focus algorithms (3A) to update their statistics.

Specifically, the 3A routines are locked to the last values set from a request with AUTO, OFF, or USE_SCENE_MODE, and any statistics or state updates collected from manual captures with OFF_KEEP_STATE will be discarded by the camera device.

Value: 3

CONTROL_MODE_USE_EXTENDED_SCENE_MODE

Added in API level 30
static val CONTROL_MODE_USE_EXTENDED_SCENE_MODE: Int

Use a specific extended scene mode.

When extended scene mode is on, the camera device may override certain control parameters, such as targetFpsRange, AE, AWB, and AF modes, to achieve best power and quality tradeoffs. Only the mandatory stream combinations of LIMITED hardware level are guaranteed.

This setting can only be used if extended scene mode is supported (i.e. android.control.availableExtendedSceneModes contains some modes other than DISABLED).

Value: 4

CONTROL_MODE_USE_SCENE_MODE

Added in API level 21
static val CONTROL_MODE_USE_SCENE_MODE: Int

Use a specific scene mode.

Enabling this disables control.aeMode, control.awbMode and control.afMode controls; the camera device will ignore those settings while USE_SCENE_MODE is active (except for FACE_PRIORITY scene mode). Other control entries are still active. This setting can only be used if scene mode is supported (i.e. android.control.availableSceneModes contain some modes other than DISABLED).

For extended scene modes such as BOKEH, please use USE_EXTENDED_SCENE_MODE instead.

Value: 2

CONTROL_SCENE_MODE_ACTION

Added in API level 21
static val CONTROL_SCENE_MODE_ACTION: Int

Optimized for photos of quickly moving objects.

Similar to SPORTS.

Value: 2

CONTROL_SCENE_MODE_BARCODE

Added in API level 21
static val CONTROL_SCENE_MODE_BARCODE: Int

Optimized for accurately capturing a photo of barcode for use by camera applications that wish to read the barcode value.

Value: 16

CONTROL_SCENE_MODE_BEACH

Added in API level 21
static val CONTROL_SCENE_MODE_BEACH: Int

Optimized for bright, outdoor beach settings.

Value: 8

CONTROL_SCENE_MODE_CANDLELIGHT

Added in API level 21
static val CONTROL_SCENE_MODE_CANDLELIGHT: Int

Optimized for dim settings where the main light source is a candle.

Value: 15

CONTROL_SCENE_MODE_DISABLED

Added in API level 21
static val CONTROL_SCENE_MODE_DISABLED: Int

Indicates that no scene modes are set for a given capture request.

Value: 0

CONTROL_SCENE_MODE_FACE_PRIORITY

Added in API level 21
static val CONTROL_SCENE_MODE_FACE_PRIORITY: Int

If face detection support exists, use face detection data for auto-focus, auto-white balance, and auto-exposure routines.

If face detection statistics are disabled (i.e. android.statistics.faceDetectMode is set to OFF), this should still operate correctly (but will not return face detection statistics to the framework).

Unlike the other scene modes, android.control.aeMode, android.control.awbMode, and android.control.afMode remain active when FACE_PRIORITY is set.

Value: 1

CONTROL_SCENE_MODE_FIREWORKS

Added in API level 21
static val CONTROL_SCENE_MODE_FIREWORKS: Int

Optimized for nighttime photos of fireworks.

Value: 12

CONTROL_SCENE_MODE_HDR

Added in API level 22
static val CONTROL_SCENE_MODE_HDR: Int

Turn on a device-specific high dynamic range (HDR) mode.

In this scene mode, the camera device captures images that keep a larger range of scene illumination levels visible in the final image. For example, when taking a picture of a object in front of a bright window, both the object and the scene through the window may be visible when using HDR mode, while in normal AUTO mode, one or the other may be poorly exposed. As a tradeoff, HDR mode generally takes much longer to capture a single image, has no user control, and may have other artifacts depending on the HDR method used.

Therefore, HDR captures operate at a much slower rate than regular captures.

In this mode, on LIMITED or FULL devices, when a request is made with a android.control.captureIntent of STILL_CAPTURE, the camera device will capture an image using a high dynamic range capture technique. On LEGACY devices, captures that target a JPEG-format output will be captured with HDR, and the capture intent is not relevant.

The HDR capture may involve the device capturing a burst of images internally and combining them into one, or it may involve the device using specialized high dynamic range capture hardware. In all cases, a single image is produced in response to a capture request submitted while in HDR mode.

Since substantial post-processing is generally needed to produce an HDR image, only YUV, PRIVATE, and JPEG outputs are supported for LIMITED/FULL device HDR captures, and only JPEG outputs are supported for LEGACY HDR captures. Using a RAW output for HDR capture is not supported.

Some devices may also support always-on HDR, which applies HDR processing at full frame rate. For these devices, intents other than STILL_CAPTURE will also produce an HDR output with no frame rate impact compared to normal operation, though the quality may be lower than for STILL_CAPTURE intents.

If SCENE_MODE_HDR is used with unsupported output types or capture intents, the images captured will be as if the SCENE_MODE was not enabled at all.

Value: 18

CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO

Added in API level 21
Deprecated in API level 23
static val CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO: Int

Deprecated: Please refer to this API documentation to find the alternatives

This is deprecated, please use android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession and android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList for high speed video recording.

Optimized for high speed video recording (frame rate >=60fps) use case.

The supported high speed video sizes and fps ranges are specified in android.control.availableHighSpeedVideoConfigurations. To get desired output frame rates, the application is only allowed to select video size and fps range combinations listed in this static metadata. The fps range can be control via android.control.aeTargetFpsRange.

In this mode, the camera device will override aeMode, awbMode, and afMode to ON, ON, and CONTINUOUS_VIDEO, respectively. All post-processing block mode controls will be overridden to be FAST. Therefore, no manual control of capture and post-processing parameters is possible. All other controls operate the same as when android.control.mode == AUTO. This means that all other android.control.* fields continue to work, such as

Outside of android.control.*, the following controls will work:

For high speed recording use case, the actual maximum supported frame rate may be lower than what camera can output, depending on the destination Surfaces for the image data. For example, if the destination surface is from video encoder, the application need check if the video encoder is capable of supporting the high frame rate for a given video size, or it will end up with lower recording frame rate. If the destination surface is from preview window, the preview frame rate will be bounded by the screen refresh rate.

The camera device will only support up to 2 output high speed streams (processed non-stalling format defined in android.request.maxNumOutputStreams) in this mode. This control will be effective only if all of below conditions are true:

  • The application created no more than maxNumHighSpeedStreams processed non-stalling format output streams, where maxNumHighSpeedStreams is calculated as min(2, android.request.maxNumOutputStreams[Processed (but not-stalling)]).
  • The stream sizes are selected from the sizes reported by android.control.availableHighSpeedVideoConfigurations.
  • No processed non-stalling or raw streams are configured.

When above conditions are NOT satisfied, the controls of this mode and android.control.aeTargetFpsRange will be ignored by the camera device, the camera device will fall back to android.control.mode == AUTO, and the returned capture result metadata will give the fps range chosen by the camera device.

Switching into or out of this mode may trigger some camera ISP/sensor reconfigurations, which may introduce extra latency. It is recommended that the application avoids unnecessary scene mode switch as much as possible.

Value: 17

See Also

CONTROL_SCENE_MODE_LANDSCAPE

Added in API level 21
static val CONTROL_SCENE_MODE_LANDSCAPE: Int

Optimized for photos of distant macroscopic objects.

Value: 4

CONTROL_SCENE_MODE_NIGHT

Added in API level 21
static val CONTROL_SCENE_MODE_NIGHT: Int

Optimized for low-light settings.

Value: 5

CONTROL_SCENE_MODE_NIGHT_PORTRAIT

Added in API level 21
static val CONTROL_SCENE_MODE_NIGHT_PORTRAIT: Int

Optimized for still photos of people in low-light settings.

Value: 6

CONTROL_SCENE_MODE_PARTY

Added in API level 21
static val CONTROL_SCENE_MODE_PARTY: Int

Optimized for dim, indoor settings with multiple moving people.

Value: 14

CONTROL_SCENE_MODE_PORTRAIT

Added in API level 21
static val CONTROL_SCENE_MODE_PORTRAIT: Int

Optimized for still photos of people.

Value: 3

CONTROL_SCENE_MODE_SNOW

Added in API level 21
static val CONTROL_SCENE_MODE_SNOW: Int

Optimized for bright, outdoor settings containing snow.

Value: 9

CONTROL_SCENE_MODE_SPORTS

Added in API level 21
static val CONTROL_SCENE_MODE_SPORTS: Int

Optimized for photos of quickly moving people.

Similar to ACTION.

Value: 13

CONTROL_SCENE_MODE_STEADYPHOTO

Added in API level 21
static val CONTROL_SCENE_MODE_STEADYPHOTO: Int

Optimized to avoid blurry photos due to small amounts of device motion (for example: due to hand shake).

Value: 11

CONTROL_SCENE_MODE_SUNSET

Added in API level 21
static val CONTROL_SCENE_MODE_SUNSET: Int

Optimized for scenes of the setting sun.

Value: 10

CONTROL_SCENE_MODE_THEATRE

Added in API level 21
static val CONTROL_SCENE_MODE_THEATRE: Int

Optimized for dim, indoor settings where flash must remain off.

Value: 7

CONTROL_SETTINGS_OVERRIDE_OFF

Added in API level 34
static val CONTROL_SETTINGS_OVERRIDE_OFF: Int

No keys are applied sooner than the other keys when applying CaptureRequest settings to the camera device. This is the default value.

Value: 0

CONTROL_SETTINGS_OVERRIDE_ZOOM

Added in API level 34
static val CONTROL_SETTINGS_OVERRIDE_ZOOM: Int

Zoom related keys are applied sooner than the other keys in the CaptureRequest. The zoom related keys are:

Even though android.control.aeRegions, android.control.awbRegions, and android.control.afRegions are not directly zoom related, applications typically scale these regions together with android.scaler.cropRegion to have a consistent mapping within the current field of view. In this aspect, they are related to android.scaler.cropRegion and android.control.zoomRatio.

Value: 1

CONTROL_VIDEO_STABILIZATION_MODE_OFF

Added in API level 21
static val CONTROL_VIDEO_STABILIZATION_MODE_OFF: Int

Video stabilization is disabled.

Value: 0

CONTROL_VIDEO_STABILIZATION_MODE_ON

Added in API level 21
static val CONTROL_VIDEO_STABILIZATION_MODE_ON: Int

Video stabilization is enabled.

Value: 1

CONTROL_VIDEO_STABILIZATION_MODE_PREVIEW_STABILIZATION

Added in API level 33
static val CONTROL_VIDEO_STABILIZATION_MODE_PREVIEW_STABILIZATION: Int

Preview stabilization, where the preview in addition to all other non-RAW streams are stabilized with the same quality of stabilization, is enabled. This mode aims to give clients a 'what you see is what you get' effect. In this mode, the FoV reduction will be a maximum of 20 % both horizontally and vertically (10% from left, right, top, bottom) for the given zoom ratio / crop region. The resultant FoV will also be the same across all processed streams (that have the same aspect ratio).

Value: 2

DISTORTION_CORRECTION_MODE_FAST

Added in API level 28
static val DISTORTION_CORRECTION_MODE_FAST: Int

Lens distortion correction is applied without reducing frame rate relative to sensor output. It may be the same as OFF if distortion correction would reduce frame rate relative to sensor.

Value: 1

DISTORTION_CORRECTION_MODE_HIGH_QUALITY

Added in API level 28
static val DISTORTION_CORRECTION_MODE_HIGH_QUALITY: Int

High-quality distortion correction is applied, at the cost of possibly reduced frame rate relative to sensor output.

Value: 2

DISTORTION_CORRECTION_MODE_OFF

Added in API level 28
static val DISTORTION_CORRECTION_MODE_OFF: Int

No distortion correction is applied.

Value: 0

EDGE_MODE_FAST

Added in API level 21
static val EDGE_MODE_FAST: Int

Apply edge enhancement at a quality level that does not slow down frame rate relative to sensor output. It may be the same as OFF if edge enhancement will slow down frame rate relative to sensor.

Value: 1

EDGE_MODE_HIGH_QUALITY

Added in API level 21
static val EDGE_MODE_HIGH_QUALITY: Int

Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.

Value: 2

EDGE_MODE_OFF

Added in API level 21
static val EDGE_MODE_OFF: Int

No edge enhancement is applied.

Value: 0

EDGE_MODE_ZERO_SHUTTER_LAG

Added in API level 23
static val EDGE_MODE_ZERO_SHUTTER_LAG: Int

Edge enhancement is applied at different levels for different output streams, based on resolution. Streams at maximum recording resolution (see android.hardware.camera2.CameraDevice#createCaptureSession) or below have edge enhancement applied, while higher-resolution streams have no edge enhancement applied. The level of edge enhancement for low-resolution streams is tuned so that frame rate is not impacted, and the quality is equal to or better than FAST (since it is only applied to lower-resolution outputs, quality may improve from FAST).

This mode is intended to be used by applications operating in a zero-shutter-lag mode with YUV or PRIVATE reprocessing, where the application continuously captures high-resolution intermediate buffers into a circular buffer, from which a final image is produced via reprocessing when a user takes a picture. For such a use case, the high-resolution buffers must not have edge enhancement applied to maximize efficiency of preview and to avoid double-applying enhancement when reprocessed, while low-resolution buffers (used for recording or preview, generally) need edge enhancement applied for reasonable preview quality.

This mode is guaranteed to be supported by devices that support either the YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities (android.request.availableCapabilities lists either of those capabilities) and it will be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.

Value: 3

FLASH_MODE_OFF

Added in API level 21
static val FLASH_MODE_OFF: Int

Do not fire the flash for this capture.

Value: 0

FLASH_MODE_SINGLE

Added in API level 21
static val FLASH_MODE_SINGLE: Int

If the flash is available and charged, fire flash for this capture.

Value: 1

FLASH_MODE_TORCH

Added in API level 21
static val FLASH_MODE_TORCH: Int

Transition flash to continuously on.

Value: 2

FLASH_STATE_CHARGING

Added in API level 21
static val FLASH_STATE_CHARGING: Int

Flash is charging and cannot be fired.

Value: 1

FLASH_STATE_FIRED

Added in API level 21
static val FLASH_STATE_FIRED: Int

Flash fired for this capture.

Value: 3

FLASH_STATE_PARTIAL

Added in API level 21
static val FLASH_STATE_PARTIAL: Int

Flash partially illuminated this frame.

This is usually due to the next or previous frame having the flash fire, and the flash spilling into this capture due to hardware limitations.

Value: 4

FLASH_STATE_READY

Added in API level 21
static val FLASH_STATE_READY: Int

Flash is ready to fire.

Value: 2

FLASH_STATE_UNAVAILABLE

Added in API level 21
static val FLASH_STATE_UNAVAILABLE: Int

No flash on camera.

Value: 0

HOT_PIXEL_MODE_FAST

Added in API level 21
static val HOT_PIXEL_MODE_FAST: Int

Hot pixel correction is applied, without reducing frame rate relative to sensor raw output.

The hotpixel map may be returned in android.statistics.hotPixelMap.

Value: 1

HOT_PIXEL_MODE_HIGH_QUALITY

Added in API level 21
static val HOT_PIXEL_MODE_HIGH_QUALITY: Int

High-quality hot pixel correction is applied, at a cost of possibly reduced frame rate relative to sensor raw output.

The hotpixel map may be returned in android.statistics.hotPixelMap.

Value: 2

HOT_PIXEL_MODE_OFF

Added in API level 21
static val HOT_PIXEL_MODE_OFF: Int

No hot pixel correction is applied.

The frame rate must not be reduced relative to sensor raw output for this option.

The hotpixel map may be returned in android.statistics.hotPixelMap.

Value: 0

INFO_SUPPORTED_HARDWARE_LEVEL_3

Added in API level 24
static val INFO_SUPPORTED_HARDWARE_LEVEL_3: Int

This camera device is capable of YUV reprocessing and RAW data capture, in addition to FULL-level capabilities.

The stream configurations listed in the LEVEL_3, RAW, FULL, LEGACY and LIMITED tables in the documentation are guaranteed to be supported.

The following additional capabilities are guaranteed to be supported:

Value: 3

INFO_SUPPORTED_HARDWARE_LEVEL_FULL

Added in API level 21
static val INFO_SUPPORTED_HARDWARE_LEVEL_FULL: Int

This camera device is capable of supporting advanced imaging applications.

The stream configurations listed in the FULL, LEGACY and LIMITED tables in the documentation are guaranteed to be supported.

A FULL device will support below capabilities:

Note: Pre-API level 23, FULL devices also supported arbitrary cropping region (android.scaler.croppingType == FREEFORM); this requirement was relaxed in API level 23, and FULL devices may only support CENTERED cropping.

Value: 1

INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY

Added in API level 21
static val INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY: Int

This camera device is running in backward compatibility mode.

Only the stream configurations listed in the LEGACY table in the documentation are supported.

A LEGACY device does not support per-frame control, manual sensor control, manual post-processing, arbitrary cropping regions, and has relaxed performance constraints. No additional capabilities beyond BACKWARD_COMPATIBLE will ever be listed by a LEGACY device in android.request.availableCapabilities.

In addition, the android.control.aePrecaptureTrigger is not functional on LEGACY devices. Instead, every request that includes a JPEG-format output target is treated as triggering a still capture, internally executing a precapture trigger. This may fire the flash for flash power metering during precapture, and then fire the flash for the final capture, if a flash is available on the device and the AE mode is set to enable the flash.

Devices that initially shipped with Android version Q or newer will not include any LEGACY-level devices.

Value: 2

INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED

Added in API level 21
static val INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED: Int

This camera device does not have enough capabilities to qualify as a FULL device or better.

Only the stream configurations listed in the LEGACY and LIMITED tables in the documentation are guaranteed to be supported.

All LIMITED devices support the BACKWARDS_COMPATIBLE capability, indicating basic support for color image capture. The only exception is that the device may alternatively support only the DEPTH_OUTPUT capability, if it can only output depth measurements and not color images.

LIMITED devices and above require the use of android.control.aePrecaptureTrigger to lock exposure metering (and calculate flash power, for cameras with flash) before capturing a high-quality still image.

A LIMITED device that only lists the BACKWARDS_COMPATIBLE capability is only required to support full-automatic operation and post-processing (OFF is not supported for android.control.aeMode, android.control.afMode, or android.control.awbMode)

Additional capabilities may optionally be supported by a LIMITED-level device, and can be checked for in android.request.availableCapabilities.

Value: 0

LENS_FACING_BACK

Added in API level 21
static val LENS_FACING_BACK: Int

The camera device faces the opposite direction as the device's screen.

Value: 1

LENS_FACING_EXTERNAL

Added in API level 23
static val LENS_FACING_EXTERNAL: Int

The camera device is an external camera, and has no fixed facing relative to the device's screen.

Value: 2

LENS_FACING_FRONT

Added in API level 21
static val LENS_FACING_FRONT: Int

The camera device faces the same direction as the device's screen.

Value: 0

LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE

Added in API level 21
static val LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE: Int

The lens focus distance is measured in diopters.

However, setting the lens to the same focus distance on separate occasions may result in a different real focus distance, depending on factors such as the orientation of the device, the age of the focusing mechanism, and the device temperature.

Value: 1

LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED

Added in API level 21
static val LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED: Int

The lens focus distance is measured in diopters, and is calibrated.

The lens mechanism is calibrated so that setting the same focus distance is repeatable on multiple occasions with good accuracy, and the focus distance corresponds to the real physical distance to the plane of best focus.

Value: 2

LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED

Added in API level 21
static val LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED: Int

The lens focus distance is not accurate, and the units used for android.lens.focusDistance do not correspond to any physical units.

Setting the lens to the same focus distance on separate occasions may result in a different real focus distance, depending on factors such as the orientation of the device, the age of the focusing mechanism, and the device temperature. The focus distance value will still be in the range of [0, android.lens.info.minimumFocusDistance], where 0 represents the farthest focus.

Value: 0

LENS_OPTICAL_STABILIZATION_MODE_OFF

Added in API level 21
static val LENS_OPTICAL_STABILIZATION_MODE_OFF: Int

Optical stabilization is unavailable.

Value: 0

LENS_OPTICAL_STABILIZATION_MODE_ON

Added in API level 21
static val LENS_OPTICAL_STABILIZATION_MODE_ON: Int

Optical stabilization is enabled.

Value: 1

LENS_POSE_REFERENCE_AUTOMOTIVE

Added in API level 33
static val LENS_POSE_REFERENCE_AUTOMOTIVE: Int

The value of android.lens.poseTranslation is relative to the origin of the automotive sensor coordinate system, which is at the center of the rear axle.

Value: 3

LENS_POSE_REFERENCE_GYROSCOPE

Added in API level 28
static val LENS_POSE_REFERENCE_GYROSCOPE: Int

The value of android.lens.poseTranslation is relative to the position of the primary gyroscope of this Android device.

Value: 1

LENS_POSE_REFERENCE_PRIMARY_CAMERA

Added in API level 28
static val LENS_POSE_REFERENCE_PRIMARY_CAMERA: Int

The value of android.lens.poseTranslation is relative to the optical center of the largest camera device facing the same direction as this camera.

This is the default value for API levels before Android P.

Value: 0

LENS_POSE_REFERENCE_UNDEFINED

Added in API level 30
static val LENS_POSE_REFERENCE_UNDEFINED: Int

The camera device cannot represent the values of android.lens.poseTranslation and android.lens.poseRotation accurately enough. One such example is a camera device on the cover of a foldable phone: in order to measure the pose translation and rotation, some kind of hinge position sensor would be needed.

The value of android.lens.poseTranslation must be all zeros, and android.lens.poseRotation must be values matching its default facing.

Value: 2

LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE

Added in API level 28
static val LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE: Int

A software mechanism is used to synchronize between the physical cameras. As a result, the timestamp of an image from a physical stream is only an approximation of the image sensor start-of-exposure time.

Value: 0

LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED

Added in API level 28
static val LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED: Int

The camera device supports frame timestamp synchronization at the hardware level, and the timestamp of a physical stream image accurately reflects its start-of-exposure time.

Value: 1

NOISE_REDUCTION_MODE_FAST

Added in API level 21
static val NOISE_REDUCTION_MODE_FAST: Int

Noise reduction is applied without reducing frame rate relative to sensor output. It may be the same as OFF if noise reduction will reduce frame rate relative to sensor.

Value: 1

NOISE_REDUCTION_MODE_HIGH_QUALITY

Added in API level 21
static val NOISE_REDUCTION_MODE_HIGH_QUALITY: Int

High-quality noise reduction is applied, at the cost of possibly reduced frame rate relative to sensor output.

Value: 2

NOISE_REDUCTION_MODE_MINIMAL

Added in API level 23
static val NOISE_REDUCTION_MODE_MINIMAL: Int

MINIMAL noise reduction is applied without reducing frame rate relative to sensor output.

Value: 3

NOISE_REDUCTION_MODE_OFF

Added in API level 21
static val NOISE_REDUCTION_MODE_OFF: Int

No noise reduction is applied.

Value: 0

NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG

Added in API level 23
static val NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG: Int

Noise reduction is applied at different levels for different output streams, based on resolution. Streams at maximum recording resolution (see android.hardware.camera2.CameraDevice#createCaptureSession) or below have noise reduction applied, while higher-resolution streams have MINIMAL (if supported) or no noise reduction applied (if MINIMAL is not supported.) The degree of noise reduction for low-resolution streams is tuned so that frame rate is not impacted, and the quality is equal to or better than FAST (since it is only applied to lower-resolution outputs, quality may improve from FAST).

This mode is intended to be used by applications operating in a zero-shutter-lag mode with YUV or PRIVATE reprocessing, where the application continuously captures high-resolution intermediate buffers into a circular buffer, from which a final image is produced via reprocessing when a user takes a picture. For such a use case, the high-resolution buffers must not have noise reduction applied to maximize efficiency of preview and to avoid over-applying noise filtering when reprocessing, while low-resolution buffers (used for recording or preview, generally) need noise reduction applied for reasonable preview quality.

This mode is guaranteed to be supported by devices that support either the YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities (android.request.availableCapabilities lists either of those capabilities) and it will be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.

Value: 4

REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE

Added in API level 21
static val REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE: Int

The minimal set of capabilities that every camera device (regardless of android.info.supportedHardwareLevel) supports.

This capability is listed by all normal devices, and indicates that the camera device has a feature set that's comparable to the baseline requirements for the older android.hardware.Camera API.

Devices with the DEPTH_OUTPUT capability might not list this capability, indicating that they support only depth measurement, not standard color output.

Value: 0

REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE

Added in API level 22
static val REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE: Int

The camera device supports capturing high-resolution images at >= 20 frames per second, in at least the uncompressed YUV format, when post-processing settings are set to FAST. Additionally, all image resolutions less than 24 megapixels can be captured at >= 10 frames per second. Here, 'high resolution' means at least 8 megapixels, or the maximum resolution of the device, whichever is smaller.

More specifically, this means that a size matching the camera device's active array size is listed as a supported size for the android.graphics.ImageFormat#YUV_420_888 format in either android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes or android.hardware.camera2.params.StreamConfigurationMap#getHighResolutionOutputSizes, with a minimum frame duration for that format and size of either <= 1/20 s, or <= 1/10 s if the image size is less than 24 megapixels, respectively; and the android.control.aeAvailableTargetFpsRanges entry lists at least one FPS range where the minimum FPS is >= 1 / minimumFrameDuration for the maximum-size YUV_420_888 format. If that maximum size is listed in android.hardware.camera2.params.StreamConfigurationMap#getHighResolutionOutputSizes, then the list of resolutions for YUV_420_888 from android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes contains at least one resolution >= 8 megapixels, with a minimum frame duration of <= 1/20 s.

If the device supports the android.graphics.ImageFormat#RAW10, android.graphics.ImageFormat#RAW12, android.graphics.ImageFormat#Y8, then those can also be captured at the same rate as the maximum-size YUV_420_888 resolution is.

If the device supports the PRIVATE_REPROCESSING capability, then the same guarantees as for the YUV_420_888 format also apply to the android.graphics.ImageFormat#PRIVATE format.

In addition, the android.sync.maxLatency field is guaranteed to have a value between 0 and 4, inclusive. android.control.aeLockAvailable and android.control.awbLockAvailable are also guaranteed to be true so burst capture with these two locks ON yields consistent image output.

Value: 6

REQUEST_AVAILABLE_CAPABILITIES_COLOR_SPACE_PROFILES

Added in API level 34
static val REQUEST_AVAILABLE_CAPABILITIES_COLOR_SPACE_PROFILES: Int

The device supports querying the possible combinations of color spaces, image formats, and dynamic range profiles supported by the camera and requesting a particular color space for a session via android.hardware.camera2.params.SessionConfiguration#setColorSpace.

Cameras that enable this capability may or may not also implement dynamic range profiles. If they don't, android.hardware.camera2.params.ColorSpaceProfiles#getSupportedDynamicRangeProfiles will return only android.hardware.camera2.params.DynamicRangeProfiles#STANDARD and android.hardware.camera2.params.ColorSpaceProfiles#getSupportedColorSpacesForDynamicRange will assume support of the android.hardware.camera2.params.DynamicRangeProfiles#STANDARD profile in all combinations of color spaces and image formats.

Value: 20

REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO

Added in API level 23
static val REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO: Int

The device supports constrained high speed video recording (frame rate >=120fps) use case. The camera device will support high speed capture session created by android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession, which only accepts high speed request lists created by android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList.

A camera device can still support high speed video streaming by advertising the high speed FPS ranges in android.control.aeAvailableTargetFpsRanges. For this case, all normal capture request per frame control and synchronization requirements will apply to the high speed fps ranges, the same as all other fps ranges. This capability describes the capability of a specialized operating mode with many limitations (see below), which is only targeted at high speed video recording.

The supported high speed video sizes and fps ranges are specified in android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoFpsRanges. To get desired output frame rates, the application is only allowed to select video size and FPS range combinations provided by android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoSizes. The fps range can be controlled via android.control.aeTargetFpsRange.

In this capability, the camera device will override aeMode, awbMode, and afMode to ON, AUTO, and CONTINUOUS_VIDEO, respectively. All post-processing block mode controls will be overridden to be FAST. Therefore, no manual control of capture and post-processing parameters is possible. All other controls operate the same as when android.control.mode == AUTO. This means that all other android.control.* fields continue to work, such as

Outside of android.control.*, the following controls will work:

For high speed recording use case, the actual maximum supported frame rate may be lower than what camera can output, depending on the destination Surfaces for the image data. For example, if the destination surface is from video encoder, the application need check if the video encoder is capable of supporting the high frame rate for a given video size, or it will end up with lower recording frame rate. If the destination surface is from preview window, the actual preview frame rate will be bounded by the screen refresh rate.

The camera device will only support up to 2 high speed simultaneous output surfaces (preview and recording surfaces) in this mode. Above controls will be effective only if all of below conditions are true:

When above conditions are NOT satisfied, android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession will fail.

Switching to a FPS range that has different maximum FPS may trigger some camera device reconfigurations, which may introduce extra latency. It is recommended that the application avoids unnecessary maximum target FPS changes as much as possible during high speed streaming.

Value: 9

See Also

REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT

Added in API level 23
static val REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT: Int

The camera device can produce depth measurements from its field of view.

This capability requires the camera device to support the following:

Generally, depth output operates at a slower frame rate than standard color capture, so the DEPTH16 and DEPTH_POINT_CLOUD formats will commonly have a stall duration that should be accounted for (see android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration). On a device that supports both depth and color-based output, to enable smooth preview, using a repeating burst is recommended, where a depth-output target is only included once every N frames, where N is the ratio between preview output rate and depth output rate, including depth stall time.

Value: 8

REQUEST_AVAILABLE_CAPABILITIES_DYNAMIC_RANGE_TEN_BIT

Added in API level 33
static val REQUEST_AVAILABLE_CAPABILITIES_DYNAMIC_RANGE_TEN_BIT: Int

The device supports one or more 10-bit camera outputs according to the dynamic range profiles specified in android.hardware.camera2.params.DynamicRangeProfiles#getSupportedProfiles. They can be configured as part of the capture session initialization via android.hardware.camera2.params.OutputConfiguration#setDynamicRangeProfile. Cameras that enable this capability must also support the following:

Value: 18

REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA

Added in API level 28
static val REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA: Int

The camera device is a logical camera backed by two or more physical cameras.

In API level 28, the physical cameras must also be exposed to the application via android.hardware.camera2.CameraManager#getCameraIdList.

Starting from API level 29:

Combinations of logical and physical streams, or physical streams from different physical cameras are not guaranteed. However, if the camera device supports CameraDevice#isSessionConfigurationSupported, application must be able to query whether a stream combination involving physical streams is supported by calling CameraDevice#isSessionConfigurationSupported.

Camera application shouldn't assume that there are at most 1 rear camera and 1 front camera in the system. For an application that switches between front and back cameras, the recommendation is to switch between the first rear camera and the first front camera in the list of supported camera devices.

This capability requires the camera device to support the following:

A logical camera device's dynamic metadata may contain android.logicalMultiCamera.activePhysicalId to notify the application of the current active physical camera Id. An active physical camera is the physical camera from which the logical camera's main image data outputs (YUV or RAW) and metadata come from. In addition, this serves as an indication which physical camera is used to output to a RAW stream, or in case only physical cameras support RAW, which physical RAW stream the application should request.

Logical camera's static metadata tags below describe the default active physical camera. An active physical camera is default if it's used when application directly uses requests built from a template. All templates will default to the same active physical camera.

The field of view of non-RAW physical streams must not be smaller than that of the non-RAW logical streams, or the maximum field-of-view of the physical camera, whichever is smaller. The application should check the physical capture result metadata for how the physical streams are cropped or zoomed. More specifically, given the physical camera result metadata, the effective horizontal field-of-view of the physical camera is:

<code>fov = 2 * atan2(cropW * sensorW / (2 * zoomRatio * activeArrayW), focalLength)
  </code>

where the equation parameters are the physical camera's crop region width, physical sensor width, zoom ratio, active array width, and focal length respectively. Typically the physical stream of active physical camera has the same field-of-view as the logical streams. However, the same may not be true for physical streams from non-active physical cameras. For example, if the logical camera has a wide-ultrawide configuration where the wide lens is the default, when the crop region is set to the logical camera's active array size, (and the zoom ratio set to 1.0 starting from Android 11), a physical stream for the ultrawide camera may prefer outputting images with larger field-of-view than that of the wide camera for better stereo matching margin or more robust motion tracking. At the same time, the physical non-RAW streams' field of view must not be smaller than the requested crop region and zoom ratio, as long as it's within the physical lens' capability. For example, for a logical camera with wide-tele lens configuration where the wide lens is the default, if the logical camera's crop region is set to maximum size, and zoom ratio set to 1.0, the physical stream for the tele lens will be configured to its maximum size crop region (no zoom).

Deprecated: Prior to Android 11, the field of view of all non-RAW physical streams cannot be larger than that of non-RAW logical streams. If the logical camera has a wide-ultrawide lens configuration where the wide lens is the default, when the logical camera's crop region is set to maximum size, the FOV of the physical streams for the ultrawide lens will be the same as the logical stream, by making the crop region smaller than its active array size to compensate for the smaller focal length.

For a logical camera, typically the underlying physical cameras have different RAW capabilities (such as resolution or CFA pattern). There are two ways for the application to capture RAW images from the logical camera:

  • If the logical camera has RAW capability, the application can create and use RAW streams in the same way as before. In case a RAW stream is configured, to maintain backward compatibility, the camera device makes sure the default active physical camera remains active and does not switch to other physical cameras. (One exception is that, if the logical camera consists of identical image sensors and advertises multiple focalLength due to different lenses, the camera device may generate RAW images from different physical cameras based on the focalLength being set by the application.) This backward-compatible approach usually results in loss of optical zoom, to telephoto lens or to ultrawide lens.
  • Alternatively, if supported by the device, android.hardware.camera2.MultiResolutionImageReader can be used to capture RAW images from one of the underlying physical cameras ( depending on current zoom level). Because different physical cameras may have different RAW characteristics, the application needs to use the characteristics and result metadata of the active physical camera for the relevant RAW metadata.

The capture request and result metadata tags required for backward compatible camera functionalities will be solely based on the logical camera capability. On the other hand, the use of manual capture controls (sensor or post-processing) with a logical camera may result in unexpected behavior when the HAL decides to switch between physical cameras with different characteristics under the hood. For example, when the application manually sets exposure time and sensitivity while zooming in, the brightness of the camera images may suddenly change because HAL switches from one physical camera to the other.

Value: 11

See Also

REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING

Added in API level 21
static val REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING: Int

The camera device post-processing stages can be manually controlled. The camera device supports basic manual control of the image post-processing stages. This means the following controls are guaranteed to be supported:

If auto white balance is enabled, then the camera device will accurately report the values applied by AWB in the result.

A given camera device may also support additional post-processing controls, but this capability only covers the above list of controls.

For camera devices with LOGICAL_MULTI_CAMERA capability, when underlying active physical camera switches, tonemap, white balance, and shading map may change even if awb is locked. However, the overall post-processing experience for users will be consistent. Refer to LOGICAL_MULTI_CAMERA capability for details.

Value: 2

See Also

REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR

Added in API level 21
static val REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR: Int

The camera device can be manually controlled (3A algorithms such as auto-exposure, and auto-focus can be bypassed). The camera device supports basic manual control of the sensor image acquisition related stages. This means the following controls are guaranteed to be supported:

If any of the above 3A algorithms are enabled, then the camera device will accurately report the values applied by 3A in the result.

A given camera device may also support additional manual sensor controls, but this capability only covers the above list of controls.

If this is supported, android.scaler.streamConfigurationMap will additionally return a min frame duration that is greater than zero for each supported size-format combination.

For camera devices with LOGICAL_MULTI_CAMERA capability, when the underlying active physical camera switches, exposureTime, sensitivity, and lens properties may change even if AE/AF is locked. However, the overall auto exposure and auto focus experience for users will be consistent. Refer to LOGICAL_MULTI_CAMERA capability for details.

Value: 1

REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME

Added in API level 28
static val REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME: Int

The camera device is a monochrome camera that doesn't contain a color filter array, and for YUV_420_888 stream, the pixel values on U and V planes are all 128.

A MONOCHROME camera must support the guaranteed stream combinations required for its device level and capabilities. Additionally, if the monochrome camera device supports Y8 format, all mandatory stream combination requirements related to YUV_420_888 apply to Y8 as well. There are no mandatory stream combination requirements with regard to Y8 for Bayer camera devices.

Starting from Android Q, the SENSOR_INFO_COLOR_FILTER_ARRANGEMENT of a MONOCHROME camera will be either MONO or NIR.

Value: 12

REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING

Added in API level 28
static val REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING: Int

The camera device supports the MOTION_TRACKING value for android.control.captureIntent, which limits maximum exposure time to 20 ms.

This limits the motion blur of capture images, resulting in better image tracking results for use cases such as image stabilization or augmented reality.

Value: 10

REQUEST_AVAILABLE_CAPABILITIES_OFFLINE_PROCESSING

Added in API level 30
static val REQUEST_AVAILABLE_CAPABILITIES_OFFLINE_PROCESSING: Int

The camera device supports the OFFLINE_PROCESSING use case.

With OFFLINE_PROCESSING capability, the application can switch an ongoing capture session to offline mode by calling the CameraCaptureSession#switchToOffline method and specify streams to be kept in offline mode. The camera will then stop currently active repeating requests, prepare for some requests to go into offline mode, and return an offline session object. After the switchToOffline call returns, the original capture session is in closed state as if the CameraCaptureSession#close method has been called. In the offline mode, all inflight requests will continue to be processed in the background, and the application can immediately close the camera or create a new capture session without losing those requests' output images and capture results.

While the camera device is processing offline requests, it might not be able to support all stream configurations it can support without offline requests. When that happens, the createCaptureSession method call will fail. The following stream configurations are guaranteed to work without hitting the resource busy exception:

  • One ongoing offline session: target one output surface of YUV or JPEG format, any resolution.
  • The active camera capture session:
    1. One preview surface (SurfaceView or SurfaceTexture) up to 1920 width
    2. One YUV ImageReader surface up to 1920 width
    3. One Jpeg ImageReader, any resolution: the camera device is allowed to slow down JPEG output speed by 50% if there is any ongoing offline session.
    4. If the device supports PRIVATE_REPROCESSING, one pair of ImageWriter/ImageReader surfaces of private format, with the same resolution that is larger or equal to the JPEG ImageReader resolution above.
  • Alternatively, the active camera session above can be replaced by an legacy Camera with the following parameter settings:
    1. Preview size up to 1920 width
    2. Preview callback size up to 1920 width
    3. Video size up to 1920 width
    4. Picture size, any resolution: the camera device is allowed to slow down JPEG output speed by 50% if there is any ongoing offline session.
Value: 15

REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING

Added in API level 23
static val REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING: Int

The camera device supports the Zero Shutter Lag reprocessing use case.

Value: 4

REQUEST_AVAILABLE_CAPABILITIES_RAW

Added in API level 21
static val REQUEST_AVAILABLE_CAPABILITIES_RAW: Int

The camera device supports outputting RAW buffers and metadata for interpreting them.

Devices supporting the RAW capability allow both for saving DNG files, and for direct application processing of raw sensor images.

Value: 3

REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS

Added in API level 22
static val REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS: Int

The camera device supports accurately reporting the sensor settings for many of the sensor controls while the built-in 3A algorithm is running. This allows reporting of sensor settings even when these settings cannot be manually changed.

The values reported for the following controls are guaranteed to be available in the CaptureResult, including when 3A is enabled:

This capability is a subset of the MANUAL_SENSOR control capability, and will always be included if the MANUAL_SENSOR capability is available.

Value: 5

REQUEST_AVAILABLE_CAPABILITIES_REMOSAIC_REPROCESSING

Added in API level 31
static val REQUEST_AVAILABLE_CAPABILITIES_REMOSAIC_REPROCESSING: Int

The device supports reprocessing from the RAW_SENSOR format with a bayer pattern given by android.sensor.info.binningFactor (m x n group of pixels with the same color filter) to a remosaiced regular bayer pattern.

This capability will only be present for devices with android.hardware.camera2.CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR capability. When android.hardware.camera2.CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR devices do not advertise this capability, android.graphics.ImageFormat#RAW_SENSOR images will already have a regular bayer pattern.

If a RAW_SENSOR stream is requested along with another non-RAW stream in a android.hardware.camera2.CaptureRequest (if multiple streams are supported when android.sensor.pixelMode is set to android.hardware.camera2.CameraMetadata#SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION), the RAW_SENSOR stream will have a regular bayer pattern.

This capability requires the camera device to support the following :

Value: 17

REQUEST_AVAILABLE_CAPABILITIES_SECURE_IMAGE_DATA

Added in API level 29
static val REQUEST_AVAILABLE_CAPABILITIES_SECURE_IMAGE_DATA: Int

The camera device is capable of writing image data into a region of memory inaccessible to Android userspace or the Android kernel, and only accessible to trusted execution environments (TEE).

Value: 13

REQUEST_AVAILABLE_CAPABILITIES_STREAM_USE_CASE

Added in API level 33
static val REQUEST_AVAILABLE_CAPABILITIES_STREAM_USE_CASE: Int

The camera device supports selecting a per-stream use case via android.hardware.camera2.params.OutputConfiguration#setStreamUseCase so that the device can optimize camera pipeline parameters such as tuning, sensor mode, or ISP settings for a specific user scenario. Some sample usages of this capability are:

  • Distinguish high quality YUV captures from a regular YUV stream where the image quality may not be as good as the JPEG stream, or
  • Use one stream to serve multiple purposes: viewfinder, video recording and still capture. This is common with applications that wish to apply edits equally to preview, saved images, and saved videos.

This capability requires the camera device to support the following stream use cases:

  • DEFAULT for backward compatibility where the application doesn't set a stream use case
  • PREVIEW for live viewfinder and in-app image analysis
  • STILL_CAPTURE for still photo capture
  • VIDEO_RECORD for recording video clips
  • PREVIEW_VIDEO_STILL for one single stream used for viewfinder, video recording, and still capture.
  • VIDEO_CALL for long running video calls

android.hardware.camera2.CameraCharacteristics#SCALER_AVAILABLE_STREAM_USE_CASES lists all of the supported stream use cases.

Refer to the guideline for the mandatory stream combinations involving stream use cases, which can also be queried via android.hardware.camera2.params.MandatoryStreamCombination.

Value: 19

REQUEST_AVAILABLE_CAPABILITIES_SYSTEM_CAMERA

Added in API level 30
static val REQUEST_AVAILABLE_CAPABILITIES_SYSTEM_CAMERA: Int

The camera device is only accessible by Android's system components and privileged applications. Processes need to have the android.permission.SYSTEM_CAMERA in addition to android.permission.CAMERA in order to connect to this camera device.

Value: 14

REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR

Added in API level 31
static val REQUEST_AVAILABLE_CAPABILITIES_ULTRA_HIGH_RESOLUTION_SENSOR: Int

This camera device is capable of producing ultra high resolution images in addition to the image sizes described in the android.scaler.streamConfigurationMap. It can operate in 'default' mode and 'max resolution' mode. It generally does this by binning pixels in 'default' mode and not binning them in 'max resolution' mode. android.scaler.streamConfigurationMap describes the streams supported in 'default' mode. The stream configurations supported in 'max resolution' mode are described by android.scaler.streamConfigurationMapMaximumResolution. The maximum resolution mode pixel array size of a camera device (android.sensor.info.pixelArraySize) with this capability, will be at least 24 megapixels.

Value: 16

REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING

Added in API level 23
static val REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING: Int

The camera device supports the YUV_420_888 reprocessing use case, similar as PRIVATE_REPROCESSING, This capability requires the camera device to support the following:

Value: 7

SCALER_AVAILABLE_STREAM_USE_CASES_CROPPED_RAW

Added in API level 34
static val SCALER_AVAILABLE_STREAM_USE_CASES_CROPPED_RAW: Int

Cropped RAW stream when the client chooses to crop the field of view.

Certain types of image sensors can run in binned modes in order to improve signal to noise ratio while capturing frames. However, at certain zoom levels and / or when other scene conditions are deemed fit, the camera sub-system may choose to un-bin and remosaic the sensor's output. This results in a RAW frame which is cropped in field of view and yet has the same number of pixels as full field of view RAW, thereby improving image detail.

The resultant field of view of the RAW stream will be greater than or equal to croppable non-RAW streams. The effective crop region for this RAW stream will be reflected in the CaptureResult key android.scaler.rawCropRegion.

If this stream use case is set on a non-RAW stream, i.e. not one of :

session configuration is not guaranteed to succeed.

This stream use case may not be supported on some devices.

Value: 6

SCALER_AVAILABLE_STREAM_USE_CASES_DEFAULT

Added in API level 33
static val SCALER_AVAILABLE_STREAM_USE_CASES_DEFAULT: Int

Default stream use case.

This use case is the same as when the application doesn't set any use case for the stream. The camera device uses the properties of the output target, such as format, dataSpace, or surface class type, to optimize the image processing pipeline.

Value: 0

SCALER_AVAILABLE_STREAM_USE_CASES_PREVIEW

Added in API level 33
static val SCALER_AVAILABLE_STREAM_USE_CASES_PREVIEW: Int

Live stream shown to the user.

Optimized for performance and usability as a viewfinder, but not necessarily for image quality. The output is not meant to be persisted as saved images or video.

No stall if android.control.* are set to FAST. There may be stall if they are set to HIGH_QUALITY. This use case has the same behavior as the default SurfaceView and SurfaceTexture targets. Additionally, this use case can be used for in-app image analysis.

Value: 1

SCALER_AVAILABLE_STREAM_USE_CASES_PREVIEW_VIDEO_STILL

Added in API level 33
static val SCALER_AVAILABLE_STREAM_USE_CASES_PREVIEW_VIDEO_STILL: Int

One single stream used for combined purposes of preview, video, and still capture.

For such multi-purpose streams, the camera device aims to make the best tradeoff between the individual use cases. For example, the STILL_CAPTURE use case by itself may have stalls for achieving best image quality. But if combined with PREVIEW and VIDEO_RECORD, the camera device needs to trade off the additional image processing for speed so that preview and video recording aren't slowed down.

Similarly, VIDEO_RECORD may produce frames with a substantial lag, but PREVIEW_VIDEO_STILL must have minimal output delay. This means that to enable video stabilization with this use case, the device must support and the app must select the PREVIEW_STABILIZATION mode for video stabilization.

Value: 4

SCALER_AVAILABLE_STREAM_USE_CASES_STILL_CAPTURE

Added in API level 33
static val SCALER_AVAILABLE_STREAM_USE_CASES_STILL_CAPTURE: Int

Still photo capture.

Optimized for high-quality high-resolution capture, and not expected to maintain preview-like frame rates.

The stream may have stalls regardless of whether android.control.* is HIGH_QUALITY. This use case has the same behavior as the default JPEG and RAW related formats.

Value: 2

SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_CALL

Added in API level 33
static val SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_CALL: Int

Long-running video call optimized for both power efficiency and video quality.

The camera sensor may run in a lower-resolution mode to reduce power consumption at the cost of some image and digital zoom quality. Unlike VIDEO_RECORD, VIDEO_CALL outputs are expected to work in dark conditions, so are usually accompanied with variable frame rate settings to allow sufficient exposure time in low light.

Value: 5

SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_RECORD

Added in API level 33
static val SCALER_AVAILABLE_STREAM_USE_CASES_VIDEO_RECORD: Int

Recording video clips.

Optimized for high-quality video capture, including high-quality image stabilization if supported by the device and enabled by the application. As a result, may produce output frames with a substantial lag from real time, to allow for highest-quality stabilization or other processing. As such, such an output is not suitable for drawing to screen directly, and is expected to be persisted to disk or similar for later playback or processing. Only streams that set the VIDEO_RECORD use case are guaranteed to have video stabilization applied when the video stabilization control is set to ON, as opposed to PREVIEW_STABILIZATION.

This use case has the same behavior as the default MediaRecorder and MediaCodec targets.

Value: 3

SCALER_CROPPING_TYPE_CENTER_ONLY

Added in API level 21
static val SCALER_CROPPING_TYPE_CENTER_ONLY: Int

The camera device only supports centered crop regions.

Value: 0

SCALER_CROPPING_TYPE_FREEFORM

Added in API level 21
static val SCALER_CROPPING_TYPE_FREEFORM: Int

The camera device supports arbitrarily chosen crop regions.

Value: 1

SCALER_ROTATE_AND_CROP_180

Added in API level 31
static val SCALER_ROTATE_AND_CROP_180: Int

Processed images are rotated by 180 degrees. Since the aspect ratio does not change, no cropping is performed.

Value: 2

SCALER_ROTATE_AND_CROP_270

Added in API level 31
static val SCALER_ROTATE_AND_CROP_270: Int

Processed images are rotated by 270 degrees clockwise, and then cropped to the original aspect ratio.

Value: 3

SCALER_ROTATE_AND_CROP_90

Added in API level 31
static val SCALER_ROTATE_AND_CROP_90: Int

Processed images are rotated by 90 degrees clockwise, and then cropped to the original aspect ratio.

Value: 1

SCALER_ROTATE_AND_CROP_AUTO

Added in API level 31
static val SCALER_ROTATE_AND_CROP_AUTO: Int

The camera API automatically selects the best concrete value for rotate-and-crop based on the application's support for resizability and the current multi-window mode.

If the application does not support resizing but the display mode for its main Activity is not in a typical orientation, the camera API will set ROTATE_AND_CROP_90 or some other supported rotation value, depending on device configuration, to ensure preview and captured images are correctly shown to the user. Otherwise, ROTATE_AND_CROP_NONE will be selected.

When a value other than NONE is selected, several metadata fields will also be parsed differently to ensure that coordinates are correctly handled for features like drawing face detection boxes or passing in tap-to-focus coordinates. The camera API will convert positions in the active array coordinate system to/from the cropped-and-rotated coordinate system to make the operation transparent for applications.

No coordinate mapping will be done when the application selects a non-AUTO mode.

Value: 4

SCALER_ROTATE_AND_CROP_NONE

Added in API level 31
static val SCALER_ROTATE_AND_CROP_NONE: Int

No rotate and crop is applied. Processed outputs are in the sensor orientation.

Value: 0

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR

Added in API level 21
static val SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR: Int
Value: 3

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG

Added in API level 21
static val SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG: Int
Value: 2

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG

Added in API level 21
static val SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG: Int
Value: 1

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_MONO

Added in API level 29
static val SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_MONO: Int

Sensor doesn't have any Bayer color filter. Such sensor captures visible light in monochrome. The exact weighting and wavelengths captured is not specified, but generally only includes the visible frequencies. This value implies a MONOCHROME camera.

Value: 5

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_NIR

Added in API level 29
static val SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_NIR: Int

Sensor has a near infrared filter capturing light with wavelength between roughly 750nm and 1400nm, and the same filter covers the whole sensor array. This value implies a MONOCHROME camera.

Value: 6

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB

Added in API level 21
static val SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB: Int

Sensor is not Bayer; output has 3 16-bit values for each pixel, instead of just 1 16-bit value per pixel.

Value: 4

SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB

Added in API level 21
static val SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB: Int
Value: 0

SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME

Added in API level 21
static val SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME: Int

Timestamps from android.sensor.timestamp are in the same timebase as android.os.SystemClock#elapsedRealtimeNanos, and they can be compared to other timestamps using that base.

When buffers from a REALTIME device are passed directly to a video encoder from the camera, automatic compensation is done to account for differing timebases of the audio and camera subsystems. If the application is receiving buffers and then later sending them to a video encoder or other application where they are compared with audio subsystem timestamps or similar, this compensation is not present. In those cases, applications need to adjust the timestamps themselves. Since android.os.SystemClock#elapsedRealtimeNanos and android.os.SystemClock#uptimeMillis only diverge while the device is asleep, an offset between the two sources can be measured once per active session and applied to timestamps for sufficient accuracy for A/V sync.

Value: 1

SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN

Added in API level 21
static val SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN: Int

Timestamps from android.sensor.timestamp are in nanoseconds and monotonic, but can not be compared to timestamps from other subsystems (e.g. accelerometer, gyro etc.), or other instances of the same or different camera devices in the same system with accuracy. However, the timestamps are roughly in the same timebase as android.os.SystemClock#uptimeMillis. The accuracy is sufficient for tasks like A/V synchronization for video recording, at least, and the timestamps can be directly used together with timestamps from the audio subsystem for that task.

Timestamps between streams and results for a single camera instance are comparable, and the timestamps for all buffers and the result metadata generated by a single capture are identical.

Value: 0

SENSOR_PIXEL_MODE_DEFAULT

Added in API level 31
static val SENSOR_PIXEL_MODE_DEFAULT: Int

This is the default sensor pixel mode.

Value: 0

SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION

Added in API level 31
static val SENSOR_PIXEL_MODE_MAXIMUM_RESOLUTION: Int

In this mode, sensors typically do not bin pixels, as a result can offer larger image sizes.

Value: 1

SENSOR_READOUT_TIMESTAMP_HARDWARE

Added in API level 34
static val SENSOR_READOUT_TIMESTAMP_HARDWARE: Int

This camera device supports the onReadoutStarted callback as well as outputting readout timestamps. The readout timestamp is generated by the camera hardware and it has the same accuracy and timing characteristics of the start-of-exposure time.

Value: 1

SENSOR_READOUT_TIMESTAMP_NOT_SUPPORTED

Added in API level 34
static val SENSOR_READOUT_TIMESTAMP_NOT_SUPPORTED: Int

This camera device doesn't support readout timestamp and onReadoutStarted callback.

Value: 0

SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER: Int
Value: 10

SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT: Int

W 3900 - 4500K

Value: 14

SENSOR_REFERENCE_ILLUMINANT1_D50

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_D50: Int
Value: 23

SENSOR_REFERENCE_ILLUMINANT1_D55

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_D55: Int
Value: 20

SENSOR_REFERENCE_ILLUMINANT1_D65

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_D65: Int
Value: 21

SENSOR_REFERENCE_ILLUMINANT1_D75

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_D75: Int
Value: 22

SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT: Int
Value: 1

SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT: Int

D 5700 - 7100K

Value: 12

SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT: Int

N 4600 - 5400K

Value: 13

SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER: Int
Value: 9

SENSOR_REFERENCE_ILLUMINANT1_FLASH

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_FLASH: Int
Value: 4

SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT: Int
Value: 2

SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN: Int
Value: 24

SENSOR_REFERENCE_ILLUMINANT1_SHADE

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_SHADE: Int
Value: 11

SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A: Int
Value: 17

SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B: Int
Value: 18

SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C: Int
Value: 19

SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN: Int

Incandescent light

Value: 3

SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT

Added in API level 21
static val SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT: Int

WW 3200 - 3700K

Value: 15

SENSOR_TEST_PATTERN_MODE_COLOR_BARS

Added in API level 21
static val SENSOR_TEST_PATTERN_MODE_COLOR_BARS: Int

All pixel data is replaced with an 8-bar color pattern.

The vertical bars (left-to-right) are as follows:

  • 100% white
  • yellow
  • cyan
  • green
  • magenta
  • red
  • blue
  • black

In general the image would look like the following:

<code>W Y C G M R B K
  W Y C G M R B K
  W Y C G M R B K
  W Y C G M R B K
  W Y C G M R B K
  . . . . . . . .
  . . . . . . . .
  . . . . . . . .
 
  (B = Blue, K = Black)
  </code>

Each bar should take up 1/8 of the sensor pixel array width. When this is not possible, the bar size should be rounded down to the nearest integer and the pattern can repeat on the right side.

Each bar's height must always take up the full sensor pixel array height.

Each pixel in this test pattern must be set to either 0% intensity or 100% intensity.

Value: 2

SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY

Added in API level 21
static val SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY: Int

The test pattern is similar to COLOR_BARS, except that each bar should start at its specified color at the top, and fade to gray at the bottom.

Furthermore each bar is further subdivided into a left and right half. The left half should have a smooth gradient, and the right half should have a quantized gradient.

In particular, the right half's should consist of blocks of the same color for 1/16th active sensor pixel array width.

The least significant bits in the quantized gradient should be copied from the most significant bits of the smooth gradient.

The height of each bar should always be a multiple of 128. When this is not the case, the pattern should repeat at the bottom of the image.

Value: 3

SENSOR_TEST_PATTERN_MODE_CUSTOM1

Added in API level 21
static val SENSOR_TEST_PATTERN_MODE_CUSTOM1: Int

The first custom test pattern. All custom patterns that are available only on this camera device are at least this numeric value.

All of the custom test patterns will be static (that is the raw image must not vary from frame to frame).

Value: 256

SENSOR_TEST_PATTERN_MODE_OFF

Added in API level 21
static val SENSOR_TEST_PATTERN_MODE_OFF: Int

No test pattern mode is used, and the camera device returns captures from the image sensor.

This is the default if the key is not set.

Value: 0

SENSOR_TEST_PATTERN_MODE_PN9

Added in API level 21
static val SENSOR_TEST_PATTERN_MODE_PN9: Int

All pixel data is replaced by a pseudo-random sequence generated from a PN9 512-bit sequence (typically implemented in hardware with a linear feedback shift register).

The generator should be reset at the beginning of each frame, and thus each subsequent raw frame with this test pattern should be exactly the same as the last.

Value: 4

SENSOR_TEST_PATTERN_MODE_SOLID_COLOR

Added in API level 21
static val SENSOR_TEST_PATTERN_MODE_SOLID_COLOR: Int

Each pixel in [R, G_even, G_odd, B] is replaced by its respective color channel provided in android.sensor.testPatternData.

For example:

<code><code><a docref="android.hardware.camera2.CaptureRequest$SENSOR_TEST_PATTERN_DATA">android.sensor.testPatternData</a></code> = [0, 0xFFFFFFFF, 0xFFFFFFFF, 0]
  </code>

All green pixels are 100% green. All red/blue pixels are black.

<code><code><a docref="android.hardware.camera2.CaptureRequest$SENSOR_TEST_PATTERN_DATA">android.sensor.testPatternData</a></code> = [0xFFFFFFFF, 0, 0xFFFFFFFF, 0]
  </code>

All red pixels are 100% red. Only the odd green pixels are 100% green. All blue pixels are 100% black.

Value: 1

SHADING_MODE_FAST

Added in API level 21
static val SHADING_MODE_FAST: Int

Apply lens shading corrections, without slowing frame rate relative to sensor raw output

Value: 1

SHADING_MODE_HIGH_QUALITY

Added in API level 21
static val SHADING_MODE_HIGH_QUALITY: Int

Apply high-quality lens shading correction, at the cost of possibly reduced frame rate.

Value: 2

SHADING_MODE_OFF

Added in API level 21
static val SHADING_MODE_OFF: Int

No lens shading correction is applied.

Value: 0

STATISTICS_FACE_DETECT_MODE_FULL

Added in API level 21
static val STATISTICS_FACE_DETECT_MODE_FULL: Int

Return all face metadata.

In this mode, face rectangles, scores, landmarks, and face IDs are all valid.

Value: 2

STATISTICS_FACE_DETECT_MODE_OFF

Added in API level 21
static val STATISTICS_FACE_DETECT_MODE_OFF: Int

Do not include face detection statistics in capture results.

Value: 0

STATISTICS_FACE_DETECT_MODE_SIMPLE

Added in API level 21
static val STATISTICS_FACE_DETECT_MODE_SIMPLE: Int

Return face rectangle and confidence values only.

Value: 1

STATISTICS_LENS_SHADING_MAP_MODE_OFF

Added in API level 21
static val STATISTICS_LENS_SHADING_MAP_MODE_OFF: Int

Do not include a lens shading map in the capture result.

Value: 0

STATISTICS_LENS_SHADING_MAP_MODE_ON

Added in API level 21
static val STATISTICS_LENS_SHADING_MAP_MODE_ON: Int

Include a lens shading map in the capture result.

Value: 1

STATISTICS_OIS_DATA_MODE_OFF

Added in API level 28
static val STATISTICS_OIS_DATA_MODE_OFF: Int

Do not include OIS data in the capture result.

Value: 0

STATISTICS_OIS_DATA_MODE_ON

Added in API level 28
static val STATISTICS_OIS_DATA_MODE_ON: Int

Include OIS data in the capture result.

android.statistics.oisSamples provides OIS sample data in the output result metadata.

Value: 1

STATISTICS_SCENE_FLICKER_50HZ

Added in API level 21
static val STATISTICS_SCENE_FLICKER_50HZ: Int

The camera device detects illumination flickering at 50Hz in the current scene.

Value: 1

STATISTICS_SCENE_FLICKER_60HZ

Added in API level 21
static val STATISTICS_SCENE_FLICKER_60HZ: Int

The camera device detects illumination flickering at 60Hz in the current scene.

Value: 2

STATISTICS_SCENE_FLICKER_NONE

Added in API level 21
static val STATISTICS_SCENE_FLICKER_NONE: Int

The camera device does not detect any flickering illumination in the current scene.

Value: 0

SYNC_MAX_LATENCY_PER_FRAME_CONTROL

Added in API level 21
static val SYNC_MAX_LATENCY_PER_FRAME_CONTROL: Int

Every frame has the requests immediately applied.

Changing controls over multiple requests one after another will produce results that have those controls applied atomically each frame.

All FULL capability devices will have this as their maxLatency.

Value: 0

SYNC_MAX_LATENCY_UNKNOWN

Added in API level 21
static val SYNC_MAX_LATENCY_UNKNOWN: Int

Each new frame has some subset (potentially the entire set) of the past requests applied to the camera settings.

By submitting a series of identical requests, the camera device will eventually have the camera settings applied, but it is unknown when that exact point will be.

All LEGACY capability devices will have this as their maxLatency.

Value: -1

TONEMAP_MODE_CONTRAST_CURVE

Added in API level 21
static val TONEMAP_MODE_CONTRAST_CURVE: Int

Use the tone mapping curve specified in the android.tonemap.curve* entries.

All color enhancement and tonemapping must be disabled, except for applying the tonemapping curve specified by android.tonemap.curve.

Must not slow down frame rate relative to raw sensor output.

Value: 0

TONEMAP_MODE_FAST

Added in API level 21
static val TONEMAP_MODE_FAST: Int

Advanced gamma mapping and color enhancement may be applied, without reducing frame rate compared to raw sensor output.

Value: 1

TONEMAP_MODE_GAMMA_VALUE

Added in API level 23
static val TONEMAP_MODE_GAMMA_VALUE: Int

Use the gamma value specified in android.tonemap.gamma to perform tonemapping.

All color enhancement and tonemapping must be disabled, except for applying the tonemapping curve specified by android.tonemap.gamma.

Must not slow down frame rate relative to raw sensor output.

Value: 3

TONEMAP_MODE_HIGH_QUALITY

Added in API level 21
static val TONEMAP_MODE_HIGH_QUALITY: Int

High-quality gamma mapping and color enhancement will be applied, at the cost of possibly reduced frame rate compared to raw sensor output.

Value: 2

TONEMAP_MODE_PRESET_CURVE

Added in API level 23
static val TONEMAP_MODE_PRESET_CURVE: Int

Use the preset tonemapping curve specified in android.tonemap.presetCurve to perform tonemapping.

All color enhancement and tonemapping must be disabled, except for applying the tonemapping curve specified by android.tonemap.presetCurve.

Must not slow down frame rate relative to raw sensor output.

Value: 4

TONEMAP_PRESET_CURVE_REC709

Added in API level 23
static val TONEMAP_PRESET_CURVE_REC709: Int

Tonemapping curve is defined by ITU-R BT.709

Value: 1

TONEMAP_PRESET_CURVE_SRGB

Added in API level 23
static val TONEMAP_PRESET_CURVE_SRGB: Int

Tonemapping curve is defined by sRGB

Value: 0

Public methods

getKeys

Added in API level 21
open fun getKeys(): MutableList<TKey>

Returns a list of the keys contained in this map.

The list returned is not modifiable, so any attempts to modify it will throw a UnsupportedOperationException.

All values retrieved by a key from this list with get are guaranteed to be non-null. Each key is only listed once in the list. The order of the keys is undefined.

Return
MutableList<TKey> List of the keys contained in this map.