Paint

Kotlin |Java

open class Paint

kotlin.Any
↳	android.graphics.Paint

Known Direct Subclasses

TextPaint

TextPaint is an extension of Paint that leaves room for some extra data used during text measuring and drawing.

The Paint class holds the style and color information about how to draw geometries, text and bitmaps.

Summary

Nested classes
	`Align` Align specifies how drawText aligns its text relative to the [x,y] coordinates.
	`Cap` The Cap specifies the treatment for the beginning and ending of stroked lines and paths.
open	`FontMetrics` Class that describes the various metrics for a font at a given text size.
open	`FontMetricsInt` Convenience method for callers that want to have FontMetrics values as integers.
	`Join` The Join specifies the treatment where lines and curve segments join on a stroked path.
	`Style` The Style specifies if the primitive being drawn is filled, stroked, or both (in the same color).

Constants
static Int	`ANTI_ALIAS_FLAG` Paint flag that enables antialiasing when drawing.
static Int	`CURSOR_AFTER` Option for getTextRunCursor.
static Int	`CURSOR_AT` Option for getTextRunCursor.
static Int	`CURSOR_AT_OR_AFTER` Option for getTextRunCursor.
static Int	`CURSOR_AT_OR_BEFORE` Option for getTextRunCursor.
static Int	`CURSOR_BEFORE` Option for getTextRunCursor.
static Int	`DEV_KERN_TEXT_FLAG` Legacy Paint flag, no longer used.
static Int	`DITHER_FLAG` Paint flag that enables dithering when blitting.
static Int	`EMBEDDED_BITMAP_TEXT_FLAG` Paint flag that enables the use of bitmap fonts when drawing text.
static Int	`END_HYPHEN_EDIT_INSERT_ARMENIAN_HYPHEN` An integer representing the end of the line has Armentian hyphen (U+058A).
static Int	`END_HYPHEN_EDIT_INSERT_HYPHEN` An integer representing the end of the line has normal hyphen character (U+002D).
static Int	`END_HYPHEN_EDIT_INSERT_MAQAF` An integer representing the end of the line has maqaf (Hebrew hyphen, U+05BE).
static Int	`END_HYPHEN_EDIT_INSERT_UCAS_HYPHEN` An integer representing the end of the line has Canadian Syllabics hyphen (U+1400).
static Int	`END_HYPHEN_EDIT_INSERT_ZWJ_AND_HYPHEN` An integer representing the end of the line has Zero-Width-Joiner (U+200D) followed by normal hyphen character (U+002D).
static Int	`END_HYPHEN_EDIT_NO_EDIT` An integer representing the end of the line has no modification for hyphenation.
static Int	`END_HYPHEN_EDIT_REPLACE_WITH_HYPHEN` An integer representing the character at the end of the line is replaced with hyphen character (U+002D).
static Int	`FAKE_BOLD_TEXT_FLAG` Paint flag that applies a synthetic bolding effect to drawn text.
static Int	`FILTER_BITMAP_FLAG` Paint flag that enables bilinear sampling on scaled bitmaps.
static Int	`HINTING_OFF` Font hinter option that disables font hinting.
static Int	`HINTING_ON` Font hinter option that enables font hinting.
static Int	`LINEAR_TEXT_FLAG` Paint flag that enables smooth linear scaling of text.
static Int	`START_HYPHEN_EDIT_INSERT_HYPHEN` An integer representing the starting of the line has normal hyphen character (U+002D).
static Int	`START_HYPHEN_EDIT_INSERT_ZWJ` An integer representing the starting of the line has Zero-Width-Joiner (U+200D).
static Int	`START_HYPHEN_EDIT_NO_EDIT` An integer representing the starting of the line has no modification for hyphenation.
static Int	`STRIKE_THRU_TEXT_FLAG` Paint flag that applies a strike-through decoration to drawn text.
static Int	`SUBPIXEL_TEXT_FLAG` Paint flag that enables subpixel positioning of text.
static Int	`TEXT_RUN_FLAG_LEFT_EDGE` A text run flag that indicates the run is located the visually most left segment of the line.
static Int	`TEXT_RUN_FLAG_RIGHT_EDGE` A text run flag that indicates the run is located the visually most right segment of the line.
static Int	`UNDERLINE_TEXT_FLAG` Paint flag that applies an underline decoration to drawn text.

Public constructors
`Paint()` Create a new paint with default settings.
`Paint(flags: Int)` Create a new paint with the specified flags.
`Paint(paint: Paint!)` Create a new paint, initialized with the attributes in the specified paint parameter.

Public methods
open Float	`ascent()` Return the distance above (negative) the baseline (ascent) based on the current typeface and text size.
open Int	`breakText(text: CharArray!, index: Int, count: Int, maxWidth: Float, measuredWidth: FloatArray!)` Measure the text, stopping early if the measured width exceeds maxWidth.
open Int	`breakText(text: CharSequence!, start: Int, end: Int, measureForwards: Boolean, maxWidth: Float, measuredWidth: FloatArray!)` Measure the text, stopping early if the measured width exceeds maxWidth.
open Int	`breakText(text: String!, measureForwards: Boolean, maxWidth: Float, measuredWidth: FloatArray!)` Measure the text, stopping early if the measured width exceeds maxWidth.
open Unit	`clearShadowLayer()` Clear the shadow layer.
open Float	`descent()` Return the distance below (positive) the baseline (descent) based on the current typeface and text size.
open Boolean	`equalsForTextMeasurement(other: Paint)` Returns true of the passed `Paint` will have the same effect on text measurement
open Int	`getAlpha()` Helper to getColor() that just returns the color's alpha value.
open BlendMode?	`getBlendMode()` Get the paint's blend mode object.
open Int	`getColor()` Return the paint's color in sRGB.
open ColorFilter!	`getColorFilter()` Get the paint's colorfilter (maybe be null).
open Long	`getColorLong()` Return the paint's color.
open Int	`getEndHyphenEdit()` Get the current value of end hyphen edit.
open Boolean	`getFillPath(src: Path!, dst: Path!)` Applies any/all effects (patheffect, stroking) to src, returning the result in dst.
open Int	`getFlags()` Return the paint's flags.
open String!	`getFontFeatureSettings()` Returns the font feature settings.
open Float	`getFontMetrics(metrics: Paint.FontMetrics!)` Return the font's recommended interline spacing, given the Paint's settings for typeface, textSize, etc.
open Paint.FontMetrics!	`getFontMetrics()` Allocates a new FontMetrics object, and then calls getFontMetrics(fm) with it, returning the object.
open Unit	`getFontMetricsForLocale(metrics: Paint.FontMetrics)` Get the font metrics used for the locale Obtain the metrics of the font that is used for the specified locale by `setTextLocales(android.os.LocaleList)`.
open Unit	`getFontMetricsInt(text: CharSequence, start: Int, count: Int, contextStart: Int, contextCount: Int, isRtl: Boolean, outMetrics: Paint.FontMetricsInt)` Returns the font metrics value for the given text.
open Unit	`getFontMetricsInt(text: CharArray, start: Int, count: Int, contextStart: Int, contextCount: Int, isRtl: Boolean, outMetrics: Paint.FontMetricsInt)` Returns the font metrics value for the given text.
open Int	`getFontMetricsInt(fmi: Paint.FontMetricsInt!)` Return the font's interline spacing, given the Paint's settings for typeface, textSize, etc.
open Paint.FontMetricsInt!	`getFontMetricsInt()`
open Unit	`getFontMetricsIntForLocale(metrics: Paint.FontMetricsInt)` Get the font metrics used for the locale Obtain the metrics of the font that is used for the specified locale by `setTextLocales(android.os.LocaleList)`.
open Float	`getFontSpacing()` Return the recommend line spacing based on the current typeface and text size.
open String!	`getFontVariationSettings()` Returns the font variation settings.
open Int	`getHinting()` Return the paint's hinting mode.
open Float	`getLetterSpacing()` Return the paint's letter-spacing for text.
open MaskFilter!	`getMaskFilter()` Get the paint's maskfilter object.
open Int	`getOffsetForAdvance(text: CharArray!, start: Int, end: Int, contextStart: Int, contextEnd: Int, isRtl: Boolean, advance: Float)` Get the character offset within the string whose position is closest to the specified horizontal position.
open Int	`getOffsetForAdvance(text: CharSequence!, start: Int, end: Int, contextStart: Int, contextEnd: Int, isRtl: Boolean, advance: Float)`
open PathEffect!	`getPathEffect()` Get the paint's patheffect object.
open Float	`getRunAdvance(text: CharArray!, start: Int, end: Int, contextStart: Int, contextEnd: Int, isRtl: Boolean, offset: Int)` Measure cursor position within a run of text.
open Float	`getRunAdvance(text: CharSequence!, start: Int, end: Int, contextStart: Int, contextEnd: Int, isRtl: Boolean, offset: Int)`
open Float	`getRunCharacterAdvance(text: CharArray, start: Int, end: Int, contextStart: Int, contextEnd: Int, isRtl: Boolean, offset: Int, advances: FloatArray?, advancesIndex: Int)` Measure the advance of each character within a run of text and also return the cursor position within the run.
open Float	`getRunCharacterAdvance(text: CharSequence, start: Int, end: Int, contextStart: Int, contextEnd: Int, isRtl: Boolean, offset: Int, advances: FloatArray?, advancesIndex: Int)`
open Shader!	`getShader()` Get the paint's shader object.
open Int	`getShadowLayerColor()` Returns the color of the shadow layer.
open Long	`getShadowLayerColorLong()` Returns the color of the shadow layer.
open Float	`getShadowLayerDx()` Returns the x offset of the shadow layer.
open Float	`getShadowLayerDy()` Returns the y offset of the shadow layer.
open Float	`getShadowLayerRadius()` Returns the blur radius of the shadow layer.
open Int	`getStartHyphenEdit()` Get the current value of start hyphen edit.
open Float	`getStrikeThruPosition()` Distance from top of the strike-through line to the baseline in pixels.
open Float	`getStrikeThruThickness()` Returns the thickness of the strike-through line in pixels.
open Paint.Cap!	`getStrokeCap()` Return the paint's Cap, controlling how the start and end of stroked lines and paths are treated.
open Paint.Join!	`getStrokeJoin()` Return the paint's stroke join type.
open Float	`getStrokeMiter()` Return the paint's stroke miter value.
open Float	`getStrokeWidth()` Return the width for stroking.
open Paint.Style!	`getStyle()` Return the paint's style, used for controlling how primitives' geometries are interpreted (except for drawBitmap, which always assumes FILL_STYLE).
open Paint.Align!	`getTextAlign()` Return the paint's Align value for drawing text.
open Unit	`getTextBounds(text: String!, start: Int, end: Int, bounds: Rect!)` Retrieve the text boundary box and store to bounds.
open Unit	`getTextBounds(text: CharSequence, start: Int, end: Int, bounds: Rect)` Retrieve the text boundary box and store to bounds.
open Unit	`getTextBounds(text: CharArray!, index: Int, count: Int, bounds: Rect!)` Return in bounds (allocated by the caller) the smallest rectangle that encloses all of the characters, with an implied origin at (0,0).
open Locale	`getTextLocale()` Get the text's primary Locale.
open LocaleList	`getTextLocales()` Get the text locale list.
open Unit	`getTextPath(text: CharArray!, index: Int, count: Int, x: Float, y: Float, path: Path!)` Return the path (outline) for the specified text.
open Unit	`getTextPath(text: String!, start: Int, end: Int, x: Float, y: Float, path: Path!)` Return the path (outline) for the specified text.
open Float	`getTextRunAdvances(chars: CharArray, index: Int, count: Int, contextIndex: Int, contextCount: Int, isRtl: Boolean, advances: FloatArray?, advancesIndex: Int)` Retrieve the character advances of the text.
open Int	`getTextRunCursor(text: CharArray, contextStart: Int, contextLength: Int, isRtl: Boolean, offset: Int, cursorOpt: Int)` Returns the next cursor position in the run.
open Int	`getTextRunCursor(text: CharSequence, contextStart: Int, contextEnd: Int, isRtl: Boolean, offset: Int, cursorOpt: Int)` Returns the next cursor position in the run.
open Float	`getTextScaleX()` Return the paint's horizontal scale factor for text.
open Float	`getTextSize()` Return the paint's text size.
open Float	`getTextSkewX()` Return the paint's horizontal skew factor for text.
open Int	`getTextWidths(text: CharArray!, index: Int, count: Int, widths: FloatArray!)` Return the advance widths for the characters in the string.
open Int	`getTextWidths(text: CharSequence!, start: Int, end: Int, widths: FloatArray!)` Return the advance widths for the characters in the string.
open Int	`getTextWidths(text: String!, start: Int, end: Int, widths: FloatArray!)` Return the advance widths for the characters in the string.
open Int	`getTextWidths(text: String!, widths: FloatArray!)` Return the advance widths for the characters in the string.
open Typeface!	`getTypeface()` Get the paint's typeface object.
open Float	`getUnderlinePosition()` Returns the distance from top of the underline to the baseline in pixels.
open Float	`getUnderlineThickness()` Returns the thickness of the underline in pixels.
open Float	`getWordSpacing()` Return the paint's extra word-spacing for text.
open Xfermode!	`getXfermode()` Get the paint's transfer mode object.
open Boolean	`hasGlyph(string: String!)` Determine whether the typeface set on the paint has a glyph supporting the string.
Boolean	`isAntiAlias()` Helper for getFlags(), returning true if ANTI_ALIAS_FLAG bit is set AntiAliasing smooths out the edges of what is being drawn, but is has no impact on the interior of the shape.
Boolean	`isDither()` Helper for getFlags(), returning true if DITHER_FLAG bit is set Dithering affects how colors that are higher precision than the device are down-sampled.
open Boolean	`isElegantTextHeight()` Get the elegant metrics flag.
Boolean	`isFakeBoldText()` Helper for getFlags(), returning true if FAKE_BOLD_TEXT_FLAG bit is set
Boolean	`isFilterBitmap()` Whether or not the bitmap filter is activated.
Boolean	`isLinearText()` Helper for getFlags(), returning true if LINEAR_TEXT_FLAG bit is set
Boolean	`isStrikeThruText()` Helper for getFlags(), returning true if STRIKE_THRU_TEXT_FLAG bit is set
Boolean	`isSubpixelText()` Helper for getFlags(), returning true if SUBPIXEL_TEXT_FLAG bit is set
Boolean	`isUnderlineText()` Helper for getFlags(), returning true if UNDERLINE_TEXT_FLAG bit is set
open Float	`measureText(text: CharArray!, index: Int, count: Int)` Return the width of the text.
open Float	`measureText(text: String!, start: Int, end: Int)` Return the width of the text.
open Float	`measureText(text: String!)` Return the width of the text.
open Float	`measureText(text: CharSequence!, start: Int, end: Int)` Return the width of the text.
open Unit	`reset()` Restores the paint to its default settings.
open Unit	`set(src: Paint!)` Copy the fields from src into this paint.
open Unit	`setARGB(a: Int, r: Int, g: Int, b: Int)` Helper to setColor(), that takes a,r,g,b and constructs the color int
open Unit	`setAlpha(a: Int)` Helper to setColor(), that only assigns the color's alpha value, leaving its r,g,b values unchanged.
open Unit	`setAntiAlias(aa: Boolean)` Helper for setFlags(), setting or clearing the ANTI_ALIAS_FLAG bit AntiAliasing smooths out the edges of what is being drawn, but is has no impact on the interior of the shape.
open Unit	`setBlendMode(blendmode: BlendMode?)` Set or clear the blend mode.
open Unit	`setColor(color: Int)` Set the paint's color.
open Unit	`setColor(color: Long)` Set the paint's color with a `ColorLong`.
open ColorFilter!	`setColorFilter(filter: ColorFilter!)` Set or clear the paint's colorfilter, returning the parameter.
open Unit	`setDither(dither: Boolean)` Helper for setFlags(), setting or clearing the DITHER_FLAG bit Dithering affects how colors that are higher precision than the device are down-sampled.
open Unit	`setElegantTextHeight(elegant: Boolean)` Set the paint's elegant height metrics flag.
open Unit	`setEndHyphenEdit(endHyphen: Int)` Set a end hyphen edit on the paint.
open Unit	`setFakeBoldText(fakeBoldText: Boolean)` Helper for setFlags(), setting or clearing the FAKE_BOLD_TEXT_FLAG bit
open Unit	`setFilterBitmap(filter: Boolean)` Helper for setFlags(), setting or clearing the FILTER_BITMAP_FLAG bit.
open Unit	`setFlags(flags: Int)` Set the paint's flags.
open Unit	`setFontFeatureSettings(settings: String!)` Set font feature settings.
open Boolean	`setFontVariationSettings(fontVariationSettings: String!)` Sets TrueType or OpenType font variation settings.
open Unit	`setHinting(mode: Int)` Set the paint's hinting mode.
open Unit	`setLetterSpacing(letterSpacing: Float)` Set the paint's letter-spacing for text.
open Unit	`setLinearText(linearText: Boolean)` Helper for setFlags(), setting or clearing the LINEAR_TEXT_FLAG bit
open MaskFilter!	`setMaskFilter(maskfilter: MaskFilter!)` Set or clear the maskfilter object.
open PathEffect!	`setPathEffect(effect: PathEffect!)` Set or clear the patheffect object.
open Shader!	`setShader(shader: Shader!)` Set or clear the shader object.
open Unit	`setShadowLayer(radius: Float, dx: Float, dy: Float, shadowColor: Int)` This draws a shadow layer below the main layer, with the specified offset and color, and blur radius.
open Unit	`setShadowLayer(radius: Float, dx: Float, dy: Float, shadowColor: Long)` This draws a shadow layer below the main layer, with the specified offset and color, and blur radius.
open Unit	`setStartHyphenEdit(startHyphen: Int)` Set a start hyphen edit on the paint.
open Unit	`setStrikeThruText(strikeThruText: Boolean)` Helper for setFlags(), setting or clearing the STRIKE_THRU_TEXT_FLAG bit
open Unit	`setStrokeCap(cap: Paint.Cap!)` Set the paint's Cap.
open Unit	`setStrokeJoin(join: Paint.Join!)` Set the paint's Join.
open Unit	`setStrokeMiter(miter: Float)` Set the paint's stroke miter value.
open Unit	`setStrokeWidth(width: Float)` Set the width for stroking.
open Unit	`setStyle(style: Paint.Style!)` Set the paint's style, used for controlling how primitives' geometries are interpreted (except for drawBitmap, which always assumes Fill).
open Unit	`setSubpixelText(subpixelText: Boolean)` Helper for setFlags(), setting or clearing the SUBPIXEL_TEXT_FLAG bit
open Unit	`setTextAlign(align: Paint.Align!)` Set the paint's text alignment.
open Unit	`setTextLocale(locale: Locale)` Set the text locale list to a one-member list consisting of just the locale.
open Unit	`setTextLocales(locales: LocaleList)` Set the text locale list.
open Unit	`setTextScaleX(scaleX: Float)` Set the paint's horizontal scale factor for text.
open Unit	`setTextSize(textSize: Float)` Set the paint's text size.
open Unit	`setTextSkewX(skewX: Float)` Set the paint's horizontal skew factor for text.
open Typeface!	`setTypeface(typeface: Typeface!)` Set or clear the typeface object.
open Unit	`setUnderlineText(underlineText: Boolean)` Helper for setFlags(), setting or clearing the UNDERLINE_TEXT_FLAG bit
open Unit	`setWordSpacing(wordSpacing: Float)` Set the paint's extra word-spacing for text.
open Xfermode!	`setXfermode(xfermode: Xfermode!)` Set or clear the transfer mode object.

Constants

ANTI_ALIAS_FLAG

Added in API level 1

static val ANTI_ALIAS_FLAG: Int

Paint flag that enables antialiasing when drawing.

Enabling this flag will cause all draw operations that support antialiasing to use it.

Notable draw operations that do not support antialiasing include:

android.graphics.Canvas#drawBitmapMesh
android.graphics.Canvas#drawPatch
android.graphics.Canvas#drawVertices

Value: 1

See Also

#Paint(int)
#setFlags(int)

CURSOR_AFTER

Added in API level 29

static val CURSOR_AFTER: Int

Option for getTextRunCursor. Compute the valid cursor after offset or the limit of the context, whichever is less.

Value: 0

CURSOR_AT

Added in API level 29

static val CURSOR_AT: Int

Option for getTextRunCursor. Return offset if the cursor at offset is valid, or -1 if it isn't.

Value: 4

CURSOR_AT_OR_AFTER

Added in API level 29

static val CURSOR_AT_OR_AFTER: Int

Option for getTextRunCursor. Compute the valid cursor at or after the offset or the limit of the context, whichever is less.

Value: 1

CURSOR_AT_OR_BEFORE

Added in API level 29

static val CURSOR_AT_OR_BEFORE: Int

Option for getTextRunCursor. Compute the valid cursor at or before offset or the start of the context, whichever is greater.

Value: 3

CURSOR_BEFORE

Added in API level 29

static val CURSOR_BEFORE: Int

Option for getTextRunCursor. Compute the valid cursor before offset or the start of the context, whichever is greater.

Value: 2

DEV_KERN_TEXT_FLAG

Added in API level 1

static val DEV_KERN_TEXT_FLAG: Int

Legacy Paint flag, no longer used.

Value: 256

DITHER_FLAG

Added in API level 1

static val DITHER_FLAG: Int

Paint flag that enables dithering when blitting.

Enabling this flag applies a dither to any blit operation where the target's colour space is more constrained than the source.

Value: 4

See Also

#Paint(int)
#setFlags(int)

EMBEDDED_BITMAP_TEXT_FLAG

Added in API level 19

static val EMBEDDED_BITMAP_TEXT_FLAG: Int

Paint flag that enables the use of bitmap fonts when drawing text.

Disabling this flag will prevent text draw operations from using embedded bitmap strikes in fonts, causing fonts with both scalable outlines and bitmap strikes to draw only the scalable outlines, and fonts with only bitmap strikes to not draw at all.

Value: 1024

See Also

#Paint(int)
#setFlags(int)

END_HYPHEN_EDIT_INSERT_ARMENIAN_HYPHEN

Added in API level 29

static val END_HYPHEN_EDIT_INSERT_ARMENIAN_HYPHEN: Int

An integer representing the end of the line has Armentian hyphen (U+058A).

Value: 3

END_HYPHEN_EDIT_INSERT_HYPHEN

Added in API level 29

static val END_HYPHEN_EDIT_INSERT_HYPHEN: Int

An integer representing the end of the line has normal hyphen character (U+002D).

Value: 2

END_HYPHEN_EDIT_INSERT_MAQAF

Added in API level 29

static val END_HYPHEN_EDIT_INSERT_MAQAF: Int

An integer representing the end of the line has maqaf (Hebrew hyphen, U+05BE).

Value: 4

END_HYPHEN_EDIT_INSERT_UCAS_HYPHEN

Added in API level 29

static val END_HYPHEN_EDIT_INSERT_UCAS_HYPHEN: Int

An integer representing the end of the line has Canadian Syllabics hyphen (U+1400).

Value: 5

END_HYPHEN_EDIT_INSERT_ZWJ_AND_HYPHEN

Added in API level 29

static val END_HYPHEN_EDIT_INSERT_ZWJ_AND_HYPHEN: Int

An integer representing the end of the line has Zero-Width-Joiner (U+200D) followed by normal hyphen character (U+002D).

Value: 6

END_HYPHEN_EDIT_NO_EDIT

Added in API level 29

static val END_HYPHEN_EDIT_NO_EDIT: Int

An integer representing the end of the line has no modification for hyphenation.

Value: 0

END_HYPHEN_EDIT_REPLACE_WITH_HYPHEN

Added in API level 29

static val END_HYPHEN_EDIT_REPLACE_WITH_HYPHEN: Int

An integer representing the character at the end of the line is replaced with hyphen character (U+002D).

Value: 1

FAKE_BOLD_TEXT_FLAG

Added in API level 1

static val FAKE_BOLD_TEXT_FLAG: Int

Paint flag that applies a synthetic bolding effect to drawn text.

Enabling this flag will cause text draw operations to apply a simulated bold effect when drawing a Typeface that is not already bold.

Value: 32

See Also

#Paint(int)
#setFlags(int)

FILTER_BITMAP_FLAG

Added in API level 1

static val FILTER_BITMAP_FLAG: Int

Paint flag that enables bilinear sampling on scaled bitmaps.

If cleared, scaled bitmaps will be drawn with nearest neighbor sampling, likely resulting in artifacts. This should generally be on when drawing bitmaps, unless performance-bound (rendering to software canvas) or preferring pixelation artifacts to blurriness when scaling significantly.

If bitmaps are scaled for device density at creation time (as resource bitmaps often are) the filtering will already have been done.

On devices running Build.VERSION_CODES#O and below, hardware accelerated drawing always uses bilinear sampling on scaled bitmaps, regardless of this flag. On devices running Build.VERSION_CODES#Q and above, this flag defaults to being set on a new Paint. It can be cleared with setFlags or setFilterBitmap.

Value: 2

See Also

#Paint()
#Paint(int)
#setFlags(int)

HINTING_OFF

Added in API level 14

static val HINTING_OFF: Int

Font hinter option that disables font hinting.

Value: 0

See Also

#setHinting(int)

HINTING_ON

Added in API level 14

static val HINTING_ON: Int

Font hinter option that enables font hinting.

Value: 1

See Also

#setHinting(int)

LINEAR_TEXT_FLAG

Added in API level 1

static val LINEAR_TEXT_FLAG: Int

Paint flag that enables smooth linear scaling of text.

Enabling this flag does not actually scale text, but rather adjusts text draw operations to deal gracefully with smooth adjustment of scale. When this flag is enabled, font hinting is disabled to prevent shape deformation between scale factors, and glyph caching is disabled due to the large number of glyph images that will be generated.

SUBPIXEL_TEXT_FLAG should be used in conjunction with this flag to prevent glyph positions from snapping to whole pixel values as scale factor is adjusted.

Value: 64

See Also

#Paint(int)
#setFlags(int)

START_HYPHEN_EDIT_INSERT_HYPHEN

Added in API level 29

static val START_HYPHEN_EDIT_INSERT_HYPHEN: Int

An integer representing the starting of the line has normal hyphen character (U+002D).

Value: 1

START_HYPHEN_EDIT_INSERT_ZWJ

Added in API level 29

static val START_HYPHEN_EDIT_INSERT_ZWJ: Int

An integer representing the starting of the line has Zero-Width-Joiner (U+200D).

Value: 2

START_HYPHEN_EDIT_NO_EDIT

Added in API level 29

static val START_HYPHEN_EDIT_NO_EDIT: Int

An integer representing the starting of the line has no modification for hyphenation.

Value: 0

STRIKE_THRU_TEXT_FLAG

Added in API level 1

static val STRIKE_THRU_TEXT_FLAG: Int

Paint flag that applies a strike-through decoration to drawn text.

Value: 16

See Also

#Paint(int)
#setFlags(int)

SUBPIXEL_TEXT_FLAG

Added in API level 1

static val SUBPIXEL_TEXT_FLAG: Int

Paint flag that enables subpixel positioning of text.

Enabling this flag causes glyph advances to be computed with subpixel accuracy.

This can be used with LINEAR_TEXT_FLAG to prevent text from jittering during smooth scale transitions.

Value: 128

See Also

#Paint(int)
#setFlags(int)

TEXT_RUN_FLAG_LEFT_EDGE

Added in API level 35

static val TEXT_RUN_FLAG_LEFT_EDGE: Int

A text run flag that indicates the run is located the visually most left segment of the line.

This flag is used for telling the underlying text layout engine that the text is located at the most left of the line. This flag is used for controlling the amount letter spacing added. If the text is in the middle of the line, the text layout engine assigns additional letter spacing to the both side of each letter. On the other hand, the letter spacing should not be added to the visually most left and right of the line. By setting this flag, text layout engine calculates the layout as it is located at the most visually left of the line and doesn't add letter spacing to the left of this run.

Note that the caller must resolve BiDi runs and reorder them visually and set this flag only if the target run is located visually most left position. This left does not always mean the beginning of the text.

If the run covers entire line, caller should set TEXT_RUN_FLAG_RIGHT_EDGE as well.

Note that this flag is only effective for run based APIs. For example, this flag works for Canvas#drawTextRun(CharSequence, int, int, int, int, float, float, boolean, Paint) and Paint#getRunCharacterAdvance(char[], int, int, int, int, boolean, int, float[], int). However, this doesn't work for Canvas#drawText(CharSequence, int, int, float, float, Paint) or Paint#measureText(CharSequence, int, int). The non-run based APIs works as both TEXT_RUN_FLAG_LEFT_EDGE and TEXT_RUN_FLAG_RIGHT_EDGE are specified.

Value: 8192

TEXT_RUN_FLAG_RIGHT_EDGE

Added in API level 35

static val TEXT_RUN_FLAG_RIGHT_EDGE: Int

A text run flag that indicates the run is located the visually most right segment of the line.

This flag is used for telling the underlying text layout engine that the text is located at the most right of the line. This flag is used for controlling the amount letter spacing added. If the text is in the middle of the line, the text layout engine assigns additional letter spacing to the both side of each letter. On the other hand, the letter spacing should not be added to the visually most left and right of the line. By setting this flag, text layout engine calculates the layout as it is located at the most visually left of the line and doesn't add letter spacing to the left of this run.

Note that the caller must resolve BiDi runs and reorder them visually and set this flag only if the target run is located visually most right position. This right does not always mean the end of the text.

If the run covers entire line, caller should set TEXT_RUN_FLAG_LEFT_EDGE as well.

Value: 16384

UNDERLINE_TEXT_FLAG

Added in API level 1

static val UNDERLINE_TEXT_FLAG: Int

Paint flag that applies an underline decoration to drawn text.

Value: 8

See Also

#Paint(int)
#setFlags(int)

Public constructors

Paint

Added in API level 1

Paint()

Create a new paint with default settings.

On devices running Build.VERSION_CODES#O and below, hardware accelerated drawing always acts as if FILTER_BITMAP_FLAG is set. On devices running Build.VERSION_CODES#Q and above, FILTER_BITMAP_FLAG is set by this constructor, and it can be cleared with setFlags or setFilterBitmap. On devices running Build.VERSION_CODES#S and above, ANTI_ALIAS_FLAG is set by this constructor, and it can be cleared with setFlags or setAntiAlias.

Paint

Added in API level 1

Paint(flags: Int)

Create a new paint with the specified flags. Use setFlags() to change these after the paint is created.

On devices running Build.VERSION_CODES#O and below, hardware accelerated drawing always acts as if FILTER_BITMAP_FLAG is set. On devices running Build.VERSION_CODES#Q and above, FILTER_BITMAP_FLAG is always set by this constructor, regardless of the value of flags. It can be cleared with setFlags or setFilterBitmap.

Parameters
`flags`	Int: initial flag bits, as if they were passed via setFlags().

Paint

Added in API level 1

Paint(paint: Paint!)

Create a new paint, initialized with the attributes in the specified paint parameter.

Parameters
`paint`	Paint!: Existing paint used to initialized the attributes of the new paint.

Public methods

ascent

Added in API level 1

open fun ascent(): Float

Return the distance above (negative) the baseline (ascent) based on the current typeface and text size.

Note that this is the ascent of the main typeface, and actual text rendered may need a larger ascent because fallback fonts may get used in rendering the text.

Return
`Float`	the distance above (negative) the baseline (ascent) based on the current typeface and text size.

breakText

Added in API level 1

open fun breakText(
    text: CharArray!, 
    index: Int, 
    count: Int, 
    maxWidth: Float, 
    measuredWidth: FloatArray!
): Int

Measure the text, stopping early if the measured width exceeds maxWidth. Return the number of chars that were measured, and if measuredWidth is not null, return in it the actual width measured.

Parameters
`text`	CharArray!: The text to measure. Cannot be null.
`index`	Int: The offset into text to begin measuring at
`count`	Int: The number of maximum number of entries to measure. If count is negative, then the characters are measured in reverse order.
`maxWidth`	Float: The maximum width to accumulate.
`measuredWidth`	FloatArray!: Optional. If not null, returns the actual width measured.

Return
`Int`	The number of chars that were measured. Will always be <= abs(count).

breakText

Added in API level 1

open fun breakText(
    text: CharSequence!, 
    start: Int, 
    end: Int, 
    measureForwards: Boolean, 
    maxWidth: Float, 
    measuredWidth: FloatArray!
): Int

Measure the text, stopping early if the measured width exceeds maxWidth. Return the number of chars that were measured, and if measuredWidth is not null, return in it the actual width measured.

Parameters
`text`	CharSequence!: The text to measure. Cannot be null.
`start`	Int: The offset into text to begin measuring at
`end`	Int: The end of the text slice to measure.
`measureForwards`	Boolean: If true, measure forwards, starting at start. Otherwise, measure backwards, starting with end.
`maxWidth`	Float: The maximum width to accumulate.
`measuredWidth`	FloatArray!: Optional. If not null, returns the actual width measured.

Return
`Int`	The number of chars that were measured. Will always be <= abs(end - start).

breakText

Added in API level 1

open fun breakText(
    text: String!, 
    measureForwards: Boolean, 
    maxWidth: Float, 
    measuredWidth: FloatArray!
): Int

Measure the text, stopping early if the measured width exceeds maxWidth. Return the number of chars that were measured, and if measuredWidth is not null, return in it the actual width measured.

Parameters
`text`	String!: The text to measure. Cannot be null.
`measureForwards`	Boolean: If true, measure forwards, starting with the first character in the string. Otherwise, measure backwards, starting with the last character in the string.
`maxWidth`	Float: The maximum width to accumulate.
`measuredWidth`	FloatArray!: Optional. If not null, returns the actual width measured.

Return
`Int`	The number of chars that were measured. Will always be <= abs(count).

clearShadowLayer

Added in API level 1

open fun clearShadowLayer(): Unit

Clear the shadow layer.

descent

Added in API level 1

open fun descent(): Float

Return the distance below (positive) the baseline (descent) based on the current typeface and text size.

Note that this is the descent of the main typeface, and actual text rendered may need a larger descent because fallback fonts may get used in rendering the text.

Return
`Float`	the distance below (positive) the baseline (descent) based on the current typeface and text size.

equalsForTextMeasurement

Added in API level 28

open fun equalsForTextMeasurement(other: Paint): Boolean

Returns true of the passed Paint will have the same effect on text measurement

Parameters
`other`	Paint: A `Paint` object. This value cannot be `null`.

Return
`Boolean`	true if the other `Paint` has the same effect on text measurement.

getAlpha

Added in API level 1

open fun getAlpha(): Int

Helper to getColor() that just returns the color's alpha value. This is the same as calling getColor() >>> 24. It always returns a value between 0 (completely transparent) and 255 (completely opaque).

Return
`Int`	the alpha component of the paint's color.

getBlendMode

Added in API level 29

open fun getBlendMode(): BlendMode?

Get the paint's blend mode object.

Return
`BlendMode?`	the paint's blend mode (or null)

getColor

Added in API level 1

open fun getColor(): Int

Return the paint's color in sRGB. Note that the color is a 32bit value containing alpha as well as r,g,b. This 32bit value is not premultiplied, meaning that its alpha can be any value, regardless of the values of r,g,b. See the Color class for more details.

Return
`Int`	the paint's color (and alpha).

getColorFilter

Added in API level 1

open fun getColorFilter(): ColorFilter!

Get the paint's colorfilter (maybe be null).

Return
`ColorFilter!`	the paint's colorfilter (maybe be null)

getColorLong

Added in API level 29

open fun getColorLong(): Long

Return the paint's color. Note that the color is a long with an encoded ColorSpace as well as alpha and r,g,b. These values are not premultiplied, meaning that alpha can be any value, regardless of the values of r,g,b. See the Color class for more details.

Return
`Long`	the paint's color, alpha, and `ColorSpace` encoded as a `ColorLong`

getEndHyphenEdit

Added in API level 29

open fun getEndHyphenEdit(): Int

Get the current value of end hyphen edit. The default value is 0 which is equivalent to END_HYPHEN_EDIT_NO_EDIT.

Return

Int the current starting hyphen edit value Value is android.graphics.Paint#END_HYPHEN_EDIT_NO_EDIT, android.graphics.Paint#END_HYPHEN_EDIT_REPLACE_WITH_HYPHEN, android.graphics.Paint#END_HYPHEN_EDIT_INSERT_HYPHEN, android.graphics.Paint#END_HYPHEN_EDIT_INSERT_ARMENIAN_HYPHEN, android.graphics.Paint#END_HYPHEN_EDIT_INSERT_MAQAF, android.graphics.Paint#END_HYPHEN_EDIT_INSERT_UCAS_HYPHEN, or android.graphics.Paint#END_HYPHEN_EDIT_INSERT_ZWJ_AND_HYPHEN

Return
`Int`	the current starting hyphen edit value Value is `android.graphics.Paint#END_HYPHEN_EDIT_NO_EDIT`, `android.graphics.Paint#END_HYPHEN_EDIT_REPLACE_WITH_HYPHEN`, `android.graphics.Paint#END_HYPHEN_EDIT_INSERT_HYPHEN`, `android.graphics.Paint#END_HYPHEN_EDIT_INSERT_ARMENIAN_HYPHEN`, `android.graphics.Paint#END_HYPHEN_EDIT_INSERT_MAQAF`, `android.graphics.Paint#END_HYPHEN_EDIT_INSERT_UCAS_HYPHEN`, or `android.graphics.Paint#END_HYPHEN_EDIT_INSERT_ZWJ_AND_HYPHEN`

See Also

#setStartHyphenEdit(int)

getFillPath

Added in API level 1

open fun getFillPath(
    src: Path!, 
    dst: Path!
): Boolean

Applies any/all effects (patheffect, stroking) to src, returning the result in dst. The result is that drawing src with this paint will be the same as drawing dst with a default paint (at least from the geometric perspective).

Parameters
`src`	Path!: input path
`dst`	Path!: output path (may be the same as src)

Return
`Boolean`	true if the path should be filled, or false if it should be drawn with a hairline (width == 0)

getFlags

Added in API level 1

open fun getFlags(): Int

Return the paint's flags. Use the Flag enum to test flag values.

Return

Int the paint's flags (see enums ending in _Flag for bit masks) Value is either 0 or a combination of android.graphics.Paint#ANTI_ALIAS_FLAG, android.graphics.Paint#FILTER_BITMAP_FLAG, android.graphics.Paint#DITHER_FLAG, android.graphics.Paint#UNDERLINE_TEXT_FLAG, android.graphics.Paint#STRIKE_THRU_TEXT_FLAG, android.graphics.Paint#FAKE_BOLD_TEXT_FLAG, android.graphics.Paint#LINEAR_TEXT_FLAG, android.graphics.Paint#SUBPIXEL_TEXT_FLAG, android.graphics.Paint#EMBEDDED_BITMAP_TEXT_FLAG, android.graphics.Paint#TEXT_RUN_FLAG_LEFT_EDGE, and android.graphics.Paint#TEXT_RUN_FLAG_RIGHT_EDGE

Return
`Int`	the paint's flags (see enums ending in _Flag for bit masks) Value is either `0` or a combination of `android.graphics.Paint#ANTI_ALIAS_FLAG`, `android.graphics.Paint#FILTER_BITMAP_FLAG`, `android.graphics.Paint#DITHER_FLAG`, `android.graphics.Paint#UNDERLINE_TEXT_FLAG`, `android.graphics.Paint#STRIKE_THRU_TEXT_FLAG`, `android.graphics.Paint#FAKE_BOLD_TEXT_FLAG`, `android.graphics.Paint#LINEAR_TEXT_FLAG`, `android.graphics.Paint#SUBPIXEL_TEXT_FLAG`, `android.graphics.Paint#EMBEDDED_BITMAP_TEXT_FLAG`, `android.graphics.Paint#TEXT_RUN_FLAG_LEFT_EDGE`, and `android.graphics.Paint#TEXT_RUN_FLAG_RIGHT_EDGE`

getFontFeatureSettings

Added in API level 21

open fun getFontFeatureSettings(): String!

Returns the font feature settings. The format is the same as the CSS font-feature-settings attribute: https://www.w3.org/TR/css-fonts-3/#font-feature-settings-prop

Return
`String!`	the paint's currently set font feature settings. Default is null.

See Also

#setFontFeatureSettings(String)

getFontMetrics

Added in API level 1

open fun getFontMetrics(metrics: Paint.FontMetrics!): Float

Return the font's recommended interline spacing, given the Paint's settings for typeface, textSize, etc. If metrics is not null, return the fontmetric values in it.

Note that these are the values for the main typeface, and actual text rendered may need a larger set of values because fallback fonts may get used in rendering the text.

Parameters
`metrics`	Paint.FontMetrics!: If this object is not null, its fields are filled with the appropriate values given the paint's text attributes.

Return
`Float`	the font's recommended interline spacing.

getFontMetrics

Added in API level 1

open fun getFontMetrics(): Paint.FontMetrics!

Allocates a new FontMetrics object, and then calls getFontMetrics(fm) with it, returning the object.

getFontMetricsForLocale

Added in API level 35

open fun getFontMetricsForLocale(metrics: Paint.FontMetrics): Unit

Get the font metrics used for the locale Obtain the metrics of the font that is used for the specified locale by setTextLocales(android.os.LocaleList). If multiple locales are specified, the minimum ascent and maximum descent will be set. This API is useful for determining the default line height of the empty text field, e.g. android.widget.EditText. Note, if the android.graphics.Typeface is created from the custom font files, its metrics are reserved, i.e. the ascent will be the custom font's ascent or smaller, the descent will be the custom font's descent or larger. Note, if the android.graphics.Typeface is a system fallback, e.g. android.graphics.Typeface#SERIF, the default font's metrics are reserved, i.e. the ascent will be the serif font's ascent or smaller, the descent will be the serif font's descent or larger.

Parameters
`metrics`	Paint.FontMetrics: an output parameter. All members will be set by calling this function. This value cannot be `null`.

getFontMetricsInt

Added in API level 33

open fun getFontMetricsInt(
    text: CharSequence, 
    start: Int, 
    count: Int, 
    contextStart: Int, 
    contextCount: Int, 
    isRtl: Boolean, 
    outMetrics: Paint.FontMetricsInt
): Unit

Returns the font metrics value for the given text. If the text is rendered with multiple font files, this function returns the large ascent and descent that are enough for drawing all font files. The context range is used for shaping context. Some script, e.g. Arabic or Devanagari, changes letter shape based on its location or surrounding characters.

Parameters
`text`	CharSequence: a text to be measured. This value cannot be `null`.
`start`	Int: a starting offset in the text. Value is 0 or greater
`count`	Int: a length of the text to be measured. Value is 0 or greater
`contextStart`	Int: a context starting offset in the text. Value is 0 or greater
`contextCount`	Int: a length of the context to be used. Value is 0 or greater
`isRtl`	Boolean: true if measuring on RTL context, otherwise false.
`outMetrics`	Paint.FontMetricsInt: the output font metrics. This value cannot be `null`.

getFontMetricsInt

Added in API level 33

open fun getFontMetricsInt(
    text: CharArray, 
    start: Int, 
    count: Int, 
    contextStart: Int, 
    contextCount: Int, 
    isRtl: Boolean, 
    outMetrics: Paint.FontMetricsInt
): Unit

Parameters
`text`	CharArray: a text to be measured. This value cannot be `null`.
`start`	Int: a starting offset in the text. Value is 0 or greater
`count`	Int: a length of the text to be measured. Value is 0 or greater
`contextStart`	Int: a context starting offset in the text. Value is 0 or greater
`contextCount`	Int: a length of the context to be used. Value is 0 or greater
`isRtl`	Boolean: true if measuring on RTL context, otherwise false.
`outMetrics`	Paint.FontMetricsInt: the output font metrics. This value cannot be `null`.

getFontMetricsInt

Added in API level 1

open fun getFontMetricsInt(fmi: Paint.FontMetricsInt!): Int

Return the font's interline spacing, given the Paint's settings for typeface, textSize, etc. If metrics is not null, return the fontmetric values in it. Note: all values have been converted to integers from floats, in such a way has to make the answers useful for both spacing and clipping. If you want more control over the rounding, call getFontMetrics().

Note that these are the values for the main typeface, and actual text rendered may need a larger set of values because fallback fonts may get used in rendering the text.

Return
`Int`	the font's interline spacing.

getFontMetricsInt

Added in API level 1

open fun getFontMetricsInt(): Paint.FontMetricsInt!

getFontMetricsIntForLocale

Added in API level 35

open fun getFontMetricsIntForLocale(metrics: Paint.FontMetricsInt): Unit

Parameters
`metrics`	Paint.FontMetricsInt: an output parameter. All members will be set by calling this function. This value cannot be `null`.

getFontSpacing

Added in API level 1

open fun getFontSpacing(): Float

Return the recommend line spacing based on the current typeface and text size.

Note that this is the value for the main typeface, and actual text rendered may need a larger value because fallback fonts may get used in rendering the text.

Return
`Float`	recommend line spacing based on the current typeface and text size.

getFontVariationSettings

Added in API level 26

open fun getFontVariationSettings(): String!

Returns the font variation settings.

Return
`String!`	the paint's currently set font variation settings. Default is null.

See Also

#setFontVariationSettings(String)

getHinting

Added in API level 14

open fun getHinting(): Int

Return the paint's hinting mode. Returns either HINTING_OFF or HINTING_ON.

getLetterSpacing

Added in API level 21

open fun getLetterSpacing(): Float

Return the paint's letter-spacing for text. The default value is 0.

Return
`Float`	the paint's letter-spacing for drawing text.

getMaskFilter

Added in API level 1

open fun getMaskFilter(): MaskFilter!

Get the paint's maskfilter object.

Return
`MaskFilter!`	the paint's maskfilter (or null)

getOffsetForAdvance

Added in API level 23

open fun getOffsetForAdvance(
    text: CharArray!, 
    start: Int, 
    end: Int, 
    contextStart: Int, 
    contextEnd: Int, 
    isRtl: Boolean, 
    advance: Float
): Int

Get the character offset within the string whose position is closest to the specified horizontal position.

The returned value is generally the value of offset for which #getRunAdvance yields a result most closely approximating advance, and which is also on a grapheme cluster boundary. As such, it is the preferred method for positioning a cursor in response to a touch or pointer event. The grapheme cluster boundaries are based on Unicode Standard Annex #29 but with some tailoring for better user experience.

Note that advance is a (generally positive) width measurement relative to the start of the run. Thus, for RTL runs it the distance from the point to the right edge.

All indices are relative to the start of text. Further, 0 <= contextStart <= start <= end <= contextEnd <= text.length must hold on entry, and start <= result <= end will hold on return.

Parameters
`text`	CharArray!: the text to measure. Cannot be null.
`start`	Int: the index of the start of the range to measure
`end`	Int: the index + 1 of the end of the range to measure
`contextStart`	Int: the index of the start of the shaping context
`contextEnd`	Int: the index + 1 of the end of the range to measure
`isRtl`	Boolean: whether the run is in RTL direction
`advance`	Float: width relative to start of run

Return
`Int`	index of offset

getOffsetForAdvance

Added in API level 23

open fun getOffsetForAdvance(
    text: CharSequence!, 
    start: Int, 
    end: Int, 
    contextStart: Int, 
    contextEnd: Int, 
    isRtl: Boolean, 
    advance: Float
): Int

Parameters
`text`	CharSequence!: the text to measure. Cannot be null.
`start`	Int: the index of the start of the range to measure
`end`	Int: the index + 1 of the end of the range to measure
`contextStart`	Int: the index of the start of the shaping context
`contextEnd`	Int: the index + 1 of the end of the range to measure
`isRtl`	Boolean: whether the run is in RTL direction
`advance`	Float: width relative to start of run

Return
`Int`	index of offset

See Also

#getOffsetForAdvance(char[], int, int, int, int, boolean, float)

getPathEffect

Added in API level 1

open fun getPathEffect(): PathEffect!

Get the paint's patheffect object.

Return
`PathEffect!`	the paint's patheffect (or null)

getRunAdvance

Added in API level 23

open fun getRunAdvance(
    text: CharArray!, 
    start: Int, 
    end: Int, 
    contextStart: Int, 
    contextEnd: Int, 
    isRtl: Boolean, 
    offset: Int
): Float

Measure cursor position within a run of text.

The run of text includes the characters from start to end in the text. In addition, the range contextStart to contextEnd is used as context for the purpose of complex text shaping, such as Arabic text potentially shaped differently based on the text next to it.

All text outside the range contextStart..contextEnd is ignored. The text between start and end will be laid out to be measured.

The returned width measurement is the advance from start to offset. It is generally a positive value, no matter the direction of the run. If offset == end, the return value is simply the width of the whole run from start to end.

Ligatures are formed for characters in the range start..end (but not for start..contextStart or end..contextEnd). If offset points to a character in the middle of such a formed ligature, but at a grapheme cluster boundary, the return value will also reflect an advance in the middle of the ligature. See #getOffsetForAdvance for more discussion of grapheme cluster boundaries.

The direction of the run is explicitly specified by isRtl. Thus, this method is suitable only for runs of a single direction.

All indices are relative to the start of text. Further, 0 <= contextStart <= start <= offset <= end <= contextEnd <= text.length must hold on entry.

Parameters
`text`	CharArray!: the text to measure. Cannot be null.
`start`	Int: the index of the start of the range to measure
`end`	Int: the index + 1 of the end of the range to measure
`contextStart`	Int: the index of the start of the shaping context
`contextEnd`	Int: the index + 1 of the end of the shaping context
`isRtl`	Boolean: whether the run is in RTL direction
`offset`	Int: index of caret position

Return
`Float`	width measurement between start and offset

getRunAdvance

Added in API level 23

open fun getRunAdvance(
    text: CharSequence!, 
    start: Int, 
    end: Int, 
    contextStart: Int, 
    contextEnd: Int, 
    isRtl: Boolean, 
    offset: Int
): Float

Parameters
`text`	CharSequence!: the text to measure. Cannot be null.
`start`	Int: the index of the start of the range to measure
`end`	Int: the index + 1 of the end of the range to measure
`contextStart`	Int: the index of the start of the shaping context
`contextEnd`	Int: the index + 1 of the end of the shaping context
`isRtl`	Boolean: whether the run is in RTL direction
`offset`	Int: index of caret position

Return
`Float`	width measurement between start and offset

See Also

#getRunAdvance(char[], int, int, int, int, boolean, int)

getRunCharacterAdvance

Added in API level 34

open fun getRunCharacterAdvance(
    text: CharArray, 
    start: Int, 
    end: Int, 
    contextStart: Int, 
    contextEnd: Int, 
    isRtl: Boolean, 
    offset: Int, 
    advances: FloatArray?, 
    advancesIndex: Int
): Float

Measure the advance of each character within a run of text and also return the cursor position within the run.

Parameters
`text`	CharArray: the text to measure. Cannot be null.
`start`	Int: the start index of the range to measure, inclusive
`end`	Int: the end index of the range to measure, exclusive
`contextStart`	Int: the start index of the shaping context, inclusive
`contextEnd`	Int: the end index of the shaping context, exclusive
`isRtl`	Boolean: whether the run is in RTL direction
`offset`	Int: index of caret position
`advances`	FloatArray?: the array that receives the computed character advances This value may be `null`.
`advancesIndex`	Int: the start index from which the advances array is filled

Return
`Float`	width measurement between start and offset

Exceptions
`java.lang.IndexOutOfBoundsException`	if a) contextStart or contextEnd is out of array's range or contextStart is larger than contextEnd, b) start or end is not within the range [contextStart, contextEnd), or start is larger than end, c) offset is not within the range [start, end), d) advances.length - advanceIndex is smaller than the length of the run, which equals to end - start.

See Also

#getRunAdvance(char[], int, int, int, int, boolean, int)

getRunCharacterAdvance

Added in API level 34

open fun getRunCharacterAdvance(
    text: CharSequence, 
    start: Int, 
    end: Int, 
    contextStart: Int, 
    contextEnd: Int, 
    isRtl: Boolean, 
    offset: Int, 
    advances: FloatArray?, 
    advancesIndex: Int
): Float

Parameters
`text`	CharSequence: the text to measure. Cannot be null.
`start`	Int: the index of the start of the range to measure
`end`	Int: the index + 1 of the end of the range to measure
`contextStart`	Int: the index of the start of the shaping context
`contextEnd`	Int: the index + 1 of the end of the shaping context
`isRtl`	Boolean: whether the run is in RTL direction
`offset`	Int: index of caret position
`advances`	FloatArray?: the array that receives the computed character advances This value may be `null`.
`advancesIndex`	Int: the start index from which the advances array is filled

Return
`Float`	width measurement between start and offset

Exceptions
`java.lang.IndexOutOfBoundsException`	if a) contextStart or contextEnd is out of array's range or contextStart is larger than contextEnd, b) start or end is not within the range [contextStart, contextEnd), or end is larger than start, c) offset is not within the range [start, end), d) advances.length - advanceIndex is smaller than the run length, which equals to end - start.

See Also

#getRunCharacterAdvance(char[], int, int, int, int, boolean, int, float[], int)

getShader

Added in API level 1

open fun getShader(): Shader!

Get the paint's shader object.

Return
`Shader!`	the paint's shader (or null)

getShadowLayerColor

Added in API level 29

open fun getShadowLayerColor(): Int

Returns the color of the shadow layer.

See Also

#setShadowLayer(float,float,float,int)
#setShadowLayer(float,float,float,long)

getShadowLayerColorLong

Added in API level 29

open fun getShadowLayerColorLong(): Long

Returns the color of the shadow layer.

Return
`Long`	the shadow layer's color encoded as a `ColorLong`.

See Also

#setShadowLayer(float,float,float,int)
#setShadowLayer(float,float,float,long)
android.graphics.Color

getShadowLayerDx

Added in API level 29

open fun getShadowLayerDx(): Float

Returns the x offset of the shadow layer.

See Also

#setShadowLayer(float,float,float,int)
#setShadowLayer(float,float,float,long)

getShadowLayerDy

Added in API level 29

open fun getShadowLayerDy(): Float

Returns the y offset of the shadow layer.

See Also

#setShadowLayer(float,float,float,int)
#setShadowLayer(float,float,float,long)

getShadowLayerRadius

Added in API level 29

open fun getShadowLayerRadius(): Float

Returns the blur radius of the shadow layer.

See Also

#setShadowLayer(float,float,float,int)
#setShadowLayer(float,float,float,long)

getStartHyphenEdit

Added in API level 29

open fun getStartHyphenEdit(): Int

Get the current value of start hyphen edit. The default value is 0 which is equivalent to START_HYPHEN_EDIT_NO_EDIT.

Return
`Int`	the current starting hyphen edit value Value is `android.graphics.Paint#START_HYPHEN_EDIT_NO_EDIT`, `android.graphics.Paint#START_HYPHEN_EDIT_INSERT_HYPHEN`, or `android.graphics.Paint#START_HYPHEN_EDIT_INSERT_ZWJ`

See Also

#setStartHyphenEdit(int)

getStrikeThruPosition

Added in API level 29

open fun getStrikeThruPosition(): Float

Distance from top of the strike-through line to the baseline in pixels. The result is negative for positions that are above the baseline. This method returns where the strike-through line should be drawn independent of if the STRIKE_THRU_TEXT_FLAG bit is set.
The units of this value are pixels.

Return
`Float`	the position of the strike-through line in pixels The units of this value are pixels. {}

See Also

#getStrikeThruThickness()
#setStrikeThruText(boolean)
#isStrikeThruText()

getStrikeThruThickness

Added in API level 29

open fun getStrikeThruThickness(): Float

Returns the thickness of the strike-through line in pixels.
The units of this value are pixels.

Return
`Float`	the position of the strike-through line in pixels The units of this value are pixels. {}

See Also

#getStrikeThruPosition()
#setStrikeThruText(boolean)
#isStrikeThruText()

getStrokeCap

Added in API level 1

open fun getStrokeCap(): Paint.Cap!

Return the paint's Cap, controlling how the start and end of stroked lines and paths are treated.

Return
`Paint.Cap!`	the line cap style for the paint, used whenever the paint's style is Stroke or StrokeAndFill.

getStrokeJoin

Added in API level 1

open fun getStrokeJoin(): Paint.Join!

Return the paint's stroke join type.

Return
`Paint.Join!`	the paint's Join.

getStrokeMiter

Added in API level 1

open fun getStrokeMiter(): Float

Return the paint's stroke miter value. Used to control the behavior of miter joins when the joins angle is sharp.

Return
`Float`	the paint's miter limit, used whenever the paint's style is Stroke or StrokeAndFill.

getStrokeWidth

Added in API level 1

open fun getStrokeWidth(): Float

Return the width for stroking.

A value of 0 strokes in hairline mode. Hairlines always draws a single pixel independent of the canvas's matrix.

Return
`Float`	the paint's stroke width, used whenever the paint's style is Stroke or StrokeAndFill.

getStyle

Added in API level 1

open fun getStyle(): Paint.Style!

Return the paint's style, used for controlling how primitives' geometries are interpreted (except for drawBitmap, which always assumes FILL_STYLE).

Return
`Paint.Style!`	the paint's style setting (Fill, Stroke, StrokeAndFill)

getTextAlign

Added in API level 1

open fun getTextAlign(): Paint.Align!

Return the paint's Align value for drawing text. This controls how the text is positioned relative to its origin. LEFT align means that all of the text will be drawn to the right of its origin (i.e. the origin specifies the LEFT edge of the text) and so on.

Return
`Paint.Align!`	the paint's Align value for drawing text.

getTextBounds

Added in API level 1

open fun getTextBounds(
    text: String!, 
    start: Int, 
    end: Int, 
    bounds: Rect!
): Unit

Retrieve the text boundary box and store to bounds. Return in bounds (allocated by the caller) the smallest rectangle that encloses all of the characters, with an implied origin at (0,0).

Parameters
`text`	String!: string to measure and return its bounds
`start`	Int: index of the first char in the string to measure
`end`	Int: 1 past the last char in the string to measure
`bounds`	Rect!: returns the unioned bounds of all the text. Must be allocated by the caller

getTextBounds

Added in API level 29

open fun getTextBounds(
    text: CharSequence, 
    start: Int, 
    end: Int, 
    bounds: Rect
): Unit

Retrieve the text boundary box and store to bounds. Return in bounds (allocated by the caller) the smallest rectangle that encloses all of the characters, with an implied origin at (0,0). Note that styles are ignored even if you pass android.text.Spanned instance. Use android.text.StaticLayout for measuring bounds of android.text.Spanned.

Parameters
`text`	CharSequence: text to measure and return its bounds This value cannot be `null`.
`start`	Int: index of the first char in the text to measure
`end`	Int: 1 past the last char in the text to measure
`bounds`	Rect: returns the unioned bounds of all the text. Must be allocated by the caller This value cannot be `null`.

getTextBounds

Added in API level 1

open fun getTextBounds(
    text: CharArray!, 
    index: Int, 
    count: Int, 
    bounds: Rect!
): Unit

Return in bounds (allocated by the caller) the smallest rectangle that encloses all of the characters, with an implied origin at (0,0).

Parameters
`text`	CharArray!: array of chars to measure and return their unioned bounds
`index`	Int: index of the first char in the array to measure
`count`	Int: the number of chars, beginning at index, to measure
`bounds`	Rect!: returns the unioned bounds of all the text. Must be allocated by the caller

getTextLocale

Added in API level 17

open fun getTextLocale(): Locale

Get the text's primary Locale. Note that this is not all of the locale-related information Paint has. Use getTextLocales() to get the complete list.

Return
`Locale`	the paint's primary Locale used for drawing text, never null.

getTextLocales

Added in API level 24

open fun getTextLocales(): LocaleList

Get the text locale list.

Return
`LocaleList`	the paint's LocaleList used for drawing text, never null or empty.

getTextPath

Added in API level 1

open fun getTextPath(
    text: CharArray!, 
    index: Int, 
    count: Int, 
    x: Float, 
    y: Float, 
    path: Path!
): Unit

Return the path (outline) for the specified text. Note: just like Canvas.drawText, this will respect the Align setting in the paint.

Parameters
`text`	CharArray!: the text to retrieve the path from
`index`	Int: the index of the first character in text
`count`	Int: the number of characters starting with index
`x`	Float: the x coordinate of the text's origin
`y`	Float: the y coordinate of the text's origin
`path`	Path!: the path to receive the data describing the text. Must be allocated by the caller

getTextPath

Added in API level 1

open fun getTextPath(
    text: String!, 
    start: Int, 
    end: Int, 
    x: Float, 
    y: Float, 
    path: Path!
): Unit

Return the path (outline) for the specified text. Note: just like Canvas.drawText, this will respect the Align setting in the paint.

Parameters
`text`	String!: the text to retrieve the path from
`start`	Int: the first character in the text
`end`	Int: 1 past the last character in the text
`x`	Float: the x coordinate of the text's origin
`y`	Float: the y coordinate of the text's origin
`path`	Path!: the path to receive the data describing the text. Must be allocated by the caller

getTextRunAdvances

Added in API level 29

open fun getTextRunAdvances(
    chars: CharArray, 
    index: Int, 
    count: Int, 
    contextIndex: Int, 
    contextCount: Int, 
    isRtl: Boolean, 
    advances: FloatArray?, 
    advancesIndex: Int
): Float

Retrieve the character advances of the text. Returns the total advance width for the characters in the run from index for count of chars, and if advances is not null, the advance assigned to each of these characters (java chars).

The trailing surrogate in a valid surrogate pair is assigned an advance of 0. Thus the number of returned advances is always equal to count, not to the number of unicode codepoints represented by the run.

In the case of conjuncts or combining marks, the total advance is assigned to the first logical character, and the following characters are assigned an advance of 0.

This generates the sum of the advances of glyphs for characters in a reordered cluster as the width of the first logical character in the cluster, and 0 for the widths of all other characters in the cluster. In effect, such clusters are treated like conjuncts.

The shaping bounds limit the amount of context available outside start and end that can be used for shaping analysis. These bounds typically reflect changes in bidi level or font metrics across which shaping does not occur.

Parameters
`chars`	CharArray: the text to measure. This value cannot be `null`.
`index`	Int: the index of the first character to measure Value is 0 or greater
`count`	Int: the number of characters to measure Value is 0 or greater
`contextIndex`	Int: the index of the first character to use for shaping context. Context must cover the measureing target. Value is 0 or greater
`contextCount`	Int: the number of character to use for shaping context. Context must cover the measureing target. Value is 0 or greater
`isRtl`	Boolean: whether the run is in RTL direction
`advances`	FloatArray?: array to receive the advances, must have room for all advances. This can be null if only total advance is needed
`advancesIndex`	Int: the position in advances at which to put the advance corresponding to the character at start Value is 0 or greater

Return
`Float`	the total advance in pixels

getTextRunCursor

Added in API level 29

open fun getTextRunCursor(
    text: CharArray, 
    contextStart: Int, 
    contextLength: Int, 
    isRtl: Boolean, 
    offset: Int, 
    cursorOpt: Int
): Int

Returns the next cursor position in the run. This avoids placing the cursor between surrogates, between characters that form conjuncts, between base characters and combining marks, or within a reordering cluster.

ContextStart and offset are relative to the start of text. The context is the shaping context for cursor movement, generally the bounds of the metric span enclosing the cursor in the direction of movement.

If cursorOpt is CURSOR_AT and the offset is not a valid cursor position, this returns -1. Otherwise this will never return a value before contextStart or after contextStart + contextLength.

Parameters
`text`	CharArray: the text This value cannot be `null`.
`contextStart`	Int: the start of the context Value is 0 or greater
`contextLength`	Int: the length of the context Value is 0 or greater
`isRtl`	Boolean: true if the paragraph context is RTL, otherwise false
`offset`	Int: the cursor position to move from Value is 0 or greater
`cursorOpt`	Int: how to move the cursor Value is `android.graphics.Paint#CURSOR_AFTER`, `android.graphics.Paint#CURSOR_AT_OR_AFTER`, `android.graphics.Paint#CURSOR_BEFORE`, or `android.graphics.Paint#CURSOR_AT_OR_BEFORE`

Return
`Int`	the offset of the next position, or -1

getTextRunCursor

Added in API level 29

open fun getTextRunCursor(
    text: CharSequence, 
    contextStart: Int, 
    contextEnd: Int, 
    isRtl: Boolean, 
    offset: Int, 
    cursorOpt: Int
): Int

ContextStart, contextEnd, and offset are relative to the start of text. The context is the shaping context for cursor movement, generally the bounds of the metric span enclosing the cursor in the direction of movement.

If cursorOpt is CURSOR_AT and the offset is not a valid cursor position, this returns -1. Otherwise this will never return a value before contextStart or after contextEnd.

Parameters
`text`	CharSequence: the text This value cannot be `null`.
`contextStart`	Int: the start of the context Value is 0 or greater
`contextEnd`	Int: the end of the context Value is 0 or greater
`isRtl`	Boolean: true if the paragraph context is RTL, otherwise false
`offset`	Int: the cursor position to move from Value is 0 or greater
`cursorOpt`	Int: how to move the cursor Value is `android.graphics.Paint#CURSOR_AFTER`, `android.graphics.Paint#CURSOR_AT_OR_AFTER`, `android.graphics.Paint#CURSOR_BEFORE`, or `android.graphics.Paint#CURSOR_AT_OR_BEFORE`

Return
`Int`	the offset of the next position, or -1

getTextScaleX

Added in API level 1

open fun getTextScaleX(): Float

Return the paint's horizontal scale factor for text. The default value is 1.0.

Return
`Float`	the paint's scale factor in X for drawing/measuring text

getTextSize

Added in API level 1

open fun getTextSize(): Float

Return the paint's text size.

Return
`Float`	the paint's text size in pixel units.

getTextSkewX

Added in API level 1

open fun getTextSkewX(): Float

Return the paint's horizontal skew factor for text. The default value is 0.

Return
`Float`	the paint's skew factor in X for drawing text.

getTextWidths

Added in API level 1

open fun getTextWidths(
    text: CharArray!, 
    index: Int, 
    count: Int, 
    widths: FloatArray!
): Int

Return the advance widths for the characters in the string.

Parameters
`text`	CharArray!: The text to measure. Cannot be null.
`index`	Int: The index of the first char to to measure
`count`	Int: The number of chars starting with index to measure
`widths`	FloatArray!: array to receive the advance widths of the characters. Must be at least a large as count.

Return
`Int`	the actual number of widths returned.

getTextWidths

Added in API level 1

open fun getTextWidths(
    text: CharSequence!, 
    start: Int, 
    end: Int, 
    widths: FloatArray!
): Int

Return the advance widths for the characters in the string.

Parameters
`text`	CharSequence!: The text to measure. Cannot be null.
`start`	Int: The index of the first char to to measure
`end`	Int: The end of the text slice to measure
`widths`	FloatArray!: array to receive the advance widths of the characters. Must be at least a large as (end - start).

Return
`Int`	the actual number of widths returned.

getTextWidths

Added in API level 1

open fun getTextWidths(
    text: String!, 
    start: Int, 
    end: Int, 
    widths: FloatArray!
): Int

Return the advance widths for the characters in the string.

Parameters
`text`	String!: The text to measure. Cannot be null.
`start`	Int: The index of the first char to to measure
`end`	Int: The end of the text slice to measure
`widths`	FloatArray!: array to receive the advance widths of the characters. Must be at least a large as the text.

Return
`Int`	the number of code units in the specified text.

getTextWidths

Added in API level 1

open fun getTextWidths(
    text: String!, 
    widths: FloatArray!
): Int

Return the advance widths for the characters in the string.

Parameters
`text`	String!: The text to measure
`widths`	FloatArray!: array to receive the advance widths of the characters. Must be at least a large as the text.

Return
`Int`	the number of code units in the specified text.

getTypeface

Added in API level 1

open fun getTypeface(): Typeface!

Get the paint's typeface object.

The typeface object identifies which font to use when drawing or measuring text.

Return
`Typeface!`	the paint's typeface (or null)

getUnderlinePosition

Added in API level 29

open fun getUnderlinePosition(): Float

Returns the distance from top of the underline to the baseline in pixels. The result is positive for positions that are below the baseline. This method returns where the underline should be drawn independent of if the UNDERLINE_TEXT_FLAG bit is set.
The units of this value are pixels.

Return
`Float`	the position of the underline in pixels The units of this value are pixels. {}

See Also

#isUnderlineText()
#getUnderlineThickness()
#setUnderlineText(boolean)

getUnderlineThickness

Added in API level 29

open fun getUnderlineThickness(): Float

Returns the thickness of the underline in pixels.
The units of this value are pixels.

Return
`Float`	the thickness of the underline in pixels The units of this value are pixels. {}

See Also

#isUnderlineText()
#getUnderlinePosition()
#setUnderlineText(boolean)

getWordSpacing

Added in API level 29

open fun getWordSpacing(): Float

Return the paint's extra word-spacing for text. The default value is 0.
The units of this value are pixels.

Return
`Float`	the paint's extra word-spacing for drawing text in pixels. The units of this value are pixels. {}

See Also

#setWordSpacing(float)

getXfermode

Added in API level 1

open fun getXfermode(): Xfermode!

Get the paint's transfer mode object.

Return
`Xfermode!`	the paint's transfer mode (or null)

hasGlyph

Added in API level 23

open fun hasGlyph(string: String!): Boolean

Determine whether the typeface set on the paint has a glyph supporting the string. The simplest case is when the string contains a single character, in which this method determines whether the font has the character. In the case of multiple characters, the method returns true if there is a single glyph representing the ligature. For example, if the input is a pair of regional indicator symbols, determine whether there is an emoji flag for the pair.

Finally, if the string contains a variation selector, the method only returns true if the fonts contains a glyph specific to that variation.

Checking is done on the entire fallback chain, not just the immediate font referenced.

Parameters
`string`	String!: the string to test whether there is glyph support

Return
`Boolean`	true if the typeface has a glyph for the string

isAntiAlias

Added in API level 1

fun isAntiAlias(): Boolean

Helper for getFlags(), returning true if ANTI_ALIAS_FLAG bit is set AntiAliasing smooths out the edges of what is being drawn, but is has no impact on the interior of the shape. See setDither() and setFilterBitmap() to affect how colors are treated.

Return
`Boolean`	true if the antialias bit is set in the paint's flags.

isDither

Added in API level 1

fun isDither(): Boolean

Helper for getFlags(), returning true if DITHER_FLAG bit is set Dithering affects how colors that are higher precision than the device are down-sampled. No dithering is generally faster, but higher precision colors are just truncated down (e.g. 8888 -> 565). Dithering tries to distribute the error inherent in this process, to reduce the visual artifacts.

Return
`Boolean`	true if the dithering bit is set in the paint's flags.

isElegantTextHeight

Added in API level 21

open fun isElegantTextHeight(): Boolean

Get the elegant metrics flag.

Return
`Boolean`	true if elegant metrics are enabled for text drawing.

isFakeBoldText

Added in API level 1

fun isFakeBoldText(): Boolean

Helper for getFlags(), returning true if FAKE_BOLD_TEXT_FLAG bit is set

Return
`Boolean`	true if the fakeBoldText bit is set in the paint's flags.

isFilterBitmap

Added in API level 1

fun isFilterBitmap(): Boolean

Whether or not the bitmap filter is activated. Filtering affects the sampling of bitmaps when they are transformed. Filtering does not affect how the colors in the bitmap are converted into device pixels. That is dependent on dithering and xfermodes.

See Also

#setFilterBitmap(boolean)
#FILTER_BITMAP_FLAG

isLinearText

Added in API level 1

fun isLinearText(): Boolean

Helper for getFlags(), returning true if LINEAR_TEXT_FLAG bit is set

Return
`Boolean`	true if the lineartext bit is set in the paint's flags

isStrikeThruText

Added in API level 1

fun isStrikeThruText(): Boolean

Helper for getFlags(), returning true if STRIKE_THRU_TEXT_FLAG bit is set

Return
`Boolean`	true if the `STRIKE_THRU_TEXT_FLAG` bit is set in the paint's flags.

See Also

#getStrikeThruPosition()
#getStrikeThruThickness()
#setStrikeThruText(boolean)

isSubpixelText

Added in API level 1

fun isSubpixelText(): Boolean

Helper for getFlags(), returning true if SUBPIXEL_TEXT_FLAG bit is set

Return
`Boolean`	true if the subpixel bit is set in the paint's flags

isUnderlineText

Added in API level 1

fun isUnderlineText(): Boolean

Helper for getFlags(), returning true if UNDERLINE_TEXT_FLAG bit is set

Return
`Boolean`	true if the underlineText bit is set in the paint's flags.

See Also

#getUnderlinePosition()
#getUnderlineThickness()
#setUnderlineText(boolean)

measureText

Added in API level 1

open fun measureText(
    text: CharArray!, 
    index: Int, 
    count: Int
): Float

Return the width of the text.

Parameters
`text`	CharArray!: The text to measure. Cannot be null.
`index`	Int: The index of the first character to start measuring
`count`	Int: THe number of characters to measure, beginning with start

Return
`Float`	The width of the text

measureText

Added in API level 1

open fun measureText(
    text: String!, 
    start: Int, 
    end: Int
): Float

Return the width of the text.

Parameters
`text`	String!: The text to measure. Cannot be null.
`start`	Int: The index of the first character to start measuring
`end`	Int: 1 beyond the index of the last character to measure

Return
`Float`	The width of the text

measureText

Added in API level 1

open fun measureText(text: String!): Float

Return the width of the text.

Parameters
`text`	String!: The text to measure. Cannot be null.

Return
`Float`	The width of the text

measureText

Added in API level 1

open fun measureText(
    text: CharSequence!, 
    start: Int, 
    end: Int
): Float

Return the width of the text.

Parameters
`text`	CharSequence!: The text to measure
`start`	Int: The index of the first character to start measuring
`end`	Int: 1 beyond the index of the last character to measure

Return
`Float`	The width of the text

reset

Added in API level 1

open fun reset(): Unit

Restores the paint to its default settings.

set

Added in API level 1

open fun set(src: Paint!): Unit

Copy the fields from src into this paint. This is equivalent to calling get() on all of the src fields, and calling the corresponding set() methods on this.

setARGB

Added in API level 1

open fun setARGB(
    a: Int, 
    r: Int, 
    g: Int, 
    b: Int
): Unit

Helper to setColor(), that takes a,r,g,b and constructs the color int

Parameters
`a`	Int: The new alpha component (0..255) of the paint's color.
`r`	Int: The new red component (0..255) of the paint's color.
`g`	Int: The new green component (0..255) of the paint's color.
`b`	Int: The new blue component (0..255) of the paint's color.

setAlpha

Added in API level 1

open fun setAlpha(a: Int): Unit

Helper to setColor(), that only assigns the color's alpha value, leaving its r,g,b values unchanged. Results are undefined if the alpha value is outside of the range [0..255]

Parameters
`a`	Int: set the alpha component [0..255] of the paint's color.

setAntiAlias

Added in API level 1

open fun setAntiAlias(aa: Boolean): Unit

Helper for setFlags(), setting or clearing the ANTI_ALIAS_FLAG bit AntiAliasing smooths out the edges of what is being drawn, but is has no impact on the interior of the shape. See setDither() and setFilterBitmap() to affect how colors are treated.

Parameters
`aa`	Boolean: true to set the antialias bit in the flags, false to clear it

setBlendMode

Added in API level 29

open fun setBlendMode(blendmode: BlendMode?): Unit

Set or clear the blend mode. A blend mode defines how source pixels (generated by a drawing command) are composited with the destination pixels (content of the render target).

Pass null to clear any previous blend mode.

Parameters
`blendmode`	BlendMode?: May be null. The blend mode to be installed in the paint

See Also

android.graphics.BlendMode

setColor

Added in API level 1

open fun setColor(color: Int): Unit

Set the paint's color. Note that the color is an int containing alpha as well as r,g,b. This 32bit value is not premultiplied, meaning that its alpha can be any value, regardless of the values of r,g,b. See the Color class for more details.

Parameters
`color`	Int: The new color (including alpha) to set in the paint.

setColor

Added in API level 29

open fun setColor(color: Long): Unit

Set the paint's color with a ColorLong. Note that the color is a long with an encoded ColorSpace as well as alpha and r,g,b. These values are not premultiplied, meaning that alpha can be any value, regardless of the values of r,g,b. See the Color class for more details.

Parameters
`color`	Long: The new color (including alpha and `ColorSpace`) to set in the paint.

Exceptions
`java.lang.IllegalArgumentException`	if the color space encoded in the `ColorLong` is invalid or unknown.

setColorFilter

Added in API level 1

open fun setColorFilter(filter: ColorFilter!): ColorFilter!

Set or clear the paint's colorfilter, returning the parameter.

Parameters
`filter`	ColorFilter!: May be null. The new filter to be installed in the paint

Return
`ColorFilter!`	filter

setDither

Added in API level 1

open fun setDither(dither: Boolean): Unit

Helper for setFlags(), setting or clearing the DITHER_FLAG bit Dithering affects how colors that are higher precision than the device are down-sampled. No dithering is generally faster, but higher precision colors are just truncated down (e.g. 8888 -> 565). Dithering tries to distribute the error inherent in this process, to reduce the visual artifacts.

Parameters
`dither`	Boolean: true to set the dithering bit in flags, false to clear it

setElegantTextHeight

Added in API level 21

open fun setElegantTextHeight(elegant: Boolean): Unit

Set the paint's elegant height metrics flag. This setting selects font variants that have not been compacted to fit Latin-based vertical metrics, and also increases top and bottom bounds to provide more space.

Parameters
`elegant`	Boolean: set the paint's elegant metrics flag for drawing text.

setEndHyphenEdit

Added in API level 29

open fun setEndHyphenEdit(endHyphen: Int): Unit

Set a end hyphen edit on the paint. By setting end hyphen edit, the measurement and drawing is performed with modifying hyphenation at the end of line. For example, by passing END_HYPHEN_EDIT_INSERT_HYPHEN like as follows, HYPHEN(U+2010) character is appended at the end of line.

<code>
    Paint paint = new Paint();
    paint.setEndHyphenEdit(Paint.END_HYPHEN_EDIT_INSERT_HYPHEN);
    paint.measureText("abc", 0, 3);  // Returns the width of "abc-"
    Canvas.drawText("abc", 0, 3, 0f, 0f, paint);  // Draws "abc-"
  </code>

The default value is 0 which is equivalent to END_HYPHEN_EDIT_NO_EDIT.

Parameters

endHyphen Int: a end hyphen edit value. Value is android.graphics.Paint#END_HYPHEN_EDIT_NO_EDIT, android.graphics.Paint#END_HYPHEN_EDIT_REPLACE_WITH_HYPHEN, android.graphics.Paint#END_HYPHEN_EDIT_INSERT_HYPHEN, android.graphics.Paint#END_HYPHEN_EDIT_INSERT_ARMENIAN_HYPHEN, android.graphics.Paint#END_HYPHEN_EDIT_INSERT_MAQAF, android.graphics.Paint#END_HYPHEN_EDIT_INSERT_UCAS_HYPHEN, or android.graphics.Paint#END_HYPHEN_EDIT_INSERT_ZWJ_AND_HYPHEN

See Also

#getEndHyphenEdit()

setFakeBoldText

Added in API level 1

open fun setFakeBoldText(fakeBoldText: Boolean): Unit

Helper for setFlags(), setting or clearing the FAKE_BOLD_TEXT_FLAG bit

Parameters
`fakeBoldText`	Boolean: true to set the fakeBoldText bit in the paint's flags, false to clear it.

setFilterBitmap

Added in API level 1

open fun setFilterBitmap(filter: Boolean): Unit

Helper for setFlags(), setting or clearing the FILTER_BITMAP_FLAG bit. Filtering affects the sampling of bitmaps when they are transformed. Filtering does not affect how the colors in the bitmap are converted into device pixels. That is dependent on dithering and xfermodes.

Parameters
`filter`	Boolean: true to set the FILTER_BITMAP_FLAG bit in the paint's flags, false to clear it.

See Also

#FILTER_BITMAP_FLAG

setFlags

Added in API level 1

open fun setFlags(flags: Int): Unit

Set the paint's flags. Use the Flag enum to specific flag values.

Parameters

flags Int: The new flag bits for the paint Value is either 0 or a combination of android.graphics.Paint#ANTI_ALIAS_FLAG, android.graphics.Paint#FILTER_BITMAP_FLAG, android.graphics.Paint#DITHER_FLAG, android.graphics.Paint#UNDERLINE_TEXT_FLAG, android.graphics.Paint#STRIKE_THRU_TEXT_FLAG, android.graphics.Paint#FAKE_BOLD_TEXT_FLAG, android.graphics.Paint#LINEAR_TEXT_FLAG, android.graphics.Paint#SUBPIXEL_TEXT_FLAG, android.graphics.Paint#EMBEDDED_BITMAP_TEXT_FLAG, android.graphics.Paint#TEXT_RUN_FLAG_LEFT_EDGE, and android.graphics.Paint#TEXT_RUN_FLAG_RIGHT_EDGE

setFontFeatureSettings

Added in API level 21

open fun setFontFeatureSettings(settings: String!): Unit

Set font feature settings. The format is the same as the CSS font-feature-settings attribute: https://www.w3.org/TR/css-fonts-3/#font-feature-settings-prop

Parameters
`settings`	String!: the font feature settings string to use, may be null.

See Also

#getFontFeatureSettings()

setFontVariationSettings

Added in API level 26

open fun setFontVariationSettings(fontVariationSettings: String!): Boolean

Sets TrueType or OpenType font variation settings. The settings string is constructed from multiple pairs of axis tag and style values. The axis tag must contain four ASCII characters and must be wrapped with single quotes (U+0027) or double quotes (U+0022). Axis strings that are longer or shorter than four characters, or contain characters outside of U+0020..U+007E are invalid. If a specified axis name is not defined in the font, the settings will be ignored. Examples,

Set font width to 150.

<code>
    Paint paint = new Paint();
    paint.setFontVariationSettings("'wdth' 150");
  </code>

Set the font slant to 20 degrees and ask for italic style.

<code>
    Paint paint = new Paint();
    paint.setFontVariationSettings("'slnt' 20, 'ital' 1");
  </code>

Parameters
`fontVariationSettings`	String!: font variation settings. You can pass null or empty string as no variation settings.

Return
`Boolean`	true if the given settings is effective to at least one font file underlying this typeface. This function also returns true for empty settings string. Otherwise returns false

Exceptions
`java.lang.IllegalArgumentException`	If given string is not a valid font variation settings format

See Also

setHinting

Added in API level 14

open fun setHinting(mode: Int): Unit

Set the paint's hinting mode. May be either HINTING_OFF or HINTING_ON.

setLetterSpacing

Added in API level 21

open fun setLetterSpacing(letterSpacing: Float): Unit

Set the paint's letter-spacing for text. The default value is 0. The value is in 'EM' units. Typical values for slight expansion will be around 0.05. Negative values tighten text.

Parameters
`letterSpacing`	Float: set the paint's letter-spacing for drawing text.

setLinearText

Added in API level 1

open fun setLinearText(linearText: Boolean): Unit

Helper for setFlags(), setting or clearing the LINEAR_TEXT_FLAG bit

Parameters
`linearText`	Boolean: true to set the linearText bit in the paint's flags, false to clear it.

setMaskFilter

Added in API level 1

open fun setMaskFilter(maskfilter: MaskFilter!): MaskFilter!

Set or clear the maskfilter object.

Pass null to clear any previous maskfilter. As a convenience, the parameter passed is also returned.

Parameters
`maskfilter`	MaskFilter!: May be null. The maskfilter to be installed in the paint

Return
`MaskFilter!`	maskfilter

setPathEffect

Added in API level 1

open fun setPathEffect(effect: PathEffect!): PathEffect!

Set or clear the patheffect object.

Pass null to clear any previous patheffect. As a convenience, the parameter passed is also returned.

Parameters
`effect`	PathEffect!: May be null. The patheffect to be installed in the paint

Return
`PathEffect!`	effect

setShader

Added in API level 1

open fun setShader(shader: Shader!): Shader!

Set or clear the shader object.

Pass null to clear any previous shader. As a convenience, the parameter passed is also returned.

Parameters
`shader`	Shader!: May be null. the new shader to be installed in the paint

Return
`Shader!`	shader

setShadowLayer

Added in API level 1

open fun setShadowLayer(
    radius: Float, 
    dx: Float, 
    dy: Float, 
    shadowColor: Int
): Unit

This draws a shadow layer below the main layer, with the specified offset and color, and blur radius. If radius is 0, then the shadow layer is removed.

Can be used to create a blurred shadow underneath text. Support for use with other drawing operations is constrained to the software rendering pipeline.

The alpha of the shadow will be the paint's alpha if the shadow color is opaque, or the alpha from the shadow color if not.

setShadowLayer

Added in API level 29

open fun setShadowLayer(
    radius: Float, 
    dx: Float, 
    dy: Float, 
    shadowColor: Long
): Unit

This draws a shadow layer below the main layer, with the specified offset and color, and blur radius. If radius is 0, then the shadow layer is removed.

Can be used to create a blurred shadow underneath text. Support for use with other drawing operations is constrained to the software rendering pipeline.

The alpha of the shadow will be the paint's alpha if the shadow color is opaque, or the alpha from the shadow color if not.

Exceptions
`java.lang.IllegalArgumentException`	if the color space encoded in the `ColorLong` is invalid or unknown.

setStartHyphenEdit

Added in API level 29

open fun setStartHyphenEdit(startHyphen: Int): Unit

Set a start hyphen edit on the paint. By setting start hyphen edit, the measurement and drawing is performed with modifying hyphenation at the start of line. For example, by passing START_HYPHEN_EDIT_INSERT_HYPHEN like as follows, HYPHEN(U+2010) character is appended at the start of line.

<code>
    Paint paint = new Paint();
    paint.setStartHyphenEdit(Paint.START_HYPHEN_EDIT_INSERT_HYPHEN);
    paint.measureText("abc", 0, 3);  // Returns the width of "-abc"
    Canvas.drawText("abc", 0, 3, 0f, 0f, paint);  // Draws "-abc"
  </code>

The default value is 0 which is equivalent to START_HYPHEN_EDIT_NO_EDIT.

Parameters
`startHyphen`	Int: a start hyphen edit value. Value is `android.graphics.Paint#START_HYPHEN_EDIT_NO_EDIT`, `android.graphics.Paint#START_HYPHEN_EDIT_INSERT_HYPHEN`, or `android.graphics.Paint#START_HYPHEN_EDIT_INSERT_ZWJ`

See Also

#getStartHyphenEdit()

setStrikeThruText

Added in API level 1

open fun setStrikeThruText(strikeThruText: Boolean): Unit

Helper for setFlags(), setting or clearing the STRIKE_THRU_TEXT_FLAG bit

Parameters
`strikeThruText`	Boolean: true to set the strikeThruText bit in the paint's flags, false to clear it.

See Also

#getStrikeThruPosition()
#getStrikeThruThickness()
#isStrikeThruText()

setStrokeCap

Added in API level 1

open fun setStrokeCap(cap: Paint.Cap!): Unit

Set the paint's Cap.

Parameters
`cap`	Paint.Cap!: set the paint's line cap style, used whenever the paint's style is Stroke or StrokeAndFill.

setStrokeJoin

Added in API level 1

open fun setStrokeJoin(join: Paint.Join!): Unit

Set the paint's Join.

Parameters
`join`	Paint.Join!: set the paint's Join, used whenever the paint's style is Stroke or StrokeAndFill.

setStrokeMiter

Added in API level 1

open fun setStrokeMiter(miter: Float): Unit

Set the paint's stroke miter value. This is used to control the behavior of miter joins when the joins angle is sharp. This value must be >= 0.

Parameters
`miter`	Float: set the miter limit on the paint, used whenever the paint's style is Stroke or StrokeAndFill.

setStrokeWidth

Added in API level 1

open fun setStrokeWidth(width: Float): Unit

Set the width for stroking. Pass 0 to stroke in hairline mode. Hairlines always draws a single pixel independent of the canvas's matrix.

Parameters
`width`	Float: set the paint's stroke width, used whenever the paint's style is Stroke or StrokeAndFill.

setStyle

Added in API level 1

open fun setStyle(style: Paint.Style!): Unit

Set the paint's style, used for controlling how primitives' geometries are interpreted (except for drawBitmap, which always assumes Fill).

Parameters
`style`	Paint.Style!: The new style to set in the paint

setSubpixelText

Added in API level 1

open fun setSubpixelText(subpixelText: Boolean): Unit

Helper for setFlags(), setting or clearing the SUBPIXEL_TEXT_FLAG bit

Parameters
`subpixelText`	Boolean: true to set the subpixelText bit in the paint's flags, false to clear it.

setTextAlign

Added in API level 1

open fun setTextAlign(align: Paint.Align!): Unit

Set the paint's text alignment. This controls how the text is positioned relative to its origin. LEFT align means that all of the text will be drawn to the right of its origin (i.e. the origin specifies the LEFT edge of the text) and so on.

Parameters
`align`	Paint.Align!: set the paint's Align value for drawing text.

setTextLocale

Added in API level 17

open fun setTextLocale(locale: Locale): Unit

Set the text locale list to a one-member list consisting of just the locale. See setTextLocales(android.os.LocaleList) for how the locale list affects the way the text is drawn for some languages.

Parameters
`locale`	Locale: the paint's locale value for drawing text, must not be null.

setTextLocales

Added in API level 24

open fun setTextLocales(locales: LocaleList): Unit

Set the text locale list. The text locale list affects how the text is drawn for some languages. For example, if the locale list contains Locale#CHINESE or Locale#CHINA, then the text renderer will prefer to draw text using a Chinese font. Likewise, if the locale list contains Locale#JAPANESE or Locale#JAPAN, then the text renderer will prefer to draw text using a Japanese font. If the locale list contains both, the order those locales appear in the list is considered for deciding the font. This distinction is important because Chinese and Japanese text both use many of the same Unicode code points but their appearance is subtly different for each language. By default, the text locale list is initialized to a one-member list just containing the system locales. This assumes that the text to be rendered will most likely be in the user's preferred language. If the actual language or languages of the text is/are known, then they can be provided to the text renderer using this method. The text renderer may attempt to guess the language script based on the contents of the text to be drawn independent of the text locale here. Specifying the text locales just helps it do a better job in certain ambiguous cases.

Parameters
`locales`	LocaleList: the paint's locale list for drawing text, must not be null or empty.

setTextScaleX

Added in API level 1

open fun setTextScaleX(scaleX: Float): Unit

Set the paint's horizontal scale factor for text. The default value is 1.0. Values > 1.0 will stretch the text wider. Values < 1.0 will stretch the text narrower.

Parameters
`scaleX`	Float: set the paint's scale in X for drawing/measuring text.

setTextSize

Added in API level 1

open fun setTextSize(textSize: Float): Unit

Set the paint's text size. This value must be > 0

Parameters
`textSize`	Float: set the paint's text size in pixel units.

setTextSkewX

Added in API level 1

open fun setTextSkewX(skewX: Float): Unit

Set the paint's horizontal skew factor for text. The default value is 0. For approximating oblique text, use values around -0.25.

Parameters
`skewX`	Float: set the paint's skew factor in X for drawing text.

setTypeface

Added in API level 1

open fun setTypeface(typeface: Typeface!): Typeface!

Set or clear the typeface object.

Pass null to clear any previous typeface. As a convenience, the parameter passed is also returned.

Parameters
`typeface`	Typeface!: May be null. The typeface to be installed in the paint

Return
`Typeface!`	typeface

setUnderlineText

Added in API level 1

open fun setUnderlineText(underlineText: Boolean): Unit

Helper for setFlags(), setting or clearing the UNDERLINE_TEXT_FLAG bit

Parameters
`underlineText`	Boolean: true to set the underlineText bit in the paint's flags, false to clear it.

See Also

#isUnderlineText()
#getUnderlinePosition()
#getUnderlineThickness()

setWordSpacing

Added in API level 29

open fun setWordSpacing(wordSpacing: Float): Unit

Set the paint's extra word-spacing for text. Increases the white space width between words with the given amount of pixels. The default value is 0.

Parameters
`wordSpacing`	Float: set the paint's extra word-spacing for drawing text in pixels. The units of this value are pixels.

See Also

#getWordSpacing()

setXfermode

Added in API level 1

open fun setXfermode(xfermode: Xfermode!): Xfermode!

Set or clear the transfer mode object. A transfer mode defines how source pixels (generate by a drawing command) are composited with the destination pixels (content of the render target).

Pass null to clear any previous transfer mode. As a convenience, the parameter passed is also returned.

PorterDuffXfermode is the most common transfer mode.

Parameters
`xfermode`	Xfermode!: May be null. The xfermode to be installed in the paint

Return
`Xfermode!`	xfermode