Display content edge-to-edge in your app and handle window insets in Compose

The Android platform is responsible for drawing the system UI, such as the status bar and navigation bar. This system UI is displayed regardless of which app the user is using.

WindowInsets provides information about the system UI to ensure that your app draws in the correct area and your UI isn't obscured by the system UI.

On Android 14 (API level 34) and lower, your app's UI does not draw underneath the system bars and display cutouts by default.

On Android 15 (API level 35) and higher, your app draws underneath the system bars and display cutouts once your app targets SDK 35. This results in a more seamless user experience and allows your app to take full advantage of the window space available to it.

Displaying content behind the system UI is called going edge-to-edge. On this page, you learn about the different types of insets, how to go edge-to-edge, and how to use the inset APIs to animate your UI and ensure your app's content isn't obscured by system UI elements.

Inset fundamentals

When an app goes edge-to-edge, you need to ensure that important content and interactions are not obscured by the system UI. For example, if a button is placed behind the navigation bar, the user may not be able to click it.

The size of the system UI and information about where it is placed is specified via insets.

Each portion of the system UI has a corresponding type of inset that describes its size and where it is placed. For example, status bar insets provide the size and position of the status bar, whereas the navigation bar insets provide the size and position of the navigation bar. Each type of inset consists of four pixel dimensions: top, left, right, and bottom. These dimensions specify how far the system UI extends from the corresponding sides of the app's window. To avoid overlapping with that type of system UI, therefore, app UI must be inset by that amount.

These built-in Android inset types are available through WindowInsets:

These types are summarized by three "safe" inset types that ensure content isn't obscured:

• WindowInsets.safeDrawing
• WindowInsets.safeGestures
• WindowInsets.safeContent

These "safe" inset types protect content in different ways, based on the underlying platform insets:

• Use WindowInsets.safeDrawing to protect content that shouldn't be drawn underneath any system UI. This is the most common usage of insets: to prevent drawing content that is obscured by the system UI (either partially or completely).
• Use WindowInsets.safeGestures to protect content with gestures. This avoids system gestures clashing with app gestures (such as those for bottom sheets, carousels, or in games).
• Use WindowInsets.safeContent as a combination of WindowInsets.safeDrawing and WindowInsets.safeGestures to ensure content has no visual overlap and no gesture overlap.

Insets setup

To allow your app full control over where it draws content, follow these setup steps. Without these steps, your app may draw black or solid colors behind the system UI, or not animate synchronously with the software keyboard.

1. Target SDK 35 or later to enforce edge-to-edge on Android 15 and higher. Your app displays behind the system UI. You can adjust your app's UI by handling insets.
2. Optionally, call enableEdgeToEdge() in Activity.onCreate(), which allows your app to be edge-to-edge on previous Android versions.

3. Set android:windowSoftInputMode="adjustResize" in your Activity's AndroidManifest.xml entry. This setting allows your app to receive the size of the software IME as insets, which you can use to pad and lay out content appropriately when the IME appears and disappears in your app.

   <!-- in your AndroidManifest.xml file: -->
   <activity
     android:name=".ui.MainActivity"
     android:label="@string/app_name"
     android:windowSoftInputMode="adjustResize"
     android:theme="@style/Theme.MyApplication"
     android:exported="true">
   

Compose APIs

Once your Activity has taken control of handling all insets, you can use Compose APIs to ensure that content isn't obscured and interactable elements don't overlap with the system UI. These APIs also synchronize your app's layout with inset changes.

For example, this is the most basic method of applying the insets to the content of your entire app:

override fun onCreate(savedInstanceState: Bundle?) {
    super.onCreate(savedInstanceState)

    enableEdgeToEdge()

    setContent {
        Box(Modifier.safeDrawingPadding()) {
            // the rest of the app
        }
    }
}
InsetsSnippets.kt

This snippet applies the safeDrawing window insets as padding around the entire content of the app. While this ensures that interactable elements don't overlap with the system UI, it also means that none of the app will draw behind the system UI to achieve an edge-to-edge effect. To make full use of the entire window, you need to fine-tune where the insets are applied on a screen-by-screen or component-by-component basis.

All of these inset types are animated automatically with IME animations backported to API 21. By extension, all of your layouts using these insets are also automatically animated as the inset values change.

There are two primary ways to use these inset types to adjust your Composable layouts: padding modifiers and inset size modifiers.

Padding modifiers

Modifier.windowInsetsPadding(windowInsets: WindowInsets) applies the given window insets as padding, acting just like Modifier.padding would. For example, Modifier.windowInsetsPadding(WindowInsets.safeDrawing) applies the safe drawing insets as padding on all 4 sides.

There are also several built-in utility methods for the most common inset types. Modifier.safeDrawingPadding() is one such method, equivalent to Modifier.windowInsetsPadding(WindowInsets.safeDrawing). There are analogous modifiers for the other inset types.

Inset size modifiers

The following modifiers apply an amount of window insets by setting the size of the component to be the size of the insets:

These modifiers are especially useful for sizing a Spacer that takes up the space of insets:

LazyColumn(
    Modifier.imePadding()
) {
    // Other content
    item {
        Spacer(
            Modifier.windowInsetsBottomHeight(
                WindowInsets.systemBars
            )
        )
    }
}
InsetsSnippets.kt

Inset consumption

The inset padding modifiers (windowInsetsPadding and helpers like safeDrawingPadding) automatically consume the portion of the insets that are applied as padding. While going deeper into the composition tree, nested inset padding modifiers and the inset size modifiers know that some portion of the insets have already been consumed by outer inset padding modifiers, and avoid using the same portion of the insets more than once which would result in too much extra space.

Inset size modifiers also avoid using the same portion of insets more than once if insets have already been consumed. However, since they are changing their size directly, they don't consume insets themselves.

As a result, nesting padding modifiers automatically change the amount of padding applied to each composable.

Looking at the same LazyColumn example as before, the LazyColumn is being resized by the imePadding modifier. Inside the LazyColumn, the last item is sized to be the height of the bottom of the system bars:

LazyColumn(
    Modifier.imePadding()
) {
    // Other content
    item {
        Spacer(
            Modifier.windowInsetsBottomHeight(
                WindowInsets.systemBars
            )
        )
    }
}
InsetsSnippets.kt

When the IME is closed, the imePadding() modifier applies no padding, since the IME has no height. Since the imePadding() modifier is applying no padding, no insets are being consumed, and the height of the Spacer will be the size of the bottom side of the system bars.

When the IME opens, the IME insets animate to match the size of the IME, and the imePadding() modifier begins applying bottom padding to resize the LazyColumn as the IME opens. As the imePadding() modifier begins applying bottom padding, it also starts consuming that amount of insets. Therefore, the height of the Spacer starts to decrease, as part of the spacing for the system bars has already been applied by the imePadding() modifier. Once the imePadding() modifier is applying an amount of bottom padding that is larger than the system bars, the height of the Spacer is zero.

When the IME closes, the changes happen in reverse: The Spacer starts to expand from a height of zero once the imePadding() is applying less than the bottom side of the system bars, until finally the Spacer matches the height of the bottom side of the system bars once the IME is completely animated out.

This behavior is accomplished through communication between all windowInsetsPadding modifiers, and can be influenced in a couple of other ways.

Modifier.consumeWindowInsets(insets: WindowInsets) also consumes insets in the same way as Modifier.windowInsetsPadding, but it doesn't apply the consumed insets as padding. This is useful in combination with the inset size modifiers, to indicate to siblings that a certain amount of insets have already been consumed:

Column(Modifier.verticalScroll(rememberScrollState())) {
    Spacer(Modifier.windowInsetsTopHeight(WindowInsets.systemBars))

    Column(
        Modifier.consumeWindowInsets(
            WindowInsets.systemBars.only(WindowInsetsSides.Vertical)
        )
    ) {
        // content
        Spacer(Modifier.windowInsetsBottomHeight(WindowInsets.ime))
    }

    Spacer(Modifier.windowInsetsBottomHeight(WindowInsets.systemBars))
}
InsetsSnippets.kt

Modifier.consumeWindowInsets(paddingValues: PaddingValues) behaves very similarly to the version with a WindowInsets argument, but takes an arbitrary PaddingValues to consume. This is useful for informing children when padding or spacing is provided by some other mechanism than the inset padding modifiers, such as an ordinary Modifier.padding or fixed height spacers:

Column(Modifier.padding(16.dp).consumeWindowInsets(PaddingValues(16.dp))) {
    // content
    Spacer(Modifier.windowInsetsBottomHeight(WindowInsets.ime))
}
InsetsSnippets.kt

In cases where the raw window insets are needed without consumption, use the WindowInsets values directly, or use WindowInsets.asPaddingValues() to return a PaddingValues of the insets that are unaffected by consumption. However, due to the caveats below, prefer to use the window insets padding modifiers and window insets size modifiers wherever possible.

Insets and Jetpack Compose phases

Compose uses the underlying AndroidX core APIs to update and animate insets, which use the underlying platform APIs managing insets. Because of that platform behavior, insets have a special relationship with the phases of Jetpack Compose.

The value of insets are updated after the composition phase, but before the layout phase. This means that reading the value of insets in composition generally uses a value of the insets that is one frame late. The built-in modifiers described on this page are built to delay using the values of the insets until the layout phase, which ensures that the inset values are used on the same frame as they are updated.

Keyboard IME animations with WindowInsets

You can apply Modifier.imeNestedScroll() to a scrolling container to open and close the IME automatically when scrolling to the bottom of the container.

class WindowInsetsExampleActivity : AppCompatActivity() {
    override fun onCreate(savedInstanceState: Bundle?) {
        super.onCreate(savedInstanceState)

        WindowCompat.setDecorFitsSystemWindows(window, false)

        setContent {
            MaterialTheme {
                MyScreen()
            }
        }
    }
}

@OptIn(ExperimentalLayoutApi::class)
@Composable
fun MyScreen() {
    Box {
        LazyColumn(
            modifier = Modifier
                .fillMaxSize() // fill the entire window
                .imePadding() // padding for the bottom for the IME
                .imeNestedScroll(), // scroll IME at the bottom
            content = { }
        )
        FloatingActionButton(
            modifier = Modifier
                .align(Alignment.BottomEnd)
                .padding(16.dp) // normal 16dp of padding for FABs
                .navigationBarsPadding() // padding for navigation bar
                .imePadding(), // padding for when IME appears
            onClick = { }
        ) {
            Icon(imageVector = Icons.Filled.Add, contentDescription = "Add")
        }
    }
}
MigrationOtherConsiderationsSnippets.kt

Inset support for Material 3 Components

For ease of use, many of the built-in Material 3 composables (androidx.compose.material3) handle insets themselves, based on how the composables are placed in your app according to the Material specifications.

Inset handling composables

Below is a list of the Material Components that automatically handle insets.

App bars

• TopAppBar / SmallTopAppBar / CenterAlignedTopAppBar / MediumTopAppBar / LargeTopAppBar: Applies the top and horizontal sides of the system bars as padding since it is used at the top of the window.
• BottomAppBar: Applies the bottom and horizontal sides of the system bars as padding.

Content containers

• ModalDrawerSheet / DismissibleDrawerSheet / PermanentDrawerSheet (content inside a modal navigation drawer): Applies vertical and start insets to content.
• ModalBottomSheet: Applies the bottom insets.
• NavigationBar : Applies the bottom and horizontal insets.
• NavigationRail: Applies the vertical and start insets.

Scaffold

By default, Scaffold provides insets as parameter paddingValues for you to consume and use. Scaffold does not apply the insets to content; this responsibility is yours. For example, to consume these insets with a LazyColumn inside a Scaffold:

Scaffold { innerPadding ->
    // innerPadding contains inset information for you to use and apply
    LazyColumn(
        // consume insets as scaffold doesn't do it by default
        modifier = Modifier.consumeWindowInsets(innerPadding),
        contentPadding = innerPadding
    ) {
        items(count = 100) {
            Box(
                Modifier
                    .fillMaxWidth()
                    .height(50.dp)
                    .background(colors[it % colors.size])
            )
        }
    }
}
InsetsSnippets.kt

Override default insets

You can change the windowInsets parameter passed to the composable to configure the composable's behavior. This parameter can be a different type of window inset to apply instead, or disabled by passing an empty instance: WindowInsets(0, 0, 0, 0).

For example, to disable the inset handling on LargeTopAppBar, set the windowInsets parameter to an empty instance:

LargeTopAppBar(
    windowInsets = WindowInsets(0, 0, 0, 0),
    title = {
        Text("Hi")
    }
)
InsetsSnippets.kt

Interop with the View system insets

If your app contains both Compose and View code, you may need to be explicit about which system insets each one should consume and ensure that insets are dispatched to sibling views.

Overriding default insets

You may need to override default insets when your screen has both Views and Compose code in the same hierarchy. In this case, you need to be explicit in which one should consume the insets, and which one should ignore them.

For example, if your outermost layout is an Android View layout, you should consume the insets in the View system and ignore them for Compose. Alternatively, if your outermost layout is a composable, you should consume the insets in Compose, and pad the AndroidView composables accordingly.

By default, each ComposeView consumes all insets at the WindowInsetsCompat level of consumption. To change this default behavior, set ComposeView.consumeWindowInsets to false.

Backward compatible inset dispatching for views

If your app contains Views code, you may need to confirm that insets are dispatched to sibling views on devices that run Android 10 (API level 29) or lower. See the edge-to-edge Views guide for more information.

System bar icons

Calling enableEdgeToEdge ensures system bar icon colors update when the device theme changes.

While going edge-to-edge, you might need to manually update the system bar icon colors so they contrast with your app's background. For example, to create light status bar icons:

WindowCompat.getInsetsController(window, window.decorView)
    .isAppearanceLightStatusBars = false

WindowCompat.getInsetsController(window, window.getDecorView())
    .setAppearanceLightStatusBars(false);

System bar protection

Once your app targets SDK 35 or later, edge-to-edge is enforced. The system status bar and gesture navigation bars are transparent, but the three-button navigation bar is translucent.

To remove the default translucent three-button navigation background protection, set Window.setNavigationBarContrastEnforced to false.

Resources

• Android system bars, system bar design guidance
• Now in Android — a fully functional Android app built entirely with Kotlin and Jetpack Compose.
• Handle edge-to-edge enforcements in Android 15 — a codelab walking through the Android 15 edge-to-edge enforcement
• Insets handling tips for Android 15's edge-to-edge enforcement
• Preview and test your app's edge-to-edge UI
• 3 things to improve your Android app experience: Edge to Edge, Predictive Back, and Glance — a YouTube video speaking to the Android 15 edge-to-edge enforcement
• Edge-to-edge and insets | Compose Tips — a YouTube video showing how to handle insets to draw edge-to-edge