Tiện ích bộ sưu tập chuyên hiển thị nhiều phần tử cùng loại, chẳng hạn như dưới dạng bộ sưu tập hình ảnh từ ứng dụng thư viện, bài viết từ ứng dụng tin tức, hoặc tin nhắn từ một ứng dụng liên lạc. Các tiện ích thu thập thường tập trung vào 2 hoạt động sử dụng trường hợp: duyệt qua bộ sưu tập và mở một phần tử của bộ sưu tập vào chế độ xem chi tiết. Tiện ích Bộ sưu tập có thể cuộn theo chiều dọc.
Các tiện ích này sử dụng
RemoteViewsService
để hiển thị
các bộ sưu tập được dữ liệu từ xa hỗ trợ, chẳng hạn như từ một nội dung
Google Workspace. Tiện ích này sẽ hiển thị
bằng cách sử dụng một trong các kiểu khung hiển thị sau, được gọi là bộ sưu tập
lượt xem:
ListView
- Một thành phần hiển thị các mục trong một danh sách cuộn theo chiều dọc.
GridView
- Một thành phần hiển thị các mục trong một lưới cuộn hai chiều.
StackView
- Một thẻ xếp chồng chế độ xem—giống như một trò chơi rolodex—nơi người dùng có thể xoay mặt trước lên hoặc xuống để xem thẻ trước đó hoặc thẻ tiếp theo tương ứng.
AdapterViewFlipper
- An
đơn giản dựa trên bộ chuyển đổi
ViewAnimator
tạo hiệu ứng động từ 2 chế độ xem trở lên. Mỗi lần chỉ có một trẻ xuất hiện.
Vì các chế độ xem bộ sưu tập này hiển thị các bộ sưu tập được dữ liệu từ xa hỗ trợ, nên chúng
sử dụng Adapter
để liên kết người dùng
vào dữ liệu của họ. Adapter
liên kết các mục riêng lẻ từ một tập dữ liệu
với các đối tượng View
riêng lẻ.
Vì các thành phần hiển thị bộ sưu tập này được hỗ trợ bởi các bộ chuyển đổi, nên khung Android
phải có cấu trúc bổ sung để hỗ trợ việc sử dụng chúng trong tiện ích. Theo bối cảnh
của một tiện ích, Adapter
sẽ được thay thế bằng
RemoteViewsFactory
,
là một trình bao bọc mỏng xung quanh giao diện Adapter
. Khi được yêu cầu cho một
một mục cụ thể trong bộ sưu tập, RemoteViewsFactory
sẽ tạo và trả về
mục cho bộ sưu tập dưới dạng
Đối tượng RemoteViews
. Để đưa vào
chế độ xem bộ sưu tập trong tiện ích của bạn, hãy triển khai RemoteViewsService
và
RemoteViewsFactory
RemoteViewsService
là dịch vụ cho phép yêu cầu bộ chuyển đổi từ xa
Đối tượng RemoteViews
. RemoteViewsFactory
là một giao diện cho trình chuyển đổi
giữa một chế độ xem bộ sưu tập, chẳng hạn như ListView
, GridView
và
StackView
– và dữ liệu cơ bản cho chế độ xem đó. Từ StackWidget
mẫu,
đây là một ví dụ về mã nguyên mẫu để triển khai dịch vụ này và
giao diện:
Kotlin
class StackWidgetService : RemoteViewsService() { override fun onGetViewFactory(intent: Intent): RemoteViewsFactory { return StackRemoteViewsFactory(this.applicationContext, intent) } } class StackRemoteViewsFactory( private val context: Context, intent: Intent ) : RemoteViewsService.RemoteViewsFactory { // See the RemoteViewsFactory API reference for the full list of methods to // implement. }
Java
public class StackWidgetService extends RemoteViewsService { @Override public RemoteViewsFactory onGetViewFactory(Intent intent) { return new StackRemoteViewsFactory(this.getApplicationContext(), intent); } } class StackRemoteViewsFactory implements RemoteViewsService.RemoteViewsFactory { // See the RemoteViewsFactory API reference for the full list of methods to // implement. }
Ứng dụng mẫu
Các đoạn mã trong phần này cũng được lấy từ StackWidget
mẫu:
Mẫu này bao gồm một ngăn xếp gồm 10 khung hiển thị cho thấy các giá trị bằng 0 đến 9. Tiện ích mẫu có các hành vi chính sau:
Người dùng có thể hất theo chiều dọc từ khung hiển thị trên cùng trong tiện ích để hiển thị hoặc chế độ xem trước đó. Đây là hành vi
StackView
tích hợp sẵn.Khi không có bất kỳ sự tương tác nào của người dùng, tiện ích này sẽ tự động chuyển qua chế độ xem theo trình tự, như trình chiếu. Điều này là do chế độ cài đặt
android:autoAdvanceViewId="@id/stack_view"
trongres/xml/stackwidgetinfo.xml
. Cài đặt này áp dụng cho ID chế độ xem, trong trường hợp này là mã nhận dạng khung hiển thị của khung hiển thị ngăn xếp.Nếu người dùng chạm vào chế độ xem trên cùng, tiện ích sẽ hiển thị
Toast
thông báo "Chế độ xem đã chạm n," ở đâu n là chỉ mục (vị trí) của thành phần hiển thị được chạm. Để thảo luận thêm về cách để triển khai hành vi, hãy xem phần Thêm hành vi vào items.
Triển khai tiện ích với bộ sưu tập
Để triển khai tiện ích với các bộ sưu tập, hãy làm theo quy trình để triển khai bất kỳ
, sau đây là một vài bước bổ sung:
sửa đổi tệp kê khai, thêm chế độ xem bộ sưu tập vào bố cục tiện ích và sửa đổi
Lớp con AppWidgetProvider
.
Tệp kê khai cho các tiện ích có bộ sưu tập
Ngoài các yêu cầu được liệt kê trong Khai báo tiện ích trong
tệp kê khai, bạn cần tạo điều kiện cho các tiện ích có
để liên kết với RemoteViewsService
của bạn. Hãy thực hiện việc này bằng cách khai báo phương thức
trong tệp kê khai của bạn bằng quyền
BIND_REMOTEVIEWS
.
Điều này ngăn các ứng dụng khác tự do truy cập vào dữ liệu của tiện ích của bạn.
Ví dụ: khi tạo một tiện ích sử dụng RemoteViewsService
để điền sẵn một
chế độ xem bộ sưu tập, mục nhập tệp kê khai sẽ có dạng như sau:
<service android:name="MyWidgetService"
android:permission="android.permission.BIND_REMOTEVIEWS" />
Trong ví dụ này, android:name="MyWidgetService"
đề cập đến lớp con của
RemoteViewsService
Bố cục cho các tiện ích có bộ sưu tập
Yêu cầu chính đối với tệp XML bố cục tiện ích là tệp này bao gồm một trong
chế độ xem bộ sưu tập: ListView
, GridView
, StackView
hoặc
AdapterViewFlipper
. Đây là tệp widget_layout.xml
cho
StackWidget
mẫu:
<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="match_parent"
android:layout_height="match_parent">
<StackView
android:id="@+id/stack_view"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:gravity="center"
android:loopViews="true" />
<TextView
android:id="@+id/empty_view"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:gravity="center"
android:background="@drawable/widget_item_background"
android:textColor="#ffffff"
android:textStyle="bold"
android:text="@string/empty_view_text"
android:textSize="20sp" />
</FrameLayout>
Lưu ý rằng các khung hiển thị trống phải là các khung hiển thị đồng cấp của khung hiển thị bộ sưu tập mà khung hiển thị trống biểu thị trạng thái trống.
Ngoài tệp bố cục cho toàn bộ tiện ích, hãy tạo một bố cục khác
tệp xác định bố cục cho từng mục trong bộ sưu tập, ví dụ:
bố cục cho mỗi cuốn sách trong bộ sưu tập sách. Mẫu StackWidget
có
chỉ một tệp bố cục mục, widget_item.xml
, vì tất cả các mục sử dụng cùng một
của bạn.
Lớp AppWidgetProvider cho các tiện ích có bộ sưu tập
Giống như các tiện ích thông thường, phần lớn mã trong
Lớp con AppWidgetProvider
thường mất
onUpdate()
.
Sự khác biệt lớn trong việc triển khai của bạn đối với onUpdate()
khi tạo một
tiện ích có các bộ sưu tập là bạn phải gọi
setRemoteAdapter()
. Điều này cho chế độ xem bộ sưu tập biết nơi để lấy dữ liệu.
Sau đó, RemoteViewsService
có thể trả về phương thức triển khai của bạn
RemoteViewsFactory
và tiện ích này có thể phân phát dữ liệu thích hợp. Khi
gọi phương thức này, hãy chuyển một ý định trỏ đến phương thức triển khai của bạn
RemoteViewsService
và mã tiện ích chỉ định tiện ích cần cập nhật.
Ví dụ: dưới đây là cách mẫu StackWidget
triển khai onUpdate()
để đặt RemoteViewsService
làm bộ chuyển đổi từ xa cho
bộ sưu tập tiện ích:
Kotlin
override fun onUpdate( context: Context, appWidgetManager: AppWidgetManager, appWidgetIds: IntArray ) { // Update each of the widgets with the remote adapter. appWidgetIds.forEach { appWidgetId -> // Set up the intent that starts the StackViewService, which // provides the views for this collection. val intent = Intent(context, StackWidgetService::class.java).apply { // Add the widget ID to the intent extras. putExtra(AppWidgetManager.EXTRA_APPWIDGET_ID, appWidgetId) data = Uri.parse(toUri(Intent.URI_INTENT_SCHEME)) } // Instantiate the RemoteViews object for the widget layout. val views = RemoteViews(context.packageName, R.layout.widget_layout).apply { // Set up the RemoteViews object to use a RemoteViews adapter. // This adapter connects to a RemoteViewsService through the // specified intent. // This is how you populate the data. setRemoteAdapter(R.id.stack_view, intent) // The empty view is displayed when the collection has no items. // It must be in the same layout used to instantiate the // RemoteViews object. setEmptyView(R.id.stack_view, R.id.empty_view) } // Do additional processing specific to this widget. appWidgetManager.updateAppWidget(appWidgetId, views) } super.onUpdate(context, appWidgetManager, appWidgetIds) }
Java
public void onUpdate(Context context, AppWidgetManager appWidgetManager, int[] appWidgetIds) { // Update each of the widgets with the remote adapter. for (int i = 0; i < appWidgetIds.length; ++i) { // Set up the intent that starts the StackViewService, which // provides the views for this collection. Intent intent = new Intent(context, StackWidgetService.class); // Add the widget ID to the intent extras. intent.putExtra(AppWidgetManager.EXTRA_APPWIDGET_ID, appWidgetIds[i]); intent.setData(Uri.parse(intent.toUri(Intent.URI_INTENT_SCHEME))); // Instantiate the RemoteViews object for the widget layout. RemoteViews views = new RemoteViews(context.getPackageName(), R.layout.widget_layout); // Set up the RemoteViews object to use a RemoteViews adapter. // This adapter connects to a RemoteViewsService through the specified // intent. // This is how you populate the data. views.setRemoteAdapter(R.id.stack_view, intent); // The empty view is displayed when the collection has no items. // It must be in the same layout used to instantiate the RemoteViews // object. views.setEmptyView(R.id.stack_view, R.id.empty_view); // Do additional processing specific to this widget. appWidgetManager.updateAppWidget(appWidgetIds[i], views); } super.onUpdate(context, appWidgetManager, appWidgetIds); }
Duy trì dữ liệu
Như mô tả trên trang này, lớp con RemoteViewsService
cung cấp
RemoteViewsFactory
dùng để điền sẵn chế độ xem bộ sưu tập từ xa.
Cụ thể, hãy thực hiện các bước sau:
Lớp con
RemoteViewsService
.RemoteViewsService
là dịch vụ thông qua mà bộ chuyển đổi từ xa có thể yêu cầuRemoteViews
.Trong lớp con
RemoteViewsService
, hãy thêm một lớp triển khai phương thức Giao diệnRemoteViewsFactory
.RemoteViewsFactory
là một giao diện cho bộ chuyển đổi giữa chế độ xem bộ sưu tập từ xa—chẳng hạn nhưListView
,GridView
,StackView
– và dữ liệu cơ bản cho chế độ xem đó. Thông tin Quá trình triển khai chịu trách nhiệm tạo đối tượngRemoteViews
cho mỗi mục trong tập dữ liệu. Giao diện này là một trình bao bọc mỏng xung quanhAdapter
.
Bạn không được dựa vào một phiên bản dịch vụ duy nhất hoặc bất kỳ dữ liệu nào trong dịch vụ đó để
tồn tại lâu dài. Không lưu trữ dữ liệu trong RemoteViewsService
trừ phi dữ liệu đó ở dạng tĩnh. Nếu
bạn muốn dữ liệu tiện ích của mình tồn tại thì cách tốt nhất là sử dụng
ContentProvider
có dữ liệu
vẫn tồn tại ngoài vòng đời của quy trình. Ví dụ: tiện ích cửa hàng tạp hoá có thể
lưu trữ trạng thái của từng mặt hàng trong danh sách tạp hoá tại một vị trí cố định, chẳng hạn như
Cơ sở dữ liệu SQL.
Nội dung chính của việc triển khai RemoteViewsService
là
RemoteViewsFactory
, được mô tả trong phần sau.
Giao diện RemoteViewsFactory
Lớp tuỳ chỉnh triển khai giao diện RemoteViewsFactory
mang lại
tiện ích có dữ liệu về các mục trong bộ sưu tập của tiện ích đó. Để thực hiện việc này,
kết hợp tệp bố cục XML của mục tiện ích với một nguồn dữ liệu. Nguồn này của
dữ liệu có thể là bất kỳ nội dung nào từ một cơ sở dữ liệu cho đến một mảng đơn giản. Trong StackWidget
mẫu, nguồn dữ liệu là một mảng WidgetItems
. RemoteViewsFactory
có chức năng như một bộ chuyển đổi để gắn dữ liệu vào chế độ xem bộ sưu tập từ xa.
Hai phương pháp quan trọng nhất mà bạn cần triển khai cho
Lớp con RemoteViewsFactory
là
onCreate()
và
getViewAt()
.
Hệ thống gọi onCreate()
trong lần đầu tiên tạo nhà máy.
Đây là nơi bạn thiết lập mọi kết nối hoặc con trỏ đến nguồn dữ liệu. Cho
Ví dụ: mẫu StackWidget
sử dụng onCreate()
để khởi tạo một mảng
Đối tượng WidgetItem
. Khi tiện ích của bạn hoạt động, hệ thống sẽ truy cập vào
bằng cách sử dụng vị trí chỉ mục trong mảng và hiển thị văn bản mà chúng
chứa.
Dưới đây là một phần trích dẫn từ RemoteViewsFactory
của mẫu StackWidget
phương thức triển khai cho thấy các phần của phương thức onCreate()
:
Kotlin
private const val REMOTE_VIEW_COUNT: Int = 10 class StackRemoteViewsFactory( private val context: Context ) : RemoteViewsService.RemoteViewsFactory { private lateinit var widgetItems: List<WidgetItem> override fun onCreate() { // In onCreate(), set up any connections or cursors to your data // source. Heavy lifting, such as downloading or creating content, // must be deferred to onDataSetChanged() or getViewAt(). Taking // more than 20 seconds on this call results in an ANR. widgetItems = List(REMOTE_VIEW_COUNT) { index -> WidgetItem("$index!") } ... } ... }
Java
class StackRemoteViewsFactory implements RemoteViewsService.RemoteViewsFactory { private static final int REMOTE_VIEW_COUNT = 10; private List<WidgetItem> widgetItems = new ArrayList<WidgetItem>(); public void onCreate() { // In onCreate(), setup any connections or cursors to your data // source. Heavy lifting, such as downloading or creating content, // must be deferred to onDataSetChanged() or getViewAt(). Taking // more than 20 seconds on this call results in an ANR. for (int i = 0; i < REMOTE_VIEW_COUNT; i++) { widgetItems.add(new WidgetItem(i + "!")); } ... } ...
Phương thức RemoteViewsFactory
getViewAt()
trả về đối tượng RemoteViews
tương ứng với dữ liệu tại position
được chỉ định trong tập dữ liệu. Sau đây là
phần trích dẫn từ quá trình triển khai RemoteViewsFactory
của mẫu StackWidget
:
Kotlin
override fun getViewAt(position: Int): RemoteViews { // Construct a remote views item based on the widget item XML file // and set the text based on the position. return RemoteViews(context.packageName, R.layout.widget_item).apply { setTextViewText(R.id.widget_item, widgetItems[position].text) } }
Java
public RemoteViews getViewAt(int position) { // Construct a remote views item based on the widget item XML file // and set the text based on the position. RemoteViews views = new RemoteViews(context.getPackageName(), R.layout.widget_item); views.setTextViewText(R.id.widget_item, widgetItems.get(position).text); return views; }
Thêm hành vi cho từng mục
Các phần trước cho biết cách liên kết dữ liệu của bạn với bộ sưu tập tiện ích. Nhưng nếu bạn muốn thêm hành vi động vào các mục riêng lẻ trong chế độ xem bộ sưu tập không?
Như mô tả trong bài viết Xử lý sự kiện bằng onUpdate()
class, bạn thường sử dụng
setOnClickPendingIntent()
để thiết lập hành vi nhấp của một đối tượng, chẳng hạn như
làm cho một nút khởi chạy Activity
. Nhưng
không được phép sử dụng phương pháp này đối với chế độ xem con trong một mục bộ sưu tập riêng lẻ.
Ví dụ: bạn có thể sử dụng setOnClickPendingIntent()
để thiết lập nút chung
trong tiện ích Gmail chạy ứng dụng nhưng không chạy trên
các mục danh sách riêng lẻ.
Thay vào đó, để thêm hành vi nhấp vào từng mục trong một bộ sưu tập, hãy sử dụng
setOnClickFillInIntent()
. Để làm việc này, bạn cần thiết lập một mẫu ý định đang chờ xử lý cho
chế độ xem bộ sưu tập của bạn rồi thiết lập ý định điền cho từng mục trong
thu thập qua RemoteViewsFactory
của bạn.
Phần này sử dụng mẫu StackWidget
để mô tả cách thêm hành vi vào
các mục riêng lẻ. Trong mẫu StackWidget
, nếu người dùng chạm vào thành phần hiển thị trên cùng,
tiện ích sẽ hiển thị thông báo Toast
"Chế độ xem đã chạm n," trong đó n là
chỉ mục (vị trí) của chế độ xem được chạm. Dưới đây là cách hoạt động:
StackWidgetProvider
—mộtAppWidgetProvider
lớp con – tạo một ý định đang chờ xử lý thông qua một thao tác tuỳ chỉnh được gọi làTOAST_ACTION
.Khi người dùng chạm vào một khung hiển thị, ý định sẽ kích hoạt và truyền tin
TOAST_ACTION
.Quá trình truyền tin này bị chặn bởi lớp
StackWidgetProvider
onReceive()
và tiện ích này sẽ hiển thị thông báoToast
cho chế độ xem được chạm. Dữ liệu cho các mục của bộ sưu tập được cung cấp bởiRemoteViewsFactory
thông quaRemoteViewsService
.
Thiết lập mẫu ý định đang chờ xử lý
StackWidgetProvider
(một
lớp con AppWidgetProvider
)
thiết lập một ý định đang chờ xử lý. Bạn không thể thiết lập các mục riêng lẻ trong một bộ sưu tập
ý định đang chờ xử lý riêng. Thay vào đó, toàn bộ bộ sưu tập sẽ thiết lập một ý định đang chờ xử lý
và các mục riêng lẻ thiết lập ý định điền để tạo
hành vi theo từng mặt hàng.
Lớp này cũng nhận thông báo truyền tin được gửi khi người dùng chạm vào
chế độ xem. Trình xử lý sẽ xử lý sự kiện này trong phương thức onReceive()
. Nếu ý định là
là TOAST_ACTION
, tiện ích này sẽ hiển thị thông báo Toast
cho hành động hiện tại
chế độ xem.
Kotlin
const val TOAST_ACTION = "com.example.android.stackwidget.TOAST_ACTION" const val EXTRA_ITEM = "com.example.android.stackwidget.EXTRA_ITEM" class StackWidgetProvider : AppWidgetProvider() { ... // Called when the BroadcastReceiver receives an Intent broadcast. // Checks whether the intent's action is TOAST_ACTION. If it is, the // widget displays a Toast message for the current item. override fun onReceive(context: Context, intent: Intent) { val mgr: AppWidgetManager = AppWidgetManager.getInstance(context) if (intent.action == TOAST_ACTION) { val appWidgetId: Int = intent.getIntExtra( AppWidgetManager.EXTRA_APPWIDGET_ID, AppWidgetManager.INVALID_APPWIDGET_ID ) // EXTRA_ITEM represents a custom value provided by the Intent // passed to the setOnClickFillInIntent() method to indicate the // position of the clicked item. See StackRemoteViewsFactory in // Set the fill-in Intent for details. val viewIndex: Int = intent.getIntExtra(EXTRA_ITEM, 0) Toast.makeText(context, "Touched view $viewIndex", Toast.LENGTH_SHORT).show() } super.onReceive(context, intent) } override fun onUpdate( context: Context, appWidgetManager: AppWidgetManager, appWidgetIds: IntArray ) { // Update each of the widgets with the remote adapter. appWidgetIds.forEach { appWidgetId -> // Sets up the intent that points to the StackViewService that // provides the views for this collection. val intent = Intent(context, StackWidgetService::class.java).apply { putExtra(AppWidgetManager.EXTRA_APPWIDGET_ID, appWidgetId) // When intents are compared, the extras are ignored, so embed // the extra sinto the data so that the extras are not ignored. data = Uri.parse(toUri(Intent.URI_INTENT_SCHEME)) } val rv = RemoteViews(context.packageName, R.layout.widget_layout).apply { setRemoteAdapter(R.id.stack_view, intent) // The empty view is displayed when the collection has no items. // It must be a sibling of the collection view. setEmptyView(R.id.stack_view, R.id.empty_view) } // This section makes it possible for items to have individualized // behavior. It does this by setting up a pending intent template. // Individuals items of a collection can't set up their own pending // intents. Instead, the collection as a whole sets up a pending // intent template, and the individual items set a fillInIntent // to create unique behavior on an item-by-item basis. val toastPendingIntent: PendingIntent = Intent( context, StackWidgetProvider::class.java ).run { // Set the action for the intent. // When the user touches a particular view, it has the effect of // broadcasting TOAST_ACTION. action = TOAST_ACTION putExtra(AppWidgetManager.EXTRA_APPWIDGET_ID, appWidgetId) data = Uri.parse(toUri(Intent.URI_INTENT_SCHEME)) PendingIntent.getBroadcast(context, 0, this, PendingIntent.FLAG_UPDATE_CURRENT) } rv.setPendingIntentTemplate(R.id.stack_view, toastPendingIntent) appWidgetManager.updateAppWidget(appWidgetId, rv) } super.onUpdate(context, appWidgetManager, appWidgetIds) } }
Java
public class StackWidgetProvider extends AppWidgetProvider { public static final String TOAST_ACTION = "com.example.android.stackwidget.TOAST_ACTION"; public static final String EXTRA_ITEM = "com.example.android.stackwidget.EXTRA_ITEM"; ... // Called when the BroadcastReceiver receives an Intent broadcast. // Checks whether the intent's action is TOAST_ACTION. If it is, the // widget displays a Toast message for the current item. @Override public void onReceive(Context context, Intent intent) { AppWidgetManager mgr = AppWidgetManager.getInstance(context); if (intent.getAction().equals(TOAST_ACTION)) { int appWidgetId = intent.getIntExtra(AppWidgetManager.EXTRA_APPWIDGET_ID, AppWidgetManager.INVALID_APPWIDGET_ID); // EXTRA_ITEM represents a custom value provided by the Intent // passed to the setOnClickFillInIntent() method to indicate the // position of the clicked item. See StackRemoteViewsFactory in // Set the fill-in Intent for details. int viewIndex = intent.getIntExtra(EXTRA_ITEM, 0); Toast.makeText(context, "Touched view " + viewIndex, Toast.LENGTH_SHORT).show(); } super.onReceive(context, intent); } @Override public void onUpdate(Context context, AppWidgetManager appWidgetManager, int[] appWidgetIds) { // Update each of the widgets with the remote adapter. for (int i = 0; i < appWidgetIds.length; ++i) { // Sets up the intent that points to the StackViewService that // provides the views for this collection. Intent intent = new Intent(context, StackWidgetService.class); intent.putExtra(AppWidgetManager.EXTRA_APPWIDGET_ID, appWidgetIds[i]); // When intents are compared, the extras are ignored, so embed // the extras into the data so that the extras are not // ignored. intent.setData(Uri.parse(intent.toUri(Intent.URI_INTENT_SCHEME))); RemoteViews rv = new RemoteViews(context.getPackageName(), R.layout.widget_layout); rv.setRemoteAdapter(appWidgetIds[i], R.id.stack_view, intent); // The empty view is displayed when the collection has no items. It // must be a sibling of the collection view. rv.setEmptyView(R.id.stack_view, R.id.empty_view); // This section makes it possible for items to have individualized // behavior. It does this by setting up a pending intent template. // Individuals items of a collection can't set up their own pending // intents. Instead, the collection as a whole sets up a pending // intent template, and the individual items set a fillInIntent // to create unique behavior on an item-by-item basis. Intent toastIntent = new Intent(context, StackWidgetProvider.class); // Set the action for the intent. // When the user touches a particular view, it has the effect of // broadcasting TOAST_ACTION. toastIntent.setAction(StackWidgetProvider.TOAST_ACTION); toastIntent.putExtra(AppWidgetManager.EXTRA_APPWIDGET_ID, appWidgetIds[i]); intent.setData(Uri.parse(intent.toUri(Intent.URI_INTENT_SCHEME))); PendingIntent toastPendingIntent = PendingIntent.getBroadcast(context, 0, toastIntent, PendingIntent.FLAG_UPDATE_CURRENT); rv.setPendingIntentTemplate(R.id.stack_view, toastPendingIntent); appWidgetManager.updateAppWidget(appWidgetIds[i], rv); } super.onUpdate(context, appWidgetManager, appWidgetIds); } }
Đặt ý định điền
RemoteViewsFactory
của bạn phải đặt ý định điền cho từng mục trong
bộ sưu tập. Điều này giúp bạn có thể phân biệt từng hành động nhấp chuột
của một mặt hàng nhất định. Sau đó, ý định điền được kết hợp với
Mẫu PendingIntent
để xác định
ý định cuối cùng được thực thi khi mục được nhấn vào.
Kotlin
private const val REMOTE_VIEW_COUNT: Int = 10 class StackRemoteViewsFactory( private val context: Context, intent: Intent ) : RemoteViewsService.RemoteViewsFactory { private lateinit var widgetItems: List<WidgetItem> private val appWidgetId: Int = intent.getIntExtra( AppWidgetManager.EXTRA_APPWIDGET_ID, AppWidgetManager.INVALID_APPWIDGET_ID ) override fun onCreate() { // In onCreate(), set up any connections or cursors to your data source. // Heavy lifting, such as downloading or creating content, must be // deferred to onDataSetChanged() or getViewAt(). Taking more than 20 // seconds on this call results in an ANR. widgetItems = List(REMOTE_VIEW_COUNT) { index -> WidgetItem("$index!") } ... } ... override fun getViewAt(position: Int): RemoteViews { // Construct a remote views item based on the widget item XML file // and set the text based on the position. return RemoteViews(context.packageName, R.layout.widget_item).apply { setTextViewText(R.id.widget_item, widgetItems[position].text) // Set a fill-intent to fill in the pending intent template. // that is set on the collection view in StackWidgetProvider. val fillInIntent = Intent().apply { Bundle().also { extras -> extras.putInt(EXTRA_ITEM, position) putExtras(extras) } } // Make it possible to distinguish the individual on-click // action of a given item. setOnClickFillInIntent(R.id.widget_item, fillInIntent) ... } } ... }
Java
public class StackWidgetService extends RemoteViewsService { @Override public RemoteViewsFactory onGetViewFactory(Intent intent) { return new StackRemoteViewsFactory(this.getApplicationContext(), intent); } } class StackRemoteViewsFactory implements RemoteViewsService.RemoteViewsFactory { private static final int count = 10; private List<WidgetItem> widgetItems = new ArrayList<WidgetItem>(); private Context context; private int appWidgetId; public StackRemoteViewsFactory(Context context, Intent intent) { this.context = context; appWidgetId = intent.getIntExtra(AppWidgetManager.EXTRA_APPWIDGET_ID, AppWidgetManager.INVALID_APPWIDGET_ID); } // Initialize the data set. public void onCreate() { // In onCreate(), set up any connections or cursors to your data // source. Heavy lifting, such as downloading or creating // content, must be deferred to onDataSetChanged() or // getViewAt(). Taking more than 20 seconds on this call results // in an ANR. for (int i = 0; i < count; i++) { widgetItems.add(new WidgetItem(i + "!")); } ... } // Given the position (index) of a WidgetItem in the array, use the // item's text value in combination with the widget item XML file to // construct a RemoteViews object. public RemoteViews getViewAt(int position) { // Position always ranges from 0 to getCount() - 1. // Construct a RemoteViews item based on the widget item XML // file and set the text based on the position. RemoteViews rv = new RemoteViews(context.getPackageName(), R.layout.widget_item); rv.setTextViewText(R.id.widget_item, widgetItems.get(position).text); // Set a fill-intent to fill in the pending // intent template that is set on the collection view in // StackWidgetProvider. Bundle extras = new Bundle(); extras.putInt(StackWidgetProvider.EXTRA_ITEM, position); Intent fillInIntent = new Intent(); fillInIntent.putExtras(extras); // Make it possible to distinguish the individual on-click // action of a given item. rv.setOnClickFillInIntent(R.id.widget_item, fillInIntent); // Return the RemoteViews object. return rv; } ... }
Luôn làm mới dữ liệu về bộ sưu tập
Hình 2 minh hoạ quy trình cập nhật trong một tiện ích sử dụng các bộ sưu tập. Chiến dịch này cho thấy
cách mã tiện ích tương tác với RemoteViewsFactory
và cách bạn có thể
kích hoạt cập nhật:
Các tiện ích sử dụng bộ sưu tập có thể cung cấp cho người dùng nội dung cập nhật nhất. Cho
ví dụ: tiện ích Gmail cung cấp cho người dùng thông tin tổng quan nhanh về hộp thư đến của họ. Để thực hiện việc này
có thể, hãy kích hoạt RemoteViewsFactory
và khung hiển thị bộ sưu tập để tìm nạp và
hiển thị dữ liệu mới.
Để thực hiện việc này, hãy sử dụng
AppWidgetManager
để gọi
notifyAppWidgetViewDataChanged()
. Lệnh gọi này dẫn đến lệnh gọi lại đến đối tượng RemoteViewsFactory
của bạn
onDataSetChanged()
cho phép bạn tìm nạp mọi dữ liệu mới.
Bạn có thể thực hiện các thao tác chuyên sâu về xử lý một cách đồng bộ trong
Lệnh gọi lại onDataSetChanged()
. Bạn được đảm bảo rằng cuộc gọi này đã hoàn tất
trước khi siêu dữ liệu hoặc dữ liệu khung hiển thị được tìm nạp từ RemoteViewsFactory
. Bạn
cũng có thể thực hiện các thao tác xử lý chuyên sâu trong getViewAt()
. Nếu lệnh gọi này mất nhiều thời gian, khung hiển thị đang tải – được chỉ định bởi
RemoteViewsFactory
của đối tượng
getLoadingView()
phương thức—được hiển thị ở vị trí tương ứng của khung hiển thị bộ sưu tập
cho đến khi trả về.
Sử dụng RemoteCollectionItems để truyền trực tiếp tập hợp
Android 12 (API cấp 31) thêm setRemoteAdapter(int viewId,
RemoteViews.RemoteCollectionItems
items)
cho phép ứng dụng của bạn trực tiếp truyền tập hợp khi điền sẵn một
chế độ xem bộ sưu tập. Nếu đặt bộ chuyển đổi bằng phương thức này, bạn không cần
triển khai RemoteViewsFactory
và bạn không cần gọi
notifyAppWidgetViewDataChanged()
Ngoài việc giúp điền sẵn bộ chuyển đổi dễ dàng hơn, phương pháp này cũng
loại bỏ độ trễ để điền các mục mới khi người dùng cuộn xuống danh sách để
hiển thị một mục mới. Phương pháp thiết lập bộ chuyển đổi này sẽ được ưu tiên miễn là
tập hợp các mục bộ sưu tập tương đối nhỏ. Tuy nhiên, ví dụ:
không hoạt động tốt nếu bộ sưu tập của bạn chứa nhiều Bitmaps
đang được
được truyền đến setImageViewBitmap
.
Nếu bộ sưu tập không sử dụng tập hợp bố cục cố định, tức là nếu một số
các mục chỉ thỉnh thoảng xuất hiện. Hãy sử dụng setViewTypeCount
để chỉ định
số lượng tối đa bố cục duy nhất mà bộ sưu tập có thể chứa. Điều này cho phép
bộ chuyển đổi được sử dụng lại trên các bản cập nhật cho tiện ích ứng dụng.
Dưới đây là ví dụ về cách triển khai các tập hợp RemoteViews
được đơn giản hoá.
Kotlin
val itemLayouts = listOf( R.layout.item_type_1, R.layout.item_type_2, ... ) remoteView.setRemoteAdapter( R.id.list_view, RemoteViews.RemoteCollectionItems.Builder() .addItem(/* id= */ ID_1, RemoteViews(context.packageName, R.layout.item_type_1)) .addItem(/* id= */ ID_2, RemoteViews(context.packageName, R.layout.item_type_2)) ... .setViewTypeCount(itemLayouts.count()) .build() )
Java
List<Integer> itemLayouts = Arrays.asList( R.layout.item_type_1, R.layout.item_type_2, ... ); remoteView.setRemoteAdapter( R.id.list_view, new RemoteViews.RemoteCollectionItems.Builder() .addItem(/* id= */ ID_1, new RemoteViews(context.getPackageName(), R.layout.item_type_1)) .addItem(/* id= */ ID_2, new RemoteViews(context.getPackageName(), R.layout.item_type_2)) ... .setViewTypeCount(itemLayouts.size()) .build() );