屏幕闪烁

屏幕闪光灯（也称为前置闪光灯或自拍闪光灯）可在光线昏暗的环境下使用前置摄像头拍摄图片时，利用手机的屏幕亮度照亮拍摄对象。许多原生相机应用和社交媒体应用都支持此功能。由于大多数人在构图自拍时会将手机拿得足够近，因此这种方法非常有效。

不过，开发者很难正确实现此功能，并在各种设备上始终保持良好的拍摄质量。本指南介绍了如何使用低级 Android 相机框架 API Camera2 正确实现此功能。

常规工作流程

如需正确实现此功能，关键因素有两个：预曝光测光序列的使用（自动曝光预曝光）和操作的时间安排。一般工作流程如图 1 所示。

如需使用屏幕闪光灯功能拍摄图片，请按以下步骤操作。

1. 应用屏幕闪光灯所需的界面更改，以便提供足够的光线来使用设备屏幕拍照。对于常见用例，Google 建议进行以下界面更改，如我们的测试中所用：
   • 应用界面被白色叠加层覆盖。
   • 屏幕亮度已调至最大。
2. 将自动曝光 (AE) 模式设置为 CONTROL_AE_MODE_ON_EXTERNAL_FLASH（如果受支持）。
3. 使用 CONTROL_AE_PRECAPTURE_TRIGGER 触发预拍曝光序列。

4. 等待自动曝光 (AE) 和自动白平衡 (AWB) 收敛。

5. 融合完成后，系统会使用应用的常规照片拍摄流程。

6. 向框架发送拍摄请求。

7. 等待接收拍摄结果。

8. 如果设置了 CONTROL_AE_MODE_ON_EXTERNAL_FLASH，则重置 AE 模式。

9. 清除了屏幕闪烁的界面更改。

Camera2 示例代码

使用白色叠加层覆盖应用屏幕

在应用的布局 XML 文件中添加一个 View。该视图的高度足够高，可以在屏幕闪光捕获期间位于所有其他界面元素之上。默认情况下，它处于不可见状态，只有在应用屏幕闪烁界面更改后才会显示。

在以下代码示例中，白色 (#FFFFFF) 用作视图示例。应用可以根据用户的要求选择颜色，也可以向用户提供多种颜色。

<View
    android:id="@+id/white_color_overlay"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android:background="#FFFFFF"
    android:visibility="invisible"
    android:elevation="8dp" />

最大限度地调高屏幕亮度

在 Android 应用中更改屏幕亮度的方法有多种。一种直接方法是在 Activity 窗口参考文档中更改 screenBrightness WindowManager 参数。

private var previousBrightness: Float = -1.0f

private fun maximizeScreenBrightness() {
    activity?.window?.let { window ->
        window.attributes?.apply {
            previousBrightness = screenBrightness
            screenBrightness = 1f
            window.attributes = this
        }
    }
}

private fun restoreScreenBrightness() {
    activity?.window?.let { window ->
        window.attributes?.apply {
            screenBrightness = previousBrightness
            window.attributes = this
        }
    }
}

private float mPreviousBrightness = -1.0f;

private void maximizeScreenBrightness() {
    if (getActivity() == null || getActivity().getWindow() == null) {
        return;
    }

    Window window = getActivity().getWindow();
    WindowManager.LayoutParams attributes = window.getAttributes();

    mPreviousBrightness = attributes.screenBrightness;
    attributes.screenBrightness = 1f;
    window.setAttributes(attributes);
}

private void restoreScreenBrightness() {
    if (getActivity() == null || getActivity().getWindow() == null) {
        return;
    }

    Window window = getActivity().getWindow();
    WindowManager.LayoutParams attributes = window.getAttributes();

    attributes.screenBrightness = mPreviousBrightness;
    window.setAttributes(attributes);
}

将 AE 模式设置为 CONTROL_AE_MODE_ON_EXTERNAL_FLASH

CONTROL_AE_MODE_ON_EXTERNAL_FLASH 适用于 API 级别 28 或更高级别。不过，并非所有设备都支持此 AE 模式，因此请检查 AE 模式是否可用，并相应地设置值。如需检查可用性，请使用 CameraCharacteristics#CONTROL_AE_AVAILABLE_MODES。

private val characteristics: CameraCharacteristics by lazy {
    cameraManager.getCameraCharacteristics(cameraId)
}

@RequiresApi(Build.VERSION_CODES.P)
private fun isExternalFlashAeModeAvailable() =
    characteristics.get(CameraCharacteristics.CONTROL_AE_AVAILABLE_MODES)
        ?.contains(CaptureRequest.CONTROL_AE_MODE_ON_EXTERNAL_FLASH) ?: false

try {
    mCharacteristics = mCameraManager.getCameraCharacteristics(mCameraId);
} catch (CameraAccessException e) {
    e.printStackTrace();
}

@RequiresApi(Build.VERSION_CODES.P)
private boolean isExternalFlashAeModeAvailable() {
    int[] availableAeModes = mCharacteristics.get(CameraCharacteristics.CONTROL_AE_AVAILABLE_MODES);

    for (int aeMode : availableAeModes) {
        if (aeMode == CaptureRequest.CONTROL_AE_MODE_ON_EXTERNAL_FLASH) {
            return true;
        }
    }
    return false;
}

如果应用设置了重复拍摄请求（预览需要此设置），则需要将 AE 模式设置为重复请求。否则，在下一次重复拍摄时，它可能会被默认或其他用户设置的 AE 模式替换。如果发生这种情况，相机可能没有足够的时间来执行通常针对外部闪光灯 AE 模式执行的所有操作。

为帮助确保相机完全处理 AE 模式更新请求，请在重复拍摄回调中检查拍摄结果，并等待结果中的 AE 模式更新。

可以等待 AE 模式更新的拍照回调

以下代码段展示了如何实现此操作。

private val repeatingCaptureCallback = object : CameraCaptureSession.CaptureCallback() {
    private var targetAeMode: Int? = null
    private var aeModeUpdateDeferred: CompletableDeferred? = null

    suspend fun awaitAeModeUpdate(targetAeMode: Int) {
        this.targetAeMode = targetAeMode
        aeModeUpdateDeferred = CompletableDeferred()
        // Makes the current coroutine wait until aeModeUpdateDeferred is completed. It is
        // completed once targetAeMode is found in the following capture callbacks
        aeModeUpdateDeferred?.await()
    }

    private fun process(result: CaptureResult) {
        // Checks if AE mode is updated and completes any awaiting Deferred
        aeModeUpdateDeferred?.let {
            val aeMode = result[CaptureResult.CONTROL_AE_MODE]
            if (aeMode == targetAeMode) {
                it.complete(Unit)
            }
        }
    }

    override fun onCaptureCompleted(
        session: CameraCaptureSession,
        request: CaptureRequest,
        result: TotalCaptureResult
    ) {
        super.onCaptureCompleted(session, request, result)
        process(result)
    }
}

static class AwaitingCaptureCallback extends CameraCaptureSession.CaptureCallback {
    private int mTargetAeMode;
    private CountDownLatch mAeModeUpdateLatch = null;

    public void awaitAeModeUpdate(int targetAeMode) {
        mTargetAeMode = targetAeMode;
        mAeModeUpdateLatch = new CountDownLatch(1);
        // Makes the current thread wait until mAeModeUpdateLatch is released, it will be
        // released once targetAeMode is found in the capture callbacks below
        try {
            mAeModeUpdateLatch.await();
        } catch (InterruptedException e) {
            e.printStackTrace();
        }
    }

    private void process(CaptureResult result) {
        // Checks if AE mode is updated and decrements the count of any awaiting latch
        if (mAeModeUpdateLatch != null) {
            int aeMode = result.get(CaptureResult.CONTROL_AE_MODE);
            if (aeMode == mTargetAeMode) {
                mAeModeUpdateLatch.countDown();
            }
        }
    }

    @Override
    public void onCaptureCompleted(@NonNull CameraCaptureSession session,
            @NonNull CaptureRequest request,
            @NonNull TotalCaptureResult result) {
        super.onCaptureCompleted(session, request, result);
        process(result);
    }
}

private final AwaitingCaptureCallback mRepeatingCaptureCallback = new AwaitingCaptureCallback();

设置重复请求以启用或停用 AE 模式

设置好拍照回调后，以下代码示例展示了如何设置重复请求。

/** [HandlerThread] where all camera operations run */
private val cameraThread = HandlerThread("CameraThread").apply { start() }

/** [Handler] corresponding to [cameraThread] */
private val cameraHandler = Handler(cameraThread.looper)

private suspend fun enableExternalFlashAeMode() {
    if (Build.VERSION.SDK_INT >= 28 && isExternalFlashAeModeAvailable()) {
        session.setRepeatingRequest(
            camera.createCaptureRequest(CameraDevice.TEMPLATE_PREVIEW).apply {
                addTarget(previewSurface)
                set(
                    CaptureRequest.CONTROL_AE_MODE,
                    CaptureRequest.CONTROL_AE_MODE_ON_EXTERNAL_FLASH
                )
            }.build(), repeatingCaptureCallback, cameraHandler
        )

        // Wait for the request to be processed by camera
        repeatingCaptureCallback.awaitAeModeUpdate(CaptureRequest.CONTROL_AE_MODE_ON_EXTERNAL_FLASH)
    }
}

private fun disableExternalFlashAeMode() {
    if (Build.VERSION.SDK_INT >= 28 && isExternalFlashAeModeAvailable()) {
        session.setRepeatingRequest(
            camera.createCaptureRequest(CameraDevice.TEMPLATE_PREVIEW).apply {
                addTarget(previewSurface)
            }.build(), repeatingCaptureCallback, cameraHandler
        )
    }
}

private void setupCameraThread() {
    // HandlerThread where all camera operations run
    HandlerThread cameraThread = new HandlerThread("CameraThread");
    cameraThread.start();

    // Handler corresponding to cameraThread
    mCameraHandler = new Handler(cameraThread.getLooper());
}

private void enableExternalFlashAeMode() {
    if (Build.VERSION.SDK_INT >= 28 && isExternalFlashAeModeAvailable()) {
        try {
            CaptureRequest.Builder requestBuilder = mCamera.createCaptureRequest(CameraDevice.TEMPLATE_PREVIEW);
            requestBuilder.addTarget(mPreviewSurface);
            requestBuilder.set(CaptureRequest.CONTROL_AE_MODE, CaptureRequest.CONTROL_AE_MODE_ON_EXTERNAL_FLASH);
            mSession.setRepeatingRequest(requestBuilder.build(), mRepeatingCaptureCallback, mCameraHandler);
        } catch (CameraAccessException e) {
            e.printStackTrace();
        }

        // Wait for the request to be processed by camera
        mRepeatingCaptureCallback.awaitAeModeUpdate(CaptureRequest.CONTROL_AE_MODE_ON_EXTERNAL_FLASH);
    }
}

private void disableExternalFlashAeMode() {
    if (Build.VERSION.SDK_INT >= 28 && isExternalFlashAeModeAvailable()) {
        try {
            CaptureRequest.Builder requestBuilder = mCamera.createCaptureRequest(CameraDevice.TEMPLATE_PREVIEW);
            requestBuilder.addTarget(mPreviewSurface);
            mSession.setRepeatingRequest(requestBuilder.build(), mRepeatingCaptureCallback, mCameraHandler);
        } catch (CameraAccessException e) {
            e.printStackTrace();
        }
    }
}

触发预拍序列

如需触发预拍摄曝光序列，您可以提交一个 CaptureRequest，并将 CONTROL_AE_PRECAPTURE_TRIGGER_START 值设置为请求。您需要等待请求处理完毕，然后等待 AE 和 AWB 收敛。

虽然预拍摄会通过单个拍摄请求触发，但等待 AE 和 AWB 收敛确实需要更复杂的操作。您可以使用设置为重复请求的拍照回调来跟踪 AE 状态和 AWB 状态。

更新相同的重复回调可简化代码。应用通常需要预览，因此会在设置相机时设置重复请求。因此，您可以将重复捕获回调设置为该初始重复请求一次，然后重复使用该回调来检查结果和等待。

捕获回调代码更新以等待收敛

如需更新重复捕获回调，请使用以下代码段。

private val repeatingCaptureCallback = object : CameraCaptureSession.CaptureCallback() {
    private var targetAeMode: Int? = null
    private var aeModeUpdateDeferred: CompletableDeferred? = null

    private var convergenceDeferred: CompletableDeferred? = null

    suspend fun awaitAeModeUpdate(targetAeMode: Int) {
        this.targetAeMode = targetAeMode
        aeModeUpdateDeferred = CompletableDeferred()
        // Makes the current coroutine wait until aeModeUpdateDeferred is completed. It is
        // completed once targetAeMode is found in the following capture callbacks
        aeModeUpdateDeferred?.await()
    }

    suspend fun awaitAeAwbConvergence() {
        convergenceDeferred = CompletableDeferred()
        // Makes the current coroutine wait until convergenceDeferred is completed, it will be
        // completed once both AE & AWB are reported as converged in the capture callbacks below
        convergenceDeferred?.await()
    }

    private fun process(result: CaptureResult) {
        // Checks if AE mode is updated and completes any awaiting Deferred
        aeModeUpdateDeferred?.let {
            val aeMode = result[CaptureResult.CONTROL_AE_MODE]
            if (aeMode == targetAeMode) {
                it.complete(Unit)
            }
        }

        // Checks for convergence and completes any awaiting Deferred
        convergenceDeferred?.let {
            val aeState = result[CaptureResult.CONTROL_AE_STATE]
            val awbState = result[CaptureResult.CONTROL_AWB_STATE]

            val isAeReady = (
                    aeState == null // May be null in some devices (e.g. legacy camera HW level)
                            || aeState == CaptureResult.CONTROL_AE_STATE_CONVERGED
                            || aeState == CaptureResult.CONTROL_AE_STATE_FLASH_REQUIRED
                    )

            val isAwbReady = (
                    awbState == null // May be null in some devices (e.g. legacy camera HW level)
                            || awbState == CaptureResult.CONTROL_AWB_STATE_CONVERGED
                    )

            if (isAeReady && isAwbReady) {
                // if any non-null convergenceDeferred is set, complete it
                it.complete(Unit)
            }
        }
    }

    override fun onCaptureCompleted(
        session: CameraCaptureSession,
        request: CaptureRequest,
        result: TotalCaptureResult
    ) {
        super.onCaptureCompleted(session, request, result)
        process(result)
    }
}

static class AwaitingCaptureCallback extends CameraCaptureSession.CaptureCallback {
    private int mTargetAeMode;
    private CountDownLatch mAeModeUpdateLatch = null;

    private CountDownLatch mConvergenceLatch = null;

    public void awaitAeModeUpdate(int targetAeMode) {
        mTargetAeMode = targetAeMode;
        mAeModeUpdateLatch = new CountDownLatch(1);
        // Makes the current thread wait until mAeModeUpdateLatch is released, it will be
        // released once targetAeMode is found in the capture callbacks below
        try {
            mAeModeUpdateLatch.await();
        } catch (InterruptedException e) {
            e.printStackTrace();
        }
    }

    public void awaitAeAwbConvergence() {
        mConvergenceLatch = new CountDownLatch(1);
        // Makes the current coroutine wait until mConvergenceLatch is released, it will be
        // released once both AE & AWB are reported as converged in the capture callbacks below
        try {
            mConvergenceLatch.await();
        } catch (InterruptedException e) {
            e.printStackTrace();
        }
    }

    private void process(CaptureResult result) {
        // Checks if AE mode is updated and decrements the count of any awaiting latch
        if (mAeModeUpdateLatch != null) {
            int aeMode = result.get(CaptureResult.CONTROL_AE_MODE);
            if (aeMode == mTargetAeMode) {
                mAeModeUpdateLatch.countDown();
            }
        }

        // Checks for convergence and decrements the count of any awaiting latch
        if (mConvergenceLatch != null) {
            Integer aeState = result.get(CaptureResult.CONTROL_AE_STATE);
            Integer awbState = result.get(CaptureResult.CONTROL_AWB_STATE);

            boolean isAeReady = (
                    aeState == null // May be null in some devices (e.g. legacy camera HW level)
                            || aeState == CaptureResult.CONTROL_AE_STATE_CONVERGED
                            || aeState == CaptureResult.CONTROL_AE_STATE_FLASH_REQUIRED
            );

            boolean isAwbReady = (
                    awbState == null // May be null in some devices (e.g. legacy camera HW level)
                            || awbState == CaptureResult.CONTROL_AWB_STATE_CONVERGED
            );

            if (isAeReady && isAwbReady) {
                mConvergenceLatch.countDown();
                mConvergenceLatch = null;
            }
        }
    }

    @Override
    public void onCaptureCompleted(@NonNull CameraCaptureSession session,
            @NonNull CaptureRequest request,
            @NonNull TotalCaptureResult result) {
        super.onCaptureCompleted(session, request, result);
        process(result);
    }
}

在相机设置期间将回调设置为重复请求

通过以下代码示例，您可以在初始化期间将回调设置为重复请求。

// Open the selected camera
camera = openCamera(cameraManager, cameraId, cameraHandler)

// Creates list of Surfaces where the camera will output frames
val targets = listOf(previewSurface, imageReaderSurface)

// Start a capture session using our open camera and list of Surfaces where frames will go
session = createCameraCaptureSession(camera, targets, cameraHandler)

val captureRequest = camera.createCaptureRequest(
        CameraDevice.TEMPLATE_PREVIEW).apply { addTarget(previewSurface) }

// This will keep sending the capture request as frequently as possible until the
// session is torn down or session.stopRepeating() is called
session.setRepeatingRequest(captureRequest.build(), repeatingCaptureCallback, cameraHandler)

// Open the selected camera
mCamera = openCamera(mCameraManager, mCameraId, mCameraHandler);

// Creates list of Surfaces where the camera will output frames
List targets = new ArrayList<>(Arrays.asList(mPreviewSurface, mImageReaderSurface));

// Start a capture session using our open camera and list of Surfaces where frames will go
mSession = createCaptureSession(mCamera, targets, mCameraHandler);

try {
    CaptureRequest.Builder requestBuilder = mCamera.createCaptureRequest(CameraDevice.TEMPLATE_PREVIEW);
    requestBuilder.addTarget(mPreviewSurface);

    // This will keep sending the capture request as frequently as possible until the
    // session is torn down or session.stopRepeating() is called
    mSession.setRepeatingRequest(requestBuilder.build(), mRepeatingCaptureCallback, mCameraHandler);
} catch (CameraAccessException e) {
    e.printStackTrace();
}

预拍序列触发和等待

设置回调后，您可以使用以下代码示例进行预拍摄序列触发和等待。

private suspend fun runPrecaptureSequence() {
    // Creates a new capture request with CONTROL_AE_PRECAPTURE_TRIGGER_START
    val captureRequest = session.device.createCaptureRequest(
        CameraDevice.TEMPLATE_PREVIEW
    ).apply {
        addTarget(previewSurface)
        set(
            CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER,
            CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER_START
        )
    }

    val precaptureDeferred = CompletableDeferred()
    session.capture(captureRequest.build(), object: CameraCaptureSession.CaptureCallback() {
        override fun onCaptureCompleted(
            session: CameraCaptureSession,
            request: CaptureRequest,
            result: TotalCaptureResult
        ) {
            // Waiting for this callback ensures the precapture request has been processed
            precaptureDeferred.complete(Unit)
        }
    }, cameraHandler)

    precaptureDeferred.await()

    // Precapture trigger request has been processed, we can wait for AE & AWB convergence now
    repeatingCaptureCallback.awaitAeAwbConvergence()
}

private void runPrecaptureSequence() {
    // Creates a new capture request with CONTROL_AE_PRECAPTURE_TRIGGER_START
    try {
        CaptureRequest.Builder requestBuilder =
                mSession.getDevice().createCaptureRequest(CameraDevice.TEMPLATE_PREVIEW);
        requestBuilder.addTarget(mPreviewSurface);
        requestBuilder.set(CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER,
                CaptureRequest.CONTROL_AE_PRECAPTURE_TRIGGER_START);

        CountDownLatch precaptureLatch = new CountDownLatch(1);
        mSession.capture(requestBuilder.build(), new CameraCaptureSession.CaptureCallback() {
            @Override
            public void onCaptureCompleted(@NonNull CameraCaptureSession session,
                                           @NonNull CaptureRequest request,
                                           @NonNull TotalCaptureResult result) {
                Log.d(TAG, "CONTROL_AE_PRECAPTURE_TRIGGER_START processed");
                // Waiting for this callback ensures the precapture request has been processed
                precaptureLatch.countDown();
            }
        }, mCameraHandler);

        precaptureLatch.await();

        // Precapture trigger request has been processed, we can wait for AE & AWB convergence now
        mRepeatingCaptureCallback.awaitAeAwbConvergence();
    } catch (CameraAccessException | InterruptedException e) {
        e.printStackTrace();
    }
}

将所有内容拼接在一起

所有主要组件都已准备就绪，每当需要拍照时（例如，当用户点击拍照按钮拍照时），所有步骤都可以按照前面讨论和代码示例中所述的顺序执行。

// User clicks captureButton to take picture
captureButton.setOnClickListener { v ->
    // Apply the screen flash related UI changes
    whiteColorOverlayView.visibility = View.VISIBLE
    maximizeScreenBrightness()

    // Perform I/O heavy operations in a different scope
    lifecycleScope.launch(Dispatchers.IO) {
        // Enable external flash AE mode and wait for it to be processed
        enableExternalFlashAeMode()

        // Run precapture sequence and wait for it to complete
        runPrecaptureSequence()

        // Start taking picture and wait for it to complete
        takePhoto()

        disableExternalFlashAeMode()
        v.post {
            // Clear the screen flash related UI changes
            restoreScreenBrightness()
            whiteColorOverlayView.visibility = View.INVISIBLE
        }
    }
}

// User clicks captureButton to take picture
mCaptureButton.setOnClickListener(new View.OnClickListener() {
    @Override
    public void onClick(View v) {
        // Apply the screen flash related UI changes
        mWhiteColorOverlayView.setVisibility(View.VISIBLE);
        maximizeScreenBrightness();

        // Perform heavy operations in a different thread
        Executors.newSingleThreadExecutor().execute(() -> {
            // Enable external flash AE mode and wait for it to be processed
            enableExternalFlashAeMode();

            // Run precapture sequence and wait for it to complete
            runPrecaptureSequence();

            // Start taking picture and wait for it to complete
            takePhoto();

            disableExternalFlashAeMode();

            v.post(() -> {
                // Clear the screen flash related UI changes
                restoreScreenBrightness();
                mWhiteColorOverlayView.setVisibility(View.INVISIBLE);
            });
        });
    }
});

示例图片

您可以通过以下示例了解屏幕闪烁实现不当和正确实现时会出现的情况。

执行方式不当

如果屏幕闪光未正确实现，则在多次拍摄、不同设备和光照条件下，您会获得不一致的结果。拍摄的图片通常存在曝光不足或色彩偏差问题。对于某些设备，这类 bug 在特定光照条件下（例如弱光环境，而不是完全黑暗的环境）会更加明显。

下表显示了此类问题的示例。这些照片是在 CameraX 实验室基础架构中拍摄的，光源保持为暖白色。通过这种暖白光源，您可以了解蓝色色调是实际问题，而不是光源的副作用。

环境	曝光不足	过度曝光	色调
黑暗环境（除了手机外，没有光源）
弱光（额外提供约 3 勒克斯的光源）

正确使用

在相同的设备和条件下使用标准实现时，您可以在下表中查看结果。

环境	曝光不足（已修正）	曝光过度（已修正）	色调（已修正）
黑暗环境（除了手机外，没有光源）
弱光（额外提供约 3 勒克斯的光源）

如所观察，使用标准实现后，图片质量显著提升。