Input

Summary

Enumerations
`Anonymous Enum 32{ AKEY_STATE_UNKNOWN = -1, AKEY_STATE_UP = 0, AKEY_STATE_DOWN = 1, AKEY_STATE_VIRTUAL = 2 }`	enum Key states (may be returned by queries about the current state of a particular key code, scan code or switch).
Anonymous Enum 33{ AMETA_NONE = 0, AMETA_ALT_ON = 0x02, AMETA_ALT_LEFT_ON = 0x10, AMETA_ALT_RIGHT_ON = 0x20, AMETA_SHIFT_ON = 0x01, AMETA_SHIFT_LEFT_ON = 0x40, AMETA_SHIFT_RIGHT_ON = 0x80, AMETA_SYM_ON = 0x04, AMETA_FUNCTION_ON = 0x08, AMETA_CTRL_ON = 0x1000, AMETA_CTRL_LEFT_ON = 0x2000, AMETA_CTRL_RIGHT_ON = 0x4000, AMETA_META_ON = 0x10000, AMETA_META_LEFT_ON = 0x20000, AMETA_META_RIGHT_ON = 0x40000, AMETA_CAPS_LOCK_ON = 0x100000, AMETA_NUM_LOCK_ON = 0x200000, AMETA_SCROLL_LOCK_ON = 0x400000 }	enum Meta key / modifier state.
`Anonymous Enum 34{ AINPUT_EVENT_TYPE_KEY = 1, AINPUT_EVENT_TYPE_MOTION = 2, AINPUT_EVENT_TYPE_FOCUS = 3, AINPUT_EVENT_TYPE_CAPTURE = 4, AINPUT_EVENT_TYPE_DRAG = 5, AINPUT_EVENT_TYPE_TOUCH_MODE = 6 }`	enum Input event types.
`Anonymous Enum 35{ AKEY_EVENT_ACTION_DOWN = 0, AKEY_EVENT_ACTION_UP = 1, AKEY_EVENT_ACTION_MULTIPLE = 2 }`	enum Key event actions.
`Anonymous Enum 36{ AKEY_EVENT_FLAG_WOKE_HERE = 0x1, AKEY_EVENT_FLAG_SOFT_KEYBOARD = 0x2, AKEY_EVENT_FLAG_KEEP_TOUCH_MODE = 0x4, AKEY_EVENT_FLAG_FROM_SYSTEM = 0x8, AKEY_EVENT_FLAG_EDITOR_ACTION = 0x10, AKEY_EVENT_FLAG_CANCELED = 0x20, AKEY_EVENT_FLAG_VIRTUAL_HARD_KEY = 0x40, AKEY_EVENT_FLAG_LONG_PRESS = 0x80, AKEY_EVENT_FLAG_CANCELED_LONG_PRESS = 0x100, AKEY_EVENT_FLAG_TRACKING = 0x200, AKEY_EVENT_FLAG_FALLBACK = 0x400 }`	enum Key event flags.
Anonymous Enum 37{ AMOTION_EVENT_ACTION_MASK = 0xff, AMOTION_EVENT_ACTION_POINTER_INDEX_MASK = 0xff00, AMOTION_EVENT_ACTION_DOWN = 0, AMOTION_EVENT_ACTION_UP = 1, AMOTION_EVENT_ACTION_MOVE = 2, AMOTION_EVENT_ACTION_CANCEL = 3, AMOTION_EVENT_ACTION_OUTSIDE = 4, AMOTION_EVENT_ACTION_POINTER_DOWN = 5, AMOTION_EVENT_ACTION_POINTER_UP = 6, AMOTION_EVENT_ACTION_HOVER_MOVE = 7, AMOTION_EVENT_ACTION_SCROLL = 8, AMOTION_EVENT_ACTION_HOVER_ENTER = 9, AMOTION_EVENT_ACTION_HOVER_EXIT = 10, AMOTION_EVENT_ACTION_BUTTON_PRESS = 11, AMOTION_EVENT_ACTION_BUTTON_RELEASE = 12 }	enum Motion event actions.
`Anonymous Enum 38{ AMOTION_EVENT_FLAG_WINDOW_IS_OBSCURED = 0x1 }`	enum Motion event flags.
`Anonymous Enum 39{ AMOTION_EVENT_EDGE_FLAG_NONE = 0, AMOTION_EVENT_EDGE_FLAG_TOP = 0x01, AMOTION_EVENT_EDGE_FLAG_BOTTOM = 0x02, AMOTION_EVENT_EDGE_FLAG_LEFT = 0x04, AMOTION_EVENT_EDGE_FLAG_RIGHT = 0x08 }`	enum Motion event edge touch flags.
Anonymous Enum 40{ AMOTION_EVENT_AXIS_X = 0, AMOTION_EVENT_AXIS_Y = 1, AMOTION_EVENT_AXIS_PRESSURE = 2, AMOTION_EVENT_AXIS_SIZE = 3, AMOTION_EVENT_AXIS_TOUCH_MAJOR = 4, AMOTION_EVENT_AXIS_TOUCH_MINOR = 5, AMOTION_EVENT_AXIS_TOOL_MAJOR = 6, AMOTION_EVENT_AXIS_TOOL_MINOR = 7, AMOTION_EVENT_AXIS_ORIENTATION = 8, AMOTION_EVENT_AXIS_VSCROLL = 9, AMOTION_EVENT_AXIS_HSCROLL = 10, AMOTION_EVENT_AXIS_Z = 11, AMOTION_EVENT_AXIS_RX = 12, AMOTION_EVENT_AXIS_RY = 13, AMOTION_EVENT_AXIS_RZ = 14, AMOTION_EVENT_AXIS_HAT_X = 15, AMOTION_EVENT_AXIS_HAT_Y = 16, AMOTION_EVENT_AXIS_LTRIGGER = 17, AMOTION_EVENT_AXIS_RTRIGGER = 18, AMOTION_EVENT_AXIS_THROTTLE = 19, AMOTION_EVENT_AXIS_RUDDER = 20, AMOTION_EVENT_AXIS_WHEEL = 21, AMOTION_EVENT_AXIS_GAS = 22, AMOTION_EVENT_AXIS_BRAKE = 23, AMOTION_EVENT_AXIS_DISTANCE = 24, AMOTION_EVENT_AXIS_TILT = 25, AMOTION_EVENT_AXIS_SCROLL = 26, AMOTION_EVENT_AXIS_RELATIVE_X = 27, AMOTION_EVENT_AXIS_RELATIVE_Y = 28, AMOTION_EVENT_AXIS_GENERIC_1 = 32, AMOTION_EVENT_AXIS_GENERIC_2 = 33, AMOTION_EVENT_AXIS_GENERIC_3 = 34, AMOTION_EVENT_AXIS_GENERIC_4 = 35, AMOTION_EVENT_AXIS_GENERIC_5 = 36, AMOTION_EVENT_AXIS_GENERIC_6 = 37, AMOTION_EVENT_AXIS_GENERIC_7 = 38, AMOTION_EVENT_AXIS_GENERIC_8 = 39, AMOTION_EVENT_AXIS_GENERIC_9 = 40, AMOTION_EVENT_AXIS_GENERIC_10 = 41, AMOTION_EVENT_AXIS_GENERIC_11 = 42, AMOTION_EVENT_AXIS_GENERIC_12 = 43, AMOTION_EVENT_AXIS_GENERIC_13 = 44, AMOTION_EVENT_AXIS_GENERIC_14 = 45, AMOTION_EVENT_AXIS_GENERIC_15 = 46, AMOTION_EVENT_AXIS_GENERIC_16 = 47, AMOTION_EVENT_AXIS_GESTURE_X_OFFSET = 48, AMOTION_EVENT_AXIS_GESTURE_Y_OFFSET = 49, AMOTION_EVENT_AXIS_GESTURE_SCROLL_X_DISTANCE = 50, AMOTION_EVENT_AXIS_GESTURE_SCROLL_Y_DISTANCE = 51, AMOTION_EVENT_AXIS_GESTURE_PINCH_SCALE_FACTOR = 52, AMOTION_EVENT_AXIS_GESTURE_SWIPE_FINGER_COUNT = 53, AMOTION_EVENT_MAXIMUM_VALID_AXIS_VALUE = AMOTION_EVENT_AXIS_GESTURE_SWIPE_FINGER_COUNT }	enum Constants that identify each individual axis of a motion event.
`Anonymous Enum 41{ AMOTION_EVENT_BUTTON_PRIMARY = 1 << 0, AMOTION_EVENT_BUTTON_SECONDARY = 1 << 1, AMOTION_EVENT_BUTTON_TERTIARY = 1 << 2, AMOTION_EVENT_BUTTON_BACK = 1 << 3, AMOTION_EVENT_BUTTON_FORWARD = 1 << 4, AMOTION_EVENT_BUTTON_STYLUS_PRIMARY = 1 << 5, AMOTION_EVENT_BUTTON_STYLUS_SECONDARY = 1 << 6 }`	enum Constants that identify buttons that are associated with motion events.
`Anonymous Enum 42{ AMOTION_EVENT_TOOL_TYPE_UNKNOWN = 0, AMOTION_EVENT_TOOL_TYPE_FINGER = 1, AMOTION_EVENT_TOOL_TYPE_STYLUS = 2, AMOTION_EVENT_TOOL_TYPE_MOUSE = 3, AMOTION_EVENT_TOOL_TYPE_ERASER = 4, AMOTION_EVENT_TOOL_TYPE_PALM = 5 }`	enum Constants that identify tool types.
`Anonymous Enum 43{ AINPUT_SOURCE_CLASS_MASK = 0x000000ff, AINPUT_SOURCE_CLASS_NONE = 0x00000000, AINPUT_SOURCE_CLASS_BUTTON = 0x00000001, AINPUT_SOURCE_CLASS_POINTER = 0x00000002, AINPUT_SOURCE_CLASS_NAVIGATION = 0x00000004, AINPUT_SOURCE_CLASS_POSITION = 0x00000008, AINPUT_SOURCE_CLASS_JOYSTICK = 0x00000010 }`	enum Input source masks.
Anonymous Enum 44{ AINPUT_SOURCE_UNKNOWN = 0x00000000, AINPUT_SOURCE_KEYBOARD = 0x00000100 \| AINPUT_SOURCE_CLASS_BUTTON, AINPUT_SOURCE_DPAD = 0x00000200 \| AINPUT_SOURCE_CLASS_BUTTON, AINPUT_SOURCE_GAMEPAD = 0x00000400 \| AINPUT_SOURCE_CLASS_BUTTON, AINPUT_SOURCE_TOUCHSCREEN = 0x00001000 \| AINPUT_SOURCE_CLASS_POINTER, AINPUT_SOURCE_MOUSE = 0x00002000 \| AINPUT_SOURCE_CLASS_POINTER, AINPUT_SOURCE_STYLUS = 0x00004000 \| AINPUT_SOURCE_CLASS_POINTER, AINPUT_SOURCE_BLUETOOTH_STYLUS = 0x00008000 \| AINPUT_SOURCE_STYLUS, AINPUT_SOURCE_TRACKBALL = 0x00010000 \| AINPUT_SOURCE_CLASS_NAVIGATION, AINPUT_SOURCE_MOUSE_RELATIVE = 0x00020000 \| AINPUT_SOURCE_CLASS_NAVIGATION, AINPUT_SOURCE_TOUCHPAD = 0x00100000 \| AINPUT_SOURCE_CLASS_POSITION, AINPUT_SOURCE_TOUCH_NAVIGATION = 0x00200000 \| AINPUT_SOURCE_CLASS_NONE, AINPUT_SOURCE_JOYSTICK = 0x01000000 \| AINPUT_SOURCE_CLASS_JOYSTICK, AINPUT_SOURCE_HDMI = 0x02000000 \| AINPUT_SOURCE_CLASS_BUTTON, AINPUT_SOURCE_SENSOR = 0x04000000 \| AINPUT_SOURCE_CLASS_NONE, AINPUT_SOURCE_ROTARY_ENCODER = 0x00400000 \| AINPUT_SOURCE_CLASS_NONE, AINPUT_SOURCE_ANY = 0xffffff00 }	enum Input sources.
`Anonymous Enum 45{ AINPUT_KEYBOARD_TYPE_NONE = 0, AINPUT_KEYBOARD_TYPE_NON_ALPHABETIC = 1, AINPUT_KEYBOARD_TYPE_ALPHABETIC = 2 }`	enum Keyboard types.
Anonymous Enum 46{ AINPUT_MOTION_RANGE_X = AMOTION_EVENT_AXIS_X, AINPUT_MOTION_RANGE_Y = AMOTION_EVENT_AXIS_Y, AINPUT_MOTION_RANGE_PRESSURE = AMOTION_EVENT_AXIS_PRESSURE, AINPUT_MOTION_RANGE_SIZE = AMOTION_EVENT_AXIS_SIZE, AINPUT_MOTION_RANGE_TOUCH_MAJOR = AMOTION_EVENT_AXIS_TOUCH_MAJOR, AINPUT_MOTION_RANGE_TOUCH_MINOR = AMOTION_EVENT_AXIS_TOUCH_MINOR, AINPUT_MOTION_RANGE_TOOL_MAJOR = AMOTION_EVENT_AXIS_TOOL_MAJOR, AINPUT_MOTION_RANGE_TOOL_MINOR = AMOTION_EVENT_AXIS_TOOL_MINOR, AINPUT_MOTION_RANGE_ORIENTATION = AMOTION_EVENT_AXIS_ORIENTATION }	enum Constants used to retrieve information about the range of motion for a particular coordinate of a motion event.
Anonymous Enum 47{ AKEYCODE_UNKNOWN = 0, AKEYCODE_SOFT_LEFT = 1, AKEYCODE_SOFT_RIGHT = 2, AKEYCODE_HOME = 3, AKEYCODE_BACK = 4, AKEYCODE_CALL = 5, AKEYCODE_ENDCALL = 6, AKEYCODE_0 = 7, AKEYCODE_1 = 8, AKEYCODE_2 = 9, AKEYCODE_3 = 10, AKEYCODE_4 = 11, AKEYCODE_5 = 12, AKEYCODE_6 = 13, AKEYCODE_7 = 14, AKEYCODE_8 = 15, AKEYCODE_9 = 16, AKEYCODE_STAR = 17, AKEYCODE_POUND = 18, AKEYCODE_DPAD_UP = 19, AKEYCODE_DPAD_DOWN = 20, AKEYCODE_DPAD_LEFT = 21, AKEYCODE_DPAD_RIGHT = 22, AKEYCODE_DPAD_CENTER = 23, AKEYCODE_VOLUME_UP = 24, AKEYCODE_VOLUME_DOWN = 25, AKEYCODE_POWER = 26, AKEYCODE_CAMERA = 27, AKEYCODE_CLEAR = 28, AKEYCODE_A = 29, AKEYCODE_B = 30, AKEYCODE_C = 31, AKEYCODE_D = 32, AKEYCODE_E = 33, AKEYCODE_F = 34, AKEYCODE_G = 35, AKEYCODE_H = 36, AKEYCODE_I = 37, AKEYCODE_J = 38, AKEYCODE_K = 39, AKEYCODE_L = 40, AKEYCODE_M = 41, AKEYCODE_N = 42, AKEYCODE_O = 43, AKEYCODE_P = 44, AKEYCODE_Q = 45, AKEYCODE_R = 46, AKEYCODE_S = 47, AKEYCODE_T = 48, AKEYCODE_U = 49, AKEYCODE_V = 50, AKEYCODE_W = 51, AKEYCODE_X = 52, AKEYCODE_Y = 53, AKEYCODE_Z = 54, AKEYCODE_COMMA = 55, AKEYCODE_PERIOD = 56, AKEYCODE_ALT_LEFT = 57, AKEYCODE_ALT_RIGHT = 58, AKEYCODE_SHIFT_LEFT = 59, AKEYCODE_SHIFT_RIGHT = 60, AKEYCODE_TAB = 61, AKEYCODE_SPACE = 62, AKEYCODE_SYM = 63, AKEYCODE_EXPLORER = 64, AKEYCODE_ENVELOPE = 65, AKEYCODE_ENTER = 66, AKEYCODE_DEL = 67, AKEYCODE_GRAVE = 68, AKEYCODE_MINUS = 69, AKEYCODE_EQUALS = 70, AKEYCODE_LEFT_BRACKET = 71, AKEYCODE_RIGHT_BRACKET = 72, AKEYCODE_BACKSLASH = 73, AKEYCODE_SEMICOLON = 74, AKEYCODE_APOSTROPHE = 75, AKEYCODE_SLASH = 76, AKEYCODE_AT = 77, AKEYCODE_NUM = 78, AKEYCODE_HEADSETHOOK = 79, AKEYCODE_FOCUS = 80, AKEYCODE_PLUS = 81, AKEYCODE_MENU = 82, AKEYCODE_NOTIFICATION = 83, AKEYCODE_SEARCH = 84, AKEYCODE_MEDIA_PLAY_PAUSE = 85, AKEYCODE_MEDIA_STOP = 86, AKEYCODE_MEDIA_NEXT = 87, AKEYCODE_MEDIA_PREVIOUS = 88, AKEYCODE_MEDIA_REWIND = 89, AKEYCODE_MEDIA_FAST_FORWARD = 90, AKEYCODE_MUTE = 91, AKEYCODE_PAGE_UP = 92, AKEYCODE_PAGE_DOWN = 93, AKEYCODE_PICTSYMBOLS = 94, AKEYCODE_SWITCH_CHARSET = 95, AKEYCODE_BUTTON_A = 96, AKEYCODE_BUTTON_B = 97, AKEYCODE_BUTTON_C = 98, AKEYCODE_BUTTON_X = 99, AKEYCODE_BUTTON_Y = 100, AKEYCODE_BUTTON_Z = 101, AKEYCODE_BUTTON_L1 = 102, AKEYCODE_BUTTON_R1 = 103, AKEYCODE_BUTTON_L2 = 104, AKEYCODE_BUTTON_R2 = 105, AKEYCODE_BUTTON_THUMBL = 106, AKEYCODE_BUTTON_THUMBR = 107, AKEYCODE_BUTTON_START = 108, AKEYCODE_BUTTON_SELECT = 109, AKEYCODE_BUTTON_MODE = 110, AKEYCODE_ESCAPE = 111, AKEYCODE_FORWARD_DEL = 112, AKEYCODE_CTRL_LEFT = 113, AKEYCODE_CTRL_RIGHT = 114, AKEYCODE_CAPS_LOCK = 115, AKEYCODE_SCROLL_LOCK = 116, AKEYCODE_META_LEFT = 117, AKEYCODE_META_RIGHT = 118, AKEYCODE_FUNCTION = 119, AKEYCODE_SYSRQ = 120, AKEYCODE_BREAK = 121, AKEYCODE_MOVE_HOME = 122, AKEYCODE_MOVE_END = 123, AKEYCODE_INSERT = 124, AKEYCODE_FORWARD = 125, AKEYCODE_MEDIA_PLAY = 126, AKEYCODE_MEDIA_PAUSE = 127, AKEYCODE_MEDIA_CLOSE = 128, AKEYCODE_MEDIA_EJECT = 129, AKEYCODE_MEDIA_RECORD = 130, AKEYCODE_F1 = 131, AKEYCODE_F2 = 132, AKEYCODE_F3 = 133, AKEYCODE_F4 = 134, AKEYCODE_F5 = 135, AKEYCODE_F6 = 136, AKEYCODE_F7 = 137, AKEYCODE_F8 = 138, AKEYCODE_F9 = 139, AKEYCODE_F10 = 140, AKEYCODE_F11 = 141, AKEYCODE_F12 = 142, AKEYCODE_NUM_LOCK = 143, AKEYCODE_NUMPAD_0 = 144, AKEYCODE_NUMPAD_1 = 145, AKEYCODE_NUMPAD_2 = 146, AKEYCODE_NUMPAD_3 = 147, AKEYCODE_NUMPAD_4 = 148, AKEYCODE_NUMPAD_5 = 149, AKEYCODE_NUMPAD_6 = 150, AKEYCODE_NUMPAD_7 = 151, AKEYCODE_NUMPAD_8 = 152, AKEYCODE_NUMPAD_9 = 153, AKEYCODE_NUMPAD_DIVIDE = 154, AKEYCODE_NUMPAD_MULTIPLY = 155, AKEYCODE_NUMPAD_SUBTRACT = 156, AKEYCODE_NUMPAD_ADD = 157, AKEYCODE_NUMPAD_DOT = 158, AKEYCODE_NUMPAD_COMMA = 159, AKEYCODE_NUMPAD_ENTER = 160, AKEYCODE_NUMPAD_EQUALS = 161, AKEYCODE_NUMPAD_LEFT_PAREN = 162, AKEYCODE_NUMPAD_RIGHT_PAREN = 163, AKEYCODE_VOLUME_MUTE = 164, AKEYCODE_INFO = 165, AKEYCODE_CHANNEL_UP = 166, AKEYCODE_CHANNEL_DOWN = 167, AKEYCODE_ZOOM_IN = 168, AKEYCODE_ZOOM_OUT = 169, AKEYCODE_TV = 170, AKEYCODE_WINDOW = 171, AKEYCODE_GUIDE = 172, AKEYCODE_DVR = 173, AKEYCODE_BOOKMARK = 174, AKEYCODE_CAPTIONS = 175, AKEYCODE_SETTINGS = 176, AKEYCODE_TV_POWER = 177, AKEYCODE_TV_INPUT = 178, AKEYCODE_STB_POWER = 179, AKEYCODE_STB_INPUT = 180, AKEYCODE_AVR_POWER = 181, AKEYCODE_AVR_INPUT = 182, AKEYCODE_PROG_RED = 183, AKEYCODE_PROG_GREEN = 184, AKEYCODE_PROG_YELLOW = 185, AKEYCODE_PROG_BLUE = 186, AKEYCODE_APP_SWITCH = 187, AKEYCODE_BUTTON_1 = 188, AKEYCODE_BUTTON_2 = 189, AKEYCODE_BUTTON_3 = 190, AKEYCODE_BUTTON_4 = 191, AKEYCODE_BUTTON_5 = 192, AKEYCODE_BUTTON_6 = 193, AKEYCODE_BUTTON_7 = 194, AKEYCODE_BUTTON_8 = 195, AKEYCODE_BUTTON_9 = 196, AKEYCODE_BUTTON_10 = 197, AKEYCODE_BUTTON_11 = 198, AKEYCODE_BUTTON_12 = 199, AKEYCODE_BUTTON_13 = 200, AKEYCODE_BUTTON_14 = 201, AKEYCODE_BUTTON_15 = 202, AKEYCODE_BUTTON_16 = 203, AKEYCODE_LANGUAGE_SWITCH = 204, AKEYCODE_MANNER_MODE = 205, AKEYCODE_3D_MODE = 206, AKEYCODE_CONTACTS = 207, AKEYCODE_CALENDAR = 208, AKEYCODE_MUSIC = 209, AKEYCODE_CALCULATOR = 210, AKEYCODE_ZENKAKU_HANKAKU = 211, AKEYCODE_EISU = 212, AKEYCODE_MUHENKAN = 213, AKEYCODE_HENKAN = 214, AKEYCODE_KATAKANA_HIRAGANA = 215, AKEYCODE_YEN = 216, AKEYCODE_RO = 217, AKEYCODE_KANA = 218, AKEYCODE_ASSIST = 219, AKEYCODE_BRIGHTNESS_DOWN = 220, AKEYCODE_BRIGHTNESS_UP = 221, AKEYCODE_MEDIA_AUDIO_TRACK = 222, AKEYCODE_SLEEP = 223, AKEYCODE_WAKEUP = 224, AKEYCODE_PAIRING = 225, AKEYCODE_MEDIA_TOP_MENU = 226, AKEYCODE_11 = 227, AKEYCODE_12 = 228, AKEYCODE_LAST_CHANNEL = 229, AKEYCODE_TV_DATA_SERVICE = 230, AKEYCODE_VOICE_ASSIST = 231, AKEYCODE_TV_RADIO_SERVICE = 232, AKEYCODE_TV_TELETEXT = 233, AKEYCODE_TV_NUMBER_ENTRY = 234, AKEYCODE_TV_TERRESTRIAL_ANALOG = 235, AKEYCODE_TV_TERRESTRIAL_DIGITAL = 236, AKEYCODE_TV_SATELLITE = 237, AKEYCODE_TV_SATELLITE_BS = 238, AKEYCODE_TV_SATELLITE_CS = 239, AKEYCODE_TV_SATELLITE_SERVICE = 240, AKEYCODE_TV_NETWORK = 241, AKEYCODE_TV_ANTENNA_CABLE = 242, AKEYCODE_TV_INPUT_HDMI_1 = 243, AKEYCODE_TV_INPUT_HDMI_2 = 244, AKEYCODE_TV_INPUT_HDMI_3 = 245, AKEYCODE_TV_INPUT_HDMI_4 = 246, AKEYCODE_TV_INPUT_COMPOSITE_1 = 247, AKEYCODE_TV_INPUT_COMPOSITE_2 = 248, AKEYCODE_TV_INPUT_COMPONENT_1 = 249, AKEYCODE_TV_INPUT_COMPONENT_2 = 250, AKEYCODE_TV_INPUT_VGA_1 = 251, AKEYCODE_TV_AUDIO_DESCRIPTION = 252, AKEYCODE_TV_AUDIO_DESCRIPTION_MIX_UP = 253, AKEYCODE_TV_AUDIO_DESCRIPTION_MIX_DOWN = 254, AKEYCODE_TV_ZOOM_MODE = 255, AKEYCODE_TV_CONTENTS_MENU = 256, AKEYCODE_TV_MEDIA_CONTEXT_MENU = 257, AKEYCODE_TV_TIMER_PROGRAMMING = 258, AKEYCODE_HELP = 259, AKEYCODE_NAVIGATE_PREVIOUS = 260, AKEYCODE_NAVIGATE_NEXT = 261, AKEYCODE_NAVIGATE_IN = 262, AKEYCODE_NAVIGATE_OUT = 263, AKEYCODE_STEM_PRIMARY = 264, AKEYCODE_STEM_1 = 265, AKEYCODE_STEM_2 = 266, AKEYCODE_STEM_3 = 267, AKEYCODE_DPAD_UP_LEFT = 268, AKEYCODE_DPAD_DOWN_LEFT = 269, AKEYCODE_DPAD_UP_RIGHT = 270, AKEYCODE_DPAD_DOWN_RIGHT = 271, AKEYCODE_MEDIA_SKIP_FORWARD = 272, AKEYCODE_MEDIA_SKIP_BACKWARD = 273, AKEYCODE_MEDIA_STEP_FORWARD = 274, AKEYCODE_MEDIA_STEP_BACKWARD = 275, AKEYCODE_SOFT_SLEEP = 276, AKEYCODE_CUT = 277, AKEYCODE_COPY = 278, AKEYCODE_PASTE = 279, AKEYCODE_SYSTEM_NAVIGATION_UP = 280, AKEYCODE_SYSTEM_NAVIGATION_DOWN = 281, AKEYCODE_SYSTEM_NAVIGATION_LEFT = 282, AKEYCODE_SYSTEM_NAVIGATION_RIGHT = 283, AKEYCODE_ALL_APPS = 284, AKEYCODE_REFRESH = 285, AKEYCODE_THUMBS_UP = 286, AKEYCODE_THUMBS_DOWN = 287, AKEYCODE_PROFILE_SWITCH = 288, AKEYCODE_VIDEO_APP_1 = 289, AKEYCODE_VIDEO_APP_2 = 290, AKEYCODE_VIDEO_APP_3 = 291, AKEYCODE_VIDEO_APP_4 = 292, AKEYCODE_VIDEO_APP_5 = 293, AKEYCODE_VIDEO_APP_6 = 294, AKEYCODE_VIDEO_APP_7 = 295, AKEYCODE_VIDEO_APP_8 = 296, AKEYCODE_FEATURED_APP_1 = 297, AKEYCODE_FEATURED_APP_2 = 298, AKEYCODE_FEATURED_APP_3 = 299, AKEYCODE_FEATURED_APP_4 = 300, AKEYCODE_DEMO_APP_1 = 301, AKEYCODE_DEMO_APP_2 = 302, AKEYCODE_DEMO_APP_3 = 303, AKEYCODE_DEMO_APP_4 = 304, AKEYCODE_KEYBOARD_BACKLIGHT_DOWN = 305, AKEYCODE_KEYBOARD_BACKLIGHT_UP = 306, AKEYCODE_KEYBOARD_BACKLIGHT_TOGGLE = 307, AKEYCODE_STYLUS_BUTTON_PRIMARY = 308, AKEYCODE_STYLUS_BUTTON_SECONDARY = 309, AKEYCODE_STYLUS_BUTTON_TERTIARY = 310, AKEYCODE_STYLUS_BUTTON_TAIL = 311, AKEYCODE_RECENT_APPS = 312, AKEYCODE_MACRO_1 = 313, AKEYCODE_MACRO_2 = 314, AKEYCODE_MACRO_3 = 315, AKEYCODE_MACRO_4 = 316, AKEYCODE_EMOJI_PICKER = 317, AKEYCODE_SCREENSHOT = 318 }	enum Key codes.
`AMotionClassification{ AMOTION_EVENT_CLASSIFICATION_NONE = 0, AMOTION_EVENT_CLASSIFICATION_AMBIGUOUS_GESTURE = 1, AMOTION_EVENT_CLASSIFICATION_DEEP_PRESS = 2, AMOTION_EVENT_CLASSIFICATION_TWO_FINGER_SWIPE = 3, AMOTION_EVENT_CLASSIFICATION_MULTI_FINGER_SWIPE = 4, AMOTION_EVENT_CLASSIFICATION_PINCH = 5 }`	enum Constants that identify different gesture classification types.

Typedefs
`AInputEvent`	typedef `struct AInputEvent` Input events.
`AInputQueue`	typedef `struct AInputQueue` Input queue.

Functions
`AInputEvent_getDeviceId(const AInputEvent *event)`	`int32_t` Get the id for the device that an input event came from.
`AInputEvent_getSource(const AInputEvent *event)`	`int32_t` Get the input event source.
`AInputEvent_getType(const AInputEvent *event)`	`int32_t` Input event accessors.
`AInputEvent_release(const AInputEvent *event)`	`void` Releases interface objects created by AKeyEvent_fromJava() and AMotionEvent_fromJava().
`AInputEvent_toJava(JNIEnv env, const AInputEvent aInputEvent)`	`jobject` Creates a java android.view.InputEvent object that is a copy of the specified native AInputEvent.
`AInputQueue_attachLooper(AInputQueue queue, ALooper looper, int ident, ALooper_callbackFunc callback, void *data)`	`void` Add this input queue to a looper for processing.
`AInputQueue_detachLooper(AInputQueue *queue)`	`void` Remove the input queue from the looper it is currently attached to.
`AInputQueue_finishEvent(AInputQueue queue, AInputEvent event, int handled)`	`void` Report that dispatching has finished with the given event.
`AInputQueue_fromJava(JNIEnv *env, jobject inputQueue)`	`AInputQueue ` Returns the AInputQueue object associated with the supplied Java InputQueue object.
`AInputQueue_getEvent(AInputQueue queue, AInputEvent *outEvent)`	`int32_t` Returns the next available event from the queue.
`AInputQueue_hasEvents(AInputQueue *queue)`	`int32_t` Returns true if there are one or more events available in the input queue.
`AInputQueue_preDispatchEvent(AInputQueue queue, AInputEvent event)`	`int32_t` Sends the key for standard pre-dispatching that is, possibly deliver it to the current IME to be consumed before the app.
`AKeyEvent_fromJava(JNIEnv *env, jobject keyEvent)`	`const AInputEvent ` Creates a native AInputEvent object that is a copy of the specified Java android.view.KeyEvent.
`AKeyEvent_getAction(const AInputEvent *key_event)`	`int32_t` Get the key event action.
`AKeyEvent_getDownTime(const AInputEvent *key_event)`	`int64_t` Get the time of the most recent key down event, in the java.lang.System.nanoTime() time base.
`AKeyEvent_getEventTime(const AInputEvent *key_event)`	`int64_t` Get the time this event occurred, in the java.lang.System.nanoTime() time base.
`AKeyEvent_getFlags(const AInputEvent *key_event)`	`int32_t` Get the key event flags.
`AKeyEvent_getKeyCode(const AInputEvent *key_event)`	`int32_t` Get the key code of the key event.
`AKeyEvent_getMetaState(const AInputEvent *key_event)`	`int32_t` Get the meta key state.
`AKeyEvent_getRepeatCount(const AInputEvent *key_event)`	`int32_t` Get the repeat count of the event.
`AKeyEvent_getScanCode(const AInputEvent *key_event)`	`int32_t` Get the hardware key id of this key event.
`AMotionEvent_fromJava(JNIEnv *env, jobject motionEvent)`	`const AInputEvent ` Creates a native AInputEvent object that is a copy of the specified Java android.view.MotionEvent.
`AMotionEvent_getAction(const AInputEvent *motion_event)`	`int32_t` Get the combined motion event action code and pointer index.
`AMotionEvent_getActionButton(const AInputEvent *motion_event)`	`int32_t` Get the action button for the motion event.
`AMotionEvent_getAxisValue(const AInputEvent *motion_event, int32_t axis, size_t pointer_index)`	`float` Get the value of the request axis for the given pointer index.
`AMotionEvent_getButtonState(const AInputEvent *motion_event)`	`int32_t` Get the button state of all buttons that are pressed.
`AMotionEvent_getClassification(const AInputEvent *motion_event)`	`int32_t` Returns the classification for the current gesture.
`AMotionEvent_getDownTime(const AInputEvent *motion_event)`	`int64_t` Get the time when the user originally pressed down to start a stream of position events, in the java.lang.System.nanoTime() time base.
`AMotionEvent_getEdgeFlags(const AInputEvent *motion_event)`	`int32_t` Get a bitfield indicating which edges, if any, were touched by this motion event.
`AMotionEvent_getEventTime(const AInputEvent *motion_event)`	`int64_t` Get the time when this specific event was generated, in the java.lang.System.nanoTime() time base.
`AMotionEvent_getFlags(const AInputEvent *motion_event)`	`int32_t` Get the motion event flags.
`AMotionEvent_getHistoricalAxisValue(const AInputEvent *motion_event, int32_t axis, size_t pointer_index, size_t history_index)`	`float` Get the historical value of the request axis for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalEventTime(const AInputEvent *motion_event, size_t history_index)`	`int64_t` Get the time that a historical movement occurred between this event and the previous event, in the java.lang.System.nanoTime() time base.
`AMotionEvent_getHistoricalOrientation(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical orientation of the touch area and tool area in radians clockwise from vertical for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalPressure(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical pressure of this event for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalRawX(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical raw X coordinate of this event for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalRawY(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical raw Y coordinate of this event for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalSize(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the current scaled value of the approximate size for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalToolMajor(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical length of the major axis of an ellipse that describes the size of the approaching tool for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalToolMinor(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical length of the minor axis of an ellipse that describes the size of the approaching tool for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalTouchMajor(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical length of the major axis of an ellipse that describes the touch area at the point of contact for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalTouchMinor(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical length of the minor axis of an ellipse that describes the touch area at the point of contact for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalX(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical X coordinate of this event for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistoricalY(const AInputEvent *motion_event, size_t pointer_index, size_t history_index)`	`float` Get the historical Y coordinate of this event for the given pointer index that occurred between this event and the previous motion event.
`AMotionEvent_getHistorySize(const AInputEvent *motion_event)`	`size_t` Get the number of historical points in this event.
`AMotionEvent_getMetaState(const AInputEvent *motion_event)`	`int32_t` Get the state of any meta / modifier keys that were in effect when the event was generated.
`AMotionEvent_getOrientation(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current orientation of the touch area and tool area in radians clockwise from vertical for the given pointer index.
`AMotionEvent_getPointerCount(const AInputEvent *motion_event)`	`size_t` Get the number of pointers of data contained in this event.
`AMotionEvent_getPointerId(const AInputEvent *motion_event, size_t pointer_index)`	`int32_t` Get the pointer identifier associated with a particular pointer data index in this event.
`AMotionEvent_getPressure(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current pressure of this event for the given pointer index.
`AMotionEvent_getRawX(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the original raw X coordinate of this event.
`AMotionEvent_getRawY(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the original raw X coordinate of this event.
`AMotionEvent_getSize(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current scaled value of the approximate size for the given pointer index.
`AMotionEvent_getToolMajor(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current length of the major axis of an ellipse that describes the size of the approaching tool for the given pointer index.
`AMotionEvent_getToolMinor(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current length of the minor axis of an ellipse that describes the size of the approaching tool for the given pointer index.
`AMotionEvent_getToolType(const AInputEvent *motion_event, size_t pointer_index)`	`int32_t` Get the tool type of a pointer for the given pointer index.
`AMotionEvent_getTouchMajor(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current length of the major axis of an ellipse that describes the touch area at the point of contact for the given pointer index.
`AMotionEvent_getTouchMinor(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current length of the minor axis of an ellipse that describes the touch area at the point of contact for the given pointer index.
`AMotionEvent_getX(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current X coordinate of this event for the given pointer index.
`AMotionEvent_getXOffset(const AInputEvent *motion_event)`	`float` Get the X coordinate offset.
`AMotionEvent_getXPrecision(const AInputEvent *motion_event)`	`float` Get the precision of the X coordinates being reported.
`AMotionEvent_getY(const AInputEvent *motion_event, size_t pointer_index)`	`float` Get the current Y coordinate of this event for the given pointer index.
`AMotionEvent_getYOffset(const AInputEvent *motion_event)`	`float` Get the Y coordinate offset.
`AMotionEvent_getYPrecision(const AInputEvent *motion_event)`	`float` Get the precision of the Y coordinates being reported.

Enumerations

Anonymous Enum 32

Declared in android/input.h

 Anonymous Enum 32

Key states (may be returned by queries about the current state of a particular key code, scan code or switch).

Properties
`AKEY_STATE_DOWN`	The key is down.
`AKEY_STATE_UNKNOWN`	The key state is unknown or the requested key itself is not supported.
`AKEY_STATE_UP`	The key is up.
`AKEY_STATE_VIRTUAL`	The key is down but is a virtual key press that is being emulated by the system.

Anonymous Enum 33

Declared in android/input.h

 Anonymous Enum 33

Meta key / modifier state.

Properties
`AMETA_ALT_LEFT_ON`	This mask is used to check whether the left ALT meta key is pressed.
`AMETA_ALT_ON`	This mask is used to check whether one of the ALT meta keys is pressed.
`AMETA_ALT_RIGHT_ON`	This mask is used to check whether the right ALT meta key is pressed.
`AMETA_CAPS_LOCK_ON`	This mask is used to check whether the CAPS LOCK meta key is on.
`AMETA_CTRL_LEFT_ON`	This mask is used to check whether the left CTRL meta key is pressed.
`AMETA_CTRL_ON`	This mask is used to check whether one of the CTRL meta keys is pressed.
`AMETA_CTRL_RIGHT_ON`	This mask is used to check whether the right CTRL meta key is pressed.
`AMETA_FUNCTION_ON`	This mask is used to check whether the FUNCTION meta key is pressed.
`AMETA_META_LEFT_ON`	This mask is used to check whether the left META meta key is pressed.
`AMETA_META_ON`	This mask is used to check whether one of the META meta keys is pressed.
`AMETA_META_RIGHT_ON`	This mask is used to check whether the right META meta key is pressed.
`AMETA_NONE`	No meta keys are pressed.
`AMETA_NUM_LOCK_ON`	This mask is used to check whether the NUM LOCK meta key is on.
`AMETA_SCROLL_LOCK_ON`	This mask is used to check whether the SCROLL LOCK meta key is on.
`AMETA_SHIFT_LEFT_ON`	This mask is used to check whether the left SHIFT meta key is pressed.
`AMETA_SHIFT_ON`	This mask is used to check whether one of the SHIFT meta keys is pressed.
`AMETA_SHIFT_RIGHT_ON`	This mask is used to check whether the right SHIFT meta key is pressed.
`AMETA_SYM_ON`	This mask is used to check whether the SYM meta key is pressed.

Anonymous Enum 34

Declared in android/input.h

 Anonymous Enum 34

Input event types.

Properties
`AINPUT_EVENT_TYPE_CAPTURE`	Capture event.
`AINPUT_EVENT_TYPE_DRAG`	Drag event.
`AINPUT_EVENT_TYPE_FOCUS`	Focus event.
`AINPUT_EVENT_TYPE_KEY`	Indicates that the input event is a key event.
`AINPUT_EVENT_TYPE_MOTION`	Indicates that the input event is a motion event.
`AINPUT_EVENT_TYPE_TOUCH_MODE`	TouchMode event.

Anonymous Enum 35

Declared in android/input.h

 Anonymous Enum 35

Key event actions.

Properties

Properties
`AKEY_EVENT_ACTION_DOWN`	The key has been pressed down.
`AKEY_EVENT_ACTION_MULTIPLE`	Multiple duplicate key events have occurred in a row, or a complex string is being delivered. The repeat_count property of the key event contains the number of times the given key code should be executed.
`AKEY_EVENT_ACTION_UP`	The key has been released.

AKEY_EVENT_ACTION_DOWN

The key has been pressed down.

AKEY_EVENT_ACTION_MULTIPLE

Multiple duplicate key events have occurred in a row, or a complex string is being delivered.

The repeat_count property of the key event contains the number of times the given key code should be executed.

AKEY_EVENT_ACTION_UP

The key has been released.

Anonymous Enum 36

Declared in android/input.h

 Anonymous Enum 36

Key event flags.

Properties
`AKEY_EVENT_FLAG_CANCELED`	When associated with up key events, this indicates that the key press has been canceled. Typically this is used with virtual touch screen keys, where the user can slide from the virtual key area on to the display: in that case, the application will receive a canceled up event and should not perform the action normally associated with the key. Note that for this to work, the application can not perform an action for a key until it receives an up or the long press timeout has expired.
`AKEY_EVENT_FLAG_CANCELED_LONG_PRESS`	Set when a key event has AKEY_EVENT_FLAG_CANCELED set because a long press action was executed while it was down.
`AKEY_EVENT_FLAG_EDITOR_ACTION`	This mask is used for compatibility, to identify enter keys that are coming from an IME whose enter key has been auto-labelled "next" or "done". This allows TextView to dispatch these as normal enter keys for old applications, but still do the appropriate action when receiving them.
`AKEY_EVENT_FLAG_FALLBACK`	Set when a key event has been synthesized to implement default behavior for an event that the application did not handle. Fallback key events are generated by unhandled trackball motions (to emulate a directional keypad) and by certain unhandled key presses that are declared in the key map (such as special function numeric keypad keys when numlock is off).
`AKEY_EVENT_FLAG_FROM_SYSTEM`	This mask is set if an event was known to come from a trusted part of the system. That is, the event is known to come from the user, and could not have been spoofed by a third party component.
`AKEY_EVENT_FLAG_KEEP_TOUCH_MODE`	This mask is set if we don't want the key event to cause us to leave touch mode.
`AKEY_EVENT_FLAG_LONG_PRESS`	This flag is set for the first key repeat that occurs after the long press timeout.
`AKEY_EVENT_FLAG_SOFT_KEYBOARD`	This mask is set if the key event was generated by a software keyboard.
`AKEY_EVENT_FLAG_TRACKING`	Set for AKEY_EVENT_ACTION_UP when this event's key code is still being tracked from its initial down. That is, somebody requested that tracking started on the key down and a long press has not caused the tracking to be canceled.
`AKEY_EVENT_FLAG_VIRTUAL_HARD_KEY`	This key event was generated by a virtual (on-screen) hard key area. Typically this is an area of the touchscreen, outside of the regular display, dedicated to "hardware" buttons.
`AKEY_EVENT_FLAG_WOKE_HERE`	This mask is set if the device woke because of this key event.

Anonymous Enum 37

Declared in android/input.h

 Anonymous Enum 37

Motion event actions.

Properties
`AMOTION_EVENT_ACTION_BUTTON_PRESS`
`AMOTION_EVENT_ACTION_BUTTON_RELEASE`
`AMOTION_EVENT_ACTION_CANCEL`	The current gesture has been aborted. You will not receive any more points in it. You should treat this as an up event, but not perform any action that you normally would.
`AMOTION_EVENT_ACTION_DOWN`	A pressed gesture has started, the motion contains the initial starting location.
`AMOTION_EVENT_ACTION_HOVER_ENTER`	The pointer is not down but has entered the boundaries of a window or view.
`AMOTION_EVENT_ACTION_HOVER_EXIT`	The pointer is not down but has exited the boundaries of a window or view.
`AMOTION_EVENT_ACTION_HOVER_MOVE`	A change happened but the pointer is not down (unlike AMOTION_EVENT_ACTION_MOVE). The motion contains the most recent point, as well as any intermediate points since the last hover move event.
`AMOTION_EVENT_ACTION_MASK`	Bit mask of the parts of the action code that are the action itself.
`AMOTION_EVENT_ACTION_MOVE`	A change has happened during a press gesture (between AMOTION_EVENT_ACTION_DOWN and AMOTION_EVENT_ACTION_UP). The motion contains the most recent point, as well as any intermediate points since the last down or move event.
`AMOTION_EVENT_ACTION_OUTSIDE`	A movement has happened outside of the normal bounds of the UI element. This does not provide a full gesture, but only the initial location of the movement/touch.
`AMOTION_EVENT_ACTION_POINTER_DOWN`	A non-primary pointer has gone down. The bits in AMOTION_EVENT_ACTION_POINTER_INDEX_MASK indicate which pointer changed.
`AMOTION_EVENT_ACTION_POINTER_INDEX_MASK`	Bits in the action code that represent a pointer index, used with AMOTION_EVENT_ACTION_POINTER_DOWN and AMOTION_EVENT_ACTION_POINTER_UP. Shifting down by AMOTION_EVENT_ACTION_POINTER_INDEX_SHIFT provides the actual pointer index where the data for the pointer going up or down can be found.
`AMOTION_EVENT_ACTION_POINTER_UP`	A non-primary pointer has gone up. The bits in AMOTION_EVENT_ACTION_POINTER_INDEX_MASK indicate which pointer changed.
`AMOTION_EVENT_ACTION_SCROLL`	The motion event contains relative vertical and/or horizontal scroll offsets. Use AMotionEvent_getAxisValue to retrieve the information from AMOTION_EVENT_AXIS_VSCROLL and AMOTION_EVENT_AXIS_HSCROLL. The pointer may or may not be down when this event is dispatched. This action is always delivered to the winder under the pointer, which may not be the window currently touched.
`AMOTION_EVENT_ACTION_UP`	A pressed gesture has finished, the motion contains the final release location as well as any intermediate points since the last down or move event.

Anonymous Enum 38

Declared in android/input.h

 Anonymous Enum 38

Motion event flags.

Properties

Properties
`AMOTION_EVENT_FLAG_WINDOW_IS_OBSCURED`	This flag indicates that the window that received this motion event is partly or wholly obscured by another visible window above it. This flag is set to true even if the event did not directly pass through the obscured area. A security sensitive application can check this flag to identify situations in which a malicious application may have covered up part of its content for the purpose of misleading the user or hijacking touches. An appropriate response might be to drop the suspect touches or to take additional precautions to confirm the user's actual intent.

AMOTION_EVENT_FLAG_WINDOW_IS_OBSCURED

This flag indicates that the window that received this motion event is partly or wholly obscured by another visible window above it.

This flag is set to true even if the event did not directly pass through the obscured area. A security sensitive application can check this flag to identify situations in which a malicious application may have covered up part of its content for the purpose of misleading the user or hijacking touches. An appropriate response might be to drop the suspect touches or to take additional precautions to confirm the user's actual intent.

Anonymous Enum 39

Declared in android/input.h

 Anonymous Enum 39

Motion event edge touch flags.

Properties
`AMOTION_EVENT_EDGE_FLAG_BOTTOM`	Flag indicating the motion event intersected the bottom edge of the screen.
`AMOTION_EVENT_EDGE_FLAG_LEFT`	Flag indicating the motion event intersected the left edge of the screen.
`AMOTION_EVENT_EDGE_FLAG_NONE`	No edges intersected.
`AMOTION_EVENT_EDGE_FLAG_RIGHT`	Flag indicating the motion event intersected the right edge of the screen.
`AMOTION_EVENT_EDGE_FLAG_TOP`	Flag indicating the motion event intersected the top edge of the screen.

Anonymous Enum 40

Declared in android/input.h

 Anonymous Enum 40

Constants that identify each individual axis of a motion event.

Properties
`AMOTION_EVENT_AXIS_BRAKE`	Axis constant: Brake axis of a motion event. For a joystick, reports the absolute position of the brake control. The value is normalized to a range from 0.0 (no braking) to 1.0 (maximum braking).
`AMOTION_EVENT_AXIS_DISTANCE`	Axis constant: Distance axis of a motion event. For a stylus, reports the distance of the stylus from the screen. A value of 0.0 indicates direct contact and larger values indicate increasing distance from the surface.
`AMOTION_EVENT_AXIS_GAS`	Axis constant: Gas axis of a motion event. For a joystick, reports the absolute position of the gas (accelerator) control. The value is normalized to a range from 0.0 (no acceleration) to 1.0 (maximum acceleration).
`AMOTION_EVENT_AXIS_GENERIC_1`	Axis constant: Generic 1 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_10`	Axis constant: Generic 10 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_11`	Axis constant: Generic 11 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_12`	Axis constant: Generic 12 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_13`	Axis constant: Generic 13 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_14`	Axis constant: Generic 14 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_15`	Axis constant: Generic 15 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_16`	Axis constant: Generic 16 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_2`	Axis constant: Generic 2 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_3`	Axis constant: Generic 3 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_4`	Axis constant: Generic 4 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_5`	Axis constant: Generic 5 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_6`	Axis constant: Generic 6 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_7`	Axis constant: Generic 7 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_8`	Axis constant: Generic 8 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GENERIC_9`	Axis constant: Generic 9 axis of a motion event. The interpretation of a generic axis is device-specific.
`AMOTION_EVENT_AXIS_GESTURE_PINCH_SCALE_FACTOR`	Axis constant: pinch scale factor of a motion event. For a touch pad, reports the change in distance between the fingers when the user is making a pinch gesture, as a proportion of that distance when the gesture was last reported. For example, if the fingers were 50 units apart and are now 52 units apart, the scale factor would be 1.04. These values are relative to the state from the last event, not accumulated, so developers should make sure to process this axis value for all batched historical events. This axis is only set on the first pointer in a motion event.
`AMOTION_EVENT_AXIS_GESTURE_SCROLL_X_DISTANCE`	Axis constant: X scroll distance axis of a motion event. For a touch pad, reports the distance that should be scrolled in the X axis as a result of the user's two-finger scroll gesture, in display pixels. These values are relative to the state from the last event, not accumulated, so developers should make sure to process this axis value for all batched historical events. This axis is only set on the first pointer in a motion event.
`AMOTION_EVENT_AXIS_GESTURE_SCROLL_Y_DISTANCE`	Axis constant: Y scroll distance axis of a motion event. The same as AMOTION_EVENT_AXIS_GESTURE_SCROLL_X_DISTANCE, but for the Y axis.
`AMOTION_EVENT_AXIS_GESTURE_SWIPE_FINGER_COUNT`	Axis constant: the number of fingers being used in a multi-finger swipe gesture. For a touch pad, reports the number of fingers being used in a multi-finger swipe gesture (with CLASSIFICATION_MULTI_FINGER_SWIPE). Since CLASSIFICATION_MULTI_FINGER_SWIPE is a hidden API, so is this axis. It is only set on the first pointer in a motion event.
`AMOTION_EVENT_AXIS_GESTURE_X_OFFSET`	Axis constant: X gesture offset axis of a motion event. For a touch pad, reports the distance that a swipe gesture has moved in the X axis, as a proportion of the touch pad's size. For example, if a touch pad is 1000 units wide, and a swipe gesture starts at X = 500 then moves to X = 400, this axis would have a value of -0.1. These values are relative to the state from the last event, not accumulated, so developers should make sure to process this axis value for all batched historical events. This axis is only set on the first pointer in a motion event.
`AMOTION_EVENT_AXIS_GESTURE_Y_OFFSET`	Axis constant: Y gesture offset axis of a motion event. The same as AMOTION_EVENT_AXIS_GESTURE_X_OFFSET, but for the Y axis.
`AMOTION_EVENT_AXIS_HAT_X`	Axis constant: Hat X axis of a motion event. For a joystick, reports the absolute X position of the directional hat control. The value is normalized to a range from -1.0 (left) to 1.0 (right).
`AMOTION_EVENT_AXIS_HAT_Y`	Axis constant: Hat Y axis of a motion event. For a joystick, reports the absolute Y position of the directional hat control. The value is normalized to a range from -1.0 (up) to 1.0 (down).
`AMOTION_EVENT_AXIS_HSCROLL`	Axis constant: Horizontal Scroll axis of a motion event. For a mouse, reports the relative movement of the horizontal scroll wheel. The value is normalized to a range from -1.0 (left) to 1.0 (right). This axis should be used to scroll views horizontally.
`AMOTION_EVENT_AXIS_LTRIGGER`	Axis constant: Left Trigger axis of a motion event. For a joystick, reports the absolute position of the left trigger control. The value is normalized to a range from 0.0 (released) to 1.0 (fully pressed).
`AMOTION_EVENT_AXIS_ORIENTATION`	Axis constant: Orientation axis of a motion event. For a touch screen or touch pad, reports the orientation of the finger or tool in radians relative to the vertical plane of the device. An angle of 0 radians indicates that the major axis of contact is oriented upwards, is perfectly circular or is of unknown orientation. A positive angle indicates that the major axis of contact is oriented to the right. A negative angle indicates that the major axis of contact is oriented to the left. The full range is from -PI/2 radians (finger pointing fully left) to PI/2 radians (finger pointing fully right). For a stylus, the orientation indicates the direction in which the stylus is pointing in relation to the vertical axis of the current orientation of the screen. The range is from -PI radians to PI radians, where 0 is pointing up, -PI/2 radians is pointing left, -PI or PI radians is pointing down, and PI/2 radians is pointing right. See also AMOTION_EVENT_AXIS_TILT.
`AMOTION_EVENT_AXIS_PRESSURE`	Axis constant: Pressure axis of a motion event. For a touch screen or touch pad, reports the approximate pressure applied to the surface by a finger or other tool. The value is normalized to a range from 0 (no pressure at all) to 1 (normal pressure), although values higher than 1 may be generated depending on the calibration of the input device. For a trackball, the value is set to 1 if the trackball button is pressed or 0 otherwise. For a mouse, the value is set to 1 if the primary mouse button is pressed or 0 otherwise.
`AMOTION_EVENT_AXIS_RELATIVE_X`	Axis constant: The movement of x position of a motion event. For a mouse, reports a difference of x position between the previous position. This is useful when pointer is captured, in that case the mouse pointer doesn't change the location but this axis reports the difference which allows the app to see how the mouse is moved.
`AMOTION_EVENT_AXIS_RELATIVE_Y`	Axis constant: The movement of y position of a motion event. Same as AMOTION_EVENT_AXIS_RELATIVE_X, but for y position.
`AMOTION_EVENT_AXIS_RTRIGGER`	Axis constant: Right Trigger axis of a motion event. For a joystick, reports the absolute position of the right trigger control. The value is normalized to a range from 0.0 (released) to 1.0 (fully pressed).
`AMOTION_EVENT_AXIS_RUDDER`	Axis constant: Rudder axis of a motion event. For a joystick, reports the absolute position of the rudder control. The value is normalized to a range from -1.0 (turn left) to 1.0 (turn right).
`AMOTION_EVENT_AXIS_RX`	Axis constant: X Rotation axis of a motion event. For a joystick, reports the absolute rotation angle about the X axis. The value is normalized to a range from -1.0 (counter-clockwise) to 1.0 (clockwise).
`AMOTION_EVENT_AXIS_RY`	Axis constant: Y Rotation axis of a motion event. For a joystick, reports the absolute rotation angle about the Y axis. The value is normalized to a range from -1.0 (counter-clockwise) to 1.0 (clockwise).
`AMOTION_EVENT_AXIS_RZ`	Axis constant: Z Rotation axis of a motion event. For a joystick, reports the absolute rotation angle about the Z axis. The value is normalized to a range from -1.0 (counter-clockwise) to 1.0 (clockwise). On game pads with two analog joysticks, this axis is often reinterpreted to report the absolute Y position of the second joystick instead.
`AMOTION_EVENT_AXIS_SCROLL`	Axis constant: Generic scroll axis of a motion event. This is used for scroll axis motion events that can't be classified as strictly vertical or horizontal. The movement of a rotating scroller is an example of this.
`AMOTION_EVENT_AXIS_SIZE`	Axis constant: Size axis of a motion event. For a touch screen or touch pad, reports the approximate size of the contact area in relation to the maximum detectable size for the device. The value is normalized to a range from 0 (smallest detectable size) to 1 (largest detectable size), although it is not a linear scale. This value is of limited use. To obtain calibrated size information, see AMOTION_EVENT_AXIS_TOUCH_MAJOR or AMOTION_EVENT_AXIS_TOOL_MAJOR.
`AMOTION_EVENT_AXIS_THROTTLE`	Axis constant: Throttle axis of a motion event. For a joystick, reports the absolute position of the throttle control. The value is normalized to a range from 0.0 (fully open) to 1.0 (fully closed).
`AMOTION_EVENT_AXIS_TILT`	Axis constant: Tilt axis of a motion event. For a stylus, reports the tilt angle of the stylus in radians where 0 radians indicates that the stylus is being held perpendicular to the surface, and PI/2 radians indicates that the stylus is being held flat against the surface.
`AMOTION_EVENT_AXIS_TOOL_MAJOR`	Axis constant: ToolMajor axis of a motion event. For a touch screen, reports the length of the major axis of an ellipse that represents the size of the approaching finger or tool used to make contact. For a touch pad, reports the length of the major axis of an ellipse that represents the size of the approaching finger or tool used to make contact. The units are device-dependent. When the touch is circular, the major and minor axis lengths will be equal to one another. The tool size may be larger than the touch size since the tool may not be fully in contact with the touch sensor.
`AMOTION_EVENT_AXIS_TOOL_MINOR`	Axis constant: ToolMinor axis of a motion event. For a touch screen, reports the length of the minor axis of an ellipse that represents the size of the approaching finger or tool used to make contact. For a touch pad, reports the length of the minor axis of an ellipse that represents the size of the approaching finger or tool used to make contact. The units are device-dependent. When the touch is circular, the major and minor axis lengths will be equal to one another. The tool size may be larger than the touch size since the tool may not be fully in contact with the touch sensor.
`AMOTION_EVENT_AXIS_TOUCH_MAJOR`	Axis constant: TouchMajor axis of a motion event. For a touch screen, reports the length of the major axis of an ellipse that represents the touch area at the point of contact. The units are display pixels. For a touch pad, reports the length of the major axis of an ellipse that represents the touch area at the point of contact. The units are device-dependent.
`AMOTION_EVENT_AXIS_TOUCH_MINOR`	Axis constant: TouchMinor axis of a motion event. For a touch screen, reports the length of the minor axis of an ellipse that represents the touch area at the point of contact. The units are display pixels. For a touch pad, reports the length of the minor axis of an ellipse that represents the touch area at the point of contact. The units are device-dependent. When the touch is circular, the major and minor axis lengths will be equal to one another.
`AMOTION_EVENT_AXIS_VSCROLL`	Axis constant: Vertical Scroll axis of a motion event. For a mouse, reports the relative movement of the vertical scroll wheel. The value is normalized to a range from -1.0 (down) to 1.0 (up). This axis should be used to scroll views vertically.
`AMOTION_EVENT_AXIS_WHEEL`	Axis constant: Wheel axis of a motion event. For a joystick, reports the absolute position of the steering wheel control. The value is normalized to a range from -1.0 (turn left) to 1.0 (turn right).
`AMOTION_EVENT_AXIS_X`	Axis constant: X axis of a motion event. For a touch screen, reports the absolute X screen position of the center of the touch contact area. The units are display pixels. For a touch pad, reports the absolute X surface position of the center of the touch contact area. The units are device-dependent. For a mouse, reports the absolute X screen position of the mouse pointer. The units are display pixels. For a trackball, reports the relative horizontal displacement of the trackball. The value is normalized to a range from -1.0 (left) to 1.0 (right). For a joystick, reports the absolute X position of the joystick. The value is normalized to a range from -1.0 (left) to 1.0 (right).
`AMOTION_EVENT_AXIS_Y`	Axis constant: Y axis of a motion event. For a touch screen, reports the absolute Y screen position of the center of the touch contact area. The units are display pixels. For a touch pad, reports the absolute Y surface position of the center of the touch contact area. The units are device-dependent. For a mouse, reports the absolute Y screen position of the mouse pointer. The units are display pixels. For a trackball, reports the relative vertical displacement of the trackball. The value is normalized to a range from -1.0 (up) to 1.0 (down). For a joystick, reports the absolute Y position of the joystick. The value is normalized to a range from -1.0 (up or far) to 1.0 (down or near).
`AMOTION_EVENT_AXIS_Z`	Axis constant: Z axis of a motion event. For a joystick, reports the absolute Z position of the joystick. The value is normalized to a range from -1.0 (high) to 1.0 (low). On game pads with two analog joysticks, this axis is often reinterpreted to report the absolute X position of the second joystick instead.
`AMOTION_EVENT_MAXIMUM_VALID_AXIS_VALUE`	Note: This is not an "Axis constant". It does not represent any axis, nor should it be used to represent any axis. It is a constant holding the value of the largest defined axis value, to make some computations (like iterating through all possible axes) cleaner. Please update the value accordingly if you add a new axis.

Anonymous Enum 41

Declared in android/input.h

 Anonymous Enum 41

Constants that identify buttons that are associated with motion events.

Refer to the documentation on the MotionEvent class for descriptions of each button.

Properties
`AMOTION_EVENT_BUTTON_BACK`	back
`AMOTION_EVENT_BUTTON_FORWARD`	forward
`AMOTION_EVENT_BUTTON_PRIMARY`	primary
`AMOTION_EVENT_BUTTON_SECONDARY`	secondary
`AMOTION_EVENT_BUTTON_STYLUS_PRIMARY`
`AMOTION_EVENT_BUTTON_STYLUS_SECONDARY`
`AMOTION_EVENT_BUTTON_TERTIARY`	tertiary

Anonymous Enum 42

Declared in android/input.h

 Anonymous Enum 42

Constants that identify tool types.

Refer to the documentation on the MotionEvent class for descriptions of each tool type.

Properties
`AMOTION_EVENT_TOOL_TYPE_ERASER`	eraser
`AMOTION_EVENT_TOOL_TYPE_FINGER`	finger
`AMOTION_EVENT_TOOL_TYPE_MOUSE`	mouse
`AMOTION_EVENT_TOOL_TYPE_PALM`	palm
`AMOTION_EVENT_TOOL_TYPE_STYLUS`	stylus
`AMOTION_EVENT_TOOL_TYPE_UNKNOWN`	unknown

Anonymous Enum 43

Declared in android/input.h

 Anonymous Enum 43

Input source masks.

Refer to the documentation on android.view.InputDevice for more details about input sources and their correct interpretation.

Properties
`AINPUT_SOURCE_CLASS_BUTTON`	button
`AINPUT_SOURCE_CLASS_JOYSTICK`	joystick
`AINPUT_SOURCE_CLASS_MASK`	mask
`AINPUT_SOURCE_CLASS_NAVIGATION`	navigation
`AINPUT_SOURCE_CLASS_NONE`	none
`AINPUT_SOURCE_CLASS_POINTER`	pointer
`AINPUT_SOURCE_CLASS_POSITION`	position

Anonymous Enum 44

Declared in android/input.h

 Anonymous Enum 44

Input sources.

Properties
`AINPUT_SOURCE_ANY`	any
`AINPUT_SOURCE_BLUETOOTH_STYLUS`	bluetooth stylus
`AINPUT_SOURCE_DPAD`	dpad
`AINPUT_SOURCE_GAMEPAD`	gamepad
`AINPUT_SOURCE_HDMI`	HDMI.
`AINPUT_SOURCE_JOYSTICK`	joystick
`AINPUT_SOURCE_KEYBOARD`	keyboard
`AINPUT_SOURCE_MOUSE`	mouse
`AINPUT_SOURCE_MOUSE_RELATIVE`	mouse relative
`AINPUT_SOURCE_ROTARY_ENCODER`	rotary encoder
`AINPUT_SOURCE_SENSOR`	sensor
`AINPUT_SOURCE_STYLUS`	stylus
`AINPUT_SOURCE_TOUCHPAD`	touchpad
`AINPUT_SOURCE_TOUCHSCREEN`	touchscreen
`AINPUT_SOURCE_TOUCH_NAVIGATION`	navigation
`AINPUT_SOURCE_TRACKBALL`	trackball
`AINPUT_SOURCE_UNKNOWN`	unknown

Anonymous Enum 45

Declared in android/input.h

 Anonymous Enum 45

Keyboard types.

Refer to the documentation on android.view.InputDevice for more details. Note: When adding a new keyboard type here InputDeviceInfo::setKeyboardType needs to be updated.

Properties
`AINPUT_KEYBOARD_TYPE_ALPHABETIC`	alphabetic
`AINPUT_KEYBOARD_TYPE_NONE`	none
`AINPUT_KEYBOARD_TYPE_NON_ALPHABETIC`	non alphabetic

Anonymous Enum 46

Declared in android/input.h

 Anonymous Enum 46

Constants used to retrieve information about the range of motion for a particular coordinate of a motion event.

Refer to the documentation on android.view.InputDevice for more details about input sources and their correct interpretation.

Properties
`AINPUT_MOTION_RANGE_ORIENTATION`	orientation
`AINPUT_MOTION_RANGE_PRESSURE`	pressure
`AINPUT_MOTION_RANGE_SIZE`	size
`AINPUT_MOTION_RANGE_TOOL_MAJOR`	tool major
`AINPUT_MOTION_RANGE_TOOL_MINOR`	tool minor
`AINPUT_MOTION_RANGE_TOUCH_MAJOR`	touch major
`AINPUT_MOTION_RANGE_TOUCH_MINOR`	touch minor
`AINPUT_MOTION_RANGE_X`	x
`AINPUT_MOTION_RANGE_Y`	y

Anonymous Enum 47

Declared in android/keycodes.h

 Anonymous Enum 47

Key codes.

Properties
`AKEYCODE_0`	'0' key.
`AKEYCODE_1`	'1' key.
`AKEYCODE_11`	'11' key.
`AKEYCODE_12`	'12' key.
`AKEYCODE_2`	'2' key.
`AKEYCODE_3`	'3' key.
`AKEYCODE_3D_MODE`	3D Mode key. Toggles the display between 2D and 3D mode.
`AKEYCODE_4`	'4' key.
`AKEYCODE_5`	'5' key.
`AKEYCODE_6`	'6' key.
`AKEYCODE_7`	'7' key.
`AKEYCODE_8`	'8' key.
`AKEYCODE_9`	'9' key.
`AKEYCODE_A`	'A' key.
`AKEYCODE_ALL_APPS`	all apps
`AKEYCODE_ALT_LEFT`	Left Alt modifier key.
`AKEYCODE_ALT_RIGHT`	Right Alt modifier key.
`AKEYCODE_APOSTROPHE`	''' (apostrophe) key.
`AKEYCODE_APP_SWITCH`	App switch key. Should bring up the application switcher dialog.
`AKEYCODE_ASSIST`	Assist key. Launches the global assist activity. Not delivered to applications.
`AKEYCODE_AT`	'@' key.
`AKEYCODE_AVR_INPUT`	A/V Receiver input key. On TV remotes, switches the input mode on an external A/V Receiver.
`AKEYCODE_AVR_POWER`	A/V Receiver power key. On TV remotes, toggles the power on an external A/V Receiver.
`AKEYCODE_B`	'B' key.
`AKEYCODE_BACK`	Back key.
`AKEYCODE_BACKSLASH`	'\' key.
`AKEYCODE_BOOKMARK`	Bookmark key. On some TV remotes, bookmarks content or web pages.
`AKEYCODE_BREAK`	Break / Pause key.
`AKEYCODE_BRIGHTNESS_DOWN`	Brightness Down key. Adjusts the screen brightness down.
`AKEYCODE_BRIGHTNESS_UP`	Brightness Up key. Adjusts the screen brightness up.
`AKEYCODE_BUTTON_1`	Generic Game Pad Button #1.
`AKEYCODE_BUTTON_10`	Generic Game Pad Button #10.
`AKEYCODE_BUTTON_11`	Generic Game Pad Button #11.
`AKEYCODE_BUTTON_12`	Generic Game Pad Button #12.
`AKEYCODE_BUTTON_13`	Generic Game Pad Button #13.
`AKEYCODE_BUTTON_14`	Generic Game Pad Button #14.
`AKEYCODE_BUTTON_15`	Generic Game Pad Button #15.
`AKEYCODE_BUTTON_16`	Generic Game Pad Button #16.
`AKEYCODE_BUTTON_2`	Generic Game Pad Button #2.
`AKEYCODE_BUTTON_3`	Generic Game Pad Button #3.
`AKEYCODE_BUTTON_4`	Generic Game Pad Button #4.
`AKEYCODE_BUTTON_5`	Generic Game Pad Button #5.
`AKEYCODE_BUTTON_6`	Generic Game Pad Button #6.
`AKEYCODE_BUTTON_7`	Generic Game Pad Button #7.
`AKEYCODE_BUTTON_8`	Generic Game Pad Button #8.
`AKEYCODE_BUTTON_9`	Generic Game Pad Button #9.
`AKEYCODE_BUTTON_A`	A Button key. On a game controller, the A button should be either the button labeled A or the first button on the bottom row of controller buttons.
`AKEYCODE_BUTTON_B`	B Button key. On a game controller, the B button should be either the button labeled B or the second button on the bottom row of controller buttons.
`AKEYCODE_BUTTON_C`	C Button key. On a game controller, the C button should be either the button labeled C or the third button on the bottom row of controller buttons.
`AKEYCODE_BUTTON_L1`	L1 Button key. On a game controller, the L1 button should be either the button labeled L1 (or L) or the top left trigger button.
`AKEYCODE_BUTTON_L2`	L2 Button key. On a game controller, the L2 button should be either the button labeled L2 or the bottom left trigger button.
`AKEYCODE_BUTTON_MODE`	Mode Button key. On a game controller, the button labeled Mode.
`AKEYCODE_BUTTON_R1`	R1 Button key. On a game controller, the R1 button should be either the button labeled R1 (or R) or the top right trigger button.
`AKEYCODE_BUTTON_R2`	R2 Button key. On a game controller, the R2 button should be either the button labeled R2 or the bottom right trigger button.
`AKEYCODE_BUTTON_SELECT`	Select Button key. On a game controller, the button labeled Select.
`AKEYCODE_BUTTON_START`	Start Button key. On a game controller, the button labeled Start.
`AKEYCODE_BUTTON_THUMBL`	Left Thumb Button key. On a game controller, the left thumb button indicates that the left (or only) joystick is pressed.
`AKEYCODE_BUTTON_THUMBR`	Right Thumb Button key. On a game controller, the right thumb button indicates that the right joystick is pressed.
`AKEYCODE_BUTTON_X`	X Button key. On a game controller, the X button should be either the button labeled X or the first button on the upper row of controller buttons.
`AKEYCODE_BUTTON_Y`	Y Button key. On a game controller, the Y button should be either the button labeled Y or the second button on the upper row of controller buttons.
`AKEYCODE_BUTTON_Z`	Z Button key. On a game controller, the Z button should be either the button labeled Z or the third button on the upper row of controller buttons.
`AKEYCODE_C`	'C' key.
`AKEYCODE_CALCULATOR`	Calculator special function key. Used to launch a calculator application.
`AKEYCODE_CALENDAR`	Calendar special function key. Used to launch a calendar application.
`AKEYCODE_CALL`	Call key.
`AKEYCODE_CAMERA`	Camera key. Used to launch a camera application or take pictures.
`AKEYCODE_CAPS_LOCK`	Caps Lock key.
`AKEYCODE_CAPTIONS`	Toggle captions key. Switches the mode for closed-captioning text, for example during television shows.
`AKEYCODE_CHANNEL_DOWN`	Channel down key. On TV remotes, decrements the television channel.
`AKEYCODE_CHANNEL_UP`	Channel up key. On TV remotes, increments the television channel.
`AKEYCODE_CLEAR`	Clear key.
`AKEYCODE_COMMA`	',' key.
`AKEYCODE_CONTACTS`	Contacts special function key. Used to launch an address book application.
`AKEYCODE_COPY`	Copy key.
`AKEYCODE_CTRL_LEFT`	Left Control modifier key.
`AKEYCODE_CTRL_RIGHT`	Right Control modifier key.
`AKEYCODE_CUT`	Cut key.
`AKEYCODE_D`	'D' key.
`AKEYCODE_DEL`	Backspace key. Deletes characters before the insertion point, unlike AKEYCODE_FORWARD_DEL.
`AKEYCODE_DEMO_APP_1`	Demo Application key #1.
`AKEYCODE_DEMO_APP_2`	Demo Application key #2.
`AKEYCODE_DEMO_APP_3`	Demo Application key #3.
`AKEYCODE_DEMO_APP_4`	Demo Application key #4.
`AKEYCODE_DPAD_CENTER`	Directional Pad Center key. May also be synthesized from trackball motions.
`AKEYCODE_DPAD_DOWN`	Directional Pad Down key. May also be synthesized from trackball motions.
`AKEYCODE_DPAD_DOWN_LEFT`	Directional Pad Down-Left.
`AKEYCODE_DPAD_DOWN_RIGHT`	Directional Pad Down-Right.
`AKEYCODE_DPAD_LEFT`	Directional Pad Left key. May also be synthesized from trackball motions.
`AKEYCODE_DPAD_RIGHT`	Directional Pad Right key. May also be synthesized from trackball motions.
`AKEYCODE_DPAD_UP`	Directional Pad Up key. May also be synthesized from trackball motions.
`AKEYCODE_DPAD_UP_LEFT`	Directional Pad Up-Left.
`AKEYCODE_DPAD_UP_RIGHT`	Directional Pad Up-Right.
`AKEYCODE_DVR`	DVR key. On some TV remotes, switches to a DVR mode for recorded shows.
`AKEYCODE_E`	'E' key.
`AKEYCODE_EISU`	Japanese alphanumeric key.
`AKEYCODE_EMOJI_PICKER`	Open Emoji picker.
`AKEYCODE_ENDCALL`	End Call key.
`AKEYCODE_ENTER`	Enter key.
`AKEYCODE_ENVELOPE`	Envelope special function key. Used to launch a mail application.
`AKEYCODE_EQUALS`	'=' key.
`AKEYCODE_ESCAPE`	Escape key.
`AKEYCODE_EXPLORER`	Explorer special function key. Used to launch a browser application.
`AKEYCODE_F`	'F' key.
`AKEYCODE_F1`	F1 key.
`AKEYCODE_F10`	F10 key.
`AKEYCODE_F11`	F11 key.
`AKEYCODE_F12`	F12 key.
`AKEYCODE_F2`	F2 key.
`AKEYCODE_F3`	F3 key.
`AKEYCODE_F4`	F4 key.
`AKEYCODE_F5`	F5 key.
`AKEYCODE_F6`	F6 key.
`AKEYCODE_F7`	F7 key.
`AKEYCODE_F8`	F8 key.
`AKEYCODE_F9`	F9 key.
`AKEYCODE_FEATURED_APP_1`	Featured Application key #1.
`AKEYCODE_FEATURED_APP_2`	Featured Application key #2.
`AKEYCODE_FEATURED_APP_3`	Featured Application key #3.
`AKEYCODE_FEATURED_APP_4`	Featured Application key #4.
`AKEYCODE_FOCUS`	Camera Focus key. Used to focus the camera.
`AKEYCODE_FORWARD`	Forward key. Navigates forward in the history stack. Complement of AKEYCODE_BACK.
`AKEYCODE_FORWARD_DEL`	Forward Delete key. Deletes characters ahead of the insertion point, unlike AKEYCODE_DEL.
`AKEYCODE_FUNCTION`	Function modifier key.
`AKEYCODE_G`	'G' key.
`AKEYCODE_GRAVE`	'`' (backtick) key.
`AKEYCODE_GUIDE`	Guide key. On TV remotes, shows a programming guide.
`AKEYCODE_H`	'H' key.
`AKEYCODE_HEADSETHOOK`	Headset Hook key. Used to hang up calls and stop media.
`AKEYCODE_HELP`	Help key.
`AKEYCODE_HENKAN`	Japanese conversion key.
`AKEYCODE_HOME`	Home key. This key is handled by the framework and is never delivered to applications.
`AKEYCODE_I`	'I' key.
`AKEYCODE_INFO`	Info key. Common on TV remotes to show additional information related to what is currently being viewed.
`AKEYCODE_INSERT`	Insert key. Toggles insert / overwrite edit mode.
`AKEYCODE_J`	'J' key.
`AKEYCODE_K`	'K' key.
`AKEYCODE_KANA`	Japanese kana key.
`AKEYCODE_KATAKANA_HIRAGANA`	Japanese katakana / hiragana key.
`AKEYCODE_KEYBOARD_BACKLIGHT_DOWN`	Keyboard backlight Down key. Adjusts the keyboard backlight brightness down.
`AKEYCODE_KEYBOARD_BACKLIGHT_TOGGLE`	Keyboard backlight Toggle key. Toggles the keyboard backlight on/off.
`AKEYCODE_KEYBOARD_BACKLIGHT_UP`	Keyboard backlight Up key. Adjusts the keyboard backlight brightness up.
`AKEYCODE_L`	'L' key.
`AKEYCODE_LANGUAGE_SWITCH`	Language Switch key. Toggles the current input language such as switching between English and Japanese on a QWERTY keyboard. On some devices, the same function may be performed by pressing Shift+Spacebar.
`AKEYCODE_LAST_CHANNEL`	Last Channel key. Goes to the last viewed channel.
`AKEYCODE_LEFT_BRACKET`	'[' key.
`AKEYCODE_M`	'M' key.
`AKEYCODE_MACRO_1`	User customizable key #1.
`AKEYCODE_MACRO_2`	User customizable key #2.
`AKEYCODE_MACRO_3`	User customizable key #3.
`AKEYCODE_MACRO_4`	User customizable key #4.
`AKEYCODE_MANNER_MODE`	Manner Mode key. Toggles silent or vibrate mode on and off to make the device behave more politely in certain settings such as on a crowded train. On some devices, the key may only operate when long-pressed.
`AKEYCODE_MEDIA_AUDIO_TRACK`	Audio Track key. Switches the audio tracks.
`AKEYCODE_MEDIA_CLOSE`	Close media key. May be used to close a CD tray, for example.
`AKEYCODE_MEDIA_EJECT`	Eject media key. May be used to eject a CD tray, for example.
`AKEYCODE_MEDIA_FAST_FORWARD`	Fast Forward media key.
`AKEYCODE_MEDIA_NEXT`	Play Next media key.
`AKEYCODE_MEDIA_PAUSE`	Pause media key.
`AKEYCODE_MEDIA_PLAY`	Play media key.
`AKEYCODE_MEDIA_PLAY_PAUSE`	Play/Pause media key.
`AKEYCODE_MEDIA_PREVIOUS`	Play Previous media key.
`AKEYCODE_MEDIA_RECORD`	Record media key.
`AKEYCODE_MEDIA_REWIND`	Rewind media key.
`AKEYCODE_MEDIA_SKIP_BACKWARD`	Skip backward media key.
`AKEYCODE_MEDIA_SKIP_FORWARD`	Skip forward media key.
`AKEYCODE_MEDIA_STEP_BACKWARD`	Step backward media key. Steps media backward one from at a time.
`AKEYCODE_MEDIA_STEP_FORWARD`	Step forward media key. Steps media forward one from at a time.
`AKEYCODE_MEDIA_STOP`	Stop media key.
`AKEYCODE_MEDIA_TOP_MENU`	Media Top Menu key. Goes to the top of media menu.
`AKEYCODE_MENU`	Menu key.
`AKEYCODE_META_LEFT`	Left Meta modifier key.
`AKEYCODE_META_RIGHT`	Right Meta modifier key.
`AKEYCODE_MINUS`	'-'.
`AKEYCODE_MOVE_END`	End Movement key. Used for scrolling or moving the cursor around to the end of a line or to the bottom of a list.
`AKEYCODE_MOVE_HOME`	Home Movement key. Used for scrolling or moving the cursor around to the start of a line or to the top of a list.
`AKEYCODE_MUHENKAN`	Japanese non-conversion key.
`AKEYCODE_MUSIC`	Music special function key. Used to launch a music player application.
`AKEYCODE_MUTE`	Mute key. Mutes the microphone, unlike AKEYCODE_VOLUME_MUTE.
`AKEYCODE_N`	'N' key.
`AKEYCODE_NAVIGATE_IN`
`AKEYCODE_NAVIGATE_NEXT`
`AKEYCODE_NAVIGATE_OUT`
`AKEYCODE_NAVIGATE_PREVIOUS`
`AKEYCODE_NOTIFICATION`	Notification key.
`AKEYCODE_NUM`	Number modifier key. Used to enter numeric symbols. This key is not AKEYCODE_NUM_LOCK; it is more like AKEYCODE_ALT_LEFT.
`AKEYCODE_NUMPAD_0`	Numeric keypad '0' key.
`AKEYCODE_NUMPAD_1`	Numeric keypad '1' key.
`AKEYCODE_NUMPAD_2`	Numeric keypad '2' key.
`AKEYCODE_NUMPAD_3`	Numeric keypad '3' key.
`AKEYCODE_NUMPAD_4`	Numeric keypad '4' key.
`AKEYCODE_NUMPAD_5`	Numeric keypad '5' key.
`AKEYCODE_NUMPAD_6`	Numeric keypad '6' key.
`AKEYCODE_NUMPAD_7`	Numeric keypad '7' key.
`AKEYCODE_NUMPAD_8`	Numeric keypad '8' key.
`AKEYCODE_NUMPAD_9`	Numeric keypad '9' key.
`AKEYCODE_NUMPAD_ADD`	Numeric keypad '+' key (for addition).
`AKEYCODE_NUMPAD_COMMA`	Numeric keypad ',' key (for decimals or digit grouping).
`AKEYCODE_NUMPAD_DIVIDE`	Numeric keypad '/' key (for division).
`AKEYCODE_NUMPAD_DOT`	Numeric keypad '. ' key (for decimals or digit grouping).
`AKEYCODE_NUMPAD_ENTER`	Numeric keypad Enter key.
`AKEYCODE_NUMPAD_EQUALS`	Numeric keypad '=' key.
`AKEYCODE_NUMPAD_LEFT_PAREN`	Numeric keypad '(' key.
`AKEYCODE_NUMPAD_MULTIPLY`	Numeric keypad '*' key (for multiplication).
`AKEYCODE_NUMPAD_RIGHT_PAREN`	Numeric keypad ')' key.
`AKEYCODE_NUMPAD_SUBTRACT`	Numeric keypad '-' key (for subtraction).
`AKEYCODE_NUM_LOCK`	Num Lock key. This is the Num Lock key; it is different from AKEYCODE_NUM. This key alters the behavior of other keys on the numeric keypad.
`AKEYCODE_O`	'O' key.
`AKEYCODE_P`	'P' key.
`AKEYCODE_PAGE_DOWN`	Page Down key.
`AKEYCODE_PAGE_UP`	Page Up key.
`AKEYCODE_PAIRING`	Pairing key. Initiates peripheral pairing mode. Useful for pairing remote control devices or game controllers, especially if no other input mode is available.
`AKEYCODE_PASTE`	Paste key.
`AKEYCODE_PERIOD`	'. ' key.
`AKEYCODE_PICTSYMBOLS`	Picture Symbols modifier key. Used to switch symbol sets (Emoji, Kao-moji).
`AKEYCODE_PLUS`	'+' key.
`AKEYCODE_POUND`	'#' key.
`AKEYCODE_POWER`	Power key.
`AKEYCODE_PROFILE_SWITCH`	Used to switch current account that is consuming content. May be consumed by system to switch current viewer profile.
`AKEYCODE_PROG_BLUE`	Blue "programmable" key. On TV remotes, acts as a contextual/programmable key.
`AKEYCODE_PROG_GREEN`	Green "programmable" key. On TV remotes, actsas a contextual/programmable key.
`AKEYCODE_PROG_RED`	Red "programmable" key. On TV remotes, acts as a contextual/programmable key.
`AKEYCODE_PROG_YELLOW`	Yellow "programmable" key. On TV remotes, acts as a contextual/programmable key.
`AKEYCODE_Q`	'Q' key.
`AKEYCODE_R`	'R' key.
`AKEYCODE_RECENT_APPS`	Key to open recent apps (a.k.a. Overview)
`AKEYCODE_REFRESH`	refresh key
`AKEYCODE_RIGHT_BRACKET`	']' key.
`AKEYCODE_RO`	Japanese Ro key.
`AKEYCODE_S`	'S' key.
`AKEYCODE_SCREENSHOT`	Take Screenshot.
`AKEYCODE_SCROLL_LOCK`	Scroll Lock key.
`AKEYCODE_SEARCH`	Search key.
`AKEYCODE_SEMICOLON`	';' key.
`AKEYCODE_SETTINGS`	Settings key. Starts the system settings activity.
`AKEYCODE_SHIFT_LEFT`	Left Shift modifier key.
`AKEYCODE_SHIFT_RIGHT`	Right Shift modifier key.
`AKEYCODE_SLASH`	'/' key.
`AKEYCODE_SLEEP`	Sleep key. Puts the device to sleep. Behaves somewhat like AKEYCODE_POWER but it has no effect if the device is already asleep.
`AKEYCODE_SOFT_LEFT`	Soft Left key. Usually situated below the display on phones and used as a multi-function feature key for selecting a software defined function shown on the bottom left of the display.
`AKEYCODE_SOFT_RIGHT`	Soft Right key. Usually situated below the display on phones and used as a multi-function feature key for selecting a software defined function shown on the bottom right of the display.
`AKEYCODE_SOFT_SLEEP`	Put device to sleep unless a wakelock is held.
`AKEYCODE_SPACE`	Space key.
`AKEYCODE_STAR`	'*' key.
`AKEYCODE_STB_INPUT`	Set-top-box input key. On TV remotes, switches the input mode on an external Set-top-box.
`AKEYCODE_STB_POWER`	Set-top-box power key. On TV remotes, toggles the power on an external Set-top-box.
`AKEYCODE_STEM_1`	Generic stem key 1 for Wear.
`AKEYCODE_STEM_2`	Generic stem key 2 for Wear.
`AKEYCODE_STEM_3`	Generic stem key 3 for Wear.
`AKEYCODE_STEM_PRIMARY`	Primary stem key for Wear Main power/reset button on watch.
`AKEYCODE_STYLUS_BUTTON_PRIMARY`	The primary button on the barrel of a stylus. This is usually the button closest to the tip of the stylus.
`AKEYCODE_STYLUS_BUTTON_SECONDARY`	The secondary button on the barrel of a stylus. This is usually the second button from the tip of the stylus.
`AKEYCODE_STYLUS_BUTTON_TAIL`	A button on the tail end of a stylus.
`AKEYCODE_STYLUS_BUTTON_TERTIARY`	The tertiary button on the barrel of a stylus. This is usually the third button from the tip of the stylus.
`AKEYCODE_SWITCH_CHARSET`	Switch Charset modifier key. Used to switch character sets (Kanji, Katakana).
`AKEYCODE_SYM`	Symbol modifier key. Used to enter alternate symbols.
`AKEYCODE_SYSRQ`	System Request / Print Screen key.
`AKEYCODE_SYSTEM_NAVIGATION_DOWN`	fingerprint navigation key, down.
`AKEYCODE_SYSTEM_NAVIGATION_LEFT`	fingerprint navigation key, left.
`AKEYCODE_SYSTEM_NAVIGATION_RIGHT`	fingerprint navigation key, right.
`AKEYCODE_SYSTEM_NAVIGATION_UP`	fingerprint navigation key, up.
`AKEYCODE_T`	'T' key.
`AKEYCODE_TAB`	Tab key.
`AKEYCODE_THUMBS_DOWN`	Thumbs down key. Apps can use this to let user downvote content.
`AKEYCODE_THUMBS_UP`	Thumbs up key. Apps can use this to let user upvote content.
`AKEYCODE_TV`	TV key. On TV remotes, switches to viewing live TV.
`AKEYCODE_TV_ANTENNA_CABLE`	Antenna/Cable key. Toggles broadcast input source between antenna and cable.
`AKEYCODE_TV_AUDIO_DESCRIPTION`	Audio description key. Toggles audio description off / on.
`AKEYCODE_TV_AUDIO_DESCRIPTION_MIX_DOWN`	Audio description mixing volume down key. Lessen audio description volume as compared with normal audio volume.
`AKEYCODE_TV_AUDIO_DESCRIPTION_MIX_UP`	Audio description mixing volume up key. Louden audio description volume as compared with normal audio volume.
`AKEYCODE_TV_CONTENTS_MENU`	Contents menu key. Goes to the title list. Corresponds to Contents Menu (0x0B) of CEC User Control Code
`AKEYCODE_TV_DATA_SERVICE`	TV data service key. Displays data services like weather, sports.
`AKEYCODE_TV_INPUT`	TV input key. On TV remotes, switches the input on a television screen.
`AKEYCODE_TV_INPUT_COMPONENT_1`	Component #1 key. Switches to component video input #1.
`AKEYCODE_TV_INPUT_COMPONENT_2`	Component #2 key. Switches to component video input #2.
`AKEYCODE_TV_INPUT_COMPOSITE_1`	Composite #1 key. Switches to composite video input #1.
`AKEYCODE_TV_INPUT_COMPOSITE_2`	Composite #2 key. Switches to composite video input #2.
`AKEYCODE_TV_INPUT_HDMI_1`	HDMI #1 key. Switches to HDMI input #1.
`AKEYCODE_TV_INPUT_HDMI_2`	HDMI #2 key. Switches to HDMI input #2.
`AKEYCODE_TV_INPUT_HDMI_3`	HDMI #3 key. Switches to HDMI input #3.
`AKEYCODE_TV_INPUT_HDMI_4`	HDMI #4 key. Switches to HDMI input #4.
`AKEYCODE_TV_INPUT_VGA_1`	VGA #1 key. Switches to VGA (analog RGB) input #1.
`AKEYCODE_TV_MEDIA_CONTEXT_MENU`	Media context menu key. Goes to the context menu of media contents. Corresponds to Media Context-sensitive Menu (0x11) of CEC User Control Code.
`AKEYCODE_TV_NETWORK`	Toggle Network key. Toggles selecting broacast services.
`AKEYCODE_TV_NUMBER_ENTRY`	Number entry key. Initiates to enter multi-digit channel nubmber when each digit key is assigned for selecting separate channel. Corresponds to Number Entry Mode (0x1D) of CEC User Control Code.
`AKEYCODE_TV_POWER`	TV power key. On TV remotes, toggles the power on a television screen.
`AKEYCODE_TV_RADIO_SERVICE`	Radio key. Toggles TV service / Radio service.
`AKEYCODE_TV_SATELLITE`	Satellite key. Switches to digital satellite broadcast service.
`AKEYCODE_TV_SATELLITE_BS`	BS key. Switches to BS digital satellite broadcasting service available in Japan.
`AKEYCODE_TV_SATELLITE_CS`	CS key. Switches to CS digital satellite broadcasting service available in Japan.
`AKEYCODE_TV_SATELLITE_SERVICE`	BS/CS key. Toggles between BS and CS digital satellite services.
`AKEYCODE_TV_TELETEXT`	Teletext key. Displays Teletext service.
`AKEYCODE_TV_TERRESTRIAL_ANALOG`	Analog Terrestrial key. Switches to analog terrestrial broadcast service.
`AKEYCODE_TV_TERRESTRIAL_DIGITAL`	Digital Terrestrial key. Switches to digital terrestrial broadcast service.
`AKEYCODE_TV_TIMER_PROGRAMMING`	Timer programming key. Goes to the timer recording menu. Corresponds to Timer Programming (0x54) of CEC User Control Code.
`AKEYCODE_TV_ZOOM_MODE`	Zoom mode key. Changes Zoom mode (Normal, Full, Zoom, Wide-zoom, etc.)
`AKEYCODE_U`	'U' key.
`AKEYCODE_UNKNOWN`	Unknown key code.
`AKEYCODE_V`	'V' key.
`AKEYCODE_VIDEO_APP_1`	Video Application key #1.
`AKEYCODE_VIDEO_APP_2`	Video Application key #2.
`AKEYCODE_VIDEO_APP_3`	Video Application key #3.
`AKEYCODE_VIDEO_APP_4`	Video Application key #4.
`AKEYCODE_VIDEO_APP_5`	Video Application key #5.
`AKEYCODE_VIDEO_APP_6`	Video Application key #6.
`AKEYCODE_VIDEO_APP_7`	Video Application key #7.
`AKEYCODE_VIDEO_APP_8`	Video Application key #8.
`AKEYCODE_VOICE_ASSIST`	Voice Assist key. Launches the global voice assist activity. Not delivered to applications.
`AKEYCODE_VOLUME_DOWN`	Volume Down key. Adjusts the speaker volume down.
`AKEYCODE_VOLUME_MUTE`	Volume Mute key. Mutes the speaker, unlike AKEYCODE_MUTE. This key should normally be implemented as a toggle such that the first press mutes the speaker and the second press restores the original volume.
`AKEYCODE_VOLUME_UP`	Volume Up key. Adjusts the speaker volume up.
`AKEYCODE_W`	'W' key.
`AKEYCODE_WAKEUP`	Wakeup key. Wakes up the device. Behaves somewhat like AKEYCODE_POWER but it has no effect if the device is already awake.
`AKEYCODE_WINDOW`	Window key. On TV remotes, toggles picture-in-picture mode or other windowing functions.
`AKEYCODE_X`	'X' key.
`AKEYCODE_Y`	'Y' key.
`AKEYCODE_YEN`	Japanese Yen key.
`AKEYCODE_Z`	'Z' key.
`AKEYCODE_ZENKAKU_HANKAKU`	Japanese full-width / half-width key.
`AKEYCODE_ZOOM_IN`	Zoom in key.
`AKEYCODE_ZOOM_OUT`	Zoom out key.

AMotionClassification

Declared in android/input.h

 AMotionClassification

Constants that identify different gesture classification types.

Properties
`AMOTION_EVENT_CLASSIFICATION_AMBIGUOUS_GESTURE`	Classification constant: Ambiguous gesture. The user's intent with respect to the current event stream is not yet determined. Events starting in AMOTION_EVENT_CLASSIFICATION_AMBIGUOUS_GESTURE will eventually resolve into either AMOTION_EVENT_CLASSIFICATION_DEEP_PRESS or AMOTION_EVENT_CLASSIFICATION_NONE. Gestural actions, such as scrolling, should be inhibited until the classification resolves to another value or the event stream ends.
`AMOTION_EVENT_CLASSIFICATION_DEEP_PRESS`	Classification constant: Deep press. The current event stream represents the user intentionally pressing harder on the screen. This classification type should be used to accelerate the long press behaviour.
`AMOTION_EVENT_CLASSIFICATION_MULTI_FINGER_SWIPE`	Classification constant: multi-finger swipe. The current event stream represents the user swiping with three or more fingers on a touchpad. Unlike two-finger swipes, these are only to be handled by the system UI, which is why they have a separate constant from two-finger swipes.
`AMOTION_EVENT_CLASSIFICATION_NONE`	Classification constant: None. No additional information is available about the current motion event stream.
`AMOTION_EVENT_CLASSIFICATION_PINCH`	Classification constant: pinch. The current event stream represents the user pinching with two fingers on a touchpad. The gesture is centered around the current cursor position.
`AMOTION_EVENT_CLASSIFICATION_TWO_FINGER_SWIPE`	Classification constant: touchpad two-finger swipe. The current event stream represents the user swiping with two fingers on a touchpad.

Typedefs

AInputEvent

Declared in android/input.h

struct AInputEvent AInputEvent

Input events.

Input events are opaque structures. Use the provided accessors functions to read their properties.

AInputQueue

Declared in android/input.h

struct AInputQueue AInputQueue

Input queue.

An input queue is the facility through which you retrieve input events.

Functions

AInputEvent_getDeviceId

Declared in android/input.h

int32_t AInputEvent_getDeviceId(
  const AInputEvent *event
)

Get the id for the device that an input event came from.

Input events can be generated by multiple different input devices. Use the input device id to obtain information about the input device that was responsible for generating a particular event.

An input device id of 0 indicates that the event didn't come from a physical device; other numbers are arbitrary and you shouldn't depend on the values. Use the provided input device query API to obtain information about input devices.

AInputEvent_getSource

Declared in android/input.h

int32_t AInputEvent_getSource(
  const AInputEvent *event
)

Get the input event source.

AInputEvent_getType

Declared in android/input.h

int32_t AInputEvent_getType(
  const AInputEvent *event
)

Input event accessors.

Note that most functions can only be used on input events that are of a given type. Calling these functions on input events of other types will yield undefined behavior.Get the input event type.

AInputEvent_release

Declared in android/input.h

void AInputEvent_release(
  const AInputEvent *event
)

Releases interface objects created by AKeyEvent_fromJava() and AMotionEvent_fromJava().

After returning, the specified AInputEvent* object becomes invalid and should no longer be used. The underlying Java object remains valid and does not change its state.

Available since API level 31.

AInputEvent_toJava

Declared in android/input.h

jobject AInputEvent_toJava(
  JNIEnv *env,
  const AInputEvent *aInputEvent
)

Creates a java android.view.InputEvent object that is a copy of the specified native AInputEvent.

Specified AInputEvent is require to be a valid MotionEvent or KeyEvent object.

Available since API level 35.

AInputQueue_attachLooper

Declared in android/input.h

void AInputQueue_attachLooper(
  AInputQueue *queue,
  ALooper *looper,
  int ident,
  ALooper_callbackFunc callback,
  void *data
)

Add this input queue to a looper for processing.

See ALooper_addFd() for information on the ident, callback, and data params.

AInputQueue_detachLooper

Declared in android/input.h

void AInputQueue_detachLooper(
  AInputQueue *queue
)

Remove the input queue from the looper it is currently attached to.

AInputQueue_finishEvent

Declared in android/input.h

void AInputQueue_finishEvent(
  AInputQueue *queue,
  AInputEvent *event,
  int handled
)

Report that dispatching has finished with the given event.

This must be called after receiving an event with AInputQueue_getEvent().

AInputQueue_fromJava

Declared in android/input.h

AInputQueue * AInputQueue_fromJava(
  JNIEnv *env,
  jobject inputQueue
)

Returns the AInputQueue* object associated with the supplied Java InputQueue object.

The returned native object holds a weak reference to the Java object, and is only valid as long as the Java object has not yet been disposed. You should ensure that there is a strong reference to the Java object and that it has not been disposed before using the returned object.

Available since API level 33.

AInputQueue_getEvent

Declared in android/input.h

int32_t AInputQueue_getEvent(
  AInputQueue *queue,
  AInputEvent **outEvent
)

Returns the next available event from the queue.

Returns a negative value if no events are available or an error has occurred.

AInputQueue_hasEvents

Declared in android/input.h

int32_t AInputQueue_hasEvents(
  AInputQueue *queue
)

Returns true if there are one or more events available in the input queue.

Returns 1 if the queue has events; 0 if it does not have events; and a negative value if there is an error.

AInputQueue_preDispatchEvent

Declared in android/input.h

int32_t AInputQueue_preDispatchEvent(
  AInputQueue *queue,
  AInputEvent *event
)

Sends the key for standard pre-dispatching that is, possibly deliver it to the current IME to be consumed before the app.

Returns 0 if it was not pre-dispatched, meaning you can process it right now. If non-zero is returned, you must abandon the current event processing and allow the event to appear again in the event queue (if it does not get consumed during pre-dispatching).

AKeyEvent_fromJava

Declared in android/input.h

const AInputEvent * AKeyEvent_fromJava(
  JNIEnv *env,
  jobject keyEvent
)

Creates a native AInputEvent* object that is a copy of the specified Java android.view.KeyEvent.

The result may be used with generic and KeyEvent-specific AInputEvent_* functions. The object returned by this function must be disposed using AInputEvent_release().

Available since API level 31.

AKeyEvent_getAction

Declared in android/input.h

int32_t AKeyEvent_getAction(
  const AInputEvent *key_event
)

Get the key event action.

AKeyEvent_getDownTime

Declared in android/input.h

int64_t AKeyEvent_getDownTime(
  const AInputEvent *key_event
)

Get the time of the most recent key down event, in the java.lang.System.nanoTime() time base.

If this is a down event, this will be the same as eventTime. Note that when chording keys, this value is the down time of the most recently pressed key, which may not be the same physical key of this event.

AKeyEvent_getEventTime

Declared in android/input.h

int64_t AKeyEvent_getEventTime(
  const AInputEvent *key_event
)

Get the time this event occurred, in the java.lang.System.nanoTime() time base.

AKeyEvent_getFlags

Declared in android/input.h

int32_t AKeyEvent_getFlags(
  const AInputEvent *key_event
)

Get the key event flags.

AKeyEvent_getKeyCode

Declared in android/input.h

int32_t AKeyEvent_getKeyCode(
  const AInputEvent *key_event
)

Get the key code of the key event.

This is the physical key that was pressed, not the Unicode character.

AKeyEvent_getMetaState

Declared in android/input.h

int32_t AKeyEvent_getMetaState(
  const AInputEvent *key_event
)

Get the meta key state.

AKeyEvent_getRepeatCount

Declared in android/input.h

int32_t AKeyEvent_getRepeatCount(
  const AInputEvent *key_event
)

Get the repeat count of the event.

For both key up an key down events, this is the number of times the key has repeated with the first down starting at 0 and counting up from there. For multiple key events, this is the number of down/up pairs that have occurred.

AKeyEvent_getScanCode

Declared in android/input.h

int32_t AKeyEvent_getScanCode(
  const AInputEvent *key_event
)

Get the hardware key id of this key event.

These values are not reliable and vary from device to device.

AMotionEvent_fromJava

Declared in android/input.h

const AInputEvent * AMotionEvent_fromJava(
  JNIEnv *env,
  jobject motionEvent
)

Creates a native AInputEvent* object that is a copy of the specified Java android.view.MotionEvent.

The result may be used with generic and MotionEvent-specific AInputEvent_* functions. The object returned by this function must be disposed using AInputEvent_release().

Available since API level 31.

AMotionEvent_getAction

Declared in android/input.h

int32_t AMotionEvent_getAction(
  const AInputEvent *motion_event
)

Get the combined motion event action code and pointer index.

AMotionEvent_getActionButton

Declared in android/input.h

int32_t AMotionEvent_getActionButton(
  const AInputEvent *motion_event
)

Get the action button for the motion event.

Returns a valid action button when the event is associated with a button press or button release action. For other actions the return value is undefined.

See also:AMOTION_EVENT_BUTTON_PRIMARYSee also:AMOTION_EVENT_BUTTON_SECONDARYSee also:AMOTION_EVENT_BUTTON_TERTIARYSee also:AMOTION_EVENT_BUTTON_BACKSee also:AMOTION_EVENT_BUTTON_FORWARDSee also:#AMOTION_EVENT_BUTTON_STYLUS_PRIMARY See also:#AMOTION_EVENT_BUTTON_STYLUS_SECONDARY

AMotionEvent_getAxisValue

Declared in android/input.h

float AMotionEvent_getAxisValue(
  const AInputEvent *motion_event,
  int32_t axis,
  size_t pointer_index
)

Get the value of the request axis for the given pointer index.

AMotionEvent_getButtonState

Declared in android/input.h

int32_t AMotionEvent_getButtonState(
  const AInputEvent *motion_event
)

Get the button state of all buttons that are pressed.

AMotionEvent_getClassification

Declared in android/input.h

int32_t AMotionEvent_getClassification(
  const AInputEvent *motion_event
)

Returns the classification for the current gesture.

The classification may change as more events become available for the same gesture.

AMotionEvent_getDownTime

Declared in android/input.h

int64_t AMotionEvent_getDownTime(
  const AInputEvent *motion_event
)

Get the time when the user originally pressed down to start a stream of position events, in the java.lang.System.nanoTime() time base.

AMotionEvent_getEdgeFlags

Declared in android/input.h

int32_t AMotionEvent_getEdgeFlags(
  const AInputEvent *motion_event
)

Get a bitfield indicating which edges, if any, were touched by this motion event.

For touch events, clients can use this to determine if the user's finger was touching the edge of the display.

AMotionEvent_getEventTime

Declared in android/input.h

int64_t AMotionEvent_getEventTime(
  const AInputEvent *motion_event
)

Get the time when this specific event was generated, in the java.lang.System.nanoTime() time base.

AMotionEvent_getFlags

Declared in android/input.h

int32_t AMotionEvent_getFlags(
  const AInputEvent *motion_event
)

Get the motion event flags.

AMotionEvent_getHistoricalAxisValue

Declared in android/input.h

float AMotionEvent_getHistoricalAxisValue(
  const AInputEvent *motion_event,
  int32_t axis,
  size_t pointer_index,
  size_t history_index
)

Get the historical value of the request axis for the given pointer index that occurred between this event and the previous motion event.

AMotionEvent_getHistoricalEventTime

Declared in android/input.h

int64_t AMotionEvent_getHistoricalEventTime(
  const AInputEvent *motion_event,
  size_t history_index
)

Get the time that a historical movement occurred between this event and the previous event, in the java.lang.System.nanoTime() time base.

AMotionEvent_getHistoricalOrientation

Declared in android/input.h

float AMotionEvent_getHistoricalOrientation(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical orientation of the touch area and tool area in radians clockwise from vertical for the given pointer index that occurred between this event and the previous motion event.

An angle of 0 degrees indicates that the major axis of contact is oriented upwards, is perfectly circular or is of unknown orientation. A positive angle indicates that the major axis of contact is oriented to the right. A negative angle indicates that the major axis of contact is oriented to the left. The full range is from -PI/2 radians (finger pointing fully left) to PI/2 radians (finger pointing fully right).

AMotionEvent_getHistoricalPressure

Declared in android/input.h

float AMotionEvent_getHistoricalPressure(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical pressure of this event for the given pointer index that occurred between this event and the previous motion event.

The pressure generally ranges from 0 (no pressure at all) to 1 (normal pressure), although values higher than 1 may be generated depending on the calibration of the input device.

AMotionEvent_getHistoricalRawX

Declared in android/input.h

float AMotionEvent_getHistoricalRawX(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical raw X coordinate of this event for the given pointer index that occurred between this event and the previous motion event.

For touch events on the screen, this is the original location of the event on the screen, before it had been adjusted for the containing window and views. Whole numbers are pixels; the value may have a fraction for input devices that are sub-pixel precise.

AMotionEvent_getHistoricalRawY

Declared in android/input.h

float AMotionEvent_getHistoricalRawY(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical raw Y coordinate of this event for the given pointer index that occurred between this event and the previous motion event.

AMotionEvent_getHistoricalSize

Declared in android/input.h

float AMotionEvent_getHistoricalSize(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the current scaled value of the approximate size for the given pointer index that occurred between this event and the previous motion event.

This represents some approximation of the area of the screen being pressed; the actual value in pixels corresponding to the touch is normalized with the device specific range of values and scaled to a value between 0 and 1. The value of size can be used to determine fat touch events.

AMotionEvent_getHistoricalToolMajor

Declared in android/input.h

float AMotionEvent_getHistoricalToolMajor(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical length of the major axis of an ellipse that describes the size of the approaching tool for the given pointer index that occurred between this event and the previous motion event.

The tool area represents the estimated size of the finger or pen that is touching the device independent of its actual touch area at the point of contact.

AMotionEvent_getHistoricalToolMinor

Declared in android/input.h

float AMotionEvent_getHistoricalToolMinor(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical length of the minor axis of an ellipse that describes the size of the approaching tool for the given pointer index that occurred between this event and the previous motion event.

The tool area represents the estimated size of the finger or pen that is touching the device independent of its actual touch area at the point of contact.

AMotionEvent_getHistoricalTouchMajor

Declared in android/input.h

float AMotionEvent_getHistoricalTouchMajor(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical length of the major axis of an ellipse that describes the touch area at the point of contact for the given pointer index that occurred between this event and the previous motion event.

AMotionEvent_getHistoricalTouchMinor

Declared in android/input.h

float AMotionEvent_getHistoricalTouchMinor(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical length of the minor axis of an ellipse that describes the touch area at the point of contact for the given pointer index that occurred between this event and the previous motion event.

AMotionEvent_getHistoricalX

Declared in android/input.h

float AMotionEvent_getHistoricalX(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical X coordinate of this event for the given pointer index that occurred between this event and the previous motion event.

Whole numbers are pixels; the value may have a fraction for input devices that are sub-pixel precise.

AMotionEvent_getHistoricalY

Declared in android/input.h

float AMotionEvent_getHistoricalY(
  const AInputEvent *motion_event,
  size_t pointer_index,
  size_t history_index
)

Get the historical Y coordinate of this event for the given pointer index that occurred between this event and the previous motion event.

Whole numbers are pixels; the value may have a fraction for input devices that are sub-pixel precise.

AMotionEvent_getHistorySize

Declared in android/input.h

size_t AMotionEvent_getHistorySize(
  const AInputEvent *motion_event
)

Get the number of historical points in this event.

These are movements that have occurred between this event and the previous event. This only applies to AMOTION_EVENT_ACTION_MOVE events all other actions will have a size of 0. Historical samples are indexed from oldest to newest.

AMotionEvent_getMetaState

Declared in android/input.h

int32_t AMotionEvent_getMetaState(
  const AInputEvent *motion_event
)

Get the state of any meta / modifier keys that were in effect when the event was generated.

AMotionEvent_getOrientation

Declared in android/input.h

float AMotionEvent_getOrientation(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current orientation of the touch area and tool area in radians clockwise from vertical for the given pointer index.

AMotionEvent_getPointerCount

Declared in android/input.h

size_t AMotionEvent_getPointerCount(
  const AInputEvent *motion_event
)

Get the number of pointers of data contained in this event.

Always >= 1.

AMotionEvent_getPointerId

Declared in android/input.h

int32_t AMotionEvent_getPointerId(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the pointer identifier associated with a particular pointer data index in this event.

The identifier tells you the actual pointer number associated with the data, accounting for individual pointers going up and down since the start of the current gesture.

AMotionEvent_getPressure

Declared in android/input.h

float AMotionEvent_getPressure(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current pressure of this event for the given pointer index.

The pressure generally ranges from 0 (no pressure at all) to 1 (normal pressure), although values higher than 1 may be generated depending on the calibration of the input device.

AMotionEvent_getRawX

Declared in android/input.h

float AMotionEvent_getRawX(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the original raw X coordinate of this event.

For touch events on the screen, this is the original location of the event on the screen, before it had been adjusted for the containing window and views.

AMotionEvent_getRawY

Declared in android/input.h

float AMotionEvent_getRawY(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the original raw X coordinate of this event.

For touch events on the screen, this is the original location of the event on the screen, before it had been adjusted for the containing window and views.

AMotionEvent_getSize

Declared in android/input.h

float AMotionEvent_getSize(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current scaled value of the approximate size for the given pointer index.

AMotionEvent_getToolMajor

Declared in android/input.h

float AMotionEvent_getToolMajor(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current length of the major axis of an ellipse that describes the size of the approaching tool for the given pointer index.

The tool area represents the estimated size of the finger or pen that is touching the device independent of its actual touch area at the point of contact.

AMotionEvent_getToolMinor

Declared in android/input.h

float AMotionEvent_getToolMinor(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current length of the minor axis of an ellipse that describes the size of the approaching tool for the given pointer index.

The tool area represents the estimated size of the finger or pen that is touching the device independent of its actual touch area at the point of contact.

AMotionEvent_getToolType

Declared in android/input.h

int32_t AMotionEvent_getToolType(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the tool type of a pointer for the given pointer index.

The tool type indicates the type of tool used to make contact such as a finger or stylus, if known.

AMotionEvent_getTouchMajor

Declared in android/input.h

float AMotionEvent_getTouchMajor(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current length of the major axis of an ellipse that describes the touch area at the point of contact for the given pointer index.

AMotionEvent_getTouchMinor

Declared in android/input.h

float AMotionEvent_getTouchMinor(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current length of the minor axis of an ellipse that describes the touch area at the point of contact for the given pointer index.

AMotionEvent_getX

Declared in android/input.h

float AMotionEvent_getX(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current X coordinate of this event for the given pointer index.

Whole numbers are pixels; the value may have a fraction for input devices that are sub-pixel precise.

AMotionEvent_getXOffset

Declared in android/input.h

float AMotionEvent_getXOffset(
  const AInputEvent *motion_event
)

Get the X coordinate offset.

For touch events on the screen, this is the delta that was added to the raw screen coordinates to adjust for the absolute position of the containing windows and views.

AMotionEvent_getXPrecision

Declared in android/input.h

float AMotionEvent_getXPrecision(
  const AInputEvent *motion_event
)

Get the precision of the X coordinates being reported.

You can multiply this number with an X coordinate sample to find the actual hardware value of the X coordinate.

AMotionEvent_getY

Declared in android/input.h

float AMotionEvent_getY(
  const AInputEvent *motion_event,
  size_t pointer_index
)

Get the current Y coordinate of this event for the given pointer index.

Whole numbers are pixels; the value may have a fraction for input devices that are sub-pixel precise.

AMotionEvent_getYOffset

Declared in android/input.h

float AMotionEvent_getYOffset(
  const AInputEvent *motion_event
)

Get the Y coordinate offset.

For touch events on the screen, this is the delta that was added to the raw screen coordinates to adjust for the absolute position of the containing windows and views.

AMotionEvent_getYPrecision

Declared in android/input.h

float AMotionEvent_getYPrecision(
  const AInputEvent *motion_event
)

Get the precision of the Y coordinates being reported.

You can multiply this number with a Y coordinate sample to find the actual hardware value of the Y coordinate.