Save the date! Android Dev Summit is coming to Sunnyvale, CA on Oct 23-24, 2019.


The systrace command allows you to collect and inspect timing information across all processes running on your device at the system level. It combines data from the Android kernel, such as the CPU scheduler, disk activity, and app threads, to generate an HTML report, similar to what's shown in figure 1.

Figure 1. A sample systrace HTML report, which shows 5 seconds of interaction with an app. The report highlights frames that systrace believes may not have been rendered properly.

This report provides an overall picture of an Android device’s system processes for a given period of time. It also inspects the captured tracing information to highlight problems that it observes, such as UI jank while displaying motion or animation, and provides recommendations about how to fix them. However, systrace doesn't collect information about code execution within your app process. For more detailed information about which methods your app is executing and how much CPU resources it's using, use the Android Studio CPU profiler. You can also generate trace logs and import and inspect them using the CPU Profiler.

This document explains how to generate systrace reports from the command line, navigate the trace files produced by the tool, and use them to analyze and improve the performance of an application's user interface (UI).

In order to run systrace, complete the following steps:

The systrace tool is provided in the Android SDK Tools package and is located in android-sdk/platform-tools/systrace/.


To generate the HTML report for app, you need to run systrace from the command line using the following syntax:

python [options] [categories]

For example, the following command calls systrace to record device activity and generate a HTML report named mynewtrace.html. This list of categories is a reasonable default list for most devices.

$ python -o mynewtrace.html sched freq idle am wm gfx view \
    binder_driver hal dalvik camera input res

Tip: If you want to see the names of tasks in the trace output, you must include the sched category in your command parameters.

To view the list of categories that your connected device supports, run the following command:

$ python --list-categories

If you don't specify any categories or options, systrace generates a report that includes all available categories and uses default settings. The categories available depend on the connected device you're using.

Global options

Global options Description
-h | --help Show the help message.
-l | --list-categories Lists the tracing categories available to your connected device.

Commands and command options

Commands and options Description
-o file Write the HTML trace report to the specified file. If you don't specify this option, systrace saves your report to the same directory as and names it trace.html.
-t N | --time=N Trace device activity for N seconds. If you don't specify this option, systrace prompts you to end the trace by pressing the Enter key from the command line.
-b N | --buf-size=N Use a trace buffer size of N kilobytes. This option lets you limit the total size of the data collected during a trace.
-k functions
| --ktrace=functions
Trace the activity of specific kernel functions, specified in a comma-separated list.
-a app-name
| --app=app-name
Enable tracing for apps, specified as a comma-separated list of process names. The apps must contain tracing instrumentation calls from the Trace class. You should specify this option whenever you profile your app—many libraries, such as RecyclerView, include tracing instrumentation calls that provide useful information when you enable app-level tracing. For more information, go to the section about how to instrument your app code.
--from-file=file-path Create an interactive HTML report from a file, such as TXT files that include raw trace data, instead of running a live trace.
-e device-serial
| --serial=device-serial
Conduct the trace on a specific connected device, identified by its device serial number.
categories Include tracing information for the system processes you specify, such as gfx for system processes that render graphics. You can run systrace with the -l command to see a list of services available to your connected device.

Investigate UI performance problems

systrace is particularly useful for inspecting your app's UI performance because it can analyze your code and frame rate to identify problem areas and suggest possible solutions. To begin, proceed as follows:

  1. Run your app on a connected device.
  2. Run systrace with the following command:

    python -t 10 [other-options] [categories]

    This example traces your app for 10 seconds.

  3. Interact with your app while systrace continues running.

  4. After your defined time limit has elapsed, in this case 10 seconds, systrace generates an HTML report.

  5. Open the HTML report using a web browser.

By interacting with this report, you can inspect device CPU usage over the duration of the recording. For help navigating the HTML report, see the keyboard shortcuts section, or click the ? button in the top right corner of the report.

The section below explains how to inspect information in the report to find and fix UI performance problems.

Inspecting frames and alerts

As shown in figure 2, the report lists each process that renders UI frames and indicates each rendered frame along the timeline. Frames that render within the 16.6 millisecond required to maintain a stable 60 frames per second are indicated with green frame circles. Frames that take longer than 16.6 milliseconds to render are indicated with yellow or red frame circles.

Zoomed in view of a frame

Figure 2. Systrace display after zooming in on a long-running frame.

Clicking on a frame circle highlights it and provides additional information about the work done by the system to render that frame, including alerts. It also shows you the methods that the system was executing while rendering that frame, so you can investigate those methods for causes of UI jank.

Problematic frame selected

Figure 3. Selecting the problematic frame, an alert appears below the trace report identifying the problem.

After you select a slow frame, you may see an alert in the bottom pane of the report. The alert shown in figure 3 calls out that the primary problem with the frame is that too much time is spent inside ListView recycling and rebinding. There are links to the relevant events in the trace which explain more about what the system is doing during this time.

To see each alert that the tool discovered in your trace, and the number of times the device triggered each alert, click the Alerts tab at the far right of the window, as shown in figure 4. The Alerts panel helps you see which problems occur in the trace, and how often they contribute to jank. Think of the panel as a list of bugs to be fixed. Often, a tiny change or improvement in one area can eliminate an entire class of alerts from your app.

Alert tab shown

Figure 4. Clicking the Alert button to the right reveals the alert tab.

If you see too much work being done on the UI thread, you need to find out which methods are consuming too much CPU time. One approach is to add trace markers (see Instrument your app code) to methods that you think are causing these bottlenecks to see those function calls appear in systrace. If you are unsure which methods may be causing bottlenecks on the UI thread, use the Android Studio CPU profiler. You can generate trace logs and import and inspect them using the CPU Profiler.

HTML report keyboard shortcuts

The table below lists the keyboard shortcuts that are available while viewing a systrace HTML report.

Key Description
W Zoom into the trace timeline.
S Zoom out of the trace timeline.
A Pan left on the trace timeline.
D Pan right on the trace timeline.
E Center the trace timeline on the current mouse location.
G Show grid at the start of the currently selected task.
Shift + G Show grid at the end of the currently selected task.
Right Arrow Select the next event on the currently selected timeline.
Left Arrow Select the previous event on the currently selected timeline.

Instrument your app code

Because systrace shows you information about processes only at the system level, it's difficult to know what methods your app was executing at a given time in the HTML report. In Android 4.3 (API level 18) and higher, you can use the Trace class in your code to flag execution events in the HTML report. You don't need to instrument your code to record traces with systrace, but doing so helps you see what parts of your app's code may be contributing to hanging threads or UI jank. This approach is different from using the Debug class—the Trace class simply adds flags to a systrace report, while the Debug class helps you inspect detailed app CPU usage by generating .trace files.

To generate a systrace HTML report that includes your instrumented trace events, you need to run systrace with the -a or --app command line option and specify the package name of your app.

The following code example shows you how to use the Trace class to flag the execution of a method, including two nested code blocks within that method:


class MyAdapter : RecyclerView.Adapter<MyViewHolder>() {
    override fun onCreateViewHolder(parent: ViewGroup, viewType: Int): MyViewHolder {
        return try {
        } finally {
            // In 'try...catch' statements, always call endSection()
            // in a 'finally' block to ensure it is invoked even when an exception
            // is thrown.

    override fun onBindViewHolder(holder: MyViewHolder, position: Int) {
        try {
            try {
                val rowItem = queryDatabase(position)
            } finally {
        } finally {


public class MyAdapter extends RecyclerView.Adapter<MyViewHolder> {
    public MyViewHolder onCreateViewHolder(ViewGroup parent, int viewType) {
        MyViewHolder myViewHolder;
        try {
            myViewHolder = MyViewHolder.newInstance(parent);
        } finally {
            // In 'try...catch' statements, always call endSection()
            // in a 'finally' block to ensure it is invoked even when an exception
            // is thrown.
        return myViewHolder;

    public void onBindViewHolder(MyViewHolder holder, int position) {
        try {
            try {
                RowItem rowItem = queryDatabase(position);
            } finally {
        } finally {