Android Interface Definition Language (AIDL)

A Linguagem de definição de interface do Android (AIDL) é semelhante a outras IDLs: ela permite definir a interface de programação que o cliente e o serviço concordam para se comunicar usando comunicação interprocesso (IPC).

No Android, um processo normalmente não pode acessar a memória de outro. Para se comunicarem, eles precisam decompor os objetos em primitivos que o sistema operacional possa entender e organizar os objetos em todo esse limite para você. O código para fazer essa associação é tedioso de escrever. Por isso, o Android o processa para você com o AIDL.

Observação:o AIDL só é necessário se você permitir que clientes de aplicativos diferentes acessem seu serviço para IPC e se quiser processar várias linhas de execução no serviço. Se você não precisar executar o IPC simultâneo em diferentes aplicativos, crie sua interface implementando um Binder. Se você quiser executar o IPC, mas não precisa processar várias linhas de execução, implemente a interface usando um Messenger. De qualquer forma, entenda os serviços vinculados antes de implementar um AIDL.

Antes de começar a projetar sua interface AIDL, saiba que as chamadas para uma interface AIDL são chamadas de função direta. Não faça suposições sobre a linha de execução em que a chamada ocorre. O que acontece é diferente dependendo se a chamada é de uma linha de execução no processo local ou remoto:

  • As chamadas feitas pelo processo local são executadas na mesma linha de execução que está fazendo a chamada. Se essa for a linha de execução de interface principal, ela continuará sendo executada na interface AIDL. Se for outra linha de execução, ela será a que executa o código no serviço. Assim, se apenas linhas de execução locais estiverem acessando o serviço, você poderá controlar completamente quais linhas de execução estão sendo executadas nele. No entanto, se esse for o caso, não use o AIDL. Em vez disso, crie a interface implementando um Binder.
  • As chamadas de um processo remoto são enviadas de um pool de linhas de execução que a plataforma mantém no seu próprio processo. Esteja preparado para chamadas recebidas de linhas de execução desconhecidas, com várias chamadas ocorrendo ao mesmo tempo. Em outras palavras, uma implementação de uma interface AIDL precisa ser completamente threadsafe. As chamadas feitas de uma linha de execução no mesmo objeto remoto chegam na ordem no receptor.
  • A palavra-chave oneway modifica o comportamento das chamadas remotas. Quando é usado, uma chamada remota não é bloqueada. Ele envia os dados da transação e retorna imediatamente. A implementação da interface recebe isso como uma chamada normal do pool de linhas de execução Binder como uma chamada remota normal. Se oneway for usado com uma chamada local, não haverá impacto e a chamada ainda será síncrona.

Definição de uma interface AIDL

Defina a interface AIDL em um arquivo .aidl usando a sintaxe da linguagem de programação Java e salve-o no código-fonte, no diretório src/, do aplicativo que hospeda o serviço e de qualquer outro aplicativo vinculado ao serviço.

Quando você cria cada aplicativo que contém o arquivo .aidl, as ferramentas do SDK do Android geram uma interface IBinder com base no arquivo .aidl e a salvam no diretório gen/ do projeto. O serviço precisa implementar a interface IBinder conforme apropriado. Os aplicativos cliente podem se vincular ao serviço e chamar métodos do IBinder para executar o IPC.

Para criar um serviço delimitado usando AIDL, siga estas etapas, descritas nas seções a seguir:

  1. Criar o arquivo .aidl

    Esse arquivo define a interface de programação com assinaturas de método.

  2. Implementar a interface

    As ferramentas do SDK do Android geram uma interface na linguagem de programação Java com base no arquivo .aidl. Essa interface tem uma classe abstrata interna chamada Stub, que estende Binder e implementa métodos da interface AIDL. É necessário ampliar a classe Stub e implementar os métodos.

  3. Exposiça a interface para os clientes

    Implemente um Service e substitua onBind() para retornar a implementação da classe Stub.

Atenção:todas as mudanças feitas na interface AIDL após a primeira versão precisam permanecer compatíveis com versões anteriores para evitar a interrupção de outros aplicativos que usam seu serviço. Ou seja, como o arquivo .aidl precisa ser copiado para outros aplicativos para que eles possam acessar a interface do serviço, é necessário manter o suporte à interface original.

Criação do arquivo .aidl

O AIDL usa uma sintaxe simples que permite declarar uma interface com um ou mais métodos que podem receber parâmetros e retornar valores. Os parâmetros e os valores de retorno podem ser de qualquer tipo, até mesmo outras interfaces geradas pelo AIDL.

Você precisa criar o arquivo .aidl usando a linguagem de programação Java. Cada arquivo .aidl precisa definir uma única interface e requer apenas a declaração de interface e as assinaturas de método.

Por padrão, a AIDL suporta os seguintes tipos de dados:

  • Todos os tipos primitivos, com exceção de short, na linguagem de programação Java (como int, long,char, boolean e assim por diante)
  • Matrizes de qualquer tipo, como int[] ou MyParcelable[]
  • String
  • CharSequence
  • List

    Todos os elementos no List precisam ser um dos tipos de dados aceitos nesta lista ou uma das outras interfaces ou parceláveis gerados por AIDL que você declarar. Um List pode ser usado como uma classe de tipo parametrizada, como List<String>. A classe concreta real que o outro lado recebe é sempre uma ArrayList, embora o método seja gerado para usar a interface List.

  • Map

    Todos os elementos no Map precisam ser um dos tipos de dados aceitos nesta lista ou uma das outras interfaces ou parceláveis gerados por AIDL que você declarar. Mapas de tipo parametrizados, como os do formulário Map<String,Integer>, não são aceitos. A classe concreta real que o outro lado recebe é sempre um HashMap, embora o método seja gerado para usar a interface Map. Considere usar um Bundle como alternativa ao Map.

É necessário incluir uma instrução import para cada tipo adicional não listado anteriormente, mesmo que eles sejam definidos no mesmo pacote da interface.

Ao definir a interface de serviço, tenha ciência do seguinte:

  • Os métodos podem ter zero ou mais parâmetros e retornar um valor ou void.
  • Todos os parâmetros não primitivos exigem uma tag direcional indicando para onde os dados vão: in, out ou inout (confira o exemplo abaixo).

    As interfaces primitivas, String, IBinder e geradas pelo AIDL são in por padrão e não podem ser de outro tipo.

    Atenção:limite a direção ao que realmente é necessário, porque o marshalling de parâmetros é caro.

  • Todos os comentários de código incluídos no arquivo .aidl são incluídos na interface IBinder gerada, exceto comentários antes das instruções de importação e pacote.
  • As constantes de string e int podem ser definidas na interface da AIDL, como const int VERSION = 1;.
  • As chamadas de método são enviadas por um código transact(), que normalmente é baseado em um índice de método na interface. Como isso dificulta o controle de versões, é possível atribuir manualmente o código da transação a um método: void method() = 10;.
  • Os argumentos e tipos de retorno nulos precisam ser anotados usando @nullable.

Confira um exemplo de arquivo .aidl:

// IRemoteService.aidl
package com.example.android;

// Declare any non-default types here with import statements.

/** Example service interface */
interface IRemoteService {
    /** Request the process ID of this service. */
    int getPid();

    /** Demonstrates some basic types that you can use as parameters
     * and return values in AIDL.
     */
    void basicTypes(int anInt, long aLong, boolean aBoolean, float aFloat,
            double aDouble, String aString);
}

Salve o arquivo .aidl no diretório src/ do projeto. Ao criar o aplicativo, as ferramentas do SDK geram o arquivo de interface IBinder no diretório gen/ do projeto. O nome do arquivo gerado corresponde ao nome do arquivo .aidl, mas com uma extensão .java. Por exemplo, IRemoteService.aidl resulta em IRemoteService.java.

Se você usar o Android Studio, a compilação incremental gerará a classe binder quase imediatamente. Se você não usa o Android Studio, a ferramenta Gradle gera a classe de vinculação na próxima vez que você cria o aplicativo. Crie seu projeto com gradle assembleDebug ou gradle assembleRelease assim que terminar de escrever o arquivo .aidl, para que o código possa ser vinculado à classe gerada.

Implementação da interface

Ao criar seu aplicativo, as ferramentas do SDK do Android geram um arquivo de interface .java com o nome do arquivo .aidl. A interface gerada inclui uma subclasse chamada Stub, que é uma implementação abstrata da interface pai, como YourInterface.Stub, e declara todos os métodos do arquivo .aidl.

Observação:Stub também define alguns métodos auxiliares, principalmente asInterface(), que recebe um IBinder, geralmente o transmitido para o método de callback onServiceConnected() de um cliente, e retorna uma instância da interface stub. Para mais detalhes sobre como fazer esse envio, consulte a seção Como chamar um método IPC.

Para implementar a interface gerada pelo .aidl, estenda a interface Binder gerada, como YourInterface.Stub, e implemente os métodos herdados do arquivo .aidl.

Confira um exemplo de implementação de uma interface chamada IRemoteService, definida pelo exemplo IRemoteService.aidl anterior, usando uma instância anônima:

Kotlin

private val binder = object : IRemoteService.Stub() {

    override fun getPid(): Int =
            Process.myPid()

    override fun basicTypes(
            anInt: Int,
            aLong: Long,
            aBoolean: Boolean,
            aFloat: Float,
            aDouble: Double,
            aString: String
    ) {
        // Does nothing.
    }
}

Java

private final IRemoteService.Stub binder = new IRemoteService.Stub() {
    public int getPid(){
        return Process.myPid();
    }
    public void basicTypes(int anInt, long aLong, boolean aBoolean,
        float aFloat, double aDouble, String aString) {
        // Does nothing.
    }
};

Agora, o binder é uma instância da classe Stub (um Binder), que define a interface IPC do serviço. Na próxima etapa, essa instância é exposta aos clientes para que eles possam interagir com o serviço.

Observe algumas regras ao implementar sua interface AIDL:

  • Não há garantia de que as chamadas recebidas sejam executadas na linha de execução principal. Portanto, pense em linhas de execução múltiplas desde o início e crie seu serviço de maneira adequada para que ele seja seguro para linhas de execução.
  • Por padrão, as chamadas de IPC são síncronas. Se você souber que o serviço leva mais de alguns milissegundos para concluir uma solicitação, não o chame da linha de execução principal da atividade. Isso pode travar o aplicativo, fazendo com que o Android mostre uma caixa de diálogo "O app não está respondendo". Chame-o de uma linha de execução separada no cliente.
  • Somente os tipos de exceção listados na documentação de referência de Parcel.writeException() são enviados de volta para o autor da chamada.

Exposição da interface aos clientes

Depois de implementar a interface do serviço, você precisa expô-la para os clientes se vincularem a ela. Para expor a interface do serviço, estenda Service e implemente onBind() para retornar uma instância da classe que implementa o Stub gerado, conforme discutido na seção anterior. Confira um exemplo de serviço que expõe a interface de exemplo IRemoteService aos clientes.

Kotlin

class RemoteService : Service() {

    override fun onCreate() {
        super.onCreate()
    }

    override fun onBind(intent: Intent): IBinder {
        // Return the interface.
        return binder
    }


    private val binder = object : IRemoteService.Stub() {
        override fun getPid(): Int {
            return Process.myPid()
        }

        override fun basicTypes(
                anInt: Int,
                aLong: Long,
                aBoolean: Boolean,
                aFloat: Float,
                aDouble: Double,
                aString: String
        ) {
            // Does nothing.
        }
    }
}

Java

public class RemoteService extends Service {
    @Override
    public void onCreate() {
        super.onCreate();
    }

    @Override
    public IBinder onBind(Intent intent) {
        // Return the interface.
        return binder;
    }

    private final IRemoteService.Stub binder = new IRemoteService.Stub() {
        public int getPid(){
            return Process.myPid();
        }
        public void basicTypes(int anInt, long aLong, boolean aBoolean,
            float aFloat, double aDouble, String aString) {
            // Does nothing.
        }
    };
}

Agora, quando um cliente, como uma atividade, chama bindService() para se conectar a esse serviço, o callback onServiceConnected() do cliente recebe a instância binder retornada pelo método onBind() do serviço.

O cliente também precisa ter acesso à classe de interface. Portanto, se o cliente e o serviço estiverem em aplicativos separados, o aplicativo do cliente precisará ter uma cópia do arquivo .aidl no diretório src/, que gera a interface android.os.Binder, oferecendo ao cliente acesso aos métodos AIDL.

Quando o cliente recebe o IBinder no callback onServiceConnected(), ele precisa chamar YourServiceInterface.Stub.asInterface(service) para transmitir o parâmetro retornado ao tipo YourServiceInterface:

Kotlin

var iRemoteService: IRemoteService? = null

val mConnection = object : ServiceConnection {

    // Called when the connection with the service is established.
    override fun onServiceConnected(className: ComponentName, service: IBinder) {
        // Following the preceding example for an AIDL interface,
        // this gets an instance of the IRemoteInterface, which we can use to call on the service.
        iRemoteService = IRemoteService.Stub.asInterface(service)
    }

    // Called when the connection with the service disconnects unexpectedly.
    override fun onServiceDisconnected(className: ComponentName) {
        Log.e(TAG, "Service has unexpectedly disconnected")
        iRemoteService = null
    }
}

Java

IRemoteService iRemoteService;
private ServiceConnection mConnection = new ServiceConnection() {
    // Called when the connection with the service is established.
    public void onServiceConnected(ComponentName className, IBinder service) {
        // Following the preceding example for an AIDL interface,
        // this gets an instance of the IRemoteInterface, which we can use to call on the service.
        iRemoteService = IRemoteService.Stub.asInterface(service);
    }

    // Called when the connection with the service disconnects unexpectedly.
    public void onServiceDisconnected(ComponentName className) {
        Log.e(TAG, "Service has unexpectedly disconnected");
        iRemoteService = null;
    }
};

Para conferir mais exemplos de código, consulte a classe RemoteService.java em ApiDemos.

Passagem de objetos via IPC

No Android 10 (nível 29 da API ou mais recente), é possível definir objetos Parcelable diretamente no AIDL. Os tipos que têm suporte como argumentos de interface AIDL e outros parceláveis também têm suporte aqui. Isso evita o trabalho extra de escrever manualmente o código de marshalling e uma classe personalizada. No entanto, isso também cria uma estrutura simples. Se quiser usar acessórios personalizados ou outras funcionalidades, implemente Parcelable.

package android.graphics;

// Declare Rect so AIDL can find it and knows that it implements
// the parcelable protocol.
parcelable Rect {
    int left;
    int top;
    int right;
    int bottom;
}

O exemplo de código anterior gera automaticamente uma classe Java com campos inteiros left, top, right e bottom. Todo o código de marshalling relevante é implementado automaticamente, e o objeto pode ser usado diretamente sem precisar adicionar nenhuma implementação.

Também é possível enviar uma classe personalizada de um processo para outro usando uma interface IPC. No entanto, verifique se o código da sua classe está disponível para o outro lado do canal IPC e se a classe oferece suporte à interface Parcelable. O suporte a Parcelable é importante porque permite que o sistema Android decomponha objetos em primitivos que podem ser agrupados em vários processos.

Para criar uma classe personalizada compatível com Parcelable, faça o seguinte:

  1. Faça com que a classe implemente a interface Parcelable.
  2. Implemente writeToParcel, que recebe o estado atual do objeto e o grava em um Parcel.
  3. Adicione um campo estático chamado CREATOR à sua classe, que é um objeto que implementa a interface Parcelable.Creator.
  4. Por fim, crie um arquivo .aidl que declare sua classe parcelável, conforme mostrado no arquivo Rect.aidl abaixo.

    Se você estiver usando um processo de build personalizado, não adicione o arquivo .aidl ao build. Semelhante a um arquivo de cabeçalho na linguagem C, este arquivo .aidl não é compilado.

O AIDL usa esses métodos e campos no código que ele gera para organizar e desorganizar seus objetos.

Por exemplo, aqui está um arquivo Rect.aidl para criar uma classe Rect que é parcializável:

package android.graphics;

// Declare Rect so AIDL can find it and knows that it implements
// the parcelable protocol.
parcelable Rect;

Confira um exemplo de como a classe Rect implementa o protocolo Parcelable.

Kotlin

import android.os.Parcel
import android.os.Parcelable

class Rect() : Parcelable {
    var left: Int = 0
    var top: Int = 0
    var right: Int = 0
    var bottom: Int = 0

    companion object CREATOR : Parcelable.Creator<Rect> {
        override fun createFromParcel(parcel: Parcel): Rect {
            return Rect(parcel)
        }

        override fun newArray(size: Int): Array<Rect?> {
            return Array(size) { null }
        }
    }

    private constructor(inParcel: Parcel) : this() {
        readFromParcel(inParcel)
    }

    override fun writeToParcel(outParcel: Parcel, flags: Int) {
        outParcel.writeInt(left)
        outParcel.writeInt(top)
        outParcel.writeInt(right)
        outParcel.writeInt(bottom)
    }

    private fun readFromParcel(inParcel: Parcel) {
        left = inParcel.readInt()
        top = inParcel.readInt()
        right = inParcel.readInt()
        bottom = inParcel.readInt()
    }

    override fun describeContents(): Int {
        return 0
    }
}

Java

import android.os.Parcel;
import android.os.Parcelable;

public final class Rect implements Parcelable {
    public int left;
    public int top;
    public int right;
    public int bottom;

    public static final Parcelable.Creator<Rect> CREATOR = new Parcelable.Creator<Rect>() {
        public Rect createFromParcel(Parcel in) {
            return new Rect(in);
        }

        public Rect[] newArray(int size) {
            return new Rect[size];
        }
    };

    public Rect() {
    }

    private Rect(Parcel in) {
        readFromParcel(in);
    }

    public void writeToParcel(Parcel out, int flags) {
        out.writeInt(left);
        out.writeInt(top);
        out.writeInt(right);
        out.writeInt(bottom);
    }

    public void readFromParcel(Parcel in) {
        left = in.readInt();
        top = in.readInt();
        right = in.readInt();
        bottom = in.readInt();
    }

    public int describeContents() {
        return 0;
    }
}

O marshalling na classe Rect é simples. Confira os outros métodos em Parcel para ver os outros tipos de valores que podem ser gravados em um Parcel.

Aviso:lembre-se das implicações de segurança de receber dados de outros processos. Nesse caso, o Rect lê quatro números do Parcel, mas cabe a você garantir que eles estejam dentro do intervalo de valores aceitável para o que o autor da chamada está tentando fazer. Para mais informações sobre como proteger seu aplicativo contra malware, consulte Dicas de segurança.

Métodos com argumentos Bundle contendo Parcelables

Se um método aceitar um objeto Bundle que deve conter parceláveis, defina o classloader do Bundle chamando Bundle.setClassLoader(ClassLoader) antes de tentar ler o Bundle. Caso contrário, você vai encontrar ClassNotFoundException, mesmo que o parcelável esteja definido corretamente no aplicativo.

Por exemplo, considere o seguinte arquivo .aidl de exemplo:

// IRectInsideBundle.aidl
package com.example.android;

/** Example service interface */
interface IRectInsideBundle {
    /** Rect parcelable is stored in the bundle with key "rect". */
    void saveRect(in Bundle bundle);
}
Como mostrado na implementação abaixo, o ClassLoader é definido explicitamente no Bundle antes de ler Rect:

Kotlin

private val binder = object : IRectInsideBundle.Stub() {
    override fun saveRect(bundle: Bundle) {
      bundle.classLoader = classLoader
      val rect = bundle.getParcelable<Rect>("rect")
      process(rect) // Do more with the parcelable.
    }
}

Java

private final IRectInsideBundle.Stub binder = new IRectInsideBundle.Stub() {
    public void saveRect(Bundle bundle){
        bundle.setClassLoader(getClass().getClassLoader());
        Rect rect = bundle.getParcelable("rect");
        process(rect); // Do more with the parcelable.
    }
};

Chamada de um método IPC

Para chamar uma interface remota definida com AIDL, siga estas etapas na classe de chamada:

  1. Inclua o arquivo .aidl no diretório src/ do projeto.
  2. Declare uma instância da interface IBinder, que é gerada com base no AIDL.
  3. Implemente ServiceConnection.
  4. Chame Context.bindService(), transmitindo a implementação ServiceConnection.
  5. Na implementação de onServiceConnected(), você recebe uma instância IBinder, chamada service. Chame YourInterfaceName.Stub.asInterface((IBinder)service) para transmitir o parâmetro retornado ao tipo YourInterface.
  6. Chame os métodos que definiu em sua interface. Sempre capture exceções DeadObjectException, que são geradas quando a conexão é interrompida. Além disso, capture exceções SecurityException, que são geradas quando os dois processos envolvidos na chamada de método IPC têm definições de AIDL conflitantes.
  7. Para desconectar, chame Context.unbindService() com a instância da sua interface.

Considere estes pontos ao chamar um serviço de IPC:

  • Objetos são referências contadas entre processos.
  • É possível enviar objetos anônimos como argumentos de método.

Para mais informações sobre a vinculação a um serviço, leia a Visão geral dos serviços vinculados.

Confira um exemplo de código que demonstra como chamar um serviço criado pelo AIDL, extraído do exemplo de serviço remoto no projeto ApiDemos.

Kotlin

private const val BUMP_MSG = 1

class Binding : Activity() {

    /** The primary interface you call on the service.  */
    private var mService: IRemoteService? = null

    /** Another interface you use on the service.  */
    internal var secondaryService: ISecondary? = null

    private lateinit var killButton: Button
    private lateinit var callbackText: TextView
    private lateinit var handler: InternalHandler

    private var isBound: Boolean = false

    /**
     * Class for interacting with the main interface of the service.
     */
    private val mConnection = object : ServiceConnection {

        override fun onServiceConnected(className: ComponentName, service: IBinder) {
            // This is called when the connection with the service is
            // established, giving us the service object we can use to
            // interact with the service.  We are communicating with our
            // service through an IDL interface, so get a client-side
            // representation of that from the raw service object.
            mService = IRemoteService.Stub.asInterface(service)
            killButton.isEnabled = true
            callbackText.text = "Attached."

            // We want to monitor the service for as long as we are
            // connected to it.
            try {
                mService?.registerCallback(mCallback)
            } catch (e: RemoteException) {
                // In this case, the service crashes before we can
                // do anything with it. We can count on soon being
                // disconnected (and then reconnected if it can be restarted)
                // so there is no need to do anything here.
            }

            // As part of the sample, tell the user what happened.
            Toast.makeText(
                    this@Binding,
                    R.string.remote_service_connected,
                    Toast.LENGTH_SHORT
            ).show()
        }

        override fun onServiceDisconnected(className: ComponentName) {
            // This is called when the connection with the service is
            // unexpectedly disconnected&mdash;that is, its process crashed.
            mService = null
            killButton.isEnabled = false
            callbackText.text = "Disconnected."

            // As part of the sample, tell the user what happened.
            Toast.makeText(
                    this@Binding,
                    R.string.remote_service_disconnected,
                    Toast.LENGTH_SHORT
            ).show()
        }
    }

    /**
     * Class for interacting with the secondary interface of the service.
     */
    private val secondaryConnection = object : ServiceConnection {

        override fun onServiceConnected(className: ComponentName, service: IBinder) {
            // Connecting to a secondary interface is the same as any
            // other interface.
            secondaryService = ISecondary.Stub.asInterface(service)
            killButton.isEnabled = true
        }

        override fun onServiceDisconnected(className: ComponentName) {
            secondaryService = null
            killButton.isEnabled = false
        }
    }

    private val mBindListener = View.OnClickListener {
        // Establish a couple connections with the service, binding
        // by interface names. This lets other applications be
        // installed that replace the remote service by implementing
        // the same interface.
        val intent = Intent(this@Binding, RemoteService::class.java)
        intent.action = IRemoteService::class.java.name
        bindService(intent, mConnection, Context.BIND_AUTO_CREATE)
        intent.action = ISecondary::class.java.name
        bindService(intent, secondaryConnection, Context.BIND_AUTO_CREATE)
        isBound = true
        callbackText.text = "Binding."
    }

    private val unbindListener = View.OnClickListener {
        if (isBound) {
            // If we have received the service, and hence registered with
            // it, then now is the time to unregister.
            try {
                mService?.unregisterCallback(mCallback)
            } catch (e: RemoteException) {
                // There is nothing special we need to do if the service
                // crashes.
            }

            // Detach our existing connection.
            unbindService(mConnection)
            unbindService(secondaryConnection)
            killButton.isEnabled = false
            isBound = false
            callbackText.text = "Unbinding."
        }
    }

    private val killListener = View.OnClickListener {
        // To kill the process hosting the service, we need to know its
        // PID.  Conveniently, the service has a call that returns
        // that information.
        try {
            secondaryService?.pid?.also { pid ->
                // Note that, though this API lets us request to
                // kill any process based on its PID, the kernel
                // still imposes standard restrictions on which PIDs you
                // can actually kill. Typically this means only
                // the process running your application and any additional
                // processes created by that app, as shown here. Packages
                // sharing a common UID are also able to kill each
                // other's processes.
                Process.killProcess(pid)
                callbackText.text = "Killed service process."
            }
        } catch (ex: RemoteException) {
            // Recover gracefully from the process hosting the
            // server dying.
            // For purposes of this sample, put up a notification.
            Toast.makeText(this@Binding, R.string.remote_call_failed, Toast.LENGTH_SHORT).show()
        }
    }

    // ----------------------------------------------------------------------
    // Code showing how to deal with callbacks.
    // ----------------------------------------------------------------------

    /**
     * This implementation is used to receive callbacks from the remote
     * service.
     */
    private val mCallback = object : IRemoteServiceCallback.Stub() {
        /**
         * This is called by the remote service regularly to tell us about
         * new values.  Note that IPC calls are dispatched through a thread
         * pool running in each process, so the code executing here is
         * NOT running in our main thread like most other things. So,
         * to update the UI, we need to use a Handler to hop over there.
         */
        override fun valueChanged(value: Int) {
            handler.sendMessage(handler.obtainMessage(BUMP_MSG, value, 0))
        }
    }

    /**
     * Standard initialization of this activity.  Set up the UI, then wait
     * for the user to interact with it before doing anything.
     */
    override fun onCreate(savedInstanceState: Bundle?) {
        super.onCreate(savedInstanceState)

        setContentView(R.layout.remote_service_binding)

        // Watch for button taps.
        var button: Button = findViewById(R.id.bind)
        button.setOnClickListener(mBindListener)
        button = findViewById(R.id.unbind)
        button.setOnClickListener(unbindListener)
        killButton = findViewById(R.id.kill)
        killButton.setOnClickListener(killListener)
        killButton.isEnabled = false

        callbackText = findViewById(R.id.callback)
        callbackText.text = "Not attached."
        handler = InternalHandler(callbackText)
    }

    private class InternalHandler(
            textView: TextView,
            private val weakTextView: WeakReference<TextView> = WeakReference(textView)
    ) : Handler() {
        override fun handleMessage(msg: Message) {
            when (msg.what) {
                BUMP_MSG -> weakTextView.get()?.text = "Received from service: ${msg.arg1}"
                else -> super.handleMessage(msg)
            }
        }
    }
}

Java

public static class Binding extends Activity {
    /** The primary interface we are calling on the service. */
    IRemoteService mService = null;
    /** Another interface we use on the service. */
    ISecondary secondaryService = null;

    Button killButton;
    TextView callbackText;

    private InternalHandler handler;
    private boolean isBound;

    /**
     * Standard initialization of this activity. Set up the UI, then wait
     * for the user to interact with it before doing anything.
     */
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);

        setContentView(R.layout.remote_service_binding);

        // Watch for button taps.
        Button button = (Button)findViewById(R.id.bind);
        button.setOnClickListener(mBindListener);
        button = (Button)findViewById(R.id.unbind);
        button.setOnClickListener(unbindListener);
        killButton = (Button)findViewById(R.id.kill);
        killButton.setOnClickListener(killListener);
        killButton.setEnabled(false);

        callbackText = (TextView)findViewById(R.id.callback);
        callbackText.setText("Not attached.");
        handler = new InternalHandler(callbackText);
    }

    /**
     * Class for interacting with the main interface of the service.
     */
    private ServiceConnection mConnection = new ServiceConnection() {
        public void onServiceConnected(ComponentName className,
                IBinder service) {
            // This is called when the connection with the service is
            // established, giving us the service object we can use to
            // interact with the service.  We are communicating with our
            // service through an IDL interface, so get a client-side
            // representation of that from the raw service object.
            mService = IRemoteService.Stub.asInterface(service);
            killButton.setEnabled(true);
            callbackText.setText("Attached.");

            // We want to monitor the service for as long as we are
            // connected to it.
            try {
                mService.registerCallback(mCallback);
            } catch (RemoteException e) {
                // In this case the service crashes before we can even
                // do anything with it. We can count on soon being
                // disconnected (and then reconnected if it can be restarted)
                // so there is no need to do anything here.
            }

            // As part of the sample, tell the user what happened.
            Toast.makeText(Binding.this, R.string.remote_service_connected,
                    Toast.LENGTH_SHORT).show();
        }

        public void onServiceDisconnected(ComponentName className) {
            // This is called when the connection with the service is
            // unexpectedly disconnected&mdash;that is, its process crashed.
            mService = null;
            killButton.setEnabled(false);
            callbackText.setText("Disconnected.");

            // As part of the sample, tell the user what happened.
            Toast.makeText(Binding.this, R.string.remote_service_disconnected,
                    Toast.LENGTH_SHORT).show();
        }
    };

    /**
     * Class for interacting with the secondary interface of the service.
     */
    private ServiceConnection secondaryConnection = new ServiceConnection() {
        public void onServiceConnected(ComponentName className,
                IBinder service) {
            // Connecting to a secondary interface is the same as any
            // other interface.
            secondaryService = ISecondary.Stub.asInterface(service);
            killButton.setEnabled(true);
        }

        public void onServiceDisconnected(ComponentName className) {
            secondaryService = null;
            killButton.setEnabled(false);
        }
    };

    private OnClickListener mBindListener = new OnClickListener() {
        public void onClick(View v) {
            // Establish a couple connections with the service, binding
            // by interface names. This lets other applications be
            // installed that replace the remote service by implementing
            // the same interface.
            Intent intent = new Intent(Binding.this, RemoteService.class);
            intent.setAction(IRemoteService.class.getName());
            bindService(intent, mConnection, Context.BIND_AUTO_CREATE);
            intent.setAction(ISecondary.class.getName());
            bindService(intent, secondaryConnection, Context.BIND_AUTO_CREATE);
            isBound = true;
            callbackText.setText("Binding.");
        }
    };

    private OnClickListener unbindListener = new OnClickListener() {
        public void onClick(View v) {
            if (isBound) {
                // If we have received the service, and hence registered with
                // it, then now is the time to unregister.
                if (mService != null) {
                    try {
                        mService.unregisterCallback(mCallback);
                    } catch (RemoteException e) {
                        // There is nothing special we need to do if the service
                        // crashes.
                    }
                }

                // Detach our existing connection.
                unbindService(mConnection);
                unbindService(secondaryConnection);
                killButton.setEnabled(false);
                isBound = false;
                callbackText.setText("Unbinding.");
            }
        }
    };

    private OnClickListener killListener = new OnClickListener() {
        public void onClick(View v) {
            // To kill the process hosting our service, we need to know its
            // PID.  Conveniently, our service has a call that returns
            // that information.
            if (secondaryService != null) {
                try {
                    int pid = secondaryService.getPid();
                    // Note that, though this API lets us request to
                    // kill any process based on its PID, the kernel
                    // still imposes standard restrictions on which PIDs you
                    // can actually kill.  Typically this means only
                    // the process running your application and any additional
                    // processes created by that app as shown here. Packages
                    // sharing a common UID are also able to kill each
                    // other's processes.
                    Process.killProcess(pid);
                    callbackText.setText("Killed service process.");
                } catch (RemoteException ex) {
                    // Recover gracefully from the process hosting the
                    // server dying.
                    // For purposes of this sample, put up a notification.
                    Toast.makeText(Binding.this,
                            R.string.remote_call_failed,
                            Toast.LENGTH_SHORT).show();
                }
            }
        }
    };

    // ----------------------------------------------------------------------
    // Code showing how to deal with callbacks.
    // ----------------------------------------------------------------------

    /**
     * This implementation is used to receive callbacks from the remote
     * service.
     */
    private IRemoteServiceCallback mCallback = new IRemoteServiceCallback.Stub() {
        /**
         * This is called by the remote service regularly to tell us about
         * new values.  Note that IPC calls are dispatched through a thread
         * pool running in each process, so the code executing here is
         * NOT running in our main thread like most other things. So,
         * to update the UI, we need to use a Handler to hop over there.
         */
        public void valueChanged(int value) {
            handler.sendMessage(handler.obtainMessage(BUMP_MSG, value, 0));
        }
    };

    private static final int BUMP_MSG = 1;

    private static class InternalHandler extends Handler {
        private final WeakReference<TextView> weakTextView;

        InternalHandler(TextView textView) {
            weakTextView = new WeakReference<>(textView);
        }

        @Override
        public void handleMessage(Message msg) {
            switch (msg.what) {
                case BUMP_MSG:
                    TextView textView = weakTextView.get();
                    if (textView != null) {
                        textView.setText("Received from service: " + msg.arg1);
                    }
                    break;
                default:
                    super.handleMessage(msg);
            }
        }
    }
}