Android Kotlin Fundamentals: 6.2 Coroutines and Room

1. Welcome

This codelab is part of the Android Kotlin Fundamentals course. You'll get the most value out of this course if you work through the codelabs in sequence. All the course codelabs are listed on the Android Kotlin Fundamentals codelabs landing page.

Introduction

One of the top priorities for creating a flawless user experience is ensuring the UI of your app is always responsive and running smoothly. To deliver this experience, we can improve UI performance by moving long-running tasks, such as database operations, into the background.

In this codelab, you implement the user-facing portion of the TrackMySleepQuality app, using Kotlin coroutines to perform database operations away from the main thread.

What you should already know

You should be familiar with:

  • Building a basic user interface (UI) using an activity, fragments, views, and click handlers.
  • Navigating between fragments, and using safeArgs to pass simple data between fragments.
  • View models, view model factories, transformations, and LiveData.
  • How to create a Room database, create a DAO, and define entities.
  • Basic threading and multiprocessing concepts.

What you'll learn

  • How threads work in Android.
  • How to use Kotlin coroutines to move database operations away from the main thread.
  • How to display formatted data in a TextView.

What you'll do

  • Extend the TrackMySleepQuality app to collect, store, and display data in and from the database.
  • Use coroutines to run long-running database operations in the background.
  • Use LiveData to trigger navigation and the display of a snackbar.
  • Use LiveData to enable and disable buttons.

2. App overview

In this codelab, you build the view model, coroutines, and data-display portions of the TrackMySleepQuality app.

The app has two screens, represented by fragments, as shown in the figure below.

WTsRlkiNXXQ7fe3myuNV8SigzmETej7zu35m_x7VEPJNGUwKLNrSFg1k7RPur1Y6tvMcInSIKbeHysH-AvR2MYoJCkOsHWBpgyQ6ut4Bvmxa5tpX9NVMIv7lc-7gDLTw4dUSV7wFkQ

The first screen, shown on the left, has buttons to start and stop tracking. The screen shows all the user's sleep data. The Clear button permanently deletes all the data that the app has collected for the user.

The second screen, shown on the right, is for selecting a sleep-quality rating. In the app, the rating is represented numerically. For development purposes, the app shows both the face icons and their numerical equivalents.

The user's flow is as follows:

  • User opens the app and is presented with the sleep-tracking screen.
  • User taps the Start button. This records the starting time and displays it. The Start button is disabled, and the Stop button is enabled.
  • User taps the Stop button. This records the ending time and opens the sleep-quality screen.
  • User selects a sleep-quality icon. The screen closes, and the tracking screen displays the sleep-ending time and sleep quality. The Stop button is disabled and the Start button is enabled. The app is ready for another night.
  • The Clear button is enabled whenever there is data in the database. When the user taps the Clear button, all their data is erased without recourse—there is no "Are you sure?" message.

This app uses a simplified architecture, as shown below in the context of the full architecture. The app uses only the following components:

  • UI controller
  • View model and LiveData
  • A Room database

Q7-Cq9-Y4h13EbiYcZR---sZ74dgkqejB699RY7cCIxGresnPfPKHqjX8HsTVB24r-c3gqRAgWUrERqjraXtQPpdCZ-ZeJhtUHw9s2-j39pW9Cerk0Qethe_Pc3oOy0hVl-q9i47Xg

3. Task: Inspect the starter code

In this task, you use a TextView to display formatted sleep tracking data. (This is not the final user interface. You will improve the UI in another codelab.)

You can continue with the TrackMySleepQuality app that you built in the previous codelab or download the starter app for this codelab.

Step 1: Download and run the starter app

  1. Download the TrackMySleepQuality-Coroutines-Starter app from GitHub.
  2. Build and run the app. The app shows the UI for the SleepTrackerFragment fragment, but no data. The buttons do not respond to taps.

Step 2: Inspect the code

The starter code for this codelab is the same as the solution code for the Create a Room Database codelab.

  1. Open res/layout/activity_main.xml. This layout contains the nav_host_fragment fragment. Also, notice the <merge> tag. The merge tag can be used to eliminate redundant layouts when including layouts, and it's a good idea to use it. An example of a redundant layout would be ConstraintLayout > LinearLayout > TextView, where the system might be able to eliminate the LinearLayout. This kind of optimization can simplify the view hierarchy and improve app performance.
  2. In the navigation folder, open navigation.xml. You can see two fragments and the navigation actions that connect them.
  3. In the layout folder, open fragment_sleep_tracker.xml and click on the Code view to see its XML layout. Notice the following:
  • The layout data is wrapped in a <layout> element to enable data binding.
  • ConstraintLayout and the other views are arranged inside the <layout> element.
  • The file has a placeholder <data> tag.

The starter app also provides dimensions, colors, and styling for the UI. The app contains a Room database, a DAO, and a SleepNight entity. If you did not complete the preceding "Create a Room Database" codelab, make sure you explore these aspects of the code on your own.

4. Task: Add a ViewModel

Now that you have a database and a UI, you need to collect data, add the data to the database, and display the data. All this work is done in the view model. Your sleep-tracker view model will handle button clicks, interact with the database via the DAO, and provide data to the UI via LiveData. All database operations will have to be run away from the main UI thread, and you'll do that using coroutines.

Step 1: Add SleepTrackerViewModel

  1. In the sleeptracker package, open SleepTrackerViewModel.kt.
  2. Inspect the SleepTrackerViewModel class, which is provided for you in the starter app and is also shown below. Note that the class extends AndroidViewModel. This class is the same as ViewModel, but it takes the application context as a constructor parameter and makes it available as a property. You will need this later.
class SleepTrackerViewModel(
       val database: SleepDatabaseDao,
       application: Application) : AndroidViewModel(application) {
}

Step 2: Add SleepTrackerViewModelFactory

  1. In the sleeptracker package, open SleepTrackerViewModelFactory.kt.
  2. Examine the code that's provided for you for the factory, which is shown below:
class SleepTrackerViewModelFactory(
       private val dataSource: SleepDatabaseDao,
       private val application: Application) : ViewModelProvider.Factory {
   @Suppress("unchecked_cast")
   override fun <T : ViewModel?> create(modelClass: Class<T>): T {
       if (modelClass.isAssignableFrom(SleepTrackerViewModel::class.java)) {
           return SleepTrackerViewModel(dataSource, application) as T
       }
       throw IllegalArgumentException("Unknown ViewModel class")
   }
}

Take note of the following:

  • The provided SleepTrackerViewModelFactory takes the same argument as the ViewModel and extends ViewModelProvider.Factory.
  • Inside the factory, the code overrides create(), which takes any class type as an argument and returns a ViewModel.
  • In the body of create(), the code checks that there is a SleepTrackerViewModel class available, and if there is, returns an instance of it. Otherwise, the code throws an exception.

Step 3: Update SleepTrackerFragment

  1. In SleepTrackerFragment.kt, get a reference to the application context. Put the reference in onCreateView(), below binding. You need a reference to the app that this fragment is attached to, to pass into the view-model factory provider.

The requireNotNull Kotlin function throws an IllegalArgumentException if the value is null.

val application = requireNotNull(this.activity).application
  1. You need a reference to your data source via a reference to the DAO. In onCreateView(), before the return, define a dataSource. To get a reference to the DAO of the database, use SleepDatabase.getInstance(application).sleepDatabaseDao.
val dataSource = SleepDatabase.getInstance(application).sleepDatabaseDao
  1. In onCreateView(), before the return, create an instance of the viewModelFactory. You need to pass it dataSource and the application.
val viewModelFactory = SleepTrackerViewModelFactory(dataSource, application)
  1. Now that you have a factory, get a reference to the SleepTrackerViewModel. The SleepTrackerViewModel::class.java parameter refers to the runtime Java class of this object.
val sleepTrackerViewModel =
       ViewModelProvider(
               this, viewModelFactory).get(SleepTrackerViewModel::class.java)
  1. Your finished code should look like this:
// Create an instance of the ViewModel Factory.
val dataSource = SleepDatabase.getInstance(application).sleepDatabaseDao
val viewModelFactory = SleepTrackerViewModelFactory(dataSource, application)

// Get a reference to the ViewModel associated with this fragment.
val sleepTrackerViewModel =
       ViewModelProvider(
               this, viewModelFactory).get(SleepTrackerViewModel::class.java)

Here's the onCreateView() method so far:

override fun onCreateView(inflater: LayoutInflater, container: ViewGroup?,
                              savedInstanceState: Bundle?): View? {

        // Get a reference to the binding object and inflate the fragment views.
        val binding: FragmentSleepTrackerBinding = DataBindingUtil.inflate(
                inflater, R.layout.fragment_sleep_tracker, container, false)

        val application = requireNotNull(this.activity).application

        val dataSource = SleepDatabase.getInstance(application).sleepDatabaseDao

        val viewModelFactory = SleepTrackerViewModelFactory(dataSource, application)

        val sleepTrackerViewModel =
                ViewModelProvider(
                        this, viewModelFactory).get(SleepTrackerViewModel::class.java)

        return binding.root
    }

Step 4: Add data binding for the view model

With the basic ViewModel in place, you need to finish setting up data binding in the SleepTrackerFragment to connect the ViewModel with the UI.

In the fragment_sleep_tracker.xml layout file:

  1. Inside the <data> section, create a <variable> that references the SleepTrackerViewModel class.
<data>
   <variable
       name="sleepTrackerViewModel"
       type="com.example.android.trackmysleepquality.sleeptracker.SleepTrackerViewModel" />
</data>

In SleepTrackerFragment.kt:

  1. Set the current activity as the lifecycle owner of the binding. Add this code inside the onCreateView() method, before the return statement:
binding.setLifecycleOwner(this)
  1. Assign the sleepTrackerViewModel binding variable to the sleepTrackerViewModel. Put this code inside onCreateView(), below the code that creates the SleepTrackerViewModel:
binding.sleepTrackerViewModel = sleepTrackerViewModel
  1. You may see an error, because you have to recreate the binding object. Clean and rebuild the project to get rid of the error.
  2. Finally, as always, make sure your code builds and runs without errors.

5. Concept: Coroutines

In Kotlin, coroutines are the way to handle long-running tasks elegantly and efficiently instead of callbacks. Kotlin coroutines let you convert callback-based code to sequential code. Code written sequentially is typically easier to read and maintain. Unlike callbacks, coroutines can safely use valuable language features such as exceptions. And most importantly coroutines have a higher degree of maintainability and flexibility. In the end, coroutines and callbacks perform the same functionality: they are both ways of handling potentially long-running asynchronous tasks within an app.

952b19bd8601a7a5.png

Coroutines have the following properties:

  • Coroutines are asynchronous and non-blocking.
  • Coroutines use suspend functions to make asynchronous code sequential.

Coroutines are asynchronous.

A coroutine runs independently from the main execution steps of your program. This could be in parallel or on a separate processor. It could also be that while the rest of the app is waiting for input, you sneak in a bit of processing. One of the important aspects of asynchronous programming is you cannot expect the result to be immediately available, until you explicitly wait for it.

For example, let's say you have a question that requires research, and you politely request to ask a colleague to find the answer. Your colleague then starts to work on it by themselves. You can continue to do other unrelated work that doesn't depend on the answer until your colleague returns with an answer. In this example, your colleague is doing the work asynchronously "on a separate thread".

Coroutines are non-blocking.

Non-blocking means that a coroutine does not block, or interfere with the progress of the main or UI thread. So with coroutines, users can have the smoothest possible experience, because the UI interaction, which is run on the main thread, always has priority.

Coroutines use suspend functions to make asynchronous code sequential.

The keyword suspend is Kotlin's way of marking a function, or function type, as being available to coroutines. When a coroutine calls a function marked with suspend, instead of blocking until the function returns like a normal function call, the coroutine suspends execution until the result is ready. Then the coroutine resumes where it left off, with the result.

While the coroutine is suspended and waiting for a result, it unblocks the thread that it's running on. That way, other functions or coroutines can run.

The suspend keyword doesn't specify the thread that the code runs on. A suspend function may run on a background thread, or on the main thread.

ce77d98e12909f3e.png

To use coroutines in Kotlin, you need three things:

  • A job
  • A dispatcher
  • A scope

Job: Basically, a job is anything that can be canceled. Every coroutine has a job, and you can use the job to cancel the coroutine. Jobs can be arranged into parent-child hierarchies. Canceling a parent job immediately cancels all the job's children, which is a lot more convenient than canceling each coroutine manually.

Dispatcher: The dispatcher sends off coroutines to run on various threads. For example, Dispatchers.Main runs tasks on the main thread, and Dispatchers.IO offloads blocking I/O tasks to a shared pool of threads.

Scope: A coroutine's scope defines the context in which the coroutine runs. A scope combines information about a coroutine's job and dispatchers. Scopes keep track of coroutines. When you launch a coroutine, it's "in a scope," which means that you've indicated which scope will keep track of the coroutine.

Kotlin coroutines with Architecture components

A CoroutineScope keeps track of all your coroutines and helps you to manage when your coroutines should run. It can also cancel all of the coroutines started within it. Each asynchronous operation or coroutine runs within a particular CoroutineScope.

Architecture components provide first-class support for coroutines for logical scopes in your app. Architecture components define the following built-in scopes that you can use in your app. The built-in coroutine scopes are in the KTX extensions for each corresponding Architecture component. Be sure to add the appropriate dependencies when using these scopes.

ViewModelScope: A ViewModelScope is defined for each ViewModel in your app. Any coroutine launched in this scope is automatically canceled if the ViewModel is cleared. In this codelab you will use ViewModelScope to initiate the database operations.

Room and Dispatcher

When using the Room library to perform a database operation, Room uses a Dispatchers.IO to perform the database operations in a background thread. You don't have to explicitly specify any Dispatchers. Room does this for you.

6. Task: Collect and display the data

You want the user to be able to interact with the sleep data in the following ways:

  • When the user taps the Start button, the app creates a new sleep night and stores the sleep night in the database.
  • When the user taps the Stop button, the app updates the night with an end time.
  • When the user taps the Clear button, the app erases the data in the database.

These database operations can take a long time, so they should run on a separate thread.

Step 1: Mark DAO functions as suspend functions

In SleepDatabaseDao.kt, change the convenience methods to suspend functions.

  1. Open database/SleepDatabaseDao.kt, add suspend keyword to all the methods except for getAllNights() because Room already uses a background thread for that specific @Query which returns LiveData. The complete SleepDatabaseDao class will look like this.
@Dao
interface SleepDatabaseDao {

   @Insert
   suspend fun insert(night: SleepNight)

   @Update
   suspend fun update(night: SleepNight)

   @Query("SELECT * from daily_sleep_quality_table WHERE nightId = :key")
   suspend fun get(key: Long): SleepNight?

   @Query("DELETE FROM daily_sleep_quality_table")
   suspend fun clear()

   @Query("SELECT * FROM daily_sleep_quality_table ORDER BY nightId DESC LIMIT 1")
   suspend fun getTonight(): SleepNight?

   @Query("SELECT * FROM daily_sleep_quality_table ORDER BY nightId DESC")
   fun getAllNights(): LiveData<List<SleepNight>>
}

Step 2: Set up coroutines for database operations

When the Start button in the Sleep Tracker app is tapped, you want to call a function in the SleepTrackerViewModel to create a new instance of SleepNight and store the instance in the database.

Tapping any of the buttons triggers a database operation, such as creating or updating a SleepNight. Since database operations can take a while, you use coroutines to implement click handlers for the app's buttons.

  1. Open the app-level build.gradle file. Under the dependencies section, you need the following dependencies, which were added for you.
implementation "androidx.lifecycle:lifecycle-viewmodel-ktx:2.2.0"

// Kotlin Extensions and Coroutines support for Room
implementation "androidx.room:room-ktx:$room_version"
  1. Open the SleepTrackerViewModel.kt file.
  2. Define a variable called tonight to hold the current night. Make the variable MutableLiveData, because you need to be able to observe the data and change it.
private var tonight = MutableLiveData<SleepNight?>()
  1. To initialize the tonight variable as soon as possible, create an init block below the definition of tonight and call initializeTonight(). You define initializeTonight() in the next step.
init {
   initializeTonight()
}
  1. Below the init block, implement initializeTonight(). Use the viewModelScope.launch to start a coroutine in the ViewModelScope. Inside the curly braces, get the value for tonight from the database by calling getTonightFromDatabase(), and assign the value to tonight.value. You define getTonightFromDatabase() in the next step.

Notice the use of curly braces for launch. They are defining a lambda expression, which is a function without a name. In this example, you are passing in a lambda to the launch coroutine builder. This builder creates a coroutine and assigns the execution of that lambda to the corresponding dispatcher.

private fun initializeTonight() {
   viewModelScope.launch {
       tonight.value = getTonightFromDatabase()
   }
}
  1. Implement getTonightFromDatabase(). Define it as a private suspend function that returns a nullable SleepNight, if there is no current started SleepNight. This leaves you with an error, because the function has to return something.
private suspend fun getTonightFromDatabase(): SleepNight? { }
  1. Inside the function body of getTonightFromDatabase(), get tonight (the newest night) from the database. If the start and end times are not the same, meaning that the night has already been completed, return null. Otherwise, return the night.
       var night = database.getTonight()
       if (night?.endTimeMilli != night?.startTimeMilli) {
           night = null
       }
       return night

Your completed getTonightFromDatabase() suspend function should look like this. There should be no more errors.

private suspend fun getTonightFromDatabase(): SleepNight? {
    var night = database.getTonight()
    if (night?.endTimeMilli != night?.startTimeMilli) {
        night = null
    }
    return night
}

Step 3: Add the click handler for the Start button

Now you can implement onStartTracking(), the click handler for the Start button. You need to create a new SleepNight, insert it into the database, and assign it to tonight. The structure of onStartTracking() is going to be similar to initializeTonight().

  1. In SleepTrackerViewModel.kt, start with the function definition for onStartTracking(). You can put the click handlers below getTonightFromDatabase().
fun onStartTracking() {}
  1. Inside onStartTracking(), launch a coroutine in the viewModelScope, because you need this result to continue and update the UI.
viewModelScope.launch {}
  1. Inside the coroutine launch, create a new SleepNight, which captures the current time as the start time.
        val newNight = SleepNight()
  1. Still inside the coroutine launch, call insert() to insert newNight into the database. You will see an error, because you have not defined this insert() suspend function yet. Note this is not the same insert() as the method with the same name in SleepDatabaseDAO.kt
       insert(newNight)
  1. Also inside the coroutine launch, update tonight.
       tonight.value = getTonightFromDatabase()
  1. Below onStartTracking(), define insert() as a private suspend function that takes a SleepNight as its argument.
private suspend fun insert(night: SleepNight) {}
  1. Within the insert() method, use the DAO to insert night into the database.
       database.insert(night)

Note that a coroutine with Room uses Dispatchers.IO, so this will not happen on the main thread.

  1. In the fragment_sleep_tracker.xml layout file, add the click handler for onStartTracking() to the start_button using the magic of data binding that you set up earlier. The @{() -> function notation creates a lambda function that takes no arguments and calls the click handler in the sleepTrackerViewModel.
android:onClick="@{() -> sleepTrackerViewModel.onStartTracking()}"
  1. Build and run your app. Tap the Start button. This action creates data, but you cannot see anything yet. You fix that next.

Without Room

fun someWorkNeedsToBeDone {
   viewModelScope.launch {
        suspendFunction()
   }
}

suspend fun suspendFunction() {
   withContext(Dispatchers.IO) {
       longrunningWork()
   }
}

Using Room

// Using Room
fun someWorkNeedsToBeDone {
   viewModelScope.launch {
        suspendDAOFunction()
   }
}

suspend fun suspendDAOFunction() {
   // No need to specify the Dispatcher, Room uses Dispatchers.IO.
   longrunningDatabaseWork()
}

Step 4: Display the data

In the SleepTrackerViewModel.kt, the nights variable references LiveData because getAllNights() in the DAO returns LiveData.

It is a Room feature that every time the data in the database changes, the LiveData nights is updated to show the latest data. You never need to explicitly set the LiveData or update it. Room updates the data to match the database.

However, if you display nights in a text view, it will show the object reference. To see the contents of the object, transform the data into a formatted string. Use a Transformation map that's executed every time nights receives new data from the database.

  1. Open the Util.kt file and uncomment the code for the definition of formatNights()and the associated import statements. To uncomment code in Android Studio, select all the code marked with // and press Cmd+/ or Control+/.
  2. Notice formatNights() returns a type Spanned, which is an HTML-formatted string. This is very convenient because Android's TextView has the ability to render basic HTML.
  3. Open res > values > strings.xml. Notice the use of CDATA to format the string resources for displaying the sleep data.
  4. Open SleepTrackerViewModel.kt. In the SleepTrackerViewModel class, define a variable called nights. Get all the nights from the database and assign them to the nights variable.
private val nights = database.getAllNights()
  1. Right below the definition of nights, add code to transform nights into a nightsString. Use the formatNights() function from Util.kt.

Pass nights into the map() function from the Transformations class. To get access to your string resources, define the mapping function as calling formatNights(). Supply nights and a Resources object.

val nightsString = Transformations.map(nights) { nights ->
   formatNights(nights, application.resources)
}
  1. Open the fragment_sleep_tracker.xml layout file. In the TextView, in the android:text property, you can now replace the resource string with a reference to nightsString.
android:text="@{sleepTrackerViewModel.nightsString}"
  1. Rebuild your code and run the app. All your sleep data with start times should display now.
  2. Tap the Start button a few more times, and you see more data. e6eabf9793d5ab63.png

In the next step, you enable functionality for the Stop button.

Step 5: Add the click handler for the Stop button

Using the same pattern as in the previous step, implement the click handler for the Stop button in SleepTrackerViewModel.

  1. Add onStopTracking() to the ViewModel. Launch a coroutine in the viewModelScope. If the end time hasn't been set yet, set the endTimeMilli to the current system time and call update() with the night data.

In Kotlin, the return@label syntax specifies the function from which this statement returns, among several nested functions.

fun onStopTracking() {
   viewModelScope.launch {
       val oldNight = tonight.value ?: return@launch
       oldNight.endTimeMilli = System.currentTimeMillis()
       update(oldNight)
   }
}
  1. Implement update() using the same pattern as you used to implement insert().
private suspend fun update(night: SleepNight) {
    database.update(night)
}
  1. To connect the click handler to the UI, open the fragment_sleep_tracker.xml layout file and add the click handler to the stop_button.
android:onClick="@{() -> sleepTrackerViewModel.onStopTracking()}"
  1. Build and run your app.
  2. Tap Start, then tap Stop. You see the start time, end time, sleep quality with no value, and time slept. fc7e561d95fd9c02.png

Step 6: Add the click handler for the Clear button

  1. Similarly, implement onClear() and clear().
fun onClear() {
   viewModelScope.launch {
       clear()
       tonight.value = null
   }
}

suspend fun clear() {
    database.clear()
}
  1. To connect the click handler to the UI, open fragment_sleep_tracker.xml and add the click handler to the clear_button.
android:onClick="@{() -> sleepTrackerViewModel.onClear()}"
  1. Build and run your app.
  2. Tap Clear to get rid of all the data. Then tap Start and Stop to make new data.

7. Solution code

Android Studio project: TrackMySleepQualityCoroutines

8. Summary

  • Use ViewModel, ViewModelFactory, and data binding to set up the UI architecture for the app.
  • To keep the UI running smoothly, use coroutines for long-running tasks, such as all database operations.
  • Coroutines are asynchronous and non-blocking. They use suspend functions to make asynchronous code sequential.
  • When a coroutine calls a function marked with suspend, instead of blocking until that function returns like a normal function call, it suspends execution until the result is ready. Then it resumes where it left off with the result.
  • The difference between blocking and suspending is that if a thread is blocked, no other work happens. If the thread is suspended, other work happens until the result is available.

To implement click handlers that trigger database operations, follow this pattern:

  1. Launch a coroutine that runs on the main or UI thread, because the result affects the UI.
  2. Call a suspend function to do the long-running work, so that you don't block the UI thread while waiting for the result.
  3. The long-running work has nothing to do with the UI, so switch to the I/O context. That way, the work can run in a thread pool that's optimized and set aside for these kinds of operations.
  4. Then call the long running function to do the work.

Use a Transformations map to create a string from a LiveData object every time the object changes.

9. Learn more

Udacity course:

Android Developer Documentation:

Other documentation and articles:

10. Homework

This section lists possible homework assignments for students who are working through this codelab as part of a course led by an instructor. It's up to the instructor to do the following:

  • Assign homework if required.
  • Communicate to students how to submit homework assignments.
  • Grade the homework assignments.

Instructors can use these suggestions as little or as much as they want, and should feel free to assign any other homework they feel is appropriate.

If you're working through this codelab on your own, feel free to use these homework assignments to test your knowledge.

Answer these questions

Question 1

Which of the following is not a benefit of using coroutines?:

  • They are non-blocking
  • They run asynchronously.
  • They can be run on a thread other than the main thread.
  • They always make app runs faster.
  • They can use exceptions.
  • They can be written and read as linear code.

Question 2

Which of the following is not true for suspend functions.?

  • An ordinary function annotated with the suspend keyword.
  • A function that can be called inside coroutines.
  • While a suspend function is running, the calling thread is suspended.
  • Suspend functions must always run in the background.

Question 3

Which of the following statements is NOT true?

  • When execution is blocked, no other work can be executed on the blocked thread.
  • When execution is suspended, the thread can do other work while waiting for the offloaded work to complete.
  • Suspending is more efficient, because threads may not be waiting, doing nothing.
  • Whether blocked or suspended, execution is still waiting for the result of the coroutine before continuing.

11. Next codelab

Start to the next lesson: Use LiveData to control button states

For links to other codelabs in this course, see the Android Kotlin Fundamentals codelabs landing page.