動作の変更点: Android 15 以上をターゲットとするアプリ

以前のリリースと同様に、Android 15 には、アプリに影響を与える可能性のある動作変更が含まれています。下記の動作変更は、Android 15 以上をターゲットとするアプリに限り適用されます。アプリが Android 15 以上をターゲットとする場合は、必要に応じてアプリを変更し、下記の動作に適切に対応できるようにしてください。

アプリの targetSdkVersion に関係なく、Android 15 で実行されるすべてのアプリに影響する動作変更のリストも必ずご確認ください。

コア機能

Android 15 では、Android システムのさまざまなコア機能を変更または拡張しています。

フォアグラウンド サービスの変更

We are making the following changes to foreground services with Android 15.

Data sync foreground service timeout behavior

Android 15 introduces a new timeout behavior to dataSync for apps targeting Android 15 (API level 35) or higher. This behavior also applies to the new mediaProcessing foreground service type.

The system permits an app's dataSync services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). When Service.onTimeout() is called, the service is no longer considered a foreground service. If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"

To avoid problems with this behavior change, you can do one or more of the following:

  1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
  2. Make sure your app's dataSync services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
  3. Only start dataSync foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
  4. Instead of using a dataSync foreground service, use an alternative API.

If your app's dataSync foreground services have run for 6 hours in the last 24, you cannot start another dataSync foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another dataSync foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type dataSync".

Testing

To test your app's behavior, you can enable data sync timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds

New media processing foreground service type

Android 15 introduces a new foreground service type, mediaProcessing. This service type is appropriate for operations like transcoding media files. For example, a media app might download an audio file and need to convert it to a different format before playing it. You can use a mediaProcessing foreground service to make sure the conversion continues even while the app is in the background.

The system permits an app's mediaProcessing services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"

To avoid having the exception, you can do one of the following:

  1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
  2. Make sure your app's mediaProcessing services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
  3. Only start mediaProcessing foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
  4. Instead of using a mediaProcessing foreground service, use an alternative API, like WorkManager.

If your app's mediaProcessing foreground services have run for 6 hours in the last 24, you cannot start another mediaProcessing foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another mediaProcessing foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type mediaProcessing".

For more information about the mediaProcessing service type, see Changes to foreground service types for Android 15: Media processing.

Testing

To test your app's behavior, you can enable media processing timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds

Restrictions on BOOT_COMPLETED broadcast receivers launching foreground services

There are new restrictions on BOOT_COMPLETED broadcast receivers launching foreground services. BOOT_COMPLETED receivers are not allowed to launch the following types of foreground services:

If a BOOT_COMPLETED receiver tries to launch any of those types of foreground services, the system throws ForegroundServiceStartNotAllowedException.

Testing

To test your app's behavior, you can enable these new restrictions even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). Run the following adb command:

adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name

To send a BOOT_COMPLETED broadcast without restarting the device, run the following adb command:

adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name

Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW permission

以前は、アプリが SYSTEM_ALERT_WINDOW 権限を保持している場合、アプリが現在バックグラウンドで実行されている場合でも、フォアグラウンド サービスを起動できました(バックグラウンドでの起動制限の免除で説明しています)。

アプリが Android 15 をターゲットとしている場合、この免除はより限定的になりました。アプリには SYSTEM_ALERT_WINDOW 権限が必要になり、また、表示可能なオーバーレイ ウィンドウも必要になります。つまり、フォアグラウンド サービスを開始する前に、アプリがまず TYPE_APPLICATION_OVERLAY ウィンドウを起動、そのウィンドウを表示する必要があります。

アプリがこれらの新しい要件を満たさずにバックグラウンドからフォアグラウンド サービスを起動しようとすると(他の例外がない限り)、システムは ForegroundServiceStartNotAllowedException をスローします。

アプリが SYSTEM_ALERT_WINDOW 権限を宣言し、バックグラウンドからフォアグラウンド サービスを起動する場合、この変更の影響を受ける可能性があります。アプリが ForegroundServiceStartNotAllowedException を取得した場合は、アプリの処理順序を確認し、バックグラウンドからフォアグラウンド サービスを開始する前に、アプリにアクティブなオーバーレイ ウィンドウがすでに存在することを確認します。オーバーレイ ウィンドウが現在表示されているかどうかを確認するには、View.getWindowVisibility() を呼び出します。また、View.onWindowVisibilityChanged() を上書きして、可視性が変更されるたびに通知を受け取ることもできます。

テスト

アプリの動作をテストするには、アプリが Android 15 をターゲットとしていない場合でも、これらの新しい制限を有効にできます(アプリが Android 15 デバイスで実行されている場合)。バックグラウンドからフォアグラウンド サービスを起動する際の新しい制限を有効にするには、次の adb コマンドを実行します。

adb shell am compat enable FGS_SAW_RESTRICTIONS your-package-name

アプリがサイレント モードのグローバル状態を変更できるタイミングの変更

Apps that target Android 15 (API level 35) and higher can no longer change the global state or policy of Do Not Disturb (DND) on a device (either by modifying user settings, or turning off DND mode). Instead, apps must contribute an AutomaticZenRule, which the system combines into a global policy with the existing most-restrictive-policy-wins scheme. Calls to existing APIs that previously affected global state (setInterruptionFilter, setNotificationPolicy) result in the creation or update of an implicit AutomaticZenRule, which is toggled on and off depending on the call-cycle of those API calls.

Note that this change only affects observable behavior if the app is calling setInterruptionFilter(INTERRUPTION_FILTER_ALL) and expects that call to deactivate an AutomaticZenRule that was previously activated by their owners.

OpenJDK API の変更

Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.

Some of these changes can affect app compatibility for apps targeting Android 15 (API level 35):

  • Changes to string formatting APIs: Validation of argument index, flags, width, and precision are now more strict when using the following String.format() and Formatter.format() APIs:

    For example, the following exception is thrown when an argument index of 0 is used (%0 in the format string):

    IllegalFormatArgumentIndexException: Illegal format argument index = 0
    

    In this case, the issue can be fixed by using an argument index of 1 (%1 in the format string).

  • Changes to component type of Arrays.asList(...).toArray(): When using Arrays.asList(...).toArray(), the component type of the resulting array is now an Object—not the type of the underlying array's elements. So the following code throws a ClassCastException:

    String[] elements = (String[]) Arrays.asList("one", "two").toArray();
    

    For this case, to preserve String as the component type in the resulting array, you could use Collection.toArray(Object[]) instead:

    String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
    
  • Changes to language code handling: When using the Locale API, language codes for Hebrew, Yiddish, and Indonesian are no longer converted to their obsolete forms (Hebrew: iw, Yiddish: ji, and Indonesian: in). When specifying the language code for one of these locales, use the codes from ISO 639-1 instead (Hebrew: he, Yiddish: yi, and Indonesian: id).

  • Changes to random int sequences: Following the changes made in https://bugs.openjdk.org/browse/JDK-8301574, the following Random.ints() methods now return a different sequence of numbers than the Random.nextInt() methods do:

    Generally, this change shouldn't result in app-breaking behavior, but your code shouldn't expect the sequence generated from Random.ints() methods to match Random.nextInt().

The new SequencedCollection API can affect your app's compatibility after you update compileSdk in your app's build configuration to use Android 15 (API level 35):

  • Collision with MutableList.removeFirst() and MutableList.removeLast() extension functions in kotlin-stdlib

    The List type in Java is mapped to the MutableList type in Kotlin. Because the List.removeFirst() and List.removeLast() APIs have been introduced in Android 15 (API level 35), the Kotlin compiler resolves function calls, for example list.removeFirst(), statically to the new List APIs instead of to the extension functions in kotlin-stdlib.

    If an app is re-compiled with compileSdk set to 35 and minSdk set to 34 or lower, and then the app is run on Android 14 and lower, a runtime error is thrown:

    java.lang.NoSuchMethodError: No virtual method
    removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
    

    The existing NewApi lint option in Android Gradle Plugin can catch these new API usages.

    ./gradlew lint
    
    MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi]
          list.removeFirst()
    

    To fix the runtime exception and lint errors, the removeFirst() and removeLast() function calls can be replaced with removeAt(0) and removeAt(list.lastIndex) respectively in Kotlin. If you're using Android Studio Ladybug | 2024.1.3 or higher, it also provides a quick fix option for these errors.

    Consider removing @SuppressLint("NewApi") and lintOptions { disable 'NewApi' } if the lint option has been disabled.

  • Collision with other methods in Java

    New methods have been added into the existing types, for example, List and Deque. These new methods might not be compatible with the methods with the same name and argument types in other interfaces and classes. In the case of a method signature collision with incompatibility, the javac compiler outputs a build-time error. For example:

    Example error 1:

    javac MyList.java
    
    MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List
      public void removeLast() {
                  ^
      return type void is not compatible with Object
      where E is a type-variable:
        E extends Object declared in interface List
    

    Example error 2:

    javac MyList.java
    
    MyList.java:7: error: types Deque<Object> and List<Object> are incompatible;
    public class MyList implements  List<Object>, Deque<Object> {
      both define reversed(), but with unrelated return types
    1 error
    

    Example error 3:

    javac MyList.java
    
    MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible;
    public static class MyList implements List<Object>, MyInterface<Object> {
      class MyList inherits unrelated defaults for getFirst() from types List and MyInterface
      where E#1,E#2 are type-variables:
        E#1 extends Object declared in interface List
        E#2 extends Object declared in interface MyInterface
    1 error
    

    To fix these build errors, the class implementing these interfaces should override the method with a compatible return type. For example:

    @Override
    public Object getFirst() {
        return List.super.getFirst();
    }
    

セキュリティ

Android 15 では、システムのセキュリティを強化し、悪意のあるアプリからアプリとユーザーを保護するための変更が加えられています。

制限付きの TLS バージョン

Android 15 restricts the usage of TLS versions 1.0 and 1.1. These versions had previously been deprecated in Android, but are now disallowed for apps targeting Android 15.

保護されたバックグラウンド アクティビティの起動

Android 15 protects users from malicious apps and gives them more control over their devices by adding changes that prevent malicious background apps from bringing other apps to the foreground, elevating their privileges, and abusing user interaction. Background activity launches have been restricted since Android 10 (API level 29).

Other changes

In addition to the restriction for UID matching, these other changes are also included:

  • Change PendingIntent creators to block background activity launches by default. This helps prevent apps from accidentally creating a PendingIntent that could be abused by malicious actors.
  • Don't bring an app to the foreground unless the PendingIntent sender allows it. This change aims to prevent malicious apps from abusing the ability to start activities in the background. By default, apps are not allowed to bring the task stack to the foreground unless the creator allows background activity launch privileges or the sender has background activity launch privileges.
  • Control how the top activity of a task stack can finish its task. If the top activity finishes a task, Android will go back to whichever task was last active. Moreover, if a non-top activity finishes its task, Android will go back to the home screen; it won't block the finish of this non-top activity.
  • Prevent launching arbitrary activities from other apps into your own task. This change prevents malicious apps from phishing users by creating activities that appear to be from other apps.
  • Block non-visible windows from being considered for background activity launches. This helps prevent malicious apps from abusing background activity launches to display unwanted or malicious content to users.

より安全なインテント

Android 15 では、インテントをより安全かつ堅牢にするために、新しいオプションのセキュリティ対策が導入されています。この変更は、悪意のあるアプリによって悪用されるおそれのある潜在的な脆弱性やインテントの不正使用を防止することを目的としています。Android 15 では、インテントのセキュリティに関して、主に 2 つの改善点があります。

  • ターゲットのインテント フィルタに一致させる: 特定のコンポーネントをターゲットとするインテントは、ターゲットのインテント フィルタの仕様に正確に一致する必要があります。別のアプリのアクティビティを起動するためのインテントを送信する場合、ターゲット インテント コンポーネントは、受信側のアクティビティで宣言されたインテント フィルタと一致している必要があります。
  • インテントにはアクションが必要です。アクションのないインテントは、インテント フィルタと一致しなくなります。つまり、アクティビティやサービスを起動するために使用するインテントには、明確に定義されたアクションが必要です。

アプリがこれらの変更にどのように対応するかを確認するには、アプリで StrictMode を使用します。Intent の使用違反に関する詳細なログを表示するには、次のメソッドを追加します。

Kotlin


fun onCreate() {
    StrictMode.setVmPolicy(VmPolicy.Builder()
        .detectUnsafeIntentLaunch()
        .build()
    )
}

Java


public void onCreate() {
    StrictMode.setVmPolicy(new VmPolicy.Builder()
            .detectUnsafeIntentLaunch()
            .build());
}

ユーザー エクスペリエンスとシステム UI

Android 15 には、より一貫性があり直感的なユーザー エクスペリエンスを実現するための変更がいくつか含まれています。

ウィンドウの切れ込みの変更

Android 15 では、ウィンドウの切り欠きに関連する 2 つの変更があります。エッジツーエッジがデフォルトで適用され、システムバーのデフォルト構成などの構成も変更されています。

エッジ ツー エッジの適用

Apps are edge-to-edge by default on devices running Android 15 if the app is targeting Android 15 (API level 35).

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.


An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. This app mostly uses Material 3 Compose Components that automatically apply insets. This screen is not negatively impacted by the Android 15 edge-to-edge enforcement.

This is a breaking change that might negatively impact your app's UI. The changes affect the following UI areas:

  • Gesture handle navigation bar
    • Transparent by default.
    • Bottom offset is disabled so content draws behind the system navigation bar unless insets are applied.
    • setNavigationBarColor and R.attr#navigationBarColor are deprecated and don't affect gesture navigation.
    • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced continue to have no effect on gesture navigation.
  • 3-button navigation
    • Opacity set to 80% by default, with color possibly matching the window background.
    • Bottom offset disabled so content draws behind the system navigation bar unless insets are applied.
    • setNavigationBarColor and R.attr#navigationBarColor are set to match the window background by default. The window background must be a color drawable for this default to apply. This API is deprecated but continues to affect 3-button navigation.
    • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced is true by default, which adds an 80% opaque background across 3-button navigation.
  • Status bar
    • Transparent by default.
    • The top offset is disabled so content draws behind the status bar unless insets are applied.
    • setStatusBarColor and R.attr#statusBarColor are deprecated and have no effect on Android 15.
    • setStatusBarContrastEnforced and R.attr#statusBarContrastEnforced are deprecated but still have an effect on Android 15.
  • Display cutout
    • layoutInDisplayCutoutMode of non-floating windows must be LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. SHORT_EDGES, NEVER, and DEFAULT are interpreted as ALWAYS so that users don't see a black bar caused by the display cutout and appear edge-to-edge.

The following example shows an app before and after targeting Android 15 (API level 35), and before and after applying insets.

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.
An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. However, many elements are now hidden by the status bar, 3-button navigation bar, or display cutout due to the Android 15 edge-to-edge enforcements. Hidden UI includes the Material 2 top app bar, floating action buttons, and list items.
An app that targets Android 15 (API level 35), is edge to edge on an Android 15 device and applies insets so that UI is not hidden.
What to check if your app is already edge-to-edge

If your app is already edge-to-edge and applies insets, you are mostly unimpacted, except in the following scenarios. However, even if you think you aren't impacted, we recommend you test your app.

  • You have a non-floating window, such as an Activity that uses SHORT_EDGES, NEVER or DEFAULT instead of LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. If your app crashes on launch, this might be due to your splashscreen. You can either upgrade the core splashscreen dependency to 1.2.0-alpha01 or later or set window.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always.
  • There might be lower-traffic screens with occluded UI. Verify these less-visited screens don't have occluded UI. Lower-traffic screens include:
    • Onboarding or sign-in screens
    • Settings pages
What to check if your app is not already edge-to-edge

If your app is not already edge-to-edge, you are most likely impacted. In addition to the scenarios for apps that are already edge-to-edge, you should consider the following:

  • If your app uses Material 3 Components ( androidx.compose.material3) in compose, such as TopAppBar, BottomAppBar, and NavigationBar, these components are likely not impacted because they automatically handle insets.
  • If your app is using Material 2 Components ( androidx.compose.material) in Compose, these components don't automatically handle insets. However, you can get access to the insets and apply them manually. In androidx.compose.material 1.6.0 and later, use the windowInsets parameter to apply the insets manually for BottomAppBar, TopAppBar, BottomNavigation, and NavigationRail. Likewise, use the contentWindowInsets parameter for Scaffold.
  • If your app uses views and Material Components (com.google.android.material), most views-based Material Components such as BottomNavigationView, BottomAppBar, NavigationRailView, or NavigationView, handle insets and require no additional work. However, you need to add android:fitsSystemWindows="true" if using AppBarLayout.
  • For custom composables, apply the insets manually as padding. If your content is within a Scaffold, you can consume insets using the Scaffold padding values. Otherwise, apply padding using one of the WindowInsets.
  • If your app is using views and BottomSheet, SideSheet or custom containers, apply padding using ViewCompat.setOnApplyWindowInsetsListener. For RecyclerView, apply padding using this listener and also add clipToPadding="false".
What to check if your app must offer custom background protection

If your app must offer custom background protection to 3-button navigation or the status bar, your app should place a composable or view behind the system bar using WindowInsets.Type#tappableElement() to get the 3-button navigation bar height or WindowInsets.Type#statusBars.

Additional edge-to-edge resources

See the Edge to Edge Views and Edge to Edge Compose guides for additional considerations on applying insets.

Deprecated APIs

The following APIs are deprecated but not disabled:

The following APIs are deprecated and disabled:

安定した構成

アプリが Android 15(API レベル 35)以降をターゲットとしている場合、Configuration はシステムバーを除外しなくなりました。レイアウト計算に Configuration クラスの画面サイズを使用する場合は、必要に応じて適切な ViewGroupWindowInsetsWindowMetricsCalculator などの優れた代替手段に置き換える必要があります。

Configuration は API 1 以降で利用できます。通常は Activity.onConfigurationChanged から取得します。ウィンドウの密度、向き、サイズなどの情報を提供します。Configuration から返されるウィンドウサイズの重要な特徴の 1 つは、以前はシステムバーが除外されていたことです。

構成サイズは通常、/res/layout-h500dp などのリソース選択に使用されます。これは引き続き有効なユースケースです。ただし、レイアウト計算に使用することは常に推奨されていません。使用している場合は、今すぐ使用を中止してください。Configuration の使用は、ユースケースに応じてより適切なものに置き換える必要があります。

レイアウトの計算に使用する場合は、CoordinatorLayoutConstraintLayout などの適切な ViewGroup を使用します。システム ナビゲーション バーの高さを決定する場合は、WindowInsets を使用します。アプリ ウィンドウの現在のサイズを確認するには、computeCurrentWindowMetrics を使用します。

この変更の影響を受けるフィールドは次のとおりです。

  • Configuration.screenWidthDp サイズと screenHeightDp サイズで、システムバーが除外されなくなりました。
  • Configuration.smallestScreenWidthDp は、screenWidthDpscreenHeightDp の変更によって間接的に影響を受けます。
  • Configuration.orientation は、ほぼ正方形のデバイスで screenWidthDpscreenHeightDp が変更された場合に間接的に影響を受けます。
  • Display.getSize(Point) は、Configuration の変更によって間接的に影響を受けます。これは API レベル 30 で非推奨になりました。
  • Display.getMetrics() は、API レベル 33 以降、すでにこのように動作しています。

elegantTextHeight 属性のデフォルトは true

Android 15(API レベル 35)をターゲットとするアプリの場合、elegantTextHeight TextView 属性はデフォルトで true になります。これにより、デフォルトで使用されるコンパクトなフォントが、読みやすく大きな縦方向の測定値を持つスクリプトに置き換えられます。コンパクト フォントは、レイアウトの分割を防ぐために導入されました。Android 13(API レベル 33)では、fallbackLineSpacing 属性を使用してテキスト レイアウトの垂直方向の高さを伸ばすことで、このような分割の多くを防ぐことができます。

Android 15 では、コンパクト フォントは引き続きシステムに残るため、アプリで elegantTextHeightfalse に設定して以前と同じ動作を実現できますが、今後のリリースでサポートされる可能性は低いです。そのため、アプリがアラビア語、ラオス語、ミャンマー語、タミル語、グジャラート語、カンナダ語、マラヤーラム語、オディア語、テルグ語、タイ語のスクリプトをサポートしている場合は、elegantTextHeighttrue に設定してアプリをテストします。

Android 14(API レベル 34)以前をターゲットとするアプリの
elegantTextHeight の動作
Android 15 をターゲットとするアプリの elegantTextHeight の動作。

複雑な文字の形状で TextView の幅が変更される

Android の以前のバージョンでは、複雑なシェーピングを持つ一部の筆記体フォントや言語では、文字が前の文字または次の文字の領域に描画されることがあります。場合によっては、このような文字の開始位置や終了位置が切り詰められていました。Android 15 以降では、TextView はこのような文字に十分なスペースを描画するための幅を割り当て、アプリがクリッピングを防ぐために左側に追加の余白をリクエストできるようにします。

この変更は TextView が幅を決定する方法に影響するため、アプリが Android 15(API レベル 35)以降をターゲットとしている場合、TextView はデフォルトでより多くの幅を割り当てます。この動作を有効または無効にするには、TextViewsetUseBoundsForWidth API を呼び出します。

左側の余白を追加すると、既存のレイアウトの位置がずれる可能性があるため、Android 15 以降をターゲットとするアプリでも、デフォルトでは余白は追加されません。ただし、setShiftDrawingOffsetForStartOverhang を呼び出すことで、クリッピングを防ぐためにパディングを追加できます。

次の例は、これらの変更によって、一部のフォントと言語のテキスト レイアウトがどのように改善されるかを示しています。

英語のテキストを筆記体フォントで表示する場合の標準レイアウト。一部の文字が切り取られている。対応する XML は次のとおりです。

<TextView
    android:fontFamily="cursive"
    android:text="java" />
同じ英語のテキストのレイアウト。幅とパディングが追加されています。対応する XML は次のとおりです。

<TextView
    android:fontFamily="cursive"
    android:text="java"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />
タイ語テキストの標準レイアウト。一部の文字が切り取られている。 対応する XML は次のとおりです。

<TextView
    android:text="คอมพิวเตอร์" />
幅とパディングを追加した、同じタイ語のテキストのレイアウト。対応する XML は次のとおりです。

<TextView
    android:text="คอมพิวเตอร์"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

言語 / 地域に応じた EditText のデフォルトの行の高さ

In previous versions of Android, the text layout stretched the height of the text to meet the line height of the font that matched the current locale. For example, if the content was in Japanese, because the line height of the Japanese font is slightly larger than the one of a Latin font, the height of the text became slightly larger. However, despite these differences in line heights, the EditText element was sized uniformly, regardless of the locale being used, as illustrated in the following image:

Three boxes representing EditText elements that can contain text from English (en), Japanese (ja), and Burmese (my). The height of the EditText is the same, even though these languages have different line heights from each other.

For apps targeting Android 15 (API level 35), a minimum line height is now reserved for EditText to match the reference font for the specified Locale, as shown in the following image:

Three boxes representing EditText elements that can contain text from English (en), Japanese (ja), and Burmese (my). The height of the EditText now includes space to accommodate the default line height for these languages' fonts.

If needed, your app can restore the previous behavior by specifying the useLocalePreferredLineHeightForMinimum attribute to false, and your app can set custom minimum vertical metrics using the setMinimumFontMetrics API in Kotlin and Java.

カメラとメディア

Android 15 では、Android 15 以降をターゲットとするアプリのカメラとメディアの動作が次のように変更されます。

音声フォーカスのリクエストに関する制限

Android 15(API レベル 35)をターゲットとするアプリが音声フォーカスをリクエストするには、最上位のアプリであるか、フォアグラウンド サービスを実行している必要があります。アプリがこれらの要件のいずれかを満たしていないときにフォーカスをリクエストしようとすると、呼び出しは AUDIOFOCUS_REQUEST_FAILED を返します。

音声フォーカスの詳細については、音声フォーカスを管理するをご覧ください。

非 SDK の制限の更新

Android 15 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 15, some of these changes might not immediately affect you. However, while it's possible for your app to access some non-SDK interfaces depending on your app's target API level, using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you can't find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

To learn more about the changes in this release of Android, see Updates to non-SDK interface restrictions in Android 15. To learn more about non-SDK interfaces generally, see Restrictions on non-SDK interfaces.