Android 14 플랫폼에는 앱에 영향을 줄 수 있는 동작 변경사항이 있습니다. targetSdkVersion
과 관계없이 Android 14에서 실행되는 모든 앱에 적용되는 동작 변경사항은 다음과 같습니다. 이러한 변경사항을 적절히 지원해야 하는 경우 앱을 테스트한 후 필요에 따라 수정해야 합니다.
또한 Android 14를 타겟팅하는 앱에만 영향을 주는 동작 변경사항 목록을 검토해야 합니다.
핵심 기능
정확한 알람 예약은 기본적으로 거부됨
Exact alarms are meant for user-intentioned notifications, or for actions that
need to happen at a precise time. Starting in Android 14, the
SCHEDULE_EXACT_ALARM
permission is no longer being pre-granted to most newly installed apps
targeting Android 13 and higher—the permission is denied by default.
Learn more about the changes to the permission for scheduling exact alarms.
앱이 캐시되는 동안 컨텍스트 등록 브로드캐스트가 대기열에 추가됨
Android 14에서 시스템은 앱이 진행되는 동안 컨텍스트 등록 브로드캐스트를 대기열에 배치합니다. 캐시된 상태입니다. 이는 Android 12(API 수준 31)에서 비동기 바인더 트랜잭션을 위해 도입한 대기열 추가 동작과 유사합니다. 매니페스트 선언 브로드캐스트는 대기열에 추가되지 않으며 앱은 브로드캐스트 전송을 위해 캐시된 상태에서 삭제됩니다.
앱이 캐시된 상태에서 나가면(예: 포그라운드로 돌아가는 경우) 시스템은 대기열에 추가된 브로드캐스트를 전송합니다. 특정 브로드캐스트의 다중 인스턴스 하나의 브로드캐스트로 병합될 수 있습니다 시스템 상태와 같은 다른 요인에 따라 앱이 캐시된 상태에서 삭제될 수 있으며 이전에 대기열에 추가된 브로드캐스트가 전송됩니다.
앱은 자체 백그라운드 프로세스만 종료할 수 있음
Starting in Android 14, when your app calls killBackgroundProcesses()
,
the API can kill only the background processes of your own app.
If you pass in the package name of another app, this method has no effect on that app's background processes, and the following message appears in Logcat:
Invalid packageName: com.example.anotherapp
Your app shouldn't use the killBackgroundProcesses()
API or otherwise attempt
to influence the process lifecycle of other apps, even on older OS versions.
Android is designed to keep cached apps in the background and kill them
automatically when the system needs memory. If your app kills other apps
unnecessarily, it can reduce system performance and increase battery consumption
by requiring full restarts of those apps later, which takes significantly more
resources than resuming an existing cached app.
MTU를 요청하는 첫 번째 GATT 클라이언트의 MTU가 517로 설정됨
Starting from Android 14, the Android Bluetooth stack more strictly adheres to
Version 5.2 of the Bluetooth Core Specification and requests
the BLE ATT MTU to 517 bytes when the first GATT client requests an MTU using
the BluetoothGatt#requestMtu(int)
API, and disregards all subsequent MTU
requests on that ACL connection.
To address this change and make your app more robust, consider the following options:
- Your peripheral device should respond to the Android device's MTU request
with a reasonable value that can be accommodated by the peripheral. The
final negotiated value will be a minimum of the Android requested value and
the remote provided value (for example,
min(517, remoteMtu)
)- Implementing this fix could require a firmware update for peripheral
- Alternatively, limit your GATT characteristic writes based on the minimum
between the known supported value of your peripheral and the received MTU
change
- A reminder that you should reduce 5 bytes from the supported size for the headers
- For example:
arrayMaxLength = min(SUPPORTED_MTU, GATT_MAX_ATTR_LEN(517)) - 5
앱이 제한된 대기 버킷에 배치될 수 있는 새로운 이유
Android 14 introduces a new reason an app can be placed into the restricted standby bucket.
The app's jobs trigger ANR errors multiple times due to onStartJob
,
onStopJob
, or onBind
method timeouts.
(See JobScheduler reinforces callback and network behavior for changes
to onStartJob
and onStopJob
.)
To track whether or not the app has entered the restricted standby bucket,
we recommend logging with the API UsageStatsManager.getAppStandbyBucket()
on job execution or UsageStatsManager.queryEventsForSelf()
on app startup.
mlock이 64KB로 제한됨
In Android 14 (API level 34) and higher, the platform reduces the maximum memory
that can be locked using mlock()
to 64 KB per process. In
previous versions, the limit was 64 MB per process. This restriction
promotes better memory management across apps and the system. To provide more
consistency across devices, Android 14 adds a new CTS test for the
new mlock()
limit on compatible devices.
시스템에서 캐시된 앱 리소스 사용 강제 적용
By design, an app's process is in a cached state when it's moved to the
background and no other app process components are running. Such an app process
is subject to being killed due to system memory pressure. Any work that
Activity
instances perform after the onStop()
method has been called and
returned, while in this state, is unreliable and strongly discouraged.
Android 14 introduces consistency and enforcement to this design. Shortly after an app process enters a cached state, background work is disallowed, until a process component re-enters an active state of the lifecycle.
Apps that use typical framework-supported lifecycle APIs – such as
services, JobScheduler
, and Jetpack WorkManager – shouldn't be
impacted by these changes.
사용자 환경
사용자가 닫을 수 없는 알림을 처리하는 방식 변경
앱에서 사용자에게 닫을 수 없는 포그라운드 알림을 표시하는 경우 Android 14에서는 사용자가 이러한 알림을 닫을 수 있도록 동작을 변경했습니다.
이 변경사항은 사용자가 포그라운드를 닫지 못하게 하는 앱에 적용됩니다.
다음을 통해 Notification.FLAG_ONGOING_EVENT
설정을 통해 알림
Notification.Builder#setOngoing(true)
또는
NotificationCompat.Builder#setOngoing(true)
: FLAG_ONGOING_EVENT
의 동작을 변경하여 사용자가 실제로 알림을 닫을 수 있도록 했습니다.
이러한 종류의 알림은 다음 조건에서 여전히 닫을 수 없습니다.
- 휴대전화가 잠겨 있을 때
- 사용자가 모든 알림 지우기 작업을 선택하는 경우(실수로 인한 닫기에 유용)
또한 이 새로운 동작은 다음 사용 사례에서 알림에 적용되지 않습니다.
CallStyle
알림- 기기 정책 컨트롤러(DPC) 및 엔터프라이즈용 지원 패키지
- 미디어 알림
- 기본 검색 선택기 패키지
데이터 보안 정보가 더 잘 보임
사용자 개인 정보 보호를 강화하기 위해 Android 14에서는 개발자가 Play Console 양식에서 선언한 정보를 시스템에서 표시하는 위치 수를 늘립니다. 현재 사용자는 Google Play의 앱 등록정보에 있는 데이터 보안 섹션에서 이 정보를 볼 수 있습니다.
앱의 위치 데이터 공유 정책을 검토하고 잠시 시간을 내어 적용되는 경우 앱의 Google Play 데이터 보안 섹션을 업데이트하시기 바랍니다.
자세한 내용은 Android 14에서 데이터 보안 정보가 더 잘 표시되게 하는 방법에 관한 가이드를 참고하세요.
접근성
비선형 글꼴 크기 200%로 조정
Android 14부터 시스템은 글꼴 크기를 최대 200%까지 지원합니다. 이를 통해 저시력 사용자에게 웹 콘텐츠 접근성 가이드라인(WCAG)에 맞는 추가 접근성 옵션을 제공할 수 있습니다.
이미 조정된 픽셀(sp) 단위를 사용하여 텍스트 크기를 정의한다면 이 변경사항은 앱에 큰 영향을 미치지 않을 것입니다. 그러나 최대 글꼴 크기(200%)를 사용 설정한 상태에서 UI 테스트를 실행하여 앱이 사용성에 영향을 미치지 않으면서 더 큰 글꼴 크기를 수용할 수 있는지 확인해야 합니다.
보안
설치 가능한 최소 대상 API 수준
Android 14부터 targetSdkVersion
이 23 미만인 앱은 설치할 수 없습니다. 앱이 이러한 최소 대상 API 수준 요구사항을 충족하게 되면 사용자의 보안 및 개인 정보 보호 기능이 개선됩니다.
멀웨어는 최신 Android 버전에 도입된 보안 및 개인 정보 보호 기능을 우회하기 위해 이전 API 수준을 타겟팅하는 경우가 많습니다. 예를 들어 일부 멀웨어 앱은 targetSdkVersion
22를 사용하여 2015년 Android 6.0 Marshmallow(API 수준 23)에서 도입된 런타임 권한 모델이 적용되지 않도록 합니다. 이번 Android 14 변경사항으로 인해 멀웨어는 보안 및 개인 정보 보호 기능 개선을 피하기가 더 어려워집니다.
더 낮은 API 수준을 타겟팅하는 앱을 설치하려고 하면 설치에 실패하고 Logcat에 다음 메시지가 표시됩니다.
INSTALL_FAILED_DEPRECATED_SDK_VERSION: App package must target at least SDK version 23, but found 7
Android 14로 업그레이드하는 기기에서는 targetSdkVersion
이 23 미만인 앱이 설치된 상태로 유지됩니다.
이전 API 수준을 타겟팅하는 앱을 테스트해야 한다면 다음 ADB 명령어를 사용합니다.
adb install --bypass-low-target-sdk-block FILENAME.apk
미디어 소유자 패키지 이름이 수정될 수 있음
The media store supports queries for the OWNER_PACKAGE_NAME
column, which
indicates the app that stored a particular media file. Starting in Android
14, this value is redacted unless at least one of the following conditions is
true:
- The app that stored the media file has a package name that is always visible to other apps.
The app that queries the media store requests the
QUERY_ALL_PACKAGES
permission.
Learn more about how Android filters package visibility for privacy purposes.