التغييرات في السلوك: التطبيقات التي تستهدف الإصدار 14 من نظام التشغيل Android أو الإصدارات الأحدث

على غرار الإصدارات السابقة، يتضمّن Android 14 تغييرات في السلوك قد تؤثّر في تطبيقك. تنطبق تغييرات السلوك التالية حصريًا على التطبيقات التي تستهدف Android 14 (المستوى 34 لواجهة برمجة التطبيقات) أو الإصدارات الأحدث. إذا كان تطبيقك يستهدف Android 14 أو الإصدارات الأحدث، عليك تعديله ليتوافق مع هذه السلوكيات بشكلٍ سليم، حيثما ينطبق ذلك.

احرص أيضًا على مراجعة قائمة تغييرات السلوك التي تؤثّر في جميع التطبيقات التي تعمل على Android 14 بغض النظر عن الخاص بالتطبيق targetSdkVersion.

الوظيفة الأساسية

أنواع الخدمات التي تعمل في المقدّمة مطلوبة

If your app targets Android 14 (API level 34) or higher, it must specify at least one foreground service type for each foreground service within your app. You should choose a foreground service type that represents your app's use case. The system expects foreground services that have a particular type to satisfy a particular use case.

If a use case in your app isn't associated with any of these types, it's strongly recommended that you migrate your logic to use WorkManager or user-initiated data transfer jobs.

فرض إذن BLUETOOTH_CONNECT في BluetoothAdapter

يفرض الإصدار 14 من نظام التشغيل Android إذن BLUETOOTH_CONNECT عند استدعاء الأسلوب BluetoothAdapter getProfileConnectionState() للتطبيقات التي تستهدف Android 14 (المستوى 34 لواجهة برمجة التطبيقات) أو الإصدارات الأحدث.

سبق أن تطلبت هذه الطريقة الحصول على إذن BLUETOOTH_CONNECT، ولكن لم يتم فرضها. تأكَّد من أنّ تطبيقك يعلن عن BLUETOOTH_CONNECT في ملف AndroidManifest.xml الخاص به كما هو موضّح في المقتطف التالي، وتحقَّق من أنّه منح المستخدم الإذن قبل استدعاء getProfileConnectionState.

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

تعديلات OpenJDK 17

يواصل نظام التشغيل Android 14 العمل على تحديث المكتبات الأساسية في Android لمواءمتها مع الميزات في أحدث إصدارات OpenJDK LTS، بما في ذلك تحديثات مكتبة ودعم لغة Java 17 لمطوّري التطبيقات والمنصات.

يمكن أن تؤثّر بعض هذه التغييرات في توافق التطبيق:

  • تغييرات على التعبيرات العادية: تم الآن منع استخدام مراجع المجموعات غير الصالحة لتتمكّن من اتّباع الدلالات في OpenJDK بشكلٍ أدق. قد تظهر لك حالات جديدة يتم فيها طرح IllegalArgumentException من فئة java.util.regex.Matcher، لذا احرص على اختبار تطبيقك في المناطق التي تستخدم التعبيرات العادية. لتفعيل هذا التغيير أو إيقافه أثناء الاختبار، بدِّل العلامة DISALLOW_INVALID_GROUP_REFERENCE باستخدام أدوات إطار العمل المعني بالتوافق.
  • معالجة معرّف UUID: تُجري طريقة java.util.UUID.fromString() الآن عمليات تحقّق أكثر صرامة عند التحقّق من مَعلمة الإدخال، لذا قد يظهر لك IllegalArgumentException أثناء تحويل البيانات إلى نص. لتفعيل هذا التغيير أو إيقافه أثناء الاختبار، بدِّل العلامة ENABLE_STRICT_VALIDATION باستخدام أدوات إطار العمل المعني بالتوافق.
  • مشاكل ProGuard: في بعض الحالات، تؤدي إضافة فئة java.lang.ClassValue إلى حدوث مشكلة إذا حاولت تصغير تطبيقك وتشويشه وتحسينه باستخدام ProGuard. تنشأ المشكلة من مكتبة Kotlin التي تغيّر سلوك وقت التشغيل استنادًا إلى ما إذا كانت Class.forName("java.lang.ClassValue") تُرجع فئة أم لا. إذا تم تطوير تطبيقك باستخدام إصدار قديم من وقت التشغيل بدون توفّر فئة java.lang.ClassValue، قد تؤدي عمليات التحسين هذه إلى إزالة طريقة computeValue من الفئات المشتقة من java.lang.ClassValue.

تعزيز JobScheduler لسلوك معاودة الاتصال والشبكة

تتوقع أداة Jobscheduler منذ إطلاقها أن يعود تطبيقك onStartJob أو onStopJob خلال بضع ثوانٍ. قبل Android 14، إذا كانت المهمة تستغرق وقتًا طويلاً، يتم إيقاف المهمة وتفشل تلقائيًا. إذا كان تطبيقك يستهدف الإصدار 14 من نظام التشغيل Android (المستوى 34 لواجهة برمجة التطبيقات) أو إصدارًا أحدث وتجاوز المدّة الممنوحة في سلسلة المهام الرئيسية، سيُنشئ التطبيق خطأ ANR مع رسالة الخطأ "ما مِن استجابة لـ onStartJob" أو "ما مِن استجابة لـ onStopJob".

قد يكون خطأ ANR هذا نتيجة لأحد السيناريوهَين التاليَين: 1. هناك عمل يحظر سلسلة المحادثات الرئيسية، ما يمنع عمليات معاودة الاتصال onStartJob. أو onStopJob من التنفيذ والإكمال خلال المهلة الزمنية المتوقّعة. 2. ينفِّذ المطوّر عمل حظر ضمن Job Scheduler استدعاء onStartJob أو onStopJob، ما يمنع معاودة الاتصال من لإنجازها خلال الحد الزمني المتوقع.

لمعالجة رقم 1، عليك إجراء المزيد من تصحيح الأخطاء التي تمنع سلسلة التعليمات الرئيسية. عند حدوث خطأ ANR، يمكنك القيام بذلك باستخدام ApplicationExitInfo#getTraceInputStream() للحصول على شاهد القبر وتتبع حدوث خطأ ANR. إذا كان بإمكانك إعادة إنتاج خطأ ANR يدويًا، يمكنك تسجيل تتبُّع للنظام وفحص التتبُّع باستخدام Android Studio أو Perfetto لفهم ما الذي يتم تشغيله في الخيط الرئيسي عند حدوث خطأ ANR بشكل أفضل. يُرجى العِلم أنّ هذا يمكن أن يحدث عند استخدام واجهة برمجة التطبيقات Jobscheduler API مباشرةً. أو استخدام WorkManager لمكتبة androidx.

لمعالجة رقم 2، ننصحك بإجراء عملية النقل إلى WorkManager، التي توفّر توفير إمكانية إكمال أي معالجة في onStartJob أو onStopJob في سلسلة محادثات غير متزامنة.

تفرض JobScheduler أيضًا شرطًا للإفصاح عن الإذن ACCESS_NETWORK_STATE في حال استخدام قيد setRequiredNetworkType أو setRequiredNetwork. إذا لم يفصح تطبيقك عن الحصول على إذن "ACCESS_NETWORK_STATE" عند تحديد موعد المهمة وتحديد الاستهداف الإصدار 14 من نظام التشغيل Android أو الإصدارات الأحدث، سيؤدي إلى حدوث SecurityException.

واجهة برمجة التطبيقات لتشغيل مربّعات التطبيقات

For apps targeting 14 and higher, TileService#startActivityAndCollapse(Intent) is deprecated and now throws an exception when called. If your app launches activities from tiles, use TileService#startActivityAndCollapse(PendingIntent) instead.

الخصوصية

الوصول الجزئي إلى الصور والفيديوهات

Android 14 introduces Selected Photos Access, which allows users to grant apps access to specific images and videos in their library, rather than granting access to all media of a given type.

This change is only enabled if your app targets Android 14 (API level 34) or higher. If you don't use the photo picker yet, we recommend implementing it in your app to provide a consistent experience for selecting images and videos that also enhances user privacy without having to request any storage permissions.

If you maintain your own gallery picker using storage permissions and need to maintain full control over your implementation, adapt your implementation to use the new READ_MEDIA_VISUAL_USER_SELECTED permission. If your app doesn't use the new permission, the system runs your app in a compatibility mode.

تجربة المستخدم

الإشعارات الآمنة بملء الشاشة من خلال Intent

With Android 11 (API level 30), it was possible for any app to use Notification.Builder.setFullScreenIntent to send full-screen intents while the phone is locked. You could auto-grant this on app install by declaring USE_FULL_SCREEN_INTENT permission in the AndroidManifest.

Full-screen intent notifications are designed for extremely high-priority notifications demanding the user's immediate attention, such as an incoming phone call or alarm clock settings configured by the user. For apps targeting Android 14 (API level 34) or higher, apps that are allowed to use this permission are limited to those that provide calling and alarms only. The Google Play Store revokes default USE_FULL_SCREEN_INTENT permissions for any apps that don't fit this profile. The deadline for these policy changes is May 31, 2024.

This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.

You can use the new API NotificationManager.canUseFullScreenIntent to check if your app has the permission; if not, your app can use the new intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT to launch the settings page where users can grant the permission.

الأمان

قيود على النوايا الضمنية والمعلّقة

For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:

  • Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
  • If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.

These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.

For example, here is an intent filter that could be declared in your app's manifest file:

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

If your app tried to launch this activity using an implicit intent, an ActivityNotFoundException exception would be thrown:

Kotlin

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

To launch the non-exported activity, your app should use an explicit intent instead:

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

على مستقبِلات البث المسجّلة في وقت التشغيل تحديد سلوك التصدير

على التطبيقات والخدمات التي تستهدف الإصدار 14 من نظام التشغيل Android (المستوى 34 لواجهة برمجة التطبيقات) أو الإصدارات الأحدث وتستخدم مستقبلات مسجّلة في السياق تحديد علامة للإشارة إلى ما إذا كان يجب تصدير المستقبل إلى جميع التطبيقات الأخرى على الجهاز أم لا: إما RECEIVER_EXPORTED أو RECEIVER_NOT_EXPORTED، على التوالي. يساعد هذا الشرط في حماية التطبيقات من الثغرات الأمنية من خلال الاستفادة من ميزات هذه الأجهزة المستلِمة التي تم تقديمها في Android 13.

استثناء لأجهزة الاستقبال التي تتلقّى عمليات بث النظام فقط

إذا كان تطبيقك يسجِّل جهاز استقبال فقط لتلقّي عمليات بث النظام من خلال Context#registerReceiver طُرق، مثل Context#registerReceiver()، يجب عدم تحديد علامة عند تسجيل جهاز الاستقبال.

تحميل أكثر أمانًا للرمز البرمجي الديناميكي

If your app targets Android 14 (API level 34) or higher and uses Dynamic Code Loading (DCL), all dynamically-loaded files must be marked as read-only. Otherwise, the system throws an exception. We recommend that apps avoid dynamically loading code whenever possible, as doing so greatly increases the risk that an app can be compromised by code injection or code tampering.

If you must dynamically load code, use the following approach to set the dynamically-loaded file (such as a DEX, JAR, or APK file) as read-only as soon as the file is opened and before any content is written:

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

Handle dynamically-loaded files that already exist

To prevent exceptions from being thrown for existing dynamically-loaded files, we recommend deleting and recreating the files before you try to dynamically load them again in your app. As you recreate the files, follow the preceding guidance for marking the files read-only at write time. Alternatively, you can re-label the existing files as read-only, but in this case, we strongly recommend that you verify the integrity of the files first (for example, by checking the file's signature against a trusted value), to help protect your app from malicious actions.

قيود إضافية على بدء الأنشطة من الخلفية

For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:

These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.

ثغرة path traversal في ملفات Zip

For apps targeting Android 14 (API level 34) or higher, Android prevents the Zip Path Traversal Vulnerability in the following way: ZipFile(String) and ZipInputStream.getNextEntry() throws a ZipException if zip file entry names contain ".." or start with "/".

Apps can opt-out from this validation by calling dalvik.system.ZipPathValidator.clearCallback().

For apps targeting Android 14 (API level 34) or higher, a SecurityException is thrown by MediaProjection#createVirtualDisplay in either of the following scenarios:

Your app must ask the user to give consent before each capture session. A single capture session is a single invocation on MediaProjection#createVirtualDisplay, and each MediaProjection instance must be used only once.

Handle configuration changes

If your app needs to invoke MediaProjection#createVirtualDisplay to handle configuration changes (such as the screen orientation or screen size changing), you can follow these steps to update the VirtualDisplay for the existing MediaProjection instance:

  1. Invoke VirtualDisplay#resize with the new width and height.
  2. Provide a new Surface with the new width and height to VirtualDisplay#setSurface.

Register a callback

Your app should register a callback to handle cases where the user doesn't grant consent to continue a capture session. To do this, implement Callback#onStop and have your app release any related resources (such as the VirtualDisplay and Surface).

If your app doesn't register this callback, MediaProjection#createVirtualDisplay throws an IllegalStateException when your app invokes it.

قيود محدَّثة على واجهات برمجة التطبيقات غير التابعة لحزمة تطوير البرامج (SDK)

يتضمّن الإصدار 14 من Android قوائم معدَّلة لواجهات غير SDK المحظورة استنادًا إلى التعاون مع مطوّري Android وأحدث الاختبارات الداخلية. نحرص قدر الإمكان على توفير بدائل عامة قبل حظر واجهات غير SDK.

إذا كان تطبيقك لا يستهدف الإصدار 14 من Android، قد لا تؤثر بعض هذه التغييرات فيك على الفور. ومع ذلك، على الرغم من أنّه يمكنك حاليًا استخدام بعض واجهات غير SDK (اعتمادًا على مستوى واجهة برمجة التطبيقات المستهدَف في تطبيقك)، فإنّ استخدام أي طريقة أو حقل غير SDK يحمل دائمًا خطرًا كبيرًا بتعطُّل تطبيقك.

إذا لم تكن متأكدًا مما إذا كان تطبيقك يستخدم واجهات غير SDK، يمكنك اختبار تطبيقك لمعرفة ذلك. إذا كان تطبيقك يعتمد على واجهات غير SDK، عليك البدء في التخطيط لنقله إلى بدائل SDK. ومع ذلك، ندرك أنّ بعض التطبيقات لديها حالات استخدام صالحة لاستخدام واجهات غير SDK. إذا لم تتمكّن من العثور على بديل لاستخدام واجهة غير SDK لميزة في تطبيقك، عليك طلب واجهة برمجة تطبيقات عامة جديدة.

لمزيد من المعلومات عن التغييرات في هذا الإصدار من Android، اطّلِع على تعديلات على القيود المفروضة على الواجهات غير المستندة إلى حزمة SDK في Android 14. للاطّلاع على مزيد من المعلومات حول الواجهات غير المتوفرة في حزمة SDK بشكل عام، اطّلِع على مقالة القيود المفروضة على الواجهات غير المتوفرة في حزمة SDK.