動作の変更点: Android 16 以上をターゲットとするアプリ

これまでのリリースと同様、Android 16 には、アプリに影響する可能性がある動作変更が含まれています。下記の動作変更は、Android 16 以上をターゲットとするアプリにのみ適用されます。アプリが Android 16 以上をターゲットとする場合は、必要に応じてアプリを変更し、下記の動作に対応できるようにしてください。

アプリの targetSdkVersion に関係なく、Android 16 で実行されるすべてのアプリに影響する動作変更のリストも必ずご確認ください。

ユーザー エクスペリエンスとシステム UI

Android 16(API レベル 36)には、より一貫性のある直感的なユーザー エクスペリエンスを実現するための以下の変更が含まれています。

エッジ ツー エッジのオプトアウトの廃止

Android 15 では、Android 15(API レベル 35)をターゲットとするアプリに対してエッジ ツー エッジが強制適用されましたが、R.attr#windowOptOutEdgeToEdgeEnforcementtrue に設定することで、アプリはエッジ ツー エッジを無効にできます。Android 16(API レベル 36)をターゲットとするアプリの場合、R.attr#windowOptOutEdgeToEdgeEnforcement は非推奨となり無効化されます。アプリでエッジ ツー エッジをオプトアウトすることはできません。

  • アプリが Android 16(API レベル 36)をターゲットとしており、Android 15 デバイスで実行されている場合、R.attr#windowOptOutEdgeToEdgeEnforcement は引き続き動作します。
  • アプリが Android 16(API レベル 36)をターゲットとしており、Android 16 デバイスで実行されている場合、R.attr#windowOptOutEdgeToEdgeEnforcement は無効になります。

Android 16 でテストする場合は、アプリがエッジ ツー エッジに対応していることを確認し、R.attr#windowOptOutEdgeToEdgeEnforcement の使用をすべて削除して、Android 15 デバイスでもエッジ ツー エッジに対応するようにします。エッジ ツー エッジをサポートするには、ComposeViews のガイダンスをご覧ください。

予測型「戻る」には移行またはオプトアウトが必要

For apps targeting Android 16 (API level 36) or higher and running on an Android 16 or higher device, the predictive back system animations (back-to-home, cross-task, and cross-activity) are enabled by default. Additionally, onBackPressed is not called and KeyEvent.KEYCODE_BACK is not dispatched anymore.

If your app intercepts the back event and you haven't migrated to predictive back yet, update your app to use supported back navigation APIs, or temporarily opt out by setting the android:enableOnBackInvokedCallback attribute to false in the <application> or <activity> tag of your app's AndroidManifest.xml file.

The predictive back-to-home animation.
The predictive cross-activity animation.
The predictive cross-task animation.

Elegant font API のサポート終了と無効化

Apps targeting Android 15 (API level 35) have the elegantTextHeight TextView attribute set to true by default, replacing the compact font with one that is much more readable. You could override this by setting the elegantTextHeight attribute to false.

Android 16 deprecates the elegantTextHeight attribute, and the attribute will be ignored once your app targets Android 16. The "UI fonts" controlled by these APIs are being discontinued, so you should adapt any layouts to ensure consistent and future proof text rendering in Arabic, Lao, Myanmar, Tamil, Gujarati, Kannada, Malayalam, Odia, Telugu or Thai.

elegantTextHeight behavior for apps targeting Android 14 (API level 34) and lower, or for apps targeting Android 15 (API level 35) that overrode the default by setting the elegantTextHeight attribute to false.
elegantTextHeight behavior for apps targeting Android 16 (API level 36), or for apps targeting Android 15 (API level 35) that didn't override the default by setting the elegantTextHeight attribute to false.

コア機能

Android 16(API レベル 36)には、Android システムのさまざまなコア機能を変更または拡張する以下の変更が含まれています。

固定レートの作業スケジュールの最適化

Android 16 をターゲットとする前は、scheduleAtFixedRate が有効なプロセス ライフサイクルの外部にあるためにタスクの実行を逃した場合、アプリが有効なライフサイクルに戻ると、逃した実行がすべて直ちに実行されました。

Android 16 をターゲットとしている場合、アプリが有効なライフサイクルに戻ると、scheduleAtFixedRate の実行が最大 1 回スキップされた場合、その実行が直ちに実行されます。この動作変更により、アプリのパフォーマンスが向上することが期待されます。アプリでこの動作をテストして、アプリが影響を受けているかどうかを確認します。アプリ互換性フレームワークを使用して STPE_SKIP_MULTIPLE_MISSED_PERIODIC_TASKS 互換性フラグを有効にしてテストすることもできます。

デバイスのフォーム ファクタ

Android 16(API レベル 36)では、大画面デバイスに表示されるアプリに対して次の変更が加えられています。

アダプティブ レイアウト

With Android apps now running on a variety of devices (such as phones, tablets, foldables, desktops, cars, and TVs) and windowing modes on large screens (such as split screen and desktop windowing), developers should build Android apps that adapt to any screen and window size, regardless of device orientation. Paradigms like restricting orientation and resizability are too restrictive in today's multidevice world.

Ignore orientation, resizability, and aspect ratio restrictions

For apps targeting Android 16 (API level 36), Android 16 includes changes to how the system manages orientation, resizability, and aspect ratio restrictions. On displays with smallest width >= 600dp, the restrictions no longer apply. Apps also fill the entire display window, regardless of aspect ratio or a user's preferred orientation, and pillarboxing isn't used.

This change introduces a new standard platform behavior. Android is moving toward a model where apps are expected to adapt to various orientations, display sizes, and aspect ratios. Restrictions like fixed orientation or limited resizability hinder app adaptability, so we recommend making your app adaptive to deliver the best possible user experience.

You can also test this behavior by using the app compatibility framework and enabling the UNIVERSAL_RESIZABLE_BY_DEFAULT compat flag.

Common breaking changes

Ignoring orientation, resizability, and aspect ratio restrictions might impact your app's UI on some devices, especially elements that were designed for small layouts locked in portrait orientation: for example, issues like stretched layouts and off-screen animations and components. Any assumptions about aspect ratio or orientation can cause visual issues with your app. Learn more about how to avoid them and improve your app's adaptive behaviour.

Allowing device rotation results in more activity re-creation, which can result in losing user state if not properly preserved. Learn how to correctly save UI state in Save UI states.

Implementation details

The following manifest attributes and runtime APIs are ignored across large screen devices in full-screen and multi-window modes:

The following values for screenOrientation, setRequestedOrientation(), and getRequestedOrientation() are ignored:

  • portrait
  • reversePortrait
  • sensorPortrait
  • userPortrait
  • landscape
  • reverseLandscape
  • sensorLandscape
  • userLandscape

Regarding display resizability, android:resizeableActivity="false", android:minAspectRatio, and android:maxAspectRatio have no effect.

For apps targeting Android 16 (API level 36), app orientation, resizability, and aspect ratio constraints are ignored on large screens by default, but every app that isn't fully ready can temporarily override this behavior by opting out (which results in the previous behavior of being placed in compatibility mode).

Exceptions

The Android 16 orientation, resizability, and aspect ratio restrictions don't apply in the following situations:

  • Games (based on the android:appCategory flag)
  • Users explicitly opting in to the app's default behavior in aspect ratio settings of the device
  • Screens that are smaller than sw600dp

Opt out temporarily

To opt out a specific activity, declare the PROPERTY_COMPAT_ALLOW_RESTRICTED_RESIZABILITY manifest property:

<activity ...>
  <property android:name="android.window.PROPERTY_COMPAT_ALLOW_RESTRICTED_RESIZABILITY" android:value="true" />
  ...
</activity>

If too many parts of your app aren't ready for Android 16, you can opt out completely by applying the same property at the application level:

<application ...>
  <property android:name="android.window.PROPERTY_COMPAT_ALLOW_RESTRICTED_RESIZABILITY" android:value="true" />
</application>

健康&フィットネス

Android 16(API レベル 36)では、健康とフィットネスに関するデータについて以下の変更が加えられています。

健康とフィットネスの権限

Android 16(API レベル 36)以上をターゲットとするアプリの場合、BODY_SENSORS 権限は android.permissions.health の下にあるより細かい権限を使用します。これは ヘルスコネクトでも使用されます。Android 16 以降、これまで BODY_SENSORS または BODY_SENSORS_BACKGROUND を必要としていた API はすべて、対応する android.permissions.health 権限が必要となります。これは、次のデータ型、API、フォアグラウンド サービス タイプに影響します。

アプリでこれらの API を使用する場合は、それぞれの詳細な権限をリクエストする必要があります。

これらの権限は、健康、フィットネス、ウェルネスのデータ用の Android データストアである ヘルスコネクトからのデータ読み取りへのアクセスを保護する権限と同じです。

モバイルアプリ

READ_HEART_RATE やその他のきめ細かい権限を使用するように移行するモバイルアプリは、アプリのプライバシー ポリシーを表示するためにアクティビティを宣言する必要もあります。これはヘルスコネクトと同じ要件です。

接続

Android 16(API レベル 36)では、周辺機器との接続性を改善するために、Bluetooth スタックに次の変更が加えられています。

ボンドの損失と暗号化の変更を処理する新しいインテント

As part of the Improved bond loss handling, Android 16 also introduces 2 new intents to provide apps with greater awareness of bond loss and encryption changes.

Apps targeting Android 16 can now:

  • Receive an ACTION_KEY_MISSING intent when remote bond loss is detected, allowing them to provide more informative user feedback and take appropriate actions.
  • Receive an ACTION_ENCRYPTION_CHANGE intent whenever encryption status of the link changes. This includes encryption status change, encryption algorithm change, and encryption key size change. Apps must consider the bond restored if the link is successfully encrypted upon receiving ACTION_ENCRYPTION_CHANGE intent later.

Adapting to varying OEM implementations

While Android 16 introduces these new intents, their implementation and broadcasting can vary across different device manufacturers (OEMs). To ensure your app provides a consistent and reliable experience across all devices, developers should design their bond loss handling to gracefully adapt to these potential variations.

We recommend the following app behaviors:

  • If the ACTION_KEY_MISSING intent is broadcast:

    The ACL (Asynchronous Connection-Less) link will be disconnected by the system, but the bond information for the device will be retained (as described here).

    Your app should use this intent as the primary signal for bond loss detection and guiding the user to confirm the remote device is in range before initiating device forgetting or re-pairing.

    If a device disconnects after ACTION_KEY_MISSING is received, your app should be cautious about reconnecting, as the device may no longer be bonded with the system.

  • If the ACTION_KEY_MISSING intent is NOT broadcast:

    The ACL link will remain connected, and the bond information for the device will be removed by the system, same to behavior in Android 15.

    In this scenario, your app should continue its existing bond loss handling mechanisms as in previous Android releases, to detect and manage bond loss events.

Bluetooth のペア設定を削除する新しい方法

Android 16 をターゲットとするすべてのアプリで、CompanionDeviceManager の公開 API を使用して Bluetooth デバイスのペア設定を解除できるようになりました。コンパニオン デバイスが CDM の関連付けとして管理されている場合、アプリは、関連付けられたデバイスで新しい removeBond(int) API を使用して、Bluetooth の接続解除をトリガーできます。アプリは、Bluetooth デバイスのブロードキャスト イベント ACTION_BOND_STATE_CHANGED をリッスンすることで、ボンディング状態の変化をモニタリングできます。

セキュリティ

Android 16(API レベル 36)では、セキュリティが次のように変更されています。

MediaStore バージョンのロックダウン

Android 16 以降をターゲットとするアプリの場合、MediaStore#getVersion() はアプリごとに一意になります。これにより、バージョン文字列から識別プロパティが削除され、フィンガープリント手法の不正使用と使用が防止されます。アプリでは、このバージョンの形式について前提条件を設定しないでください。アプリは、この API を使用する際にバージョンの変更をすでに処理している必要があります。ほとんどの場合、デベロッパーがこの API の対象範囲を超える追加情報を推測しようとしない限り、現在の動作を変更する必要はありません。

Safer Intents

Safer Intents 機能は、Android のインテント解決メカニズムのセキュリティを強化するために設計された多段階のセキュリティ イニシアチブです。この目標は、インテント処理中にチェックを追加し、特定の条件を満たさないインテントをフィルタすることで、アプリを悪意のあるアクションから保護することです。

Android 15 では、この機能は送信側アプリに重点が置かれていましたが、Android 16 では受信側アプリに制御が移り、デベロッパーはアプリ マニフェストを使用して厳格なインテント解決をオプトインできるようになります。

次の 2 つの主な変更が実施されます。

  1. 明示的インテントはターゲット コンポーネントのインテント フィルタと一致する必要がある: インテントがコンポーネントを明示的にターゲットにしている場合、そのコンポーネントのインテント フィルタと一致する必要があります。

  2. アクションのないインテントはインテント フィルタに一致しない: アクションが指定されていないインテントは、インテント フィルタに解決されるべきではありません。

これらの変更は、複数のアプリが関与している場合にのみ適用され、単一のアプリ内のインテント処理には影響しません。

影響

オプトイン方式であるため、デベロッパーはアプリ マニフェストで明示的に有効にしなければなりません。そのため、この機能の影響は、デベロッパーが次の条件を満たすアプリに限定されます。

  • Safer Intents 機能とそのメリットを理解している。
  • より厳格なインテント処理方法をアプリに組み込むことを積極的に選択する。

このオプトイン アプローチにより、現在の安全性の低いインテント解決動作に依存している可能性のある既存のアプリが破損するリスクを最小限に抑えることができます。

Android 16 での初期の影響は限定的かもしれませんが、Safer Intents イニシアチブには、今後の Android リリースでより広範な影響を与えるためのロードマップがあります。最終的には、厳密なインテント解決をデフォルトの動作にする予定です。

Safer Intents 機能は、悪意のあるアプリがインテント解決メカニズムの脆弱性を悪用することを困難にすることで、Android エコシステムのセキュリティを大幅に強化する可能性があります。

ただし、既存のアプリとの互換性の問題に対処するため、オプトアウトへの移行と強制適用は慎重に管理する必要があります。

実装

デベロッパーは、アプリのマニフェストで intentMatchingFlags 属性を使用して、より厳密なインテント マッチングを明示的に有効にする必要があります。アプリ全体で機能をオプトインし、レシーバで無効化/オプトアウトする例を次に示します。

<application android:intentMatchingFlags="enforceIntentFilter">
    <receiver android:name=".MyBroadcastReceiver" android:exported="true" android:intentMatchingFlags="none">
        <intent-filter>
            <action android:name="com.example.MY_CUSTOM_ACTION" />
        </intent-filter>
        <intent-filter>
            <action android:name="com.example.MY_ANOTHER_CUSTOM_ACTION" />
        </intent-filter>
    </receiver>
</application>

サポートされているフラグの詳細:

フラグ名 説明
enforceIntentFilter 受信インテントに対してより厳密なマッチングを適用します
なし 受信インテントの特別な照合ルールをすべて無効にします。複数のフラグを指定した場合、競合する値は「なし」フラグを優先することで解決されます。
allowNullAction 一致ルールを緩和して、アクションのないインテントを一致させます。特定の動作を実現するために「enforceIntentFilter」と組み合わせて使用されるフラグ

テストとデバッグ

適用が有効になっている場合、インテント呼び出し元がインテントを適切に設定していれば、アプリは正しく機能します。ただし、ブロックされたインテントは、タグ "PackageManager." を含む "Intent does not match component's intent filter:""Access blocked:" などの警告ログメッセージをトリガーします。これは、アプリに影響する可能性のある問題を示しており、注意が必要です。

Logcat フィルタ:

tag=:PackageManager & (message:"Intent does not match component's intent filter:" | message: "Access blocked:")

プライバシー

Android 16(API レベル 36)では、プライバシーが次のように変更されています。

ローカル ネットワークへのアクセス権

Devices on the LAN can be accessed by any app that has the INTERNET permission. This makes it easy for apps to connect to local devices but it also has privacy implications such as forming a fingerprint of the user, and being a proxy for location.

The Local Network Protections project aims to protect the user's privacy by gating access to the local network behind a new runtime permission.

Release plan

This change will be deployed between two releases, 25Q2 and TBD respectively. It is imperative that developers follow this guidance for 25Q2 and share feedback because these protections will be enforced at a later Android release. Moreover, they will need to update scenarios which depend on implicit local network access by using the following guidance and prepare for user rejection and revocation of the new permission.

Impact

At the current stage, LNP is an opt-in feature which means only the apps that opt in will be affected. The goal of the opt-in phase is for app developers to understand which parts of their app depend on implicit local network access such that they can prepare to permission guard them for the next release.

Apps will be affected if they access the user's local network using:

  • Direct or library use of raw sockets on local network addresses (e.g. mDNS or SSDP service discovery protocol)
  • Use of framework level classes that access the local network (e.g. NsdManager)

Traffic to and from a local network address requires local network access permission. The following table lists some common cases:

App Low Level Network Operation Local Network Permission Required
Making an outgoing TCP connection yes
Accepting incoming TCP connections yes
Sending a UDP unicast, multicast, broadcast yes
Receiving an incoming UDP unicast, multicast, broadcast yes

These restrictions are implemented deep in the networking stack, and thus they apply to all networking APIs. This includes sockets created in native or managed code, networking libraries like Cronet and OkHttp, and any APIs implemented on top of those. Trying to resolve services on the local network (i.e. those with a .local suffix) will require local network permission.

Exceptions to the rules above:

  • If a device's DNS server is on a local network, traffic to or from it (at port 53) doesn't require local network access permission.
  • Applications using Output Switcher as their in-app picker won't need local network permissions (more guidance to come in 2025Q4).

Developer Guidance (Opt-in)

To opt into local network restrictions, do the following:

  1. Flash the device to a build with 25Q2 Beta 3 or later.
  2. Install the app to be tested.
  3. Toggle the Appcompat flag in adb:

    adb shell am compat enable RESTRICT_LOCAL_NETWORK <package_name>
    
  4. Reboot The device

Now your app's access to the local network is restricted and any attempt to access the local network will lead to socket errors. If you are using APIs that perform local network operations outside of your app process (ex: NsdManager), they won't be impacted during the opt-in phase.

To restore access, you must grant your app permission to NEARBY_WIFI_DEVICES.

  1. Ensure the app declares the NEARBY_WIFI_DEVICES permission in its manifest.
  2. Go to Settings > Apps > [Application Name] > Permissions > Nearby devices > Allow.

Now your app's access to the local network should be restored and all your scenarios should work as they did prior to opting the app in.

Once enforcement for local network protection begins, here is how the app network traffic will be impacted.

Permission Outbound LAN Request Outbound/Inbound Internet Request Inbound LAN Request
Granted Works Works Works
Not Granted Fails Works Fails

Use the following command to toggle-off the App-Compat flag

adb shell am compat disable RESTRICT_LOCAL_NETWORK <package_name>

Errors

Errors arising from these restrictions will be returned to the calling socket whenever it invokes send or a send variant to a local network address.

Example errors:

sendto failed: EPERM (Operation not permitted)

sendto failed: ECONNABORTED (Operation not permitted)

Local Network Definition

A local network in this project refers to an IP network that utilizes a broadcast-capable network interface, such as Wi-Fi or Ethernet, but excludes cellular (WWAN) or VPN connections.

The following are considered local networks:

IPv4:

  • 169.254.0.0/16 // Link Local
  • 100.64.0.0/10 // CGNAT
  • 10.0.0.0/8 // RFC1918
  • 172.16.0.0/12 // RFC1918
  • 192.168.0.0/16 // RFC1918

IPv6:

  • Link-local
  • Directly-connected routes
  • Stub networks like Thread
  • Multiple-subnets (TBD)

Additionally, both multicast addresses (224.0.0.0/4, ff00::/8) and the IPv4 broadcast address (255.255.255.255) are classified as local network addresses.

アプリ所有の写真

When prompted for photo and video permissions by an app targeting SDK 36 or higher on devices running Android 16 or higher, users who choose to limit access to selected media will see any photos owned by the app pre-selected in the photo picker. Users can deselect any of these pre-selected items, which will revoke the app's access to those photos and videos.