行为变更：以 Android 15 或更高版本为目标平台的应用

与之前的版本一样，Android 15 包含一些可能会影响您的应用的行为变更。以下行为变更仅影响以 Android 15 或更高版本为目标平台的应用。如果您的应用以 Android 15 或更高版本为目标平台，您应该修改自己的应用以适当地支持这些行为（如果适用）。

请务必查看对 Android 15 上运行的所有应用都有影响的行为变更列表（无论应用的 targetSdkVersion 如何）。

核心功能

Android 15 修改或扩展了 Android 系统的各种核心功能。

前台服务变更

We are making the following changes to foreground services with Android 15.

• Data sync foreground service timeout behavior
• New media processing foreground service type
• Restrictions on BOOT_COMPLETED broadcast receivers launching foreground services
• Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW permission

Data sync foreground service timeout behavior

Android 15 introduces a new timeout behavior to dataSync for apps targeting Android 15 (API level 35) or higher. This behavior also applies to the new mediaProcessing foreground service type.

The system permits an app's dataSync services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). When Service.onTimeout() is called, the service is no longer considered a foreground service. If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"

To avoid problems with this behavior change, you can do one or more of the following:

1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
2. Make sure your app's dataSync services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
3. Only start dataSync foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
4. Instead of using a dataSync foreground service, use an alternative API.

If your app's dataSync foreground services have run for 6 hours in the last 24, you cannot start another dataSync foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another dataSync foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type dataSync".

Testing

To test your app's behavior, you can enable data sync timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds

New media processing foreground service type

Android 15 引入了一种新的前台服务类型 mediaProcessing。此服务类型适用于转码媒体文件等操作。例如，媒体应用可能会下载音频文件，并需要先将其转换为其他格式，然后才能播放。您可以使用 mediaProcessing 前台服务，确保即使应用在后台运行时转换也会继续。

系统允许应用的 mediaProcessing 服务在 24 小时内总共运行 6 小时，之后系统会调用正在运行的服务的 Service.onTimeout(int, int) 方法（在 Android 15 中引入）。此时，服务有几秒钟的时间来调用 Service.stopSelf()。如果服务未调用 Service.stopSelf()，系统会抛出内部异常。系统会在 Logcat 中记录此异常，并显示以下消息：

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"

为避免出现此异常，您可以执行以下任一操作：

1. 让您的服务实现新的 Service.onTimeout(int, int) 方法。当您的应用收到回调时，请务必在几秒钟内调用 stopSelf()。（如果您未立即停止应用，系统会生成失败情况。）
2. 确保应用的 mediaProcessing 服务在任何 24 小时内总运行时间不超过 6 小时（除非用户与应用互动，重置计时器）。
3. 仅在有直接用户互动时启动 mediaProcessing 前台服务；由于服务启动时应用位于前台，因此您的服务在应用进入后台后有完整的 6 小时时间。
4. 请改用 替代 API（例如 WorkManager），而不是使用 mediaProcessing 前台服务。

如果您的应用的 mediaProcessing 前台服务在过去 24 小时内运行了 6 小时，则您无法启动其他 mediaProcessing 前台服务，除非用户将您的应用切换到前台（这会重置计时器）。如果您尝试启动另一个 mediaProcessing 前台服务，系统会抛出 ForegroundServiceStartNotAllowedException，并显示类似于“前台服务类型 mediaProcessing 的时间限制已用尽”的错误消息。

如需详细了解 mediaProcessing 服务类型，请参阅 Android 15 前台服务类型变更：媒体处理。

测试

如需测试应用的行为，您可以启用媒体处理超时，即使您的应用并非以 Android 15 为目标平台也是如此（前提是应用在 Android 15 设备上运行）。如需启用超时，请运行以下 adb 命令：

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

您还可以调整超时期限，以便更轻松地测试应用在达到上限时的行为方式。如需设置新的超时期限，请运行以下 adb 命令：

adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds

Restrictions on BOOT_COMPLETED broadcast receivers launching foreground services

There are new restrictions on BOOT_COMPLETED broadcast receivers launching foreground services. BOOT_COMPLETED receivers are not allowed to launch the following types of foreground services:

• dataSync
• camera
• mediaPlayback
• phoneCall
• mediaProjection
• microphone (this restriction has been in place for microphone since Android 14)

If a BOOT_COMPLETED receiver tries to launch any of those types of foreground services, the system throws ForegroundServiceStartNotAllowedException.

Testing

To test your app's behavior, you can enable these new restrictions even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). Run the following adb command:

adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name

To send a BOOT_COMPLETED broadcast without restarting the device, run the following adb command:

adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name

Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW permission

以前，如果应用拥有 SYSTEM_ALERT_WINDOW 权限，即使应用当前在后台运行，也可以启动前台服务（如免于后台启动限制中所述）。

如果应用以 Android 15 为目标平台，则此豁免范围现在更窄。现在，应用需要具有 SYSTEM_ALERT_WINDOW 权限，并且还需要有一个可见的叠加窗口。也就是说，应用需要先启动 TYPE_APPLICATION_OVERLAY 窗口，并且该窗口需要处于可见状态，然后您才能启动前台服务。

如果您的应用尝试从后台启动前台服务，但不符合这些新要求（并且没有其他豁免情况），系统会抛出 ForegroundServiceStartNotAllowedException。

如果您的应用声明了 SYSTEM_ALERT_WINDOW 权限并从后台启动前台服务，则可能会受到此变更的影响。如果您的应用获得了 ForegroundServiceStartNotAllowedException，请检查应用的操作顺序，并确保应用在尝试从后台启动前台服务之前已具有有效的叠加层窗口。您可以通过调用 View.getWindowVisibility() 检查叠加层窗口当前是否可见，也可以替换 View.onWindowVisibilityChanged()，以便在可见性发生变化时收到通知。

测试

如需测试应用的行为，您可以启用这些新限制，即使您的应用并未以 Android 15 为目标平台（只要应用在 Android 15 设备上运行）也是如此。如需针对从后台启动前台服务启用这些新限制，请运行以下 adb 命令：

adb shell am compat enable FGS_SAW_RESTRICTIONS your-package-name

更改了应用可以修改“勿扰”模式全局状态的时间

Apps that target Android 15 (API level 35) and higher can no longer change the global state or policy of Do Not Disturb (DND) on a device (either by modifying user settings, or turning off DND mode). Instead, apps must contribute an AutomaticZenRule, which the system combines into a global policy with the existing most-restrictive-policy-wins scheme. Calls to existing APIs that previously affected global state (setInterruptionFilter, setNotificationPolicy) result in the creation or update of an implicit AutomaticZenRule, which is toggled on and off depending on the call-cycle of those API calls.

Note that this change only affects observable behavior if the app is calling setInterruptionFilter(INTERRUPTION_FILTER_ALL) and expects that call to deactivate an AutomaticZenRule that was previously activated by their owners.

OpenJDK API 变更

Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.

Some of these changes can affect app compatibility for apps targeting Android 15 (API level 35):

• Changes to string formatting APIs: Validation of argument index, flags, width, and precision are now more strict when using the following String.format() and Formatter.format() APIs:

  • String.format(String, Object[])
  • String.format(Locale, String, Object[])
  • Formatter.format(String, Object[])
  • Formatter.format(Locale, String, Object[])

  For example, the following exception is thrown when an argument index of 0 is used (%0 in the format string):

  IllegalFormatArgumentIndexException: Illegal format argument index = 0
  

  In this case, the issue can be fixed by using an argument index of 1 (%1 in the format string).

• Changes to component type of Arrays.asList(...).toArray(): When using Arrays.asList(...).toArray(), the component type of the resulting array is now an Object—not the type of the underlying array's elements. So the following code throws a ClassCastException:

  String[] elements = (String[]) Arrays.asList("one", "two").toArray();
  

  For this case, to preserve String as the component type in the resulting array, you could use Collection.toArray(Object[]) instead:

  String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
  

• Changes to language code handling: When using the Locale API, language codes for Hebrew, Yiddish, and Indonesian are no longer converted to their obsolete forms (Hebrew: iw, Yiddish: ji, and Indonesian: in). When specifying the language code for one of these locales, use the codes from ISO 639-1 instead (Hebrew: he, Yiddish: yi, and Indonesian: id).

• Changes to random int sequences: Following the changes made in https://bugs.openjdk.org/browse/JDK-8301574, the following Random.ints() methods now return a different sequence of numbers than the Random.nextInt() methods do:

  • Random.ints(long)
  • Random.ints(long, int, int)
  • Random.ints(int, int)
  • Random.ints()

  Generally, this change shouldn't result in app-breaking behavior, but your code shouldn't expect the sequence generated from Random.ints() methods to match Random.nextInt().

The new SequencedCollection API can affect your app's compatibility after you update compileSdk in your app's build configuration to use Android 15 (API level 35):

• Collision with MutableList.removeFirst() and MutableList.removeLast() extension functions in kotlin-stdlib

  The List type in Java is mapped to the MutableList type in Kotlin. Because the List.removeFirst() and List.removeLast() APIs have been introduced in Android 15 (API level 35), the Kotlin compiler resolves function calls, for example list.removeFirst(), statically to the new List APIs instead of to the extension functions in kotlin-stdlib.

  If an app is re-compiled with compileSdk set to 35 and minSdk set to 34 or lower, and then the app is run on Android 14 and lower, a runtime error is thrown:

  java.lang.NoSuchMethodError: No virtual method
  removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
  

  The existing NewApi lint option in Android Gradle Plugin can catch these new API usages.

  ./gradlew lint
  
  MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi]
        list.removeFirst()
  

  To fix the runtime exception and lint errors, the removeFirst() and removeLast() function calls can be replaced with removeAt(0) and removeAt(list.lastIndex) respectively in Kotlin. If you're using Android Studio Ladybug | 2024.1.3 or higher, it also provides a quick fix option for these errors.

  Consider removing @SuppressLint("NewApi") and lintOptions { disable 'NewApi' } if the lint option has been disabled.

• Collision with other methods in Java

  New methods have been added into the existing types, for example, List and Deque. These new methods might not be compatible with the methods with the same name and argument types in other interfaces and classes. In the case of a method signature collision with incompatibility, the javac compiler outputs a build-time error. For example:

  Example error 1:

  javac MyList.java
  
  MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List
    public void removeLast() {
                ^
    return type void is not compatible with Object
    where E is a type-variable:
      E extends Object declared in interface List
  

  Example error 2:

  javac MyList.java
  
  MyList.java:7: error: types Deque<Object> and List<Object> are incompatible;
  public class MyList implements  List<Object>, Deque<Object> {
    both define reversed(), but with unrelated return types
  1 error
  

  Example error 3:

  javac MyList.java
  
  MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible;
  public static class MyList implements List<Object>, MyInterface<Object> {
    class MyList inherits unrelated defaults for getFirst() from types List and MyInterface
    where E#1,E#2 are type-variables:
      E#1 extends Object declared in interface List
      E#2 extends Object declared in interface MyInterface
  1 error
  

  To fix these build errors, the class implementing these interfaces should override the method with a compatible return type. For example:

  @Override
  public Object getFirst() {
      return List.super.getFirst();
  }
  

安全

Android 15 包含多项旨在提升系统安全性的变更，以帮助保护应用和用户免受恶意应用的侵害。

受限的 TLS 版本

Android 15 限制了对 TLS 版本 1.0 和 1.1 的使用。这些版本之前已在 Android 中被弃用，但现在不允许面向 Android 15 的应用使用。

限制后台 activity 启动

Android 15 protects users from malicious apps and gives them more control over their devices by adding changes that prevent malicious background apps from bringing other apps to the foreground, elevating their privileges, and abusing user interaction. Background activity launches have been restricted since Android 10 (API level 29).

Other changes

• Change PendingIntent creators to block background activity launches by default. This helps prevent apps from accidentally creating a PendingIntent that could be abused by malicious actors.
• Don't bring an app to the foreground unless the PendingIntent sender allows it. This change aims to prevent malicious apps from abusing the ability to start activities in the background. By default, apps are not allowed to bring the task stack to the foreground unless the creator allows background activity launch privileges or the sender has background activity launch privileges.
• Control how the top activity of a task stack can finish its task. If the top activity finishes a task, Android will go back to whichever task was last active. Moreover, if a non-top activity finishes its task, Android will go back to the home screen; it won't block the finish of this non-top activity.
• Prevent launching arbitrary activities from other apps into your own task. This change prevents malicious apps from phishing users by creating activities that appear to be from other apps.
• Block non-visible windows from being considered for background activity launches. This helps prevent malicious apps from abusing background activity launches to display unwanted or malicious content to users.

更安全的 intent

Android 15 introduces new optional security measures to make intents safer and more robust. These changes are aimed at preventing potential vulnerabilities and misuse of intents that can be exploited by malicious apps. There are two main improvements to the security of intents in Android 15:

• Match target intent-filters: Intents that target specific components must accurately match the target's intent-filter specifications. If you send an intent to launch another app's activity, the target intent component needs to align with the receiving activity's declared intent-filters.
• Intents must have actions: Intents without an action will no longer match any intent-filters. This means that intents used to start activities or services must have a clearly defined action.

In order to check how your app responds to these changes, use StrictMode in your app. To see detailed logs about Intent usage violations, add the following method:

fun onCreate() {
    StrictMode.setVmPolicy(VmPolicy.Builder()
        .detectUnsafeIntentLaunch()
        .build()
    )
}

public void onCreate() {
    StrictMode.setVmPolicy(new VmPolicy.Builder()
            .detectUnsafeIntentLaunch()
            .build());
}

用户体验和系统界面

Android 15 包含一些旨在打造更一致、更直观的用户体验的变更。

窗口边衬区变更

There are two changes related to window insets in Android 15: edge-to-edge is enforced by default, and there are also configuration changes, such as the default configuration of system bars.

全面实施政策

如果应用以 Android 15（API 级别 35）为目标平台，则在搭载 Android 15 的设备上默认以无边框显示。

这是一项重大变更，可能会对应用的界面产生负面影响。这些更改会影响以下界面区域：

• 手势柄导航栏
  • 默认透明。
  • 底部偏移量处于停用状态，因此内容会绘制在系统导航栏后面，除非应用了边衬区。
  • setNavigationBarColor 和 R.attr#navigationBarColor 已弃用，不会影响手势导航。
  • setNavigationBarContrastEnforced 和 R.attr#navigationBarContrastEnforced 继续对基于手势的导航没有任何影响。
• “三按钮”导航
  • 默认情况下，不透明度设置为 80%，颜色可能与窗口背景颜色一致。
  • 底部偏移量处于停用状态，因此内容会绘制在系统导航栏后面，除非应用了边衬区。
  • 默认情况下，setNavigationBarColor 和 R.attr#navigationBarColor 设置为与窗口背景保持一致。窗口背景必须是颜色可绘制对象，才能应用此默认值。此 API 已弃用，但仍会影响三按钮导航。
  • setNavigationBarContrastEnforced 和 R.attr#navigationBarContrastEnforced 默认值为 true，这会在三按钮导航栏中添加 80% 不透明度的背景。
• 状态栏
  • 默认透明。
  • 顶部偏移量处于停用状态，因此内容会绘制在状态栏后面，除非应用了边衬区。
  • setStatusBarColor 和 R.attr#statusBarColor 已被废弃，在 Android 15 上不起作用。
  • setStatusBarContrastEnforced 和 R.attr#statusBarContrastEnforced 已废弃，但仍会对 Android 15 产生影响。
• 刘海屏
  • 非浮动窗口的 layoutInDisplayCutoutMode 必须为 LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS。SHORT_EDGES、NEVER 和 DEFAULT 会被解读为 ALWAYS，这样用户就不会看到因刘海屏而产生的黑条，并且应用会显示在屏幕边缘。

以下示例展示了应用在以 Android 15（API 级别 35）为目标平台之前和之后，以及在应用边衬区之前和之后的效果。此示例并不全面，在 Android Auto 上可能会显示不同的内容。

如果您的应用已实现全屏显示，需要检查哪些方面

如果您的应用已实现全屏显示并应用边衬区，则除了以下情形外，您基本上不会受到影响。不过，即使您认为自己不受影响，我们仍建议您测试应用。

• 您有一个非浮动窗口，例如使用 SHORT_EDGES、NEVER 或 DEFAULT 而不是 LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS 的 Activity。如果您的应用在启动时崩溃，这可能是由启动画面引起的。您可以将核心启动画面依赖项升级到 1.2.0-alpha01 或更高版本，也可以设置 window.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always。
• 可能存在流量较低且界面被遮挡的屏幕。验证这些访问频率较低的界面是否没有被遮挡的界面。低流量屏幕包括：
  • 初始配置或登录界面
  • “设置”页面

如果您的应用尚未实现全屏显示，需要检查哪些方面

如果您的应用尚未实现全屏显示，则很可能会受到影响。除了已实现全屏显示的场景之外，您还应考虑以下情况：

• 如果您的应用在 Compose 中使用 Material 3 组件 (androidx.compose.material3)，例如 TopAppBar、BottomAppBar 和 NavigationBar，这些组件很可能不会受到影响，因为它们会自动处理边衬区。
• 如果您的应用使用的是 Compose 中的 Material 2 组件 (androidx.compose.material)，这些组件不会自动处理边衬区。不过，您可以获得边衬区的访问权限，然后手动应用边衬区。在 androidx.compose.material 1.6.0 及更高版本中，使用 windowInsets 参数可为 BottomAppBar、TopAppBar、BottomNavigation 和 NavigationRail 手动应用边衬区。 同样，请为 Scaffold 使用 contentWindowInsets 参数。
• 如果您的应用使用视图和 Material 组件 (com.google.android.material)，则大多数基于视图的 Material 组件（例如 BottomNavigationView、BottomAppBar、NavigationRailView 或 NavigationView）都会处理边衬区，因此不需要执行额外的操作。不过，如果使用的是 AppBarLayout，则需要添加 android:fitsSystemWindows="true"。
• 对于自定义可组合项，请手动应用边衬区作为内边距。如果您的内容位于 Scaffold 内，则可以使用 Scaffold 内边距值来使用边衬区。否则，请使用 WindowInsets 之一应用内边距。
• 如果应用使用的是视图和 BottomSheet、SideSheet 或自定义容器，请使用 ViewCompat.setOnApplyWindowInsetsListener 应用内边距。对于 RecyclerView，请使用此监听器应用内边距，同时添加 clipToPadding="false"。

如果应用必须提供自定义后台保护，您需要检查哪些方面

如果您的应用必须为三按钮导航或状态栏提供自定义背景保护，则应使用 WindowInsets.Type#tappableElement() 或 WindowInsets.Type#statusBars 将可组合项或视图放置在系统栏后面，以获取三按钮导航栏高度。

其他全屏显示资源

如需了解有关应用边衬区的其他注意事项，请参阅全屏视图和全屏 Compose 指南。

已弃用的 API

以下 API 已弃用，但未停用：

• R.attr#enforceStatusBarContrast
• R.attr#navigationBarColor（适用于三按钮导航，透明度为 80%）
• Window#isStatusBarContrastEnforced
• Window#setNavigationBarColor（适用于三按钮导航，透明度为 80%）
• Window#setStatusBarContrastEnforced

以下 API 已弃用并停用：

• R.attr#navigationBarColor（适用于手势导航）
• R.attr#navigationBarDividerColor
• R.attr#statusBarColor
• Window#setDecorFitsSystemWindows
• Window#getNavigationBarColor
• Window#getNavigationBarDividerColor
• Window#getStatusBarColor
• Window#setNavigationBarColor（适用于手势导航）
• Window#setNavigationBarDividerColor
• Window#setStatusBarColor

稳定配置

If your app targets Android 15 (API level 35) or higher, Configuration no longer excludes the system bars. If you use the screen size in the Configuration class for layout calculation, you should replace it with better alternatives like an appropriate ViewGroup, WindowInsets, or WindowMetricsCalculator depending on your need.

Configuration has been available since API 1. It is typically obtained from Activity.onConfigurationChanged. It provides information like window density, orientation, and sizes. One important characteristic about the window sizes returned from Configuration is that it previously excluded the system bars.

The configuration size is typically used for resource selection, such as /res/layout-h500dp, and this is still a valid use case. However, using it for layout calculation has always been discouraged. If you do so, you should move away from it now. You should replace the use of Configuration with something more suitable depending on your use case.

If you use it to calculate the layout, use an appropriate ViewGroup, such as CoordinatorLayout or ConstraintLayout. If you use it to determine the height of the system navbar, use WindowInsets. If you want to know the current size of your app window, use computeCurrentWindowMetrics.

The following list describes the fields affected by this change:

• Configuration.screenWidthDp and screenHeightDp sizes no longer exclude the system bars.
• Configuration.smallestScreenWidthDp is indirectly affected by changes to screenWidthDp and screenHeightDp.
• Configuration.orientation is indirectly affected by changes to screenWidthDp and screenHeightDp on close-to-square devices.
• Display.getSize(Point) is indirectly affected by the changes in Configuration. This was deprecated beginning in API level 30.
• Display.getMetrics() has already worked like this since API level 33.

elegantTextHeight 属性默认值为 true

For apps targeting Android 15 (API level 35), the elegantTextHeight TextView attribute becomes true by default, replacing the compact font used by default with some scripts that have large vertical metrics with one that is much more readable. The compact font was introduced to prevent breaking layouts; Android 13 (API level 33) prevents many of these breakages by allowing the text layout to stretch the vertical height utilizing the fallbackLineSpacing attribute.

In Android 15, the compact font still remains in the system, so your app can set elegantTextHeight to false to get the same behavior as before, but it is unlikely to be supported in upcoming releases. So, if your app supports the following scripts: Arabic, Lao, Myanmar, Tamil, Gujarati, Kannada, Malayalam, Odia, Telugu or Thai, test your app by setting elegantTextHeight to true.

TextView 宽度因复杂的字母形状而发生变化

In previous versions of Android, some cursive fonts or languages that have complex shaping might draw the letters in the previous or next character's area. In some cases, such letters were clipped at the beginning or ending position. Starting in Android 15, a TextView allocates width for drawing enough space for such letters and allows apps to request extra paddings to the left to prevent clipping.

Because this change affects how a TextView decides the width, TextView allocates more width by default if the app targets Android 15 (API level 35) or higher. You can enable or disable this behavior by calling the setUseBoundsForWidth API on TextView.

Because adding left padding might cause a misalignment for existing layouts, the padding is not added by default even for apps that target Android 15 or higher. However, you can add extra padding to preventing clipping by calling setShiftDrawingOffsetForStartOverhang.

The following examples show how these changes can improve text layout for some fonts and languages.

Standard layout for English text in a cursive font. Some of the letters are clipped. Here is the corresponding XML:

<TextView
    android:fontFamily="cursive"
    android:text="java" />

Layout for the same English text with additional width and padding. Here is the corresponding XML:

<TextView
    android:fontFamily="cursive"
    android:text="java"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

Standard layout for Thai text. Some of the letters are clipped. Here is the corresponding XML:

<TextView
    android:text="คอมพิวเตอร์" />

Layout for the same Thai text with additional width and padding. Here is the corresponding XML:

<TextView
    android:text="คอมพิวเตอร์"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

EditText 的语言区域感知默认行高

In previous versions of Android, the text layout stretched the height of the text to meet the line height of the font that matched the current locale. For example, if the content was in Japanese, because the line height of the Japanese font is slightly larger than the one of a Latin font, the height of the text became slightly larger. However, despite these differences in line heights, the EditText element was sized uniformly, regardless of the locale being used, as illustrated in the following image:

For apps targeting Android 15 (API level 35), a minimum line height is now reserved for EditText to match the reference font for the specified Locale, as shown in the following image:

If needed, your app can restore the previous behavior by specifying the useLocalePreferredLineHeightForMinimum attribute to false, and your app can set custom minimum vertical metrics using the setMinimumFontMetrics API in Kotlin and Java.

摄像头和媒体

Android 15 对以 Android 15 或更高版本为目标平台的应用的相机和媒体行为做出了以下更改。

有关请求音频焦点的限制

以 Android 15（API 级别 35）为目标平台的应用必须是顶部应用或正在运行前台服务，才能请求音频焦点。如果应用在未满足上述任一要求的情况下尝试请求焦点，调用将返回 AUDIOFOCUS_REQUEST_FAILED。

如需详细了解音频焦点，请参阅管理音频焦点。

更新后的非 SDK 限制

Android 15 包含更新后的受限非 SDK 接口列表（基于与 Android 开发者之间的协作以及最新的内部测试）。在限制使用非 SDK 接口之前，我们会尽可能确保有可用的公开替代方案。

如果您的应用并非以 Android 15 为目标平台，其中一些变更可能不会立即对您产生影响。不过，虽然您的应用可以访问某些非 SDK 接口（具体取决于应用的目标 API 级别），但只要您使用任何非 SDK 方法或字段，就始终会有很高风险导致应用功能异常。

如果您不确定自己的应用是否使用了非 SDK 接口，则可以通过测试该应用来进行确认。如果您的应用依赖非 SDK 接口，则应开始计划迁移到 SDK 替代方案。不过，我们知道某些应用存在使用非 SDK 接口的合理场景。如果您无法为应用中的某项功能找到使用非 SDK 接口的替代方案，则应该请求新的公共 API。

如需详细了解此 Android 版本中的变更，请参阅 Android 15 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息，请参阅对非 SDK 接口的限制。