Android 14 プラットフォームには、アプリに影響する可能性がある動作変更が含まれています。下記の動作変更は、targetSdkVersion に関係なく、Android 14 上で稼働するすべてのアプリに適用されます。該当する場合は、アプリをテストし、必要に応じて修正して、適切に対応してください。
Android 14 をターゲットとするアプリにのみ影響する動作変更のリストも必ずご確認ください。
コア機能
正確なアラームのスケジュールはデフォルトで拒否される
Exact alarms are meant for user-intentioned notifications, or for actions that
need to happen at a precise time. Starting in Android 14, the
SCHEDULE_EXACT_ALARM
permission is no longer being pre-granted to most newly installed apps
targeting Android 13 and higher—the permission is denied by default.
Learn more about the changes to the permission for scheduling exact alarms.
アプリがキャッシュされている間、コンテキスト登録されたブロードキャストがキューに追加される
On Android 14, the system can place context-registered broadcasts in a queue while the app is in the cached state. This is similar to the queuing behavior that Android 12 (API level 31) introduced for async binder transactions. Manifest-declared broadcasts aren't queued, and apps are removed from the cached state for broadcast delivery.
When the app leaves the cached state, such as returning to the foreground, the system delivers any queued broadcasts. Multiple instances of certain broadcasts might be merged into one broadcast. Depending on other factors, such as system health, apps might be removed from the cached state, and any previously queued broadcasts are delivered.
アプリは自身のバックグラウンド プロセスのみを強制終了できる
Android 14 以降では、アプリが killBackgroundProcesses() を呼び出した場合、API は自身のアプリのバックグラウンド プロセスのみを強制終了できます。
別のアプリのパッケージ名を渡した場合、このメソッドはそのアプリのバックグラウンド プロセスに影響せず、Logcat に次のメッセージが表示されます。
Invalid packageName: com.example.anotherapp
古いバージョンの OS であっても、アプリで killBackgroundProcesses() API を使用したり、他のアプリプロセスのライフサイクルに影響を与えようとしたりしないでください。Android は、キャッシュに保存されたアプリをバックグラウンドで保持し、システムにメモリが必要なときは自動的にそうしたアプリを強制終了するように設計されています。アプリが不必要に他のアプリを強制終了した場合、後でそれらのアプリを完全に再起動する必要があるため、システム パフォーマンスが低下し、バッテリー消費量が増加する可能性があります。これには、キャッシュに保存された既存のアプリを再開するよりもはるかに多くのリソースが必要になります。
MTU をリクエストした最初の GATT クライアントに対して MTU が 517 に設定される
Starting from Android 14, the Android Bluetooth stack more strictly adheres to
Version 5.2 of the Bluetooth Core Specification and requests
the BLE ATT MTU to 517 bytes when the first GATT client requests an MTU using
the BluetoothGatt#requestMtu(int) API, and disregards all subsequent MTU
requests on that ACL connection.
To address this change and make your app more robust, consider the following options:
- Your peripheral device should respond to the Android device's MTU request
with a reasonable value that can be accommodated by the peripheral. The
final negotiated value will be a minimum of the Android requested value and
the remote provided value (for example,
min(517, remoteMtu))- Implementing this fix could require a firmware update for peripheral
- Alternatively, limit your GATT characteristic writes based on the minimum
between the known supported value of your peripheral and the received MTU
change
- A reminder that you should reduce 5 bytes from the supported size for the headers
- For example:
arrayMaxLength = min(SUPPORTED_MTU, GATT_MAX_ATTR_LEN(517)) - 5
アプリを制限付きスタンバイ バケットに配置できる新しい理由
Android 14 introduces a new reason an app can be placed into the restricted standby bucket.
The app's jobs trigger ANR errors multiple times due to onStartJob,
onStopJob, or onBind method timeouts.
(See JobScheduler reinforces callback and network behavior for changes
to onStartJob and onStopJob.)
To track whether or not the app has entered the restricted standby bucket,
we recommend logging with the API UsageStatsManager.getAppStandbyBucket()
on job execution or UsageStatsManager.queryEventsForSelf() on app startup.
mlock が 64 KB に制限されている
Android 14（API レベル 34）以降では、mlock() を使用してロックできる最大メモリがプロセスごとに 64 KB に減らされます。以前のバージョンでは、上限はプロセスごとに 64 MB でした。この制限により、アプリとシステム全体でメモリ管理が改善されます。デバイス間での整合性を高めるために、Android 14 では、互換性のあるデバイスの新しい mlock() の上限に関する新しい CTS テストが追加されています。
システムがキャッシュに保存されたアプリのリソース使用量を適用する
By design, an app's process is in a cached state when it's moved to the
background and no other app process components are running. Such an app process
is subject to being killed due to system memory pressure. Any work that
Activity instances perform after the onStop() method has been called and
returned, while in this state, is unreliable and strongly discouraged.
Android 14 introduces consistency and enforcement to this design. Shortly after an app process enters a cached state, background work is disallowed, until a process component re-enters an active state of the lifecycle.
Apps that use typical framework-supported lifecycle APIs – such as
services, JobScheduler, and Jetpack WorkManager – shouldn't be
impacted by these changes.
ユーザー エクスペリエンス
閉じることができない通知のユーザー エクスペリエンスに関する変更
If your app shows non-dismissable foreground notifications to users, Android 14 has changed the behavior to allow users to dismiss such notifications.
This change applies to apps that prevent users from dismissing foreground
notifications by setting Notification.FLAG_ONGOING_EVENT through
Notification.Builder#setOngoing(true) or
NotificationCompat.Builder#setOngoing(true). The behavior of
FLAG_ONGOING_EVENT has changed to make such notifications actually
dismissable by the user.
These kinds of notifications are still non-dismissable in the following conditions:
- When the phone is locked
- If the user selects a Clear all notification action (which helps with accidental dismissals)
Also, this new behavior doesn't apply to notifications in the following use cases:
CallStylenotifications- Device policy controller (DPC) and supporting packages for enterprise
- Media notifications
- The default Search Selector package
データ セーフティ情報の視認性が向上
Android 14 では、ユーザーのプライバシーを保護するため、Google Play Console フォームで申告された情報を表示する場所を増やしています。現在のところ、この情報は、Google Play のアプリの掲載情報にあるデータ セーフティ セクションで確認できます。
アプリの位置情報の共有に関するポリシーを確認し、適宜 Google Play のデータ セーフティ セクションを更新することをおすすめします。
詳しくは、Android 14 でのデータ セーフティ情報の表示方法に関するガイドをご覧ください。
ユーザー補助
非線形フォント スケーリングを 200% にする
Starting in Android 14, the system supports font scaling up to 200%, providing low-vision users with additional accessibility options that align with Web Content Accessibility Guidelines (WCAG).
If you already use scaled pixels (sp) units to define text sizing, then this change probably won't have a high impact on your app. However, you should perform UI testing with the maximum font size enabled (200%) to ensure that your app can accommodate larger font sizes without impacting usability.
セキュリティ
インストール可能な最小対象 API レベル
Starting with Android 14, apps with a
targetSdkVersion lower than 23
can't be installed. Requiring apps to meet these minimum target API level
requirements improves security and privacy for users.
Malware often targets older API levels in order to bypass security and privacy
protections that have been introduced in newer Android versions. For example,
some malware apps use a targetSdkVersion of 22 to avoid being subjected to the
runtime permission model introduced in 2015 by Android 6.0 Marshmallow (API
level 23). This Android 14 change makes it harder for malware to avoid security
and privacy improvements.
Attempting to install an app targeting a lower API level will result in an
installation failure, with the following message appearing in Logcat:
INSTALL_FAILED_DEPRECATED_SDK_VERSION: App package must target at least SDK version 23, but found 7
On devices upgrading to Android 14, any apps with a targetSdkVersion lower
than 23 will remain installed.
If you need to test an app targeting an older API level, use the following ADB command:
adb install --bypass-low-target-sdk-block FILENAME.apk
メディア所有者のパッケージ名が削除される場合がある
The media store supports queries for the OWNER_PACKAGE_NAME column, which
indicates the app that stored a particular media file. Starting in Android
14, this value is redacted unless at least one of the following conditions is
true:
- The app that stored the media file has a package name that is always visible to other apps.
The app that queries the media store requests the
QUERY_ALL_PACKAGESpermission.
Learn more about how Android filters package visibility for privacy purposes.