التغييرات في السلوك: التطبيقات التي تستهدف الإصدار 14 من نظام التشغيل Android أو الإصدارات الأحدث

مثل الإصدارات السابقة، يتضمّن الإصدار 14 من Android تغييرات في السلوك قد تؤثر في تطبيقك. تنطبق تغييرات السلوك التالية حصريًا على التطبيقات التي تستهدف الإصدار 14 من Android (المستوى 34 لواجهة برمجة التطبيقات) أو الإصدارات الأحدث. إذا كان تطبيقك يستهدف الإصدار 14 من نظام التشغيل Android أو الإصدارات الأحدث، عليك تعديل تطبيقك ليتيح هذه السلوكيات بشكلٍ سليم، حيثما ينطبق ذلك.

احرص أيضًا على مراجعة قائمة التغييرات في السلوك التي تؤثر في جميع التطبيقات التي تعمل بالإصدار 14 من نظام التشغيل Android بغض النظر عن targetSdkVersion التطبيق.

الوظيفة الأساسية

أنواع الخدمات التي تعمل في المقدّمة مطلوبة

إذا كان تطبيقك يستهدف الإصدار 14 من نظام التشغيل Android (المستوى 34 لواجهة برمجة التطبيقات) أو الإصدارات الأحدث، يجب تحديد نوع واحد على الأقل من الخدمات التي تعمل في المقدّمة لكل خدمة تعمل في المقدّمة ضمن تطبيقك. ويجب اختيار نوع خدمة تعمل في المقدّمة يمثّل حالة استخدام تطبيقك. يتوقّع النظام أن تستوفي الخدمات التي تعمل في المقدّمة والتي لها نوع معيّن حالة استخدام معيّنة.

إذا لم تكن حالة استخدام في تطبيقك مرتبطة بأيّ من هذه الأنواع، ننصح بشدة بنقل منطقك لاستخدام WorkManager أو مهام نقل البيانات التي يبدأها المستخدم.

فرض إذن BLUETOOTH_CONNECT في BluetoothAdapter

Android 14 enforces the BLUETOOTH_CONNECT permission when calling the BluetoothAdapter getProfileConnectionState() method for apps targeting Android 14 (API level 34) or higher.

This method already required the BLUETOOTH_CONNECT permission, but it was not enforced. Make sure your app declares BLUETOOTH_CONNECT in your app's AndroidManifest.xml file as shown in the following snippet and check that a user has granted the permission before calling getProfileConnectionState.

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

تعديلات OpenJDK 17

يواصل نظام التشغيل Android 14 العمل على تحديث المكتبات الأساسية في Android لمواءمتها مع الميزات في أحدث إصدارات OpenJDK LTS، بما في ذلك تحديثات مكتبة ودعم لغة Java 17 لمطوّري التطبيقات والمنصات.

يمكن أن تؤثّر بعض هذه التغييرات في توافق التطبيق:

  • تغييرات على التعبيرات العادية: تم الآن منع استخدام مراجع المجموعات غير الصالحة لتتمكّن من اتّباع الدلالات في OpenJDK بشكلٍ أدق. قد تظهر لك حالات جديدة يتم فيها طرح IllegalArgumentException من فئة java.util.regex.Matcher، لذا احرص على اختبار تطبيقك في المناطق التي تستخدم التعبيرات العادية. لتفعيل هذا التغيير أو إيقافه أثناء الاختبار، بدِّل العلامة DISALLOW_INVALID_GROUP_REFERENCE باستخدام أدوات إطار العمل المعني بالتوافق.
  • معالجة معرّف UUID: تُجري طريقة java.util.UUID.fromString() الآن عمليات تحقّق أكثر صرامة عند التحقّق من مَعلمة الإدخال، لذا قد يظهر لك IllegalArgumentException أثناء تحويل البيانات إلى نص. لتفعيل هذا التغيير أو إيقافه أثناء الاختبار، بدِّل العلامة ENABLE_STRICT_VALIDATION باستخدام أدوات إطار العمل المعني بالتوافق.
  • مشاكل ProGuard: في بعض الحالات، تؤدي إضافة فئة java.lang.ClassValue إلى حدوث مشكلة إذا حاولت تصغير تطبيقك وتشويشه وتحسينه باستخدام ProGuard. تنشأ المشكلة من مكتبة Kotlin التي تغيّر سلوك وقت التشغيل استنادًا إلى ما إذا كانت Class.forName("java.lang.ClassValue") تُرجع فئة أم لا. إذا تم تطوير تطبيقك باستخدام إصدار قديم من وقت التشغيل بدون توفّر فئة java.lang.ClassValue، قد تؤدي عمليات التحسين هذه إلى إزالة طريقة computeValue من الفئات المشتقة من java.lang.ClassValue.

يعزّز JobScheduler سلوك ردّ الاتصال والشبكة.

تتوقع أداة Jobscheduler منذ إطلاقها أن يعود تطبيقك onStartJob أو onStopJob خلال بضع ثوانٍ. قبل Android 14، إذا كانت المهمة تستغرق وقتًا طويلاً، يتم إيقاف المهمة وتفشل تلقائيًا. إذا كان تطبيقك يستهدف الإصدار 14 من نظام التشغيل Android (المستوى 34 لواجهة برمجة التطبيقات) أو إصدارًا أحدث وتجاوز المدّة الممنوحة في سلسلة المهام الرئيسية، سيُنشئ التطبيق خطأ ANR مع رسالة الخطأ "ما مِن استجابة لـ onStartJob" أو "ما مِن استجابة لـ onStopJob".

قد يكون خطأ ANR هذا نتيجة لأحد السيناريوهَين التاليَين: 1. هناك عمل يحظر سلسلة المحادثات الرئيسية، ما يمنع عمليات معاودة الاتصال onStartJob. أو onStopJob من التنفيذ والإكمال خلال المهلة الزمنية المتوقّعة. 2. ينفِّذ المطوّر عمل حظر ضمن Job Scheduler استدعاء onStartJob أو onStopJob، ما يمنع معاودة الاتصال من لإنجازها خلال الحد الزمني المتوقع.

لمعالجة رقم 1، عليك إجراء المزيد من تصحيح الأخطاء التي تمنع سلسلة التعليمات الرئيسية. عند حدوث خطأ ANR، يمكنك القيام بذلك باستخدام ApplicationExitInfo#getTraceInputStream() للحصول على شاهد القبر وتتبع حدوث خطأ ANR. إذا كان بإمكانك إعادة إنتاج خطأ ANR يدويًا، يمكنك تسجيل تتبُّع للنظام وفحص التتبُّع باستخدام Android Studio أو Perfetto لفهم ما الذي يتم تشغيله في الخيط الرئيسي عند حدوث خطأ ANR بشكل أفضل. يُرجى العِلم أنّ هذا يمكن أن يحدث عند استخدام واجهة برمجة التطبيقات Jobscheduler API مباشرةً. أو استخدام WorkManager لمكتبة androidx.

لمعالجة رقم 2، ننصحك بإجراء عملية النقل إلى WorkManager، التي توفّر توفير إمكانية إكمال أي معالجة في onStartJob أو onStopJob في سلسلة محادثات غير متزامنة.

تفرض JobScheduler أيضًا شرطًا للإفصاح عن الإذن ACCESS_NETWORK_STATE في حال استخدام قيد setRequiredNetworkType أو setRequiredNetwork. إذا لم يفصح تطبيقك عن الحصول على إذن "ACCESS_NETWORK_STATE" عند تحديد موعد المهمة وتحديد الاستهداف الإصدار 14 من نظام التشغيل Android أو الإصدارات الأحدث، سيؤدي إلى حدوث SecurityException.

Tiles launch API

بالنسبة إلى التطبيقات التي تستهدف 14 عامًا أو أعلى، تم إيقاف TileService#startActivityAndCollapse(Intent) نهائيًا وسيتم طرحه الآن. استثناءً عند استدعائه. إذا كان تطبيقك يطلق الأنشطة من الشاشات، استخدِم TileService#startActivityAndCollapse(PendingIntent) بدلاً من ذلك.

الخصوصية

الوصول الجزئي إلى الصور والفيديوهات

يقدّم نظام التشغيل Android 14 ميزة "الوصول إلى الصور المحدّدة" التي تتيح للمستخدمين منح التطبيقات إذنًا بالوصول إلى صور وفيديوهات معيّنة في مكتبتهم، بدلاً من منح إذن بالوصول إلى كل الوسائط من نوع معيّن.

لا يتم تفعيل هذا التغيير إلا إذا كان تطبيقك يستهدف الإصدار 14 من نظام التشغيل Android (المستوى 34 لواجهة برمجة التطبيقات) أو الإصدارات الأحدث. إذا لم تكن تستخدِم أداة اختيار الصور بعد، ننصحك بإضافتها إلى تطبيقك لتوفير تجربة متّسقة لاختيار الصور والفيديوهات، وذلك أيضًا لتعزيز خصوصية المستخدم بدون الحاجة إلى طلب أي أذونات تخزين.

إذا كنت تحافظ على أداة اختيار معرض الصور باستخدام أذونات التخزين وتحتاج إلى الحفاظ على التحكّم الكامل في عملية التنفيذ، عليك تعديل عملية التنفيذ لاستخدام الإذن الجديد READ_MEDIA_VISUAL_USER_SELECTED. إذا كان تطبيقك لا يستخدم الإذن الجديد، سيشغّل النظام تطبيقك في وضع ملف التوافق.

تجربة المستخدم

إشعارات التطبيقات التي تعمل في وضع العرض بملء الشاشة

With Android 11 (API level 30), it was possible for any app to use Notification.Builder.setFullScreenIntent to send full-screen intents while the phone is locked. You could auto-grant this on app install by declaring USE_FULL_SCREEN_INTENT permission in the AndroidManifest.

Full-screen intent notifications are designed for extremely high-priority notifications demanding the user's immediate attention, such as an incoming phone call or alarm clock settings configured by the user. For apps targeting Android 14 (API level 34) or higher, apps that are allowed to use this permission are limited to those that provide calling and alarms only. The Google Play Store revokes default USE_FULL_SCREEN_INTENT permissions for any apps that don't fit this profile. The deadline for these policy changes is May 31, 2024.

This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.

You can use the new API NotificationManager.canUseFullScreenIntent to check if your app has the permission; if not, your app can use the new intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT to launch the settings page where users can grant the permission.

الأمان

القيود المفروضة على النوايا الضمنية والنوايا التي في انتظار المراجعة

For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:

  • Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
  • If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.

These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.

For example, here is an intent filter that could be declared in your app's manifest file:

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

If your app tried to launch this activity using an implicit intent, an ActivityNotFoundException exception would be thrown:

Kotlin

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

To launch the non-exported activity, your app should use an explicit intent instead:

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

يجب أن تحدِّد مستقبلات البث المسجَّلة أثناء التشغيل سلوك التصدير.

Apps and services that target Android 14 (API level 34) or higher and use context-registered receivers are required to specify a flag to indicate whether or not the receiver should be exported to all other apps on the device: either RECEIVER_EXPORTED or RECEIVER_NOT_EXPORTED, respectively. This requirement helps protect apps from security vulnerabilities by leveraging the features for these receivers introduced in Android 13.

Exception for receivers that receive only system broadcasts

If your app is registering a receiver only for system broadcasts through Context#registerReceiver methods, such as Context#registerReceiver(), then it shouldn't specify a flag when registering the receiver.

تحميل رمز ديناميكي أكثر أمانًا

If your app targets Android 14 (API level 34) or higher and uses Dynamic Code Loading (DCL), all dynamically-loaded files must be marked as read-only. Otherwise, the system throws an exception. We recommend that apps avoid dynamically loading code whenever possible, as doing so greatly increases the risk that an app can be compromised by code injection or code tampering.

If you must dynamically load code, use the following approach to set the dynamically-loaded file (such as a DEX, JAR, or APK file) as read-only as soon as the file is opened and before any content is written:

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

Handle dynamically-loaded files that already exist

To prevent exceptions from being thrown for existing dynamically-loaded files, we recommend deleting and recreating the files before you try to dynamically load them again in your app. As you recreate the files, follow the preceding guidance for marking the files read-only at write time. Alternatively, you can re-label the existing files as read-only, but in this case, we strongly recommend that you verify the integrity of the files first (for example, by checking the file's signature against a trusted value), to help protect your app from malicious actions.

قيود إضافية على بدء الأنشطة من الخلفية

For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:

These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.

مسح مسار ملفات Zip

بالنسبة إلى التطبيقات التي تستهدف الإصدار 14 من نظام التشغيل Android (المستوى 34 لواجهة برمجة التطبيقات) أو الإصدارات الأحدث، يمنع Android ثغرة ملف ZIP Path Traversal بالطريقة التالية: يعرض كل من ZipFile(String) و ZipInputStream.getNextEntry() خطأ ZipException إذا كانت أسماء إدخالات ملفات ZIP تحتوي على ".." أو تبدأ بـ "/".

يمكن للتطبيقات إيقاف عملية التحقّق هذه من خلال الاتصال بالرقم dalvik.system.ZipPathValidator.clearCallback().

For apps targeting Android 14 (API level 34) or higher, a SecurityException is thrown by MediaProjection#createVirtualDisplay in either of the following scenarios:

Your app must ask the user to give consent before each capture session. A single capture session is a single invocation on MediaProjection#createVirtualDisplay, and each MediaProjection instance must be used only once.

Handle configuration changes

If your app needs to invoke MediaProjection#createVirtualDisplay to handle configuration changes (such as the screen orientation or screen size changing), you can follow these steps to update the VirtualDisplay for the existing MediaProjection instance:

  1. Invoke VirtualDisplay#resize with the new width and height.
  2. Provide a new Surface with the new width and height to VirtualDisplay#setSurface.

Register a callback

Your app should register a callback to handle cases where the user doesn't grant consent to continue a capture session. To do this, implement Callback#onStop and have your app release any related resources (such as the VirtualDisplay and Surface).

If your app doesn't register this callback, MediaProjection#createVirtualDisplay throws an IllegalStateException when your app invokes it.

قيود غير متاحة في حزمة SDK تم تعديلها

Android 14 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 14, some of these changes might not immediately affect you. However, while you can currently use some non-SDK interfaces (depending on your app's target API level), using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you cannot find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

To learn more about the changes in this release of Android, see Updates to non-SDK interface restrictions in Android 14. To learn more about non-SDK interfaces generally, see Restrictions on non-SDK interfaces.