動作の変更点: Android 14 以上をターゲットとするアプリ

以前のリリースと同様に、Android 14 にはアプリに影響する可能性のある動作変更が含まれています。以下の動作変更は、Android 14(API レベル 34)以降をターゲットとするアプリにのみ適用されます。Android 14 以降をターゲットとするアプリについては、必要に応じてアプリを変更して、下記の動作に適切に対応できるようにしてください。

アプリの targetSdkVersion に関係なく、Android 14 で実行されるすべてのアプリに影響する動作変更のリストも必ずご確認ください。

コア機能

フォアグラウンド サービス タイプは必須

Android 14(API レベル 34)以降をターゲットとするアプリの場合は、アプリ内のフォアグラウンド サービスごとにフォアグラウンド サービス タイプを 1 つ以上指定する必要があります。フォアグラウンド サービスのタイプには、アプリのユースケースを表すものを選択する必要があります。システムは、特定のタイプのフォアグラウンド サービスが特定のユースケースを満たすことを想定しています。

アプリのユースケースがこれらのタイプのいずれにも関連していない場合は、WorkManager またはユーザーが開始するデータ転送ジョブを使用するようにロジックを移行することを強くおすすめします。

BluetoothAdapter での BLUETOOTH_CONNECT 権限の適用

Android 14 では、Android 14(API レベル 34)以降をターゲットとするアプリで BluetoothAdapter getProfileConnectionState() メソッドを呼び出すときに BLUETOOTH_CONNECT 権限が適用されます。

このメソッドにはすでに BLUETOOTH_CONNECT 権限が必要ですが、適用されていません。次のスニペットに示すように、アプリの AndroidManifest.xml ファイル内で必ず BLUETOOTH_CONNECT を宣言し、getProfileConnectionState を呼び出す前にユーザーが権限を付与したことを確認します。

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

OpenJDK 17 の更新

Android 14 では、最新の OpenJDK LTS リリースの機能に合わせて Android のコアライブラリを更新する取り組みが引き続き行われています。これには、アプリ デベロッパーとプラットフォーム デベロッパー向けのライブラリの更新と Java 17 言語のサポートが含まれます。

これらの変更のいくつかは、アプリの互換性に影響する可能性があります。

  • 正規表現の変更: 無効なグループ参照は、OpenJDK のセマンティクスに厳密に従うことができなくなりました。java.util.regex.Matcher クラスが IllegalArgumentException をスローする新しいケースが発生する可能性があるため、正規表現を使用する領域について必ずアプリのテストを行ってください。テスト中にこの変更を有効または無効にするには、互換性フレームワーク ツールを使用して DISALLOW_INVALID_GROUP_REFERENCE フラグを切り替えます。
  • UUID 処理: java.util.UUID.fromString() メソッドで入力引数を検証する際に、より厳格なチェックが行われるようになりました。これにより、シリアル化解除中に IllegalArgumentException が表示される場合があります。テスト中にこの変更を有効または無効にするには、互換性フレームワーク ツールを使用して ENABLE_STRICT_VALIDATION フラグを切り替えます。
  • ProGuard の問題: java.lang.ClassValue クラスの追加により、ProGuard を使用するアプリの圧縮、難読化、最適化をしようとすると問題が発生することがあります。この問題は、Class.forName("java.lang.ClassValue") がクラスを返すかどうかに基づいてランタイムの動作を変更する Kotlin ライブラリに起因します。java.lang.ClassValue クラスを利用できない古いバージョンのランタイムを対象にアプリが開発されている場合、これらの最適化により、java.lang.ClassValue から派生したクラスから computeValue メソッドが削除されることがあります。

JobScheduler でコールバックとネットワークの動作を強化

Since its introduction, JobScheduler expects your app to return from onStartJob or onStopJob within a few seconds. Prior to Android 14, if a job runs too long, it stops and fails silently. If your app targets Android 14 (API level 34) or higher and exceeds the granted time on the main thread, the app triggers an ANR with the error message "No response to onStartJob" or "No response to onStopJob". Consider migrating to WorkManager, which provides support for asynchronous processing or migrating any heavy work into a background thread.

JobScheduler also introduces a requirement to declare the ACCESS_NETWORK_STATE permission if using setRequiredNetworkType or setRequiredNetwork constraint. If your app does not declare the ACCESS_NETWORK_STATE permission when scheduling the job and is targeting Android 14 or higher, it will result in a SecurityException.

Tiles のリリース API

バージョン 14 以降をターゲットとするアプリの場合、TileService#startActivityAndCollapse(Intent) が非推奨になり、呼び出されると例外がスローされるようになりました。アプリがタイルからアクティビティを起動する場合は、代わりに TileService#startActivityAndCollapse(PendingIntent) を使用します。

プライバシー

写真と動画への部分的アクセス

Android 14 では、Selected Photos Access が導入され、特定のタイプのすべてのメディアへのアクセス権を付与するのではなく、ライブラリ内の特定の画像および動画へのアクセス権をアプリに付与できるようになりました。

この変更は、アプリが Android 14(API レベル 34)以降をターゲットとする場合にのみ有効になります。写真選択ツールをまだ使用していない場合は、アプリに実装して、ストレージの権限をリクエストしなくても、画像や動画を選択する際に一貫性のあるエクスペリエンスを提供することをおすすめします。これにより、ユーザーのプライバシーも強化されます。

ストレージの権限を使用して独自のギャラリー選択ツールを管理しており、実装を完全に制御する必要がある場合は、新しい READ_MEDIA_VISUAL_USER_SELECTED 権限を使用するように実装を調整します。アプリが新しい権限を使用しない場合、システムはアプリを互換モードで実行します。

ユーザー エクスペリエンス

安全な全画面インテント通知

With Android 11 (API level 30), it was possible for any app to use Notification.Builder.setFullScreenIntent to send full-screen intents while the phone is locked. You could auto-grant this on app install by declaring USE_FULL_SCREEN_INTENT permission in the AndroidManifest.

Full-screen intent notifications are designed for extremely high-priority notifications demanding the user's immediate attention, such as an incoming phone call or alarm clock settings configured by the user. For apps targeting Android 14 (API level 34) or higher, apps that are allowed to use this permission are limited to those that provide calling and alarms only. The Google Play Store revokes default USE_FULL_SCREEN_INTENT permissions for any apps that don't fit this profile. The deadline for these policy changes is May 31, 2024.

This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.

You can use the new API NotificationManager.canUseFullScreenIntent to check if your app has the permission; if not, your app can use the new intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT to launch the settings page where users can grant the permission.

セキュリティ

暗黙的インテントとペンディング インテントの制限

For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:

  • Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
  • If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.

These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.

For example, here is an intent filter that could be declared in your app's manifest file:

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

If your app tried to launch this activity using an implicit intent, an exception would be thrown:

Kotlin

// Throws an exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

To launch the non-exported activity, your app should use an explicit intent instead:

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

実行時に登録されるブロードキャスト レシーバでは、エクスポート動作を指定する必要がある

Apps and services that target Android 14 (API level 34) or higher and use context-registered receivers are required to specify a flag to indicate whether or not the receiver should be exported to all other apps on the device: either RECEIVER_EXPORTED or RECEIVER_NOT_EXPORTED, respectively. This requirement helps protect apps from security vulnerabilities by leveraging the features for these receivers introduced in Android 13.

Exception for receivers that receive only system broadcasts

If your app is registering a receiver only for system broadcasts through Context#registerReceiver methods, such as Context#registerReceiver(), then it shouldn't specify a flag when registering the receiver.

動的コードの読み込みの安全性を改善

Android 14(API レベル 34)以降をターゲットとするアプリが動的コードの読み込み(DCL)を使用している場合、動的に読み込まれるファイルはすべて読み取り専用としてマークする必要があります。そうしないと、システムは例外をスローします。アプリでは可能な限り、コードを動的に読み込まないようにすることをおすすめします。コードを動的に読み込むと、コード インジェクションやコードの改ざんによってアプリが不正使用されるリスクが大幅に高まります。

コードを動的に読み込む必要がある場合は、次の方法を使用して、ファイルを開いた直後、コンテンツが書き込まれる前に、動的読み込みファイル(DEX、JAR、APK ファイルなど)を読み取り専用ファイルとして設定します。

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

既存の動的読み込みファイルを処理する

既存の動的読み込みファイルに対して例外がスローされないようにするには、ファイルを削除して再作成してから、アプリでファイルを動的に読み込み直すことをおすすめします。ファイルを再作成するときは、上記のガイダンスに沿って書き込み時にファイルを読み取り専用としてマークしてください。既存のファイルに読み取り専用として再度ラベルを付けることもできますが、その場合は、信頼できる値に照らしてファイルの署名を確認するなど、最初にファイルの整合性を確認することを強くおすすめします。これにより、悪意のあるアクションからアプリを保護できます。

バックグラウンドからのアクティビティの起動に関する追加の制限

For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:

These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.

zip パス トラバーサル

Android 14(API レベル 34)以降をターゲットとするアプリの場合、Android は次の方法で ZIP パス トラバーサルの脆弱性を回避します。ZIP ファイルのエントリ名に「..」が含まれるか「/」で始まる場合、ZipFile(String)ZipInputStream.getNextEntry()ZipException をスローします。

アプリは dalvik.system.ZipPathValidator.clearCallback() を呼び出すことで、この検証をオプトアウトできます。

Android 14(API レベル 34)以降をターゲットとするアプリでは、次のいずれかのシナリオにおいて SecurityExceptionMediaProjection#createVirtualDisplay によってスローされます。

アプリは、各キャプチャ セッションの前にユーザーに同意を求める必要があります。単一キャプチャ セッションは、MediaProjection#createVirtualDisplay に対する 1 回の呼び出しです。各 MediaProjection インスタンスは 1 回だけ使用する必要があります。

構成の変更に対処する

アプリで構成の変更(画面の向きや画面サイズの変更など)を処理するために MediaProjection#createVirtualDisplay を呼び出す必要がある場合は、次の手順で既存の MediaProjection インスタンスの VirtualDisplay を更新できます。

  1. 新しい幅と高さで VirtualDisplay#resize を呼び出します。
  2. 新しい幅と高さが設定された新しい SurfaceVirtualDisplay#setSurface に指定します。

コールバックを登録する

アプリはコールバックを登録して、ユーザーがキャプチャ セッションの続行に同意しない場合に対処する必要があります。そのためには、Callback#onStop を実装し、アプリで関連リソース(VirtualDisplaySurface など)を解放します。

アプリがこのコールバックを登録しない場合、MediaProjection#createVirtualDisplay は、アプリがこのコールバックを呼び出したときに IllegalStateException をスローします。

非 SDK の制限の更新

Android 14 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 14, some of these changes might not immediately affect you. However, while you can currently use some non-SDK interfaces (depending on your app's target API level), using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you cannot find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

Android の今回のリリースの変更について詳しくは、非 SDK インターフェースの制限に関する Android 14 での変更点をご覧ください。非 SDK インターフェース全般について詳しくは、非 SDK インターフェースの制限をご覧ください。