ऐप्लिकेशन के व्यवहार में बदलाव: सभी ऐप्लिकेशन

Android 17 प्लैटफ़ॉर्म में, ऐसे बदलाव शामिल हैं जिनसे आपके ऐप्लिकेशन पर असर पड़ सकता है. Android 17 पर चलने वाले सभी ऐप्लिकेशन पर, यहां बताए गए बदलाव लागू होते हैं, भले ही, उनका targetSdkVersion कुछ भी हो. आपको अपने ऐप्लिकेशन की जांच करनी चाहिए. इसके बाद, ज़रूरत के हिसाब से उसमें बदलाव करना चाहिए, ताकि वह इन बदलावों के साथ काम कर सके.

साथ ही, आपको उन बदलावों की सूची भी देखनी चाहिए जिनका असर सिर्फ़ Android 17 को टारगेट करने वाले ऐप्लिकेशन पर पड़ता है.

मुख्य फ़ंक्शन

Android 17 (एपीआई लेवल 37) में, ये बदलाव शामिल हैं. इनसे Android सिस्टम की कई मुख्य क्षमताओं में बदलाव होता है या उन्हें बढ़ाया जाता है.

ऐप्लिकेशन के लिए मेमोरी की सीमाएं

Android 17 introduces app memory limits based on the device's total RAM to create a more stable and deterministic environment for your applications and Android users. In Android 17, limits are set conservatively to establish system baselines, targeting extreme memory leaks and other outliers before they trigger system-wide instability resulting in UI stuttering, higher battery drain, and apps being killed. While we anticipate minimal impact on the vast majority of app sessions, we recommend the following memory best practices, including establishing a baseline for memory.

You can determine if your app session was impacted by calling getDescription in ApplicationExitInfo; if your app was affected, the exit reason will be REASON_OTHER and the description will contain the string "MemoryLimiter:AnonSwap" along with other information. You can also use trigger-based profiling with TRIGGER_TYPE_ANOMALY to get heap dumps that are collected when the memory limit is hit.

The Manage your app's memory documentation gives information to help you diagnose your app's memory issues and optimize its resource consumption.

Test your app's behavior under the memory constraints

You can use Android Debug Bridge (adb) to adjust or disable the memory limits on any device that imposes them. The shell command am provides three subcommands to adjust the memory limits. (These commands have no effect on a device which does not impose memory limits.)

  • am memory-limiter ignore <uid>|none|all
  • am memory-limiter manual <pid> <limit>|max|none
  • am memory-limiter status
ignore

Instructs the memory limiter to ignore some or all processes. Passing a UID instructs the memory limiter to ignore all processes associated with that UID. You can also pass all (ignore all processes) or none (do not ignore any processes). Passing none overrides any previous calls to am memory-limiter ignore.

If you instruct the memory limiter to ignore a process, you can still apply a manual memory limit to the process by calling am memory-limiter manual.

manual

Instructs the system to impose a memory constraint on the process with the specified PID. The memory constraint is specified as an integer number of MB; for example, passing 30 specifies that the process is limited to 30 MB of memory. Passing max removes all memory limits on that process. Passing none removes any manual limits set on the process, restoring the system's default limit (if any).

status

Reports the current status of the memory limiter. The status includes the memory limits imposed on visible and non-visible processes.

निजता

Android 17 में, लोगों की निजता को बेहतर बनाने के लिए ये बदलाव किए गए हैं.

एसएमएस के ज़रिए भेजे गए ओटीपी की सुरक्षा

Beginning with Android 17, Android is expanding its protection for SMS messages containing one-time passwords (OTP).

In previous versions of Android, this protection was primarily focused on the SMS Retriever format. Delivery of messages containing an SMS retriever hash was delayed for most apps for three hours. However, certain certain apps (like the default SMS handler) were exempt from the delay, and the app that owned the hash was also exempted.

Beginning with Android 17, the protection is also applied to WebOTP format messages. If an app has permission to read SMS messages but is not the intended recipient of a WebOTP message (as determined by domain verification), the message is not accessible to the app until three hours after the message's receipt. This change is intended to improve user security by ensuring that only apps associated with the domain mentioned in the message can programmatically read the verification code.

During this three hour delay, the SMS_RECEIVED_ACTION broadcast is withheld and SMS provider database queries are filtered. The SMS message is available to these apps after the delay. This change applies to all apps, regardless of their target API level.

Certain apps such as the default SMS assistant app, connected device companion apps, etc., are exempted from this delay. All apps that rely on reading SMS messages for OTP extraction should transition to using SMS Retriever or SMS User Consent APIs to ensure continued functionality.

सुरक्षा

Android 17 में, डिवाइस और ऐप्लिकेशन की सुरक्षा को बेहतर बनाने के लिए ये बदलाव किए गए हैं.

usesClearTraffic को बंद करने की योजना

आने वाले समय में, हम usesCleartextTraffic एलिमेंट को बंद करने की योजना बना रहे हैं. जिन ऐप्लिकेशन को बिना एन्क्रिप्ट (एचटीटीपी) किए कनेक्शन बनाने होते हैं उन्हें नेटवर्क सिक्योरिटी कॉन्फ़िगरेशन फ़ाइल का इस्तेमाल करना चाहिए. इससे यह तय किया जा सकता है कि आपका ऐप्लिकेशन किन डोमेन से cleartext कनेक्शन बनाएगा.

ध्यान दें कि नेटवर्क सुरक्षा कॉन्फ़िगरेशन फ़ाइलें, सिर्फ़ एपीआई लेवल 24 और इसके बाद के वर्शन पर काम करती हैं. अगर आपके ऐप्लिकेशन का कम से कम एपीआई लेवल 24 से कम है, तो आपको ये दोनों काम करने चाहिए:

  • usesCleartextTraffic एट्रिब्यूट को true पर सेट करें
  • नेटवर्क कॉन्फ़िगरेशन फ़ाइल का इस्तेमाल करना

अगर आपके ऐप्लिकेशन का कम से कम एपीआई लेवल 24 या इससे ज़्यादा है, तो नेटवर्क कॉन्फ़िगरेशन फ़ाइल का इस्तेमाल किया जा सकता है. साथ ही, आपको usesCleartextTraffic सेट करने की ज़रूरत नहीं है.

यूआरआई के लिए, बिना अनुमति के ग्रांट को सीमित करना

फ़िलहाल, अगर कोई ऐप्लिकेशन ऐसे यूआरआई के साथ इंटेंट लॉन्च करता है जिसमें ऐक्शन ACTION_SEND, ACTION_SEND_MULTIPLE या ACTION_IMAGE_CAPTURE शामिल है, तो सिस्टम टारगेट ऐप्लिकेशन को यूआरआई को पढ़ने और लिखने की अनुमतियां अपने-आप दे देता है. Android 18 से, सिस्टम इन अनुमतियों को अपने-आप नहीं देगा. इस वजह से, हमारा सुझाव है कि ऐप्लिकेशन, सिस्टम पर भरोसा करने के बजाय यूआरआई की ज़रूरी अनुमतियां साफ़ तौर पर दें.

अपने ऐप्लिकेशन में इन इंटेंट के इस्तेमाल का पता लगाने के लिए, उल्लंघन ट्रिगर करने के लिए StrictMode के साथ detectImplicitUriPermissionGrant() का इस्तेमाल करें:

Kotlin

val policy = StrictMode.VmPolicy.Builder()
    .detectImplicitUriPermissionGrant()
    .penaltyLog()
    .build()
StrictMode.setVmPolicy(policy)

Java

StrictMode.VmPolicy policy = new StrictMode.VmPolicy.Builder()
    .detectImplicitUriPermissionGrant()
    .penaltyLog()
    .build();
StrictMode.setVmPolicy(policy);

इसके अलावा, लॉग किए गए उन अपवादों को मॉनिटर किया जा सकता है जिनमें यह मैसेज Please set the grant explicitly in the app शामिल हो. यह मैसेज तब दिखता है, जब सिस्टम अनुमति को अपने-आप सेट करता है. इन लॉग की निगरानी करने के लिए, adb कमांड का इस्तेमाल करें:

adb logcat | grep "Please set the grant explicitly in the app"

ज़रूरी अनुमतियां देने के लिए, ACTION_SEND और ACTION_SEND_MULTIPLE इंटेंट में FLAG_GRANT_READ_URI_PERMISSION फ़्लैग जोड़ें:

Kotlin

intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION)

Java

intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION);

ACTION_IMAGE_CAPTURE इंटेंट के लिए, FLAG_GRANT_READ_URI_PERMISSION और FLAG_GRANT_WRITE_URI_PERMISSION, दोनों फ़्लैग शामिल करें:

Kotlin

intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION or Intent.FLAG_GRANT_WRITE_URI_PERMISSION)

Java

intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION | Intent.FLAG_GRANT_WRITE_URI_PERMISSION);

हर ऐप्लिकेशन के लिए, कीस्टोर की सीमाएं

ऐप्लिकेशन को Android Keystore में बहुत ज़्यादा कुंजियां नहीं बनानी चाहिए, क्योंकि यह डिवाइस पर मौजूद सभी ऐप्लिकेशन के लिए शेयर किया गया संसाधन है. Android 17 से, सिस्टम यह तय करता है कि कोई ऐप्लिकेशन कितनी कुंजियों का मालिकाना हक रख सकता है. Android 17 (एपीआई लेवल 37) या उसके बाद के वर्शन को टारगेट करने वाले सिस्टम ऐप्लिकेशन के लिए, 50,000 कुंजियों की सीमा तय की गई है. वहीं, अन्य सभी ऐप्लिकेशन के लिए, 2,00,000 कुंजियों की सीमा तय की गई है. सिस्टम ऐप्लिकेशन के लिए, 2,00,000 कुंजियों की सीमा तय की गई है. इससे कोई फ़र्क़ नहीं पड़ता कि वे किस एपीआई लेवल को टारगेट करते हैं.

अगर कोई ऐप्लिकेशन तय सीमा से ज़्यादा कुंजियां बनाने की कोशिश करता है, तो KeyStoreException गड़बड़ी की वजह से कुंजियां नहीं बन पाएंगी. अपवाद के मैसेज स्ट्रिंग में, कुंजी की सीमा के बारे में जानकारी होती है. अगर ऐप्लिकेशन, अपवाद पर getNumericErrorCode() को कॉल करता है, तो रिटर्न वैल्यू इस बात पर निर्भर करती है कि ऐप्लिकेशन किस एपीआई लेवल को टारगेट करता है:

  • Android 17 (एपीआई लेवल 37) या इसके बाद के वर्शन को टारगेट करने वाले ऐप्लिकेशन के लिए: getNumericErrorCode() नई ERROR_TOO_MANY_KEYS वैल्यू दिखाता है.
  • अन्य सभी ऐप्लिकेशन के लिए: getNumericErrorCode(), ERROR_INCORRECT_USAGE दिखाता है.

क्रॉस प्रोफ़ाइल लूपबैक ट्रैफ़िक को ब्लॉक करना

Android 17 से, अलग-अलग प्रोफ़ाइल के बीच लूपबैक ट्रैफ़िक की अनुमति डिफ़ॉल्ट रूप से नहीं दी जाएगी. एक ही प्रोफ़ाइल के अंदर लूपबैक ट्रैफ़िक पर कोई असर नहीं पड़ेगा. यह बदलाव, Android 17 या उसके बाद के वर्शन पर चलने वाले सभी ऐप्लिकेशन पर लागू होता है. भले ही, ऐप्लिकेशन किस एपीआई लेवल को टारगेट कर रहा हो.

लोगों का अनुभव और सिस्टम यूज़र इंटरफ़ेस (यूआई)

Android 17 में, ये बदलाव किए गए हैं. इनका मकसद, लोगों को बेहतर और आसान अनुभव देना है.

रोटेशन के बाद, डिफ़ॉल्ट आईएमई की विज़िबिलिटी को वापस लाना

Android 17 से, डिवाइस के कॉन्फ़िगरेशन में बदलाव होने पर (उदाहरण के लिए, रोटेशन के ज़रिए) और अगर ऐप्लिकेशन इसे मैनेज नहीं करता है, तो पहले कीबोर्ड की दिखने की सेटिंग वापस नहीं लाई जाती.

अगर आपके ऐप्लिकेशन के कॉन्फ़िगरेशन में कोई ऐसा बदलाव होता है जिसे वह मैनेज नहीं करता है और बदलाव के बाद ऐप्लिकेशन को कीबोर्ड दिखाने की ज़रूरत है, तो आपको साफ़ तौर पर इसके लिए अनुरोध करना होगा. इसके लिए, इनमें से कोई एक तरीका अपनाएं:

  • android:windowSoftInputMode एट्रिब्यूट को stateAlwaysVisible पर सेट करें.
  • अपने ऐप्लिकेशन की onCreate() तरीके में, प्रोग्राम के ज़रिए सॉफ़्ट कीबोर्ड का अनुरोध करें या onConfigurationChanged() तरीका जोड़ें.

लोगों से मिले इनपुट

Android 17 में, ये बदलाव किए गए हैं. इनसे, कीबोर्ड और टचपैड जैसे लोगों से मिले इनपुट वाले डिवाइसों के साथ ऐप्लिकेशन के इंटरैक्ट करने के तरीके पर असर पड़ता है.

पॉइंटर कैप्चर के दौरान, टचपैड डिफ़ॉल्ट रूप से रिलेटिव इवेंट डिलीवर करते हैं

Android 17 से, अगर कोई ऐप्लिकेशन View.requestPointerCapture() का इस्तेमाल करके पॉइंटर कैप्चर करने का अनुरोध करता है और उपयोगकर्ता टचपैड का इस्तेमाल करता है, तो सिस्टम उपयोगकर्ता के टच से पॉइंटर की गतिविधि और स्क्रोलिंग के जेस्चर को पहचानता है. साथ ही, उन्हें ऐप्लिकेशन को उसी तरह से रिपोर्ट करता है जिस तरह से कैप्चर किए गए माउस से पॉइंटर और स्क्रोल व्हील की गतिविधियों को रिपोर्ट किया जाता है. ज़्यादातर मामलों में, इससे उन ऐप्लिकेशन की ज़रूरत खत्म हो जाती है जो कैप्चर किए गए चूहों के साथ काम करते हैं. साथ ही, टचपैड के लिए खास हैंडलिंग लॉजिक जोड़ते हैं. ज़्यादा जानकारी के लिए, View.POINTER_CAPTURE_MODE_RELATIVE का दस्तावेज़ देखें.

इससे पहले, सिस्टम टचपैड से किए गए जेस्चर को नहीं पहचानता था. इसके बजाय, यह उंगलियों की सटीक जगह की जानकारी को ऐप्लिकेशन को उसी फ़ॉर्मैट में भेजता था जिस फ़ॉर्मैट में टचस्क्रीन पर किए गए टच की जानकारी भेजी जाती है. अगर किसी ऐप्लिकेशन को अब भी इस डेटा की ज़रूरत है, तो उसे View.POINTER_CAPTURE_MODE_ABSOLUTE के साथ View.requestPointerCapture(int) तरीके को कॉल करना चाहिए.

मीडिया

Android 17 में, मीडिया के व्यवहार में ये बदलाव किए गए हैं.

बैकग्राउंड में चलने वाले ऑडियो की सुरक्षा को बेहतर बनाना

Beginning with Android 17, the audio framework enforces restrictions on background audio interactions including audio playback, audio focus requests, and volume change APIs to ensure that these changes are started intentionally by the user.

If the app tries to call audio APIs while the app is not in a valid lifecycle, the audio playback and volume change APIs fail silently without throwing an exception or providing a failure message. The audio focus API fails with the result code AUDIOFOCUS_REQUEST_FAILED.

For more information, including mitigation strategies, see Background audio hardening.

कनेक्टिविटी

Android 17 में, डिवाइस की कनेक्टिविटी को बेहतर बनाने के लिए ये बदलाव किए गए हैं.

ब्लूटूथ कनेक्शन टूटने पर, अपने-आप फिर से पेयर होना

Android 17 में, अपने-आप फिर से पेयर होने की सुविधा जोड़ी गई है. यह सिस्टम-लेवल पर किया गया सुधार है. इसे ब्लूटूथ कनेक्शन के बंद होने की समस्या को अपने-आप ठीक करने के लिए डिज़ाइन किया गया है.

पहले, अगर कोई बॉन्ड हट जाता था, तो उपयोगकर्ताओं को सेटिंग में जाकर, पेरिफ़ेरल को अनपेयर करना पड़ता था. इसके बाद, उसे फिर से पेयर करना पड़ता था. यह सुविधा, Android 16 में सुरक्षा से जुड़े सुधारों पर आधारित है. इससे सिस्टम को बैकग्राउंड में फिर से कनेक्शन बनाने की अनुमति मिलती है. इसके लिए, उपयोगकर्ताओं को सेटिंग में जाकर, पेरिफ़ेरल को अनपेयर और फिर से पेयर करने की ज़रूरत नहीं होती.

ज़्यादातर ऐप्लिकेशन के लिए, कोड में बदलाव करने की ज़रूरत नहीं होगी. हालांकि, डेवलपर को ब्लूटूथ स्टैक में होने वाले इन बदलावों के बारे में पता होना चाहिए:

  • पेयर करने का नया कॉन्टेक्स्ट: ACTION_PAIRING_REQUEST में अब EXTRA_PAIRING_CONTEXT एक्स्ट्रा शामिल है. इससे ऐप्लिकेशन, पेयर करने के सामान्य अनुरोध और ऑटोनॉमस सिस्टम की ओर से शुरू किए गए फिर से पेयर करने के अनुरोध के बीच अंतर कर सकते हैं.
  • शर्तों के साथ कुंजी अपडेट करना: मौजूदा सुरक्षा कुंजियों को सिर्फ़ तब बदला जाएगा, जब फिर से पेयर करने की प्रोसेस पूरी हो जाए और नया कनेक्शन, पिछले कनेक्शन के सुरक्षा स्तर के बराबर या उससे ज़्यादा हो.
  • बदली गई इंटेंट टाइमिंग: ACTION_KEY_MISSING इंटेंट अब सिर्फ़ तब ब्रॉडकास्ट होता है, जब अपने-आप फिर से पेयर करने की कोशिश नाकाम हो जाती है. अगर सिस्टम बैकग्राउंड में बॉन्ड को ठीक कर लेता है, तो इससे ऐप्लिकेशन में बिना वजह की गड़बड़ियों को ठीक करने की ज़रूरत नहीं पड़ती.
  • उपयोगकर्ता को सूचना: सिस्टम, नए यूज़र इंटरफ़ेस (यूआई) की सूचनाओं और डायलॉग बॉक्स के ज़रिए फिर से पेयर करने की प्रोसेस को मैनेज करता है. लोगों को फिर से पेयर करने की कोशिश की पुष्टि करने के लिए कहा जाएगा. इससे यह पक्का किया जा सकेगा कि उन्हें फिर से कनेक्ट होने के बारे में पता है.

पेरिफ़रल डिवाइस बनाने वाली कंपनियों और कंपैनियन ऐप्लिकेशन के डेवलपर को यह पुष्टि करनी चाहिए कि हार्डवेयर और ऐप्लिकेशन, बॉन्ड ट्रांज़िशन को आसानी से मैनेज करते हैं. इस व्यवहार की जांच करने के लिए, इनमें से किसी एक तरीके का इस्तेमाल करके, रिमोट बॉन्ड के खत्म होने का सिम्युलेट करें:

  • सहायक डिवाइस से, बॉन्ड की जानकारी को मैन्युअल तरीके से हटाएं
  • डिवाइस को मैन्युअल तरीके से अनपेयर करें: सेटिंग > कनेक्ट किए गए डिवाइस