이전 출시와 마찬가지로 Android 15에는 앱에 영향을 미칠 수 있는 동작 변경사항이 포함되어 있습니다. 다음 동작 변경사항은 Android 15 이상을 타겟팅하는 앱에만 적용됩니다. 앱이 Android 15 이상을 타겟팅한다면 이러한 동작을 올바르게 지원하도록 앱을 수정해야 합니다(해당하는 경우).
또한 앱의 targetSdkVersion
과 관계없이 Android 15에서 실행되는 모든 앱에 영향을 미치는 동작 변경사항 목록을 검토해야 합니다.
핵심 기능
Android 15는 Android 시스템의 다양한 핵심 기능을 수정하거나 확장합니다.
포그라운드 서비스 변경사항
Android 15의 포그라운드 서비스가 다음과 같이 변경됩니다.
데이터 동기화 포그라운드 서비스 제한 시간 동작
Android 15에서는 앱 타겟팅을 위해 dataSync
에 새로운 시간 제한 동작이 도입되었습니다.
Android 15 이상 이 동작은 새 mediaProcessing
포그라운드 서비스 유형을 참조하세요.
시스템은 앱의 dataSync
서비스를 총 6시간 동안 실행하도록 허용합니다.
24시간 후에 시스템이 실행 중인 서비스의
Service.onTimeout(int, int)
메서드 (Android에 도입됨)
참조). 현재 서비스가
Service.stopSelf()
Service.onTimeout()
가 호출되면
서비스는 더 이상 포그라운드 서비스로 간주되지 않습니다 서비스가
Service.stopSelf()
를 호출하면 시스템에서 내부 예외가 발생합니다. 이
Logcat에 다음 메시지와 함께 예외가 로깅됩니다.
Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"
이 동작 변경과 관련된 문제를 방지하려면 있습니다.
- 서비스에서 새
Service.onTimeout(int, int)
메서드를 구현하도록 합니다. 앱이 콜백을 수신하면stopSelf()
몇 초입니다. 앱을 즉시 중지하지 않으면 시스템에서 있습니다. - 앱의
dataSync
서비스가 총 24시간 중 6시간 (사용자가 앱과 상호작용하지 않는 한 타이머 재설정). - 직접 사용자의 결과로
dataSync
개의 포그라운드 서비스만 시작 상호작용 서비스가 시작될 때 앱이 포그라운드에 있으므로 앱이 백그라운드로 전환된 후 6시간 동안 서비스를 사용할 수 있습니다. dataSync
포그라운드 서비스 대신 대체 API.
앱의 dataSync
포그라운드 서비스가 지난 6시간 동안 실행된 경우
24를 실행하는 경우 사용자가 반드시 다른 dataSync
포그라운드 서비스를 시작할 수 없습니다.
앱을 포그라운드로 전환한 경우 (타이머가 재설정됨)입니다. 당신이
다른 dataSync
포그라운드 서비스를 시작하면 시스템에서
ForegroundServiceStartNotAllowedException
'포그라운드 서비스의 시간 제한이 이미 소진됨'과 같은 오류 메시지가 표시됨
dataSync 유형'으로 설정합니다.
테스트
앱의 동작을 테스트하려면 앱이 사용 중인 경우에도 데이터 동기화 시간 제한을 사용 설정할 수 있습니다.
앱이 Android 15를 타겟팅하지 않는 경우 (앱이 Android 15
기기). 제한 시간을 사용 설정하려면 다음 adb
명령어를 실행합니다.
adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name
또한 제한 시간을 조정하여
제한에 도달하면 앱이 동작합니다. 새 제한 시간을 설정하려면
다음 adb
명령어를 실행합니다.
adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds
새 미디어 처리 포그라운드 서비스 유형
Android 15 introduces a new foreground service type, mediaProcessing
. This
service type is appropriate for operations like transcoding media files. For
example, a media app might download an audio file and need to convert it to a
different format before playing it. You can use a mediaProcessing
foreground
service to make sure the conversion continues even while the app is in the
background.
The system permits an app's mediaProcessing
services to run for a total of 6
hours in a 24-hour period, after which the system calls the running service's
Service.onTimeout(int, int)
method (introduced in Android
15). At this time, the service has a few seconds to call
Service.stopSelf()
. If the service does not
call Service.stopSelf()
, the system throws an internal exception. The
exception is logged in Logcat with the following message:
Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"
To avoid having the exception, you can do one of the following:
- Have your service implement the new
Service.onTimeout(int, int)
method. When your app receives the callback, make sure to callstopSelf()
within a few seconds. (If you don't stop the app right away, the system generates a failure.) - Make sure your app's
mediaProcessing
services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer). - Only start
mediaProcessing
foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background. - Instead of using a
mediaProcessing
foreground service, use an alternative API, like WorkManager.
If your app's mediaProcessing
foreground services have run for 6 hours in the
last 24, you cannot start another mediaProcessing
foreground service unless
the user has brought your app to the foreground (which resets the timer). If you
try to start another mediaProcessing
foreground service, the system throws
ForegroundServiceStartNotAllowedException
with an error message like "Time limit already exhausted for foreground service
type mediaProcessing".
For more information about the mediaProcessing
service type, see Changes to
foreground service types for Android 15: Media processing.
Testing
To test your app's behavior, you can enable media processing timeouts even if
your app is not targeting Android 15 (as long as the app is running on an
Android 15 device). To enable timeouts, run the following adb
command:
adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name
You can also adjust the timeout period, to make it easier to test how your
app behaves when the limit is reached. To set a new timeout period, run the
following adb
command:
adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds
포그라운드 서비스를 실행하는 BOOT_COMPLETED
broadcast receiver에 관한 제한사항
broadcast receiver BOOT_COMPLETED
개에 새로운 제한사항이 적용됩니다.
포그라운드 서비스 BOOT_COMPLETED
수신기에서 다음을 실행할 수 없습니다.
포그라운드 서비스는 다음과 같습니다.
dataSync
camera
mediaPlayback
phoneCall
mediaProjection
microphone
(이 제한은 이후microphone
부터 적용되었음 Android 14)
BOOT_COMPLETED
수신기가 이러한 유형의 포그라운드를 실행하려고 하는 경우
시스템에서 ForegroundServiceStartNotAllowedException
을 발생시킵니다.
테스트
앱의 동작을 테스트하기 위해
앱이 Android 15를 타겟팅하지 않음 (앱이 Android 15
기기). 다음 adb
명령어를 실행합니다.
adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name
기기를 다시 시작하지 않고 BOOT_COMPLETED
브로드캐스트를 전송하려면 다음 안내를 따르세요.
다음 adb
명령어를 실행합니다.
adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name
앱이 SYSTEM_ALERT_WINDOW
권한을 보유한 동안 포그라운드 서비스 시작 시 제한사항
이전에는 앱에 SYSTEM_ALERT_WINDOW
권한이 있는 경우 앱이 현재 백그라운드에 있더라도 포그라운드 서비스를 실행할 수 있었습니다 (백그라운드 시작 제한 예외에서 설명).
앱이 Android 15를 타겟팅하는 경우 이제 이 예외의 범위가 더 좁아집니다. 이제 앱에 SYSTEM_ALERT_WINDOW
권한이 있어야 하며 또한 표시되는 오버레이 창이 있어야 합니다. 즉, 앱이 먼저 TYPE_APPLICATION_OVERLAY
창을 실행해야 하고 그리고 이 창이 표시되어야 포그라운드 서비스를 시작할 수 있습니다.
앱이 이러한 새로운 요구사항을 충족하지 않고 백그라운드에서 포그라운드 서비스를 시작하려고 하고 다른 예외가 없으면 시스템에서 ForegroundServiceStartNotAllowedException
이 발생합니다.
앱이 SYSTEM_ALERT_WINDOW
권한을 선언하고 백그라운드에서 포그라운드 서비스를 실행하면 이 변경사항의 영향을 받을 수 있습니다. 앱이 ForegroundServiceStartNotAllowedException
를 가져오면 앱의 작업 순서를 확인하고 앱이 백그라운드에서 포그라운드 서비스를 시작하려고 하기 전에 이미 활성 오버레이 창이 있는지 확인합니다. View.getWindowVisibility()
를 호출하여 오버레이 창이 현재 표시되는지 확인하거나 View.onWindowVisibilityChanged()
를 재정의하여 공개 상태가 변경될 때마다 알림을 받을 수 있습니다.
앱이 방해 금지 모드의 전체 상태를 수정할 수 있는 경우에 대한 변경사항
Android 15를 타겟팅하는 앱은 사용자 설정을 수정하거나 DND 모드를 사용 중지하여 기기에서 방해 금지 모드(DND)의 전체 상태 또는 정책을 더 이상 변경할 수 없습니다. 대신 앱은 AutomaticZenRule
를 제공해야 합니다. 시스템은 이 시스템에서 기존의 'most-restrictive-policy-wins' 체계가 적용된 전역 정책에 이를 결합합니다. 이전에 전역 상태 (setInterruptionFilter
, setNotificationPolicy
)에 영향을 미쳤던 기존 API를 호출하면 암시적 AutomaticZenRule
이 생성되거나 업데이트됩니다. 이 AutomaticZenRule
는 이러한 API 호출의 호출 주기에 따라 사용 설정되거나 사용 중지됩니다.
이 변경사항은 앱이 setInterruptionFilter(INTERRUPTION_FILTER_ALL)
를 호출하고 소유자가 이전에 활성화한 AutomaticZenRule
를 비활성화하기 위한 호출이 예상되는 경우에만 관찰 가능한 동작에만 영향을 미칩니다.
OpenJDK API 변경사항
Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.
Some of these changes can affect app compatibility for apps targeting Android 15 (API level 35):
Changes to string formatting APIs: Validation of argument index, flags, width, and precision are now more strict when using the following
String.format()
andFormatter.format()
APIs:String.format(String, Object[])
String.format(Locale, String, Object[])
Formatter.format(String, Object[])
Formatter.format(Locale, String, Object[])
For example, the following exception is thrown when an argument index of 0 is used (
%0
in the format string):IllegalFormatArgumentIndexException: Illegal format argument index = 0
In this case, the issue can be fixed by using an argument index of 1 (
%1
in the format string).Changes to component type of
Arrays.asList(...).toArray()
: When usingArrays.asList(...).toArray()
, the component type of the resulting array is now anObject
—not the type of the underlying array's elements. So the following code throws aClassCastException
:String[] elements = (String[]) Arrays.asList("one", "two").toArray();
For this case, to preserve
String
as the component type in the resulting array, you could useCollection.toArray(Object[])
instead:String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
Changes to language code handling: When using the
Locale
API, language codes for Hebrew, Yiddish, and Indonesian are no longer converted to their obsolete forms (Hebrew:iw
, Yiddish:ji
, and Indonesian:in
). When specifying the language code for one of these locales, use the codes from ISO 639-1 instead (Hebrew:he
, Yiddish:yi
, and Indonesian:id
).Changes to random int sequences: Following the changes made in https://bugs.openjdk.org/browse/JDK-8301574, the following
Random.ints()
methods now return a different sequence of numbers than theRandom.nextInt()
methods do:Generally, this change shouldn't result in app-breaking behavior, but your code shouldn't expect the sequence generated from
Random.ints()
methods to matchRandom.nextInt()
.
The new SequencedCollection
API can affect your app's compatibility
after you update compileSdk
in your app's build configuration to use
Android 15 (API level 35):
Collision with
MutableList.removeFirst()
andMutableList.removeLast()
extension functions inkotlin-stdlib
The
List
type in Java is mapped to theMutableList
type in Kotlin. Because theList.removeFirst()
andList.removeLast()
APIs have been introduced in Android 15 (API level 35), the Kotlin compiler resolves function calls, for examplelist.removeFirst()
, statically to the newList
APIs instead of to the extension functions inkotlin-stdlib
.If an app is re-compiled with
compileSdk
set to35
andminSdk
set to34
or lower, and then the app is run on Android 14 and lower, a runtime error is thrown:java.lang.NoSuchMethodError: No virtual method removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
The existing
NewApi
lint option in Android Gradle Plugin can catch these new API usages../gradlew lint
MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi] list.removeFirst()To fix the runtime exception and lint errors, the
removeFirst()
andremoveLast()
function calls can be replaced withremoveAt(0)
andremoveAt(list.lastIndex)
respectively in Kotlin. If you're using Android Studio Ladybug | 2024.1.3 or higher, it also provides a quick fix option for these errors.Consider removing
@SuppressLint("NewApi")
andlintOptions { disable 'NewApi' }
if the lint option has been disabled.Collision with other methods in Java
New methods have been added into the existing types, for example,
List
andDeque
. These new methods might not be compatible with the methods with the same name and argument types in other interfaces and classes. In the case of a method signature collision with incompatibility, thejavac
compiler outputs a build-time error. For example:Example error 1:
javac MyList.java
MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List public void removeLast() { ^ return type void is not compatible with Object where E is a type-variable: E extends Object declared in interface ListExample error 2:
javac MyList.java
MyList.java:7: error: types Deque<Object> and List<Object> are incompatible; public class MyList implements List<Object>, Deque<Object> { both define reversed(), but with unrelated return types 1 errorExample error 3:
javac MyList.java
MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible; public static class MyList implements List<Object>, MyInterface<Object> { class MyList inherits unrelated defaults for getFirst() from types List and MyInterface where E#1,E#2 are type-variables: E#1 extends Object declared in interface List E#2 extends Object declared in interface MyInterface 1 errorTo fix these build errors, the class implementing these interfaces should override the method with a compatible return type. For example:
@Override public Object getFirst() { return List.super.getLast(); }
보안
Android 15에는 악성 앱으로부터 앱과 사용자를 보호할 수 있도록 시스템 보안을 촉진하는 변경사항이 포함되어 있습니다.
안전한 백그라운드 활동 실행
Android 15는 악성 백그라운드 앱이 다른 앱을 포그라운드로 가져오고 권한을 승격하며 사용자 상호작용을 악용하지 못하도록 하는 변경사항을 추가하여 악성 앱으로부터 사용자를 보호하고 사용자가 기기를 더 잘 제어할 수 있도록 합니다. 백그라운드 활동 실행은 Android 10 (API 수준 29)부터 제한되었습니다.
스택의 상단 UID와 일치하지 않는 앱이 활동을 실행하지 못하도록 차단
악성 앱은 동일한 작업 내에서 다른 앱의 활동을 실행한 다음 그 위에 오버레이되어 앱이 있는 것처럼 보이게 할 수 있습니다. 이 '작업 도용' 공격은 모두 동일한 작업 내에서 발생하므로 현재의 백그라운드 실행 제한을 우회합니다. 이러한 위험을 완화하기 위해 Android 15에서는 스택의 상단 UID와 일치하지 않는 앱이 활동을 실행하지 못하도록 차단하는 플래그를 추가합니다. 앱의 모든 활동을 선택하려면 다음과 같이 앱의 AndroidManifest.xml
파일에서 allowCrossUidActivitySwitchFromBelow
속성을 업데이트합니다.
<application android:allowCrossUidActivitySwitchFromBelow="false" >
새로운 보안 조치는 다음 조건을 모두 충족하는 경우 적용됩니다.
- 출시를 실행하는 앱이 Android 15를 타겟팅합니다.
- 작업 스택 위에 있는 앱은 Android 15를 타겟팅합니다.
- 눈에 보이는 모든 활동이 새로운 보호 조치를 선택했습니다.
보안 조치가 사용 설정된 경우, 앱이 자체 작업을 완료하면 마지막으로 표시된 앱이 아닌 홈으로 돌아갈 수 있습니다.
기타 변경사항
UID 매칭 제한 외에도 다음과 같은 다른 변경사항도 포함되어 있습니다.
- 기본적으로 백그라운드 활동 실행을 차단하도록
PendingIntent
생성자를 변경합니다. 이렇게 하면 앱에서 악의적인 행위자가 악용할 수 있는PendingIntent
를 실수로 만드는 것을 방지할 수 있습니다. PendingIntent
발신자가 허용하지 않는 한 앱을 포그라운드로 가져오지 않습니다. 이 변경사항은 악성 앱이 백그라운드에서 활동을 시작하는 기능을 악용하지 않도록 하기 위한 것입니다. 기본적으로 앱은 개발자가 백그라운드 활동 실행 권한을 허용하거나 발신자가 백그라운드 활동 실행 권한을 가지고 있지 않는 한 앱에서 작업 스택을 포그라운드로 가져올 수 없습니다.- 작업 스택의 상단 활동이 작업을 완료하는 방법을 제어합니다. 최상위 활동이 작업을 완료하면 Android는 마지막으로 활성 상태였던 작업으로 돌아갑니다. 또한 최상위가 아닌 활동이 작업을 완료하면 Android는 홈 화면으로 돌아갑니다. 또한 최상위가 아닌 활동의 종료를 차단하지 않습니다.
- 다른 앱의 임의 활동을 자체 작업으로 실행하는 것을 방지합니다. 이 변경사항으로 인해 다른 앱에서 전송된 것처럼 보이는 활동을 생성하여 악성 앱이 피싱 사용자로부터 피해를 입지 않도록 방지할 수 있습니다.
- 보이지 않는 창이 백그라운드 활동 실행에 고려되지 않도록 차단합니다. 이렇게 하면 악성 앱이 백그라운드 활동 실행을 악용하여 원치 않는 콘텐츠나 악성 콘텐츠를 사용자에게 표시하는 것을 방지할 수 있습니다.
더 안전한 인텐트
Android 15 introduces new security measures to make intents safer and more robust. These changes are aimed at preventing potential vulnerabilities and misuse of intents that can be exploited by malicious apps. There are two main improvements to the security of intents in Android 15:
- Match target intent-filters: Intents that target specific components must accurately match the target's intent-filter specifications. If you send an intent to launch another app's activity, the target intent component needs to align with the receiving activity's declared intent-filters.
- Intents must have actions: Intents without an action will no longer match any intent-filters. This means that intents used to start activities or services must have a clearly defined action.
- Pending intents: The creator of the pending intent is treated as the sender of the enclosing intent, not the sender of the pending intent
Kotlin
fun onCreate() { StrictMode.setVmPolicy(VmPolicy.Builder() .detectUnsafeIntentLaunch() .build() ) }
Java
public void onCreate() { StrictMode.setVmPolicy(new VmPolicy.Builder() .detectUnsafeIntentLaunch() .build()); }
사용자 환경 및 시스템 UI
Android 15에는 더 일관되고 직관적인 사용자 환경을 만들기 위한 몇 가지 변경사항이 포함되어 있습니다.
창 인셋 변경사항
Android 15의 창 인셋과 관련된 두 가지 변경사항이 있습니다. 에지 투 에지가 기본적으로 적용되고 시스템 표시줄의 기본 구성과 같은 구성 변경사항도 있습니다.
더 넓은 화면 적용
앱이 다음과 같은 경우 Android 15를 실행하는 기기에서 앱은 기본적으로 더 넓은 화면입니다. Android 15 (API 수준 35)를 타겟팅해야 합니다.
<ph type="x-smartling-placeholder">![](https://developer.android.com/static/about/versions/15/images/edge-to-edge-1.png?authuser=9&hl=ko)
이는 앱의 UI에 부정적인 영향을 미칠 수 있는 브레이킹 체인지입니다. 이 변경사항은 다음 UI 영역에 영향을 미칩니다.
- 동작 핸들 탐색 메뉴
<ph type="x-smartling-placeholder">
- </ph>
- 기본적으로 투명합니다.
- 하단 오프셋이 사용 중지되어 콘텐츠가 시스템 탐색 뒤로 표시됩니다. 인셋을 적용할 수 없습니다.
setNavigationBarColor
및R.attr#navigationBarColor
: 동작 탐색에 영향을 미치지 않습니다setNavigationBarContrastEnforced
및R.attr#navigationBarContrastEnforced
이(가) 계속해서 다음 항목에 영향을 미치지 않습니다. 동작 탐색이 있습니다.
- 3버튼 탐색
<ph type="x-smartling-placeholder">
- </ph>
- 불투명도는 기본적으로 80% 로 설정되며 색상이 창과 일치할 가능성이 있음 있습니다.
- 콘텐츠가 시스템 탐색 메뉴 뒤에 그리도록 하단 오프셋이 사용 중지되었습니다. 인셋은 적용되지 않습니다.
setNavigationBarColor
및R.attr#navigationBarColor
: 기본적으로 창 배경과 일치하도록 설정됩니다. 창 배경 이 기본값을 적용하려면 색상 드로어블이어야 합니다. 이 API는 지원 중단되었지만 3버튼 탐색에 계속 영향을 미칩니다.setNavigationBarContrastEnforced
및R.attr#navigationBarContrastEnforced
는 기본적으로 true이며, 이 경우 3버튼 탐색 시 80% 불투명한 배경 사용
- 상태 표시줄
<ph type="x-smartling-placeholder">
- </ph>
- 기본적으로 투명합니다.
- 상단 오프셋이 사용 중지되어 삽입이 적용됩니다.
setStatusBarColor
및R.attr#statusBarColor
: Android 15에 영향을 미치지 않습니다.setStatusBarContrastEnforced
및R.attr#statusBarContrastEnforced
는 지원 중단되었지만 여전히 살펴봤습니다
- 디스플레이 컷아웃
<ph type="x-smartling-placeholder">
- </ph>
layoutInDisplayCutoutMode
의 플로팅이 아닌 창은 다음과 같아야 합니다.LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
SHORT_EDGES
,NEVER
및DEFAULT
는ALWAYS
로 해석되므로 사용자에게 검은색이 표시되지 않습니다. 가로 막대로 표시되며 더 넓은 화면에 표시됩니다.
다음 예는 타겟팅 전과 후의 앱을 보여줍니다. Android 15 (API 수준 35) 및 인셋 적용 전후
<ph type="x-smartling-placeholder">![](https://developer.android.com/static/about/versions/15/images/edge-to-edge-4.png?authuser=9&hl=ko)
![](https://developer.android.com/static/about/versions/15/images/edge-to-edge-6.png?authuser=9&hl=ko)
![](https://developer.android.com/static/about/versions/15/images/edge-to-edge-2.png?authuser=9&hl=ko)
앱이 이미 더 넓은 화면 환경을 제공하는지 확인할 사항
앱이 이미 더 넓은 화면이고 인셋을 적용하는 경우 다음을 충족해야 합니다. 다음과 같은 시나리오 외에는 거의 영향을 받지 않았습니다. 그러나 영향을 받지 않는다면 앱을 테스트하는 것이 좋습니다.
- 플로팅이 아닌 창(예:
Activity
SHORT_EDGES
,NEVER
또는DEFAULT
를LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
입니다. 실행 시 앱이 다운되면 스플래시 화면 때문일 수 있습니다. 코어 splashscreen 종속 항목을 1.2.0-alpha01로 설정합니다. 이상이거나window.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always
를 설정하세요. - UI가 가려진 트래픽이 적은 화면이 있을 수 있습니다. 확인
방문자가 적은 화면에는 UI가 가려지지 않습니다. 트래픽이 적은 화면에는 다음이 포함됩니다.
<ph type="x-smartling-placeholder">
- </ph>
- 온보딩 또는 로그인 화면
- 설정 페이지
앱이 더 넓은 화면이 아닌 경우 확인해야 할 사항
앱이 아직 더 넓은 화면이 아니라면 영향을 받을 가능성이 큽니다. 포함 이미 더 넓은 화면인 앱의 시나리오 외에도 다음 사항을 고려하세요.
- 앱에서 Material 3 구성요소 (
Compose에서
androidx.compose.material3
)(예:TopAppBar
)BottomAppBar
및NavigationBar
와 같은 구성요소를 사용하는 경우 이러한 구성요소는 그렇지 않을 수 있습니다. 영향을 받을 수 있습니다. - 앱에서 Material 2 구성요소 (
androidx.compose.material
)를 사용하는 경우 이러한 구성요소는 다음과 같습니다. 인셋을 자동으로 처리하지 않습니다. 하지만 인셋에 액세스할 수 있고 직접 적용할 수 있습니다 androidx.compose.material 1.6.0 나중에는windowInsets
매개변수를 사용하여BottomAppBar
,TopAppBar
,BottomNavigation
,NavigationRail
마찬가지로 다음과 같이contentWindowInsets
매개변수를 사용합니다.Scaffold
- 앱에서 뷰와 Material 구성요소를 사용하는 경우
(
com.google.android.material
), 대부분의 조회수 기반 자료BottomNavigationView
,BottomAppBar
,NavigationRailView
또는NavigationView
는 인셋을 처리하며 추가할 수 있습니다 하지만android:fitsSystemWindows="true"
를 추가해야 합니다.AppBarLayout
를 사용하는 경우 - 맞춤 컴포저블의 경우 인셋을 수동으로 패딩으로 적용합니다. 만약
콘텐츠가
Scaffold
내에 있으면Scaffold
패딩 값이 있습니다. 그렇지 않은 경우WindowInsets
- 앱에서 뷰와
BottomSheet
,SideSheet
또는 커스텀을 사용하는 경우 컨테이너에서 패딩을 적용하는 대신ViewCompat.setOnApplyWindowInsetsListener
대상RecyclerView
, 이 리스너를 사용하여 패딩을 적용하고clipToPadding="false"
앱에서 맞춤 백그라운드 보호를 제공해야 하는지 확인할 사항
앱이 3버튼 탐색에 대한 맞춤 백그라운드 보호 기능을 제공해야 하는 경우
앱이 시스템 바 뒤에 컴포저블 또는 뷰를 배치해야 합니다.
WindowInsets.Type#tappableElement()
를 사용하여 3버튼 가져오기
탐색 메뉴 높이 또는 WindowInsets.Type#statusBars
.
더 넓은 화면 추가 리소스
가장자리까지 뷰 및 가장자리 간 Compose를 참고하세요. 가이드를 참조하세요.
지원 중단된 API
다음 API는 현재 지원 중단되었습니다.
R.attr#enforceStatusBarContrast
R.attr#navigationBarColor
R.attr#navigationBarDividerColor
R.attr#statusBarColor
Window#getNavigationBarColor
Window#getNavigationBarDividerColor
Window#getStatusBarColor
Window#isStatusBarContrastEnforced
Window#setDecorFitsSystemWindows
Window#setNavigationBarColor
Window#setNavigationBarDividerColor
Window#setStatusBarColor
Window#setStatusBarContrastEnforced
안정적인 구성
앱이 Android 15 (API 수준 35) 이상을 타겟팅하는 경우 Configuration
시스템 표시줄이 더 이상 제외됩니다. 화면 크기를
Configuration
클래스로 대체해야 하므로 더 나은 클래스로 대체해야 합니다.
적절한 ViewGroup
, WindowInsets
또는
필요에 따라 WindowMetricsCalculator
.
Configuration
는 API 1부터 사용할 수 있습니다. 일반적으로
Activity.onConfigurationChanged
창 밀도,
사용할 수 있습니다. 창 크기에 관한 한 가지 중요한 특성
Configuration
에서 반환된 것은 이전에 시스템 표시줄을 제외했다는 것입니다.
구성 크기는 일반적으로 다음과 같이 리소스 선택에 사용됩니다.
/res/layout-h500dp
이며 여전히 유효한 사용 사례입니다. 그러나
레이아웃 계산은 권장되지 않습니다. 그렇게 하면
떨어질 수밖에 없었습니다. Configuration
사용을 다른 것으로 바꿔야 합니다.
더 적합할 수 있습니다
이를 사용하여 레이아웃을 계산하는 경우 다음과 같이 적절한 ViewGroup
를 사용합니다.
CoordinatorLayout
또는 ConstraintLayout
입니다. 인코더-디코더를 사용하여
시스템 탐색 메뉴의 경우 WindowInsets
를 사용합니다. 현재 크기를 알고 싶은 경우
computeCurrentWindowMetrics
를 사용합니다.
다음 목록은 이 변경사항의 영향을 받는 필드를 설명합니다.
Configuration.screenWidthDp
및screenHeightDp
크기가 더 이상 지원되지 않습니다. 시스템 표시줄을 제외합니다.- 변경사항의 간접적인 영향을 받는
Configuration.smallestScreenWidthDp
screenWidthDp
및screenHeightDp
에게 전송합니다. Configuration.orientation
은(는) 다음의 변경사항으로부터 간접적인 영향을 받습니다. 정사각형에 가까운 기기에서screenWidthDp
및screenHeightDp
Display.getSize(Point)
는Configuration
입니다. 이 기능은 API 수준 30부터 지원 중단되었습니다.Display.getMetrics()
는 API 수준 33부터 이미 이렇게 작동합니다.
우아한 텍스트 높이 속성의 기본값은 true입니다.
Android 15를 타겟팅하는 앱의 경우 elegantTextHeight
TextView
속성이 기본적으로 true
가 되어 기본적으로 사용되는 작은 글꼴이 큰 세로 측정항목이 있는 일부 스크립트로 대체되며 훨씬 더 읽기 쉽습니다. 간단한 글꼴은 레이아웃 나누기를 방지하기 위해 도입되었습니다. Android 13 (API 수준 33)은 fallbackLineSpacing
속성을 사용하여 텍스트 레이아웃이 세로 높이를 늘릴 수 있도록 하여 이러한 중단을 대부분 방지합니다.
Android 15에서는 작은 글꼴이 여전히 시스템에 유지되므로 앱에서 elegantTextHeight
를 false
로 설정하여 이전과 같은 동작을 가져올 수 있지만 향후 출시에서는 지원될 가능성이 낮습니다. 따라서 앱에서 아랍어, 라오어, 미얀마, 타밀어, 구자라트어, 칸나다어, 말라얄람어, 오디아, 텔루구어, 태국어 스크립트를 지원한다면 elegantTextHeight
를 true
로 설정하여 앱을 테스트하세요.
![](https://developer.android.com/static/about/versions/15/images/elegant-text-height-before.png?authuser=9&hl=ko)
elegantTextHeight
동작![](https://developer.android.com/static/about/versions/15/images/elegant-text-height-after.png?authuser=9&hl=ko)
elegantTextHeight
동작복잡한 문자 도형의 TextView 너비 변경
이전 버전의 Android에서는 복잡한 도형이 있는 일부 필기체 글꼴이나 언어를 사용하여 이전 또는 다음 문자 영역에 문자를 그릴 수 있었습니다.
이러한 문자가 시작 또는 종료 위치에서 잘리는 경우도 있었습니다.
Android 15부터 TextView
는 이러한 문자를 위한 충분한 공간을 그리기 위해 너비를 할당하고 앱에서 왼쪽에 추가 패딩을 요청하여 클리핑을 방지하도록 허용합니다.
이 변경사항은 TextView
이 너비를 결정하는 방식에 영향을 미치므로 앱이 Android 15 이상을 타겟팅하는 경우 TextView
는 기본적으로 더 많은 너비를 할당합니다. 이 동작은 TextView
에서 setUseBoundsForWidth
API를 호출하여 사용 설정하거나 중지할 수 있습니다.
왼쪽 패딩을 추가하면 기존 레이아웃이 잘못 정렬될 수 있으므로 Android 15 이상을 타겟팅하는 앱에서도 패딩이 기본적으로 추가되지 않습니다.
그러나 setShiftDrawingOffsetForStartOverhang
를 호출하여 클리핑을 방지하기 위해 패딩을 추가할 수 있습니다.
다음 예는 이러한 변경사항을 통해 일부 글꼴 및 언어의 텍스트 레이아웃을 어떻게 개선할 수 있는지 보여줍니다.
![](https://developer.android.com/static/about/versions/15/images/cursive-clipped.png?authuser=9&hl=ko)
<TextView android:fontFamily="cursive" android:text="java" />
![](https://developer.android.com/static/about/versions/15/images/cursive-noclipping.png?authuser=9&hl=ko)
<TextView android:fontFamily="cursive" android:text="java" android:useBoundsForWidth="true" android:shiftDrawingOffsetForStartOverhang="true" />
![](https://developer.android.com/static/about/versions/15/images/thai-clipped.png?authuser=9&hl=ko)
<TextView android:text="คอมพิวเตอร์" />
![](https://developer.android.com/static/about/versions/15/images/thai-noclipping.png?authuser=9&hl=ko)
<TextView android:text="คอมพิวเตอร์" android:useBoundsForWidth="true" android:shiftDrawingOffsetForStartOverhang="true" />
EditText의 언어 인식 기본 행 높이
이전 버전의 Android에서는 텍스트 레이아웃이 현재 언어와 일치하는 글꼴의 줄 높이를 충족하도록 텍스트의 높이를 늘렸습니다. 예를 들어 콘텐츠가 일본어인 경우 일본어 글꼴의 줄 높이가 라틴어 글꼴보다 약간 크므로 텍스트의 높이가 약간 커졌습니다. 그러나 이러한 줄 높이 차이에도 불구하고 EditText
요소는 다음 이미지와 같이 사용되는 언어에 관계없이 균일하게 크기가 조정되었습니다.
![](https://developer.android.com/static/about/versions/15/images/locale-aware-line-height-before.png?authuser=9&hl=ko)
EditText
요소를 나타내는 3개의 상자입니다. 언어마다 줄 높이가 다르지만 EditText
의 높이는 동일합니다.Android 15를 타겟팅하는 앱의 경우 다음 이미지와 같이 지정된 언어의 참조 글꼴과 일치하도록 EditText
의 최소 행 높이가 이제 예약됩니다.
![](https://developer.android.com/static/about/versions/15/images/locale-aware-line-height-after.png?authuser=9&hl=ko)
EditText
요소를 나타내는 3개의 상자입니다. 이제 EditText
의 높이에 이러한 언어 글꼴의 기본 행 높이를 수용할 수 있는 공간이 포함됩니다.필요한 경우 앱은 useLocalePreferredLineHeightForMinimum
속성을 false
로 지정하여 이전 동작을 복원할 수 있으며, 앱은 Kotlin과 자바에서 setMinimumFontMetrics
API를 사용하여 맞춤 최소 세로 측정항목을 설정할 수 있습니다.
카메라 및 미디어
Android 15에서는 Android 15 이상을 타겟팅하는 앱의 카메라 및 미디어 동작을 다음과 같이 변경합니다.
오디오 포커스 요청 제한사항
Android 15를 타겟팅하는 앱이 오디오 포커스를 요청하려면 최상위 앱이거나 포그라운드 서비스를 실행 중이어야 합니다. 앱이 이러한 요구사항 중 하나를 충족하지 않을 때 포커스를 요청하려고 하면 호출은 AUDIOFOCUS_REQUEST_FAILED
을 반환합니다.
오디오 포커스 관리에서 오디오 포커스에 관해 자세히 알아보세요.
업데이트된 비 SDK 제한사항
Android 15에는 제한된 비 SDK의 업데이트된 목록이 포함됨 Android 개발자와의 공동작업 및 최신 내부 테스트 비 SDK 인터페이스를 제한하는 경우, 가능하면 해당 인터페이스에 대한 공개된 대안이 사용 가능한지 여부를 확인합니다.
앱이 Android 15를 타겟팅하지 않는 경우 이러한 변경사항 중 일부는 즉시 영향을 받지 않을 수 있습니다 그러나 앱에서 일부 비 SDK 인터페이스에 액세스 앱의 대상 API 수준에 따라 다를 수 있습니다. 메서드 또는 필드는 항상 앱이 중단될 위험이 높습니다.
앱에서 비 SDK 인터페이스를 사용하는지 확실하지 않은 경우 앱을 테스트하여 알아보세요. 앱에서 비 SDK를 사용하는 경우 인터페이스를 사용하려면 대체 SDK로의 이전을 계획해야 합니다. 하지만 일부 앱에서는 비 SDK 인터페이스에 대해 알아보도록 하겠습니다. 비 SDK 사용의 대안을 찾을 수 없는 경우 인터페이스를 구현하려는 경우 새 공개 API를 요청할 수 있습니다.
이 Android 버전의 변경사항을 자세히 알아보려면 Android 15의 비 SDK 인터페이스 제한사항 업데이트를 참고하세요. 비 SDK 인터페이스에 관한 일반적인 내용을 자세히 알아보려면 비 SDK 인터페이스 제한사항을 참고하세요.