動作の変更点: Android 15 以上をターゲットとするアプリ

これまでのリリースと同様、Android 15 には、アプリに影響する可能性がある動作変更が含まれています。下記の動作変更は、Android 15 以上をターゲットとするアプリにのみ適用されます。アプリが Android 15 以上をターゲットとする場合は、必要に応じてアプリを変更し、下記の動作に適切に対応できるようにしてください。

アプリの targetSdkVersion に関係なく、Android 15 で実行されるすべてのアプリに影響する動作変更のリストも必ずご確認ください。

コア機能

Android 15 では、Android システムのさまざまなコア機能が変更または拡張されています。

フォアグラウンド サービスの変更

Android 15 では、フォアグラウンド サービスに次の変更を加えます。

データ同期フォアグラウンド サービスのタイムアウト動作

Android 15 では、Android 15(API レベル 35)以降をターゲットとするアプリに対して、dataSync に新しいタイムアウト動作が導入されます。この動作は、新しい mediaProcessing フォアグラウンド サービス タイプにも適用されます。

システムは、アプリの dataSync サービスを 24 時間以内に合計 6 時間実行することを許可します。その後、システムは実行中のサービスの Service.onTimeout(int, int) メソッド(Android 15 で導入)を呼び出します。この時点で、サービスは Service.stopSelf() を呼び出すために数秒間待機します。Service.onTimeout() が呼び出されると、サービスはフォアグラウンド サービスと見なされなくなります。サービスが Service.stopSelf() を呼び出さない場合、システムは内部例外をスローします。例外は Logcat に次のメッセージとともに記録されます。

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"

この動作の変更による問題を回避するには、次のいずれかを行います。

  1. サービスに新しい Service.onTimeout(int, int) メソッドを実装します。アプリがコールバックを受信したら、数秒以内に stopSelf() を呼び出します。(アプリをすぐに停止しないと、システムは障害を生成します)。
  2. アプリの dataSync サービスが、24 時間で合計 6 時間を超えて実行されていないことを確認します(ユーザーがアプリを操作してタイマーをリセットする場合を除きます)。
  3. dataSync フォアグラウンド サービスは、直接のユーザー操作の結果としてのみ起動します。サービスの開始時にアプリはフォアグラウンドにあるため、サービスはバックグラウンドに移行してから 6 時間すべてかかります。
  4. dataSync フォアグラウンド サービスを使用する代わりに、代替の API を使用してください。

アプリの dataSync フォアグラウンド サービスが過去 24 時間以内に 6 時間実行されている場合、ユーザーがアプリをフォアグラウンドに表示した(これによりタイマーがリセットされる)場合を除き、別の dataSync フォアグラウンド サービスを開始することはできません。別の dataSync フォアグラウンド サービスを開始しようとすると、システムは ForegroundServiceStartNotAllowedException をスローし、「フォアグラウンド サービス タイプ dataSync の制限時間はすでに経過しています」などのエラー メッセージを出力します。

テスト

アプリの動作をテストするには、アプリが Android 15 をターゲットとしていない場合でも、データ同期のタイムアウトを有効にできます(アプリが Android 15 デバイスで実行されている場合)。タイムアウトを有効にするには、次の adb コマンドを実行します。

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

タイムアウト期間を調整して、上限に達したときアプリの動作を簡単にテストすることもできます。新しいタイムアウト期間を設定するには、次の adb コマンドを実行します。

adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds

新しいメディア処理フォアグラウンド サービス タイプ

Android 15 introduces a new foreground service type, mediaProcessing. This service type is appropriate for operations like transcoding media files. For example, a media app might download an audio file and need to convert it to a different format before playing it. You can use a mediaProcessing foreground service to make sure the conversion continues even while the app is in the background.

The system permits an app's mediaProcessing services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"

To avoid having the exception, you can do one of the following:

  1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
  2. Make sure your app's mediaProcessing services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
  3. Only start mediaProcessing foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
  4. Instead of using a mediaProcessing foreground service, use an alternative API, like WorkManager.

If your app's mediaProcessing foreground services have run for 6 hours in the last 24, you cannot start another mediaProcessing foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another mediaProcessing foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type mediaProcessing".

For more information about the mediaProcessing service type, see Changes to foreground service types for Android 15: Media processing.

Testing

To test your app's behavior, you can enable media processing timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds

フォアグラウンド サービスを起動する BOOT_COMPLETED ブロードキャスト レシーバの制限

BOOT_COMPLETED ブロードキャスト レシーバに対する新しい制限事項がリリースされます フォアグラウンド サービスの場合。BOOT_COMPLETED レシーバーは、API 呼び出しを起動できない フォアグラウンド サービスのタイプを使用できます。

BOOT_COMPLETED レシーバーがこれらのタイプのフォアグラウンドのいずれかを起動しようとした場合 サービスの場合、システムは ForegroundServiceStartNotAllowedException をスローします。

テスト

アプリの動作をテストするには、アプリが Android 15 をターゲットとしていない場合でも、これらの新しい制限を有効にできます(アプリが Android 15 デバイスで実行されている場合)。次の adb コマンドを実行します。

adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name

デバイスを再起動せずに BOOT_COMPLETED ブロードキャストを送信するには、次の操作を行います。 次の adb コマンドを実行します。

adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name

アプリが SYSTEM_ALERT_WINDOW 権限を保持しているときにフォアグラウンド サービスを開始する場合の制限

以前は、アプリが SYSTEM_ALERT_WINDOW 権限を保持している場合、アプリが現在バックグラウンドで実行されている場合でも、フォアグラウンド サービスを起動できました(バックグラウンドでの起動制限の免除で説明しています)。

アプリが Android 15 をターゲットとしている場合、この免除はより限定的になりました。アプリには SYSTEM_ALERT_WINDOW 権限が必要になり、また、表示可能なオーバーレイ ウィンドウも必要になります。つまり、フォアグラウンド サービスを開始する前に、アプリがまず TYPE_APPLICATION_OVERLAY ウィンドウを起動、そのウィンドウを表示する必要があります。

アプリがこれらの新しい要件を満たさずにバックグラウンドからフォアグラウンド サービスを起動しようとすると(他の例外がない限り)、システムは ForegroundServiceStartNotAllowedException をスローします。

アプリが SYSTEM_ALERT_WINDOW 権限を宣言し、バックグラウンドからフォアグラウンド サービスを起動する場合、この変更の影響を受ける可能性があります。アプリが ForegroundServiceStartNotAllowedException を取得した場合は、アプリの処理順序を確認し、バックグラウンドからフォアグラウンド サービスを開始する前に、アプリにアクティブなオーバーレイ ウィンドウがすでに存在することを確認します。オーバーレイ ウィンドウが現在表示されているかどうかを確認するには、View.getWindowVisibility() を呼び出します。また、View.onWindowVisibilityChanged() を上書きして、可視性が変更されるたびに通知を受け取ることもできます。

テスト

アプリの動作をテストするには、アプリが Android 15 をターゲットとしていない場合でも、これらの新しい制限を有効にできます(アプリが Android 15 デバイスで実行されている場合)。バックグラウンドからフォアグラウンド サービスを起動する際の新しい制限を有効にするには、次の adb コマンドを実行します。

adb shell am compat enable FGS_SAW_RESTRICTIONS your-package-name

アプリがサイレント モードのグローバル状態を変更できるタイミングの変更

Apps that target Android 15 (API level 35) and higher can no longer change the global state or policy of Do Not Disturb (DND) on a device (either by modifying user settings, or turning off DND mode). Instead, apps must contribute an AutomaticZenRule, which the system combines into a global policy with the existing most-restrictive-policy-wins scheme. Calls to existing APIs that previously affected global state (setInterruptionFilter, setNotificationPolicy) result in the creation or update of an implicit AutomaticZenRule, which is toggled on and off depending on the call-cycle of those API calls.

Note that this change only affects observable behavior if the app is calling setInterruptionFilter(INTERRUPTION_FILTER_ALL) and expects that call to deactivate an AutomaticZenRule that was previously activated by their owners.

OpenJDK API の変更

Android 15 では、最新の OpenJDK LTS リリースの機能に合わせて Android のコアライブラリを更新する取り組みが引き続き行われています。

これらの変更の一部は、Android 15(API レベル 35)をターゲットとするアプリの互換性に影響する可能性があります。

  • String Formatting API を変更: 次の String.format() API と Formatter.format() API を使用する場合、引数インデックス、フラグ、幅、精度の検証がより厳格になりました。

    たとえば、引数インデックス 0(書式文字列の %0)が使用されると、次の例外がスローされます。

    IllegalFormatArgumentIndexException: Illegal format argument index = 0
    

    この場合、引数インデックス 1(形式文字列の %1)を使用することで問題を解決できます。

  • Arrays.asList(...).toArray() のコンポーネント型の変更: Arrays.asList(...).toArray() を使用する場合、結果の配列のコンポーネント型は、基になる配列の要素の型ではなく、Object になりました。したがって、次のコードは ClassCastException をスローします。

    String[] elements = (String[]) Arrays.asList("one", "two").toArray();
    

    この場合、結果の配列でコンポーネント タイプとして String を保持するには、代わりに Collection.toArray(Object[]) を使用します。

    String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
    
  • 言語コードの処理の変更: Locale API を使用する場合、ヘブライ語、イディッシュ語、インドネシア語の言語コードは、廃止された形式(ヘブライ語: iw、イディッシュ語: ji、インドネシア語: in)に変換されなくなりました。これらの言語の言語コードを指定する場合は、代わりに ISO 639-1 のコード(ヘブライ語: he、イディッシュ語: yi、インドネシア語: id)を使用してください。

  • ランダムな整数シーケンスの変更: https://bugs.openjdk.org/browse/JDK-8301574 で行われた変更に伴い、次の Random.ints() メソッドは Random.nextInt() メソッドとは異なる数値シーケンスを返すようになりました。

    一般に、この変更によってアプリの動作が中断されることはありませんが、コードでは Random.ints() メソッドから生成されたシーケンスが Random.nextInt() と一致することを想定しないでください。

新しい SequencedCollection API は、アプリのビルド構成で compileSdk を更新して Android 15(API レベル 35)を使用すると、アプリの互換性に影響する可能性があります。

  • kotlin-stdlibMutableList.removeFirst() 拡張関数と MutableList.removeLast() 拡張関数との競合

    Java の List 型は、Kotlin の MutableList 型にマッピングされます。List.removeFirst() API と List.removeLast() API は Android 15(API レベル 35)で導入されたため、Kotlin コンパイラは、list.removeFirst() などの関数呼び出しを、kotlin-stdlib の拡張関数ではなく、新しい List API に静的に解決します。

    compileSdk35 に設定され、minSdk34 以下に設定された状態でアプリが再コンパイルされ、Android 14 以下で実行されると、ランタイム エラーがスローされます。

    java.lang.NoSuchMethodError: No virtual method
    removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
    

    Android Gradle プラグインの既存の NewApi lint オプションで、これらの新しい API の使用を検出できます。

    ./gradlew lint
    
    MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi]
          list.removeFirst()
    

    ランタイム例外と lint エラーを修正するには、Kotlin で removeFirst() 関数呼び出しと removeLast() 関数呼び出しをそれぞれ removeAt(0)removeAt(list.lastIndex) に置き換えます。Android Studio Ladybug | 2024.1.3 以降を使用している場合は、これらのエラーに対するクイック フィックス オプションも提供されます。

    lint オプションが無効になっている場合は、@SuppressLint("NewApi")lintOptions { disable 'NewApi' } の削除を検討してください。

  • Java の他のメソッドとの衝突

    既存の型(ListDeque など)に新しいメソッドが追加されました。これらの新しいメソッドは、他のインターフェースやクラスで同じ名前と引数の型を持つメソッドと互換性がない可能性があります。互換性のないメソッド シグネチャの衝突が発生した場合、javac コンパイラはビルド時のエラーを出力します。次に例を示します。

    エラーの例 1:

    javac MyList.java
    
    MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List
      public void removeLast() {
                  ^
      return type void is not compatible with Object
      where E is a type-variable:
        E extends Object declared in interface List
    

    エラーの例 2:

    javac MyList.java
    
    MyList.java:7: error: types Deque<Object> and List<Object> are incompatible;
    public class MyList implements  List<Object>, Deque<Object> {
      both define reversed(), but with unrelated return types
    1 error
    

    エラー 3 の例:

    javac MyList.java
    
    MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible;
    public static class MyList implements List<Object>, MyInterface<Object> {
      class MyList inherits unrelated defaults for getFirst() from types List and MyInterface
      where E#1,E#2 are type-variables:
        E#1 extends Object declared in interface List
        E#2 extends Object declared in interface MyInterface
    1 error
    

    これらのビルドエラーを修正するには、これらのインターフェースを実装するクラスで、互換性のある戻り値の型を使用してメソッドをオーバーライドする必要があります。次に例を示します。

    @Override
    public Object getFirst() {
        return List.super.getFirst();
    }
    

セキュリティ

Android 15 には、悪意のあるアプリからアプリとユーザーを保護するために、システムのセキュリティを強化する変更が含まれています。

制限付き TLS バージョン

Android 15 では、TLS バージョン 1.0 および 1.1 の使用が制限されています。これまではこれらのバージョンは Android で非推奨でしたが、現在は Android 15 をターゲットとするアプリで許可されないようになりました。

バックグラウンド アクティビティの安全な起動

Android 15 では、悪意のあるアプリからユーザーを保護し、より細かく 悪意のあるバックグラウンド アプリが悪意のあるアクティビティを 他のアプリをフォアグラウンド表示させる、権限昇格させる、アプリを悪用する です。バックグラウンド アクティビティの起動は、それ以降、 Android 10(API レベル 29)。

その他の変更点

UID の一致に関する制限に加えて、次の変更も加えられています。

  • PendingIntent クリエイターを変更し、デフォルトでバックグラウンド アクティビティの起動をブロックするようにしました。これにより、アプリが誤って IP アドレスを PendingIntent: 悪意のある人物によって悪用されるおそれがあります。
  • PendingIntent 送信者が許可しない限り、アプリをフォアグラウンドに表示しないでください。この変更は、悪意のあるアプリがバックグラウンドでアクティビティを開始する機能を悪用することを防ぐことを目的としています。デフォルトでは、作成者がバックグラウンド アクティビティの起動権限を許可している場合、または送信者にバックグラウンド アクティビティの起動権限がある場合を除き、アプリはタスクスタックをフォアグラウンドに表示できません。
  • タスクスタックの最上位アクティビティがタスクを終了する方法を制御する。最上位のアクティビティがタスクを完了すると、Android は最後にアクティブだったタスクに戻ります。また、トップ以外のアクティビティがタスクを終了すると、Android はホーム画面に戻ります。このトップ以外のアクティビティの終了はブロックされません。
  • 他のアプリから任意のアクティビティを独自のタスクに起動できないようにする。この変更により、悪意のあるアプリがユーザーをフィッシング攻撃から 他のアプリからと思われるアクティビティ
  • 非表示のウィンドウがバックグラウンド アクティビティの起動の対象と見なされないようにする。これにより、悪意のあるアプリがバックグラウンド アクティビティの起動を悪用して、望ましくないコンテンツや悪意のあるコンテンツをユーザーに表示するのを防ぐことができます。

より安全なインテント

Android 15 では、インテントをより安全で堅牢にするための新しいオプションのセキュリティ対策が導入されています。これらの変更は、悪意のあるアプリによって悪用される可能性のある脆弱性とインテントの不正使用を防ぐことを目的としています。2 つのモデル Android 15 では、インテントのセキュリティに関して次のように改善されています。

  • ターゲット インテント フィルタと一致する: 特定のコンポーネントをターゲットとするインテントは、ターゲットのインテント フィルタ仕様に正確に一致する必要があります。。 別のアプリのアクティビティを起動するインテントがある場合は、ターゲット インテント コンポーネントが 受信側アクティビティの宣言されたインテント フィルタと一致している。
  • インテントにアクションを含める: アクションのないインテントは一致しなくなります。 すべてのインテント フィルタが含まれます。つまり、アクティビティやイベントの開始に 明確に定義されたアクションが必要です

アプリがこれらの変更にどのように対応するかを確認するには、アプリで StrictMode を使用します。Intent の使用違反に関する詳細なログを表示するには、次のメソッドを追加します。

Kotlin

fun onCreate() {
    StrictMode.setVmPolicy(VmPolicy.Builder()
        .detectUnsafeIntentLaunch()
        .build()
    )
}

Java

public void onCreate() {
    StrictMode.setVmPolicy(new VmPolicy.Builder()
            .detectUnsafeIntentLaunch()
            .build());
}

ユーザー エクスペリエンスとシステム UI

Android 15 には、より一貫性のある直感的なユーザー エクスペリエンスを実現するための変更が含まれています。

ウィンドウ インセットの変更

There are two changes related to window insets in Android 15: edge-to-edge is enforced by default, and there are also configuration changes, such as the default configuration of system bars.

Edge-to-edge enforcement

Apps are edge-to-edge by default on devices running Android 15 if the app is targeting Android 15 (API level 35).

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.


An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. This app mostly uses Material 3 Compose Components that automatically apply insets. This screen is not negatively impacted by the Android 15 edge-to-edge enforcement.

This is a breaking change that might negatively impact your app's UI. The changes affect the following UI areas:

  • Gesture handle navigation bar
    • Transparent by default.
    • Bottom offset is disabled so content draws behind the system navigation bar unless insets are applied.
    • setNavigationBarColor and R.attr#navigationBarColor are deprecated and don't affect gesture navigation.
    • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced continue to have no effect on gesture navigation.
  • 3-button navigation
    • Opacity set to 80% by default, with color possibly matching the window background.
    • Bottom offset disabled so content draws behind the system navigation bar unless insets are applied.
    • setNavigationBarColor and R.attr#navigationBarColor are set to match the window background by default. The window background must be a color drawable for this default to apply. This API is deprecated but continues to affect 3-button navigation.
    • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced is true by default, which adds an 80% opaque background across 3-button navigation.
  • Status bar
    • Transparent by default.
    • The top offset is disabled so content draws behind the status bar unless insets are applied.
    • setStatusBarColor and R.attr#statusBarColor are deprecated and have no effect on Android 15.
    • setStatusBarContrastEnforced and R.attr#statusBarContrastEnforced are deprecated but still have an effect on Android 15.
  • Display cutout
    • layoutInDisplayCutoutMode of non-floating windows must be LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. SHORT_EDGES, NEVER, and DEFAULT are interpreted as ALWAYS so that users don't see a black bar caused by the display cutout and appear edge-to-edge.

The following example shows an app before and after targeting Android 15 (API level 35), and before and after applying insets. This example is not comprehensive, this might appear differently on Android Auto.

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.
An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. However, many elements are now hidden by the status bar, 3-button navigation bar, or display cutout due to the Android 15 edge-to-edge enforcements. Hidden UI includes the Material 2 top app bar, floating action buttons, and list items.
An app that targets Android 15 (API level 35), is edge to edge on an Android 15 device and applies insets so that UI is not hidden.
What to check if your app is already edge-to-edge

If your app is already edge-to-edge and applies insets, you are mostly unimpacted, except in the following scenarios. However, even if you think you aren't impacted, we recommend you test your app.

  • You have a non-floating window, such as an Activity that uses SHORT_EDGES, NEVER or DEFAULT instead of LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. If your app crashes on launch, this might be due to your splashscreen. You can either upgrade the core splashscreen dependency to 1.2.0-alpha01 or later or set window.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always.
  • There might be lower-traffic screens with occluded UI. Verify these less-visited screens don't have occluded UI. Lower-traffic screens include:
    • Onboarding or sign-in screens
    • Settings pages
What to check if your app is not already edge-to-edge

If your app is not already edge-to-edge, you are most likely impacted. In addition to the scenarios for apps that are already edge-to-edge, you should consider the following:

  • If your app uses Material 3 Components ( androidx.compose.material3) in compose, such as TopAppBar, BottomAppBar, and NavigationBar, these components are likely not impacted because they automatically handle insets.
  • If your app is using Material 2 Components ( androidx.compose.material) in Compose, these components don't automatically handle insets. However, you can get access to the insets and apply them manually. In androidx.compose.material 1.6.0 and later, use the windowInsets parameter to apply the insets manually for BottomAppBar, TopAppBar, BottomNavigation, and NavigationRail. Likewise, use the contentWindowInsets parameter for Scaffold.
  • If your app uses views and Material Components (com.google.android.material), most views-based Material Components such as BottomNavigationView, BottomAppBar, NavigationRailView, or NavigationView, handle insets and require no additional work. However, you need to add android:fitsSystemWindows="true" if using AppBarLayout.
  • For custom composables, apply the insets manually as padding. If your content is within a Scaffold, you can consume insets using the Scaffold padding values. Otherwise, apply padding using one of the WindowInsets.
  • If your app is using views and BottomSheet, SideSheet or custom containers, apply padding using ViewCompat.setOnApplyWindowInsetsListener. For RecyclerView, apply padding using this listener and also add clipToPadding="false".
What to check if your app must offer custom background protection

If your app must offer custom background protection to 3-button navigation or the status bar, your app should place a composable or view behind the system bar using WindowInsets.Type#tappableElement() to get the 3-button navigation bar height or WindowInsets.Type#statusBars.

Additional edge-to-edge resources

See the Edge to Edge Views and Edge to Edge Compose guides for additional considerations on applying insets.

Deprecated APIs

The following APIs are deprecated but not disabled:

The following APIs are deprecated and disabled:

Stable configuration

アプリが Android 15(API レベル 35)以上をターゲットにしている場合、Configuration はシステムバーを除外しません。レイアウトの計算に Configuration クラスの画面サイズを使用している場合は、必要に応じて適切な ViewGroupWindowInsetsWindowMetricsCalculator などのより良い代替手段に置き換える必要があります。

Configuration は API 1 以降で利用可能です。通常は Activity.onConfigurationChanged から取得します。ウィンドウの密度、向き、サイズなどの情報が提供されます。Configuration から返されるウィンドウ サイズの重要な特徴の 1 つは、以前はシステムバーが除外されていたことです。

構成サイズは通常、/res/layout-h500dp などのリソース選択に使用されますが、これは依然として有効なユースケースです。ただし、レイアウトの計算に使用することは常に推奨されていません。その場合は、今すぐ離れてください。ユースケースに応じて、Configuration の使用をより適切なものに置き換える必要があります。

レイアウトの計算に使用する場合は、CoordinatorLayoutConstraintLayout などの適切な ViewGroup を使用します。システム ナビバーの高さを決定するために使用する場合は、WindowInsets を使用します。アプリ ウィンドウの現在のサイズを知りたい場合は、computeCurrentWindowMetrics を使用します。

この変更の影響を受けるフィールドは次のとおりです。

  • Configuration.screenWidthDp サイズと screenHeightDp サイズでシステムバーが除外されなくなりました。
  • Configuration.smallestScreenWidthDp は、screenWidthDpscreenHeightDp の変更の影響を間接的に受けます。
  • Configuration.orientation は、ほぼ正方形のデバイスで screenWidthDpscreenHeightDp の変更の影響を間接的に受けます。
  • Display.getSize(Point) は、Configuration の変更の影響を間接的に受けます。これは API レベル 30 以降で非推奨になりました。
  • Display.getMetrics() は、API レベル 33 以降、すでにこの動作をしています。

elegantTextHeight 属性のデフォルト値が true になりました

For apps targeting Android 15 (API level 35), the elegantTextHeight TextView attribute becomes true by default, replacing the compact font used by default with some scripts that have large vertical metrics with one that is much more readable. The compact font was introduced to prevent breaking layouts; Android 13 (API level 33) prevents many of these breakages by allowing the text layout to stretch the vertical height utilizing the fallbackLineSpacing attribute.

In Android 15, the compact font still remains in the system, so your app can set elegantTextHeight to false to get the same behavior as before, but it is unlikely to be supported in upcoming releases. So, if your app supports the following scripts: Arabic, Lao, Myanmar, Tamil, Gujarati, Kannada, Malayalam, Odia, Telugu or Thai, test your app by setting elegantTextHeight to true.

elegantTextHeight behavior for apps targeting Android 14 (API level 34) and lower.
elegantTextHeight behavior for apps targeting Android 15.

複雑な文字の形状に合わせて TextView の幅が変更される

Android の以前のバージョンでは、複雑なシェーピングを持つ一部の筆記体フォントや言語では、文字が前の文字または次の文字の領域に描画されることがあります。場合によっては、このような文字の開始位置や終了位置が切り詰められていました。Android 15 以降では、TextView はこのような文字に十分なスペースを描画するための幅を割り当て、アプリがクリッピングを防ぐために左側に追加の余白をリクエストできるようにします。

この変更は TextView が幅を決定する方法に影響するため、アプリが Android 15(API レベル 35)以降をターゲットとしている場合、TextView はデフォルトでより多くの幅を割り当てます。この動作を有効または無効にするには、TextViewsetUseBoundsForWidth API を呼び出します。

左側の余白を追加すると、既存のレイアウトの位置がずれる可能性があるため、Android 15 以降をターゲットとするアプリでも、デフォルトでは余白は追加されません。ただし、setShiftDrawingOffsetForStartOverhang を呼び出すことで、クリッピングを防ぐためにパディングを追加できます。

次の例は、これらの変更によって、一部のフォントと言語のテキスト レイアウトがどのように改善されるかを示しています。

英語のテキストを筆記体フォントで表示する場合の標準レイアウト。一部の文字が切り取られている。対応する XML は次のとおりです。

<TextView
    android:fontFamily="cursive"
    android:text="java" />
同じ英語のテキストのレイアウト。幅とパディングが追加されています。対応する XML は次のとおりです。

<TextView
    android:fontFamily="cursive"
    android:text="java"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />
タイ語テキストの標準レイアウト。一部の文字が切り取られている。 対応する XML は次のとおりです。

<TextView
    android:text="คอมพิวเตอร์" />
幅とパディングを追加した、同じタイ語のテキストのレイアウト。対応する XML は次のとおりです。

<TextView
    android:text="คอมพิวเตอร์"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

EditText のロケール対応のデフォルトの行の高さ

以前のバージョンの Android では、テキスト レイアウトは、現在の言語 / 地域に一致するフォントの行の高さに合うようにテキストの高さを伸ばしていました。たとえば、コンテンツが日本語の場合、日本語フォントの行間がラテン文字フォントよりも少し大きいため、テキストの高さが少し大きくなっていました。ただし、次の画像に示すように、このような行の高さの違いにもかかわらず、EditText 要素は、使用されている言語 / 地域に関係なく、均一にサイズ設定されていました。

英語(en)、日本語(ja)、ビルマ語(my)のテキストを含めることができる EditText 要素を表す 3 つのボックス。これらの言語の行の高さは異なりますが、EditText の高さは同じです。

Android 15(API レベル 35)をターゲットとするアプリの場合、指定されたロケールの参照フォントに合わせて、EditText の最小行の高さが予約されるようになりました。これは次の図に示すとおりです。

英語(en)、日本語(ja)、ビルマ語(my)のテキストを含めることができる EditText 要素を表す 3 つのボックス。EditText の高さに、これらの言語のフォントのデフォルトの行の高さに対応するスペースが追加されました。

必要に応じて、useLocalePreferredLineHeightForMinimum 属性を false に指定することで、以前の動作を復元できます。また、Kotlin と Java で setMinimumFontMetrics API を使用して、カスタムの最小垂直指標を設定することもできます。

カメラとメディア

Android 15 では、Android 15 以上をターゲットとするアプリのカメラとメディアの動作が次のように変更されています。

音声フォーカス リクエストの制限

Android 15(API レベル 35)をターゲットとするアプリが音声フォーカスをリクエストするには、最上位のアプリであるか、フォアグラウンド サービスを実行している必要があります。アプリがこれらの要件のいずれかを満たしていないときにフォーカスをリクエストしようとすると、呼び出しは AUDIOFOCUS_REQUEST_FAILED を返します。

音声フォーカスの詳細については、音声フォーカスを管理するをご覧ください。

非 SDK の制限の更新

Android 15 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 15, some of these changes might not immediately affect you. However, while it's possible for your app to access some non-SDK interfaces depending on your app's target API level, using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you can't find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

Android の今回のリリースの変更について詳しくは、非 SDK インターフェースの制限に関する Android 15 での変更点をご覧ください。非 SDK インターフェース全般について詳しくは、非 SDK インターフェースの制限をご覧ください。