Al igual que las versiones anteriores, Android 15 incluye cambios de comportamiento que podrían afectar a tu app. Los siguientes cambios se aplican exclusivamente a las apps orientadas a Android 15 o versiones posteriores. Si tu app está orientada a Android 15 o versiones posteriores, debes modificarla para que admita estos comportamientos correctamente, cuando corresponda.
Asegúrate de revisar también la lista de cambios de comportamiento que afectan a todas las apps que se ejecutan en Android 15, independientemente de la targetSdkVersion
de tu app.
Funcionalidad principal
Android 15 modifica o expande varias capacidades principales del sistema Android.
Cambios en los servicios en primer plano
Realizaremos los siguientes cambios en los servicios en primer plano con Android 15.
- Nuevo tipo de servicio en primer plano de procesamiento de contenido multimedia
- Restricciones sobre los receptores de emisión de
BOOT_COMPLETED
que inician servicios en primer plano
Comportamiento del tiempo de espera del servicio en primer plano de sincronización de datos
Android 15 introduce un nuevo comportamiento de tiempo de espera en dataSync
para las apps que se orientan a Android 15 o versiones posteriores. Este comportamiento también se aplica al nuevo tipo de servicio en primer plano de mediaProcessing
.
El sistema permite que los servicios dataSync
de una app se ejecuten durante un total de 6 horas en un período de 24 horas, después de lo cual llama al método Service.onTimeout(int, int)
del servicio en ejecución (presentado en Android 15). En este momento, el servicio tiene unos segundos para llamar a Service.stopSelf()
. Cuando se llama a Service.onTimeout()
, el servicio ya no se considera un servicio en primer plano. Si el servicio no llama a Service.stopSelf()
, se producirá un error con este mensaje de error: "Un servicio en primer plano de <fgs_type> no se detuvo dentro del tiempo de espera: <component_name>". En la versión beta 2, el mensaje de error se muestra como un error de ANR, pero, en una versión beta futura, este mensaje de error arrojará una excepción personalizada.
Para evitar problemas con este cambio de comportamiento, puedes realizar una o más de las siguientes acciones:
- Haz que tu servicio implemente el nuevo método
Service.onTimeout(int, int)
. Cuando tu app reciba la devolución de llamada, asegúrate de llamar astopSelf()
en unos pocos segundos. (Si no detienes la app de inmediato, el sistema generará una falla). - Asegúrate de que los servicios
dataSync
de tu app no se ejecuten durante más de un total de 6 horas en cualquier período de 24 horas (a menos que el usuario interactúe con la app y restablezca el temporizador). - Solo inicia los servicios en primer plano
dataSync
como resultado de la interacción directa del usuario. Como tu app se encuentra en primer plano cuando se inicia el servicio, este tiene las seis horas completas una vez que la app pasa a segundo plano. - En lugar de usar un servicio en primer plano de
dataSync
, usa una API alternativa.
Si los servicios en primer plano de dataSync
de tu app se ejecutaron durante 6 horas en las últimas 24, no podrás iniciar otro servicio en primer plano de dataSync
a menos que el usuario haya llevado la app al primer plano (lo que restablece el temporizador). Si intentas iniciar otro servicio en primer plano dataSync
, el sistema arrojará una ForegroundServiceStartNotAllowedException
con un mensaje de error, como "Ya se agotó el tiempo límite para el tipo de servicio en primer plano dataSync".
Nuevo tipo de servicio en primer plano de procesamiento de contenido multimedia
Android 15 introduces a new foreground service type, mediaProcessing
. This
service type is appropriate for operations like transcoding media files. For
example, a media app might download an audio file and need to convert it to a
different format before playing it. You can use a mediaProcessing
foreground
service to make sure the conversion continues even while the app is in the
background.
The system permits an app's mediaProcessing
services to run for a total of 6
hours in a 24-hour period, after which the system calls the running service's
Service.onTimeout(int, int)
method (introduced in Android
15). At this time, the service has a few seconds to call
Service.stopSelf()
. If the service does not
call Service.stopSelf()
, a failure will occur with this error message: "A
foreground service of <fgs_type> did not stop within its timeout:
<component_name>". In Beta 2, the failure message is shown as an
ANR, but in a future Beta release, this failure message will throw a custom
exception.
To avoid getting an ANR, you can do one of the following:
- Have your service implement the new
Service.onTimeout(int, int)
method. When your app receives the callback, make sure to callstopSelf()
within a few seconds. (If you don't stop the app right away, the system generates a failure.) - Make sure your app's
mediaProcessing
services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer). - Only start
mediaProcessing
foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background. - Instead of using a
mediaProcessing
foreground service, use an alternative API, like WorkManager.
If your app's mediaProcessing
foreground services have run for 6 hours in the
last 24, you cannot start another mediaProcessing
foreground service unless
the user has brought your app to the foreground (which resets the timer). If you
try to start another mediaProcessing
foreground service, the system throws
ForegroundServiceStartNotAllowedException
with an error message like "Time limit already exhausted for foreground service
type mediaProcessing".
For more information about the mediaProcessing
service type, see Changes to
foreground service types for Android 15: Media processing.
Restricciones en los receptores de emisión de BOOT_COMPLETED
que inician servicios en primer plano
Hay nuevas restricciones en los receptores de emisión de BOOT_COMPLETED
que inician servicios en primer plano. Los receptores BOOT_COMPLETED
no tienen permitido iniciar los siguientes tipos de servicios en primer plano:
dataSync
camera
mediaPlayback
phoneCall
mediaProjection
microphone
(esta restricción se aplica amicrophone
desde Android 14)
Si un receptor BOOT_COMPLETED
intenta iniciar cualquiera de esos tipos de servicios en primer plano, el sistema arrojará ForegroundServiceStartNotAllowedException
.
Restricciones para el inicio de servicios en primer plano mientras una app conserva el permiso SYSTEM_ALERT_WINDOW
Anteriormente, si una app tenía el permiso SYSTEM_ALERT_WINDOW
, podía iniciar un servicio en primer plano incluso si estaba en segundo plano (como se explica en Exenciones de restricciones de inicio en segundo plano).
Si una app se orienta a Android 15, esta exención ahora es menor. Ahora, la app necesita tener el permiso SYSTEM_ALERT_WINDOW
y también tener una ventana superpuesta visible. Es decir, la app debe iniciar primero una ventana TYPE_APPLICATION_OVERLAY
, y esta debe ser visible antes de iniciar un servicio en primer plano.
Si tu app intenta iniciar un servicio en primer plano desde el segundo plano sin cumplir con estos nuevos requisitos (y no tiene alguna otra exención), el sistema arrojará una ForegroundServiceStartNotAllowedException
.
Si tu app declara el permiso SYSTEM_ALERT_WINDOW
e inicia servicios en primer plano desde el segundo plano, es posible que este cambio la afecte. Si tu app obtiene un ForegroundServiceStartNotAllowedException
, verifica el orden de operaciones y asegúrate de que ya tenga una ventana superpuesta activa antes de intentar iniciar un servicio en primer plano en segundo plano. Para comprobar si la ventana de superposición es visible actualmente, llama a View.getWindowVisibility()
. También puedes anular View.onWindowVisibilityChanged()
para recibir notificaciones cada vez que cambie la visibilidad.
Cambios en la capacidad de las apps para modificar el estado global del modo No interrumpir
Apps that target Android 15 can no longer change the global state or policy of
Do Not Disturb (DND) on a device (either by modifying user settings, or turning
off DND mode). Instead, apps must contribute an AutomaticZenRule
, which
the system combines into a global policy with the existing
most-restrictive-policy-wins scheme. Calls to existing APIs that previously
affected global state (setInterruptionFilter
,
setNotificationPolicy
) result in the creation or update of an
implicit AutomaticZenRule
, which is toggled on and off depending on the
call-cycle of those API calls.
Note that this change only affects observable behavior if the app is calling
setInterruptionFilter(INTERRUPTION_FILTER_ALL)
and expects that call to
deactivate an AutomaticZenRule
that was previously activated by their owners.
Cambios en OpenJDK 17
Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.
One of these changes can affect app compatibility for apps targeting Android 15:
Changes to string formatting APIs: Validation of argument index, flags, width, and precision are now more strict when using the following
String.format()
andFormatter.format()
APIs:String.format(String, Object[])
String.format(Locale, String, Object[])
Formatter.format(String, Object[])
Formatter.format(Locale, String, Object[])
For example, the following exception is thrown when an argument index of 0 is used (
%0
in the format string):IllegalFormatArgumentIndexException: Illegal format argument index = 0
In this case, the issue can be fixed by using an argument index of 1 (
%1
in the format string).Changes to component type of
Arrays.asList(...).toArray()
: When usingArrays.asList(...).toArray()
, the component type of the resulting array is now anObject
—not the type of the underlying array's elements. So the following code throws aClassCastException
:String[] elements = (String[]) Arrays.asList("one", "two").toArray();
For this case, to preserve
String
as the component type in the resulting array, you could useCollection.toArray(Object[])
instead:String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
Changes to language code handling: When using the
Locale
API, language codes for Hebrew, Yiddish, and Indonesian are no longer converted to their obsolete forms (Hebrew:iw
, Yiddish:ji
, and Indonesian:in
). When specifying the language code for one of these locales, use the codes from ISO 639-1 instead (Hebrew:he
, Yiddish:yi
, and Indonesian:id
).Changes to random int sequences: Following the changes made in https://bugs.openjdk.org/browse/JDK-8301574, the following
Random.ints()
methods now return a different sequence of numbers than theRandom.nextInt()
methods do:Generally, this change shouldn't result in app-breaking behavior, but your code shouldn't expect the sequence generated from
Random.ints()
methods to matchRandom.nextInt()
.
Seguridad
Android 15 incluye cambios que promueven la seguridad del sistema para proteger a los usuarios y las apps de apps maliciosas.
Lanzamientos seguros de actividades en segundo plano
Android 15 protects users from malicious apps and gives them more control over their devices by adding changes that prevent malicious background apps from bringing other apps to the foreground, elevating their privileges, and abusing user interaction. Background activity launches have been restricted since Android 10 (API level 29).
Block apps that don't match the top UID on the stack from launching activities
Malicious apps can launch another app's activity within the same task, then
overlay themselves on top, creating the illusion of being that app. This "task
hijacking" attack bypasses current background launch restrictions because it all
occurs within the same visible task. To mitigate this risk, Android 15 adds a
flag that blocks apps that don't match the top UID on the stack from launching
activities. To opt in for all of your app's activities, update the
allowCrossUidActivitySwitchFromBelow
attribute in your app's AndroidManifest.xml
file:
<application android:allowCrossUidActivitySwitchFromBelow="false" >
The new security measures are active if all of the following are true:
- The app performing the launch targets Android 15.
- The app on top of the task stack targets Android 15.
- Any visible activity has opted in to the new protections
If the security measures are enabled, apps might return home, rather than the last visible app, if they finish their own task.
Other changes
In addition to the restriction for UID matching, these other changes are also included:
- Change
PendingIntent
creators to block background activity launches by default. This helps prevent apps from accidentally creating aPendingIntent
that could be abused by malicious actors. - Don't bring an app to the foreground unless the
PendingIntent
sender allows it. This change aims to prevent malicious apps from abusing the ability to start activities in the background. By default, apps are not allowed to bring the task stack to the foreground unless the creator allows background activity launch privileges or the sender has background activity launch privileges. - Control how the top activity of a task stack can finish its task. If the top activity finishes a task, Android will go back to whichever task was last active. Moreover, if a non-top activity finishes its task, Android will go back to the home screen; it won't block the finish of this non-top activity.
- Prevent launching arbitrary activities from other apps into your own task. This change prevents malicious apps from phishing users by creating activities that appear to be from other apps.
- Block non-visible windows from being considered for background activity launches. This helps prevent malicious apps from abusing background activity launches to display unwanted or malicious content to users.
Intents más seguros
Android 15 introduces new security measures to make intents safer and more robust. These changes are aimed at preventing potential vulnerabilities and misuse of intents that can be exploited by malicious apps. There are two main improvements to the security of intents in Android 15:
- Match target intent-filters: Intents that target specific components must accurately match the target's intent-filter specifications. If you send an intent to launch another app's activity, the target intent component needs to align with the receiving activity's declared intent-filters.
- Intents must have actions: Intents without an action will no longer match any intent-filters. This means that intents used to start activities or services must have a clearly defined action.
Kotlin
fun onCreate() { StrictMode.setVmPolicy(VmPolicy.Builder() .detectUnsafeIntentLaunch() .build() ) }
Java
public void onCreate() { StrictMode.setVmPolicy(new VmPolicy.Builder() .detectUnsafeIntentLaunch() .build()); }
IU del sistema y experiencia del usuario
Android 15 incluye algunos cambios destinados a crear una experiencia del usuario más intuitiva y coherente.
Cambios en la inserción de ventana
Hay dos cambios relacionados con las inserciones de ventana en Android 15: de borde a borde se aplica de forma predeterminada, y también hay cambios de configuración, como la configuración predeterminada de las barras del sistema.
Aplicación de borde a borde
Apps are edge-to-edge by default on devices running Android 15 if the app is targeting Android 15.
This is a breaking change that might negatively impact your app's UI. The changes affect the following UI areas:
- Gesture handle navigation bar
- Transparent by default.
- Bottom offset is disabled so content draws behind the system navigation bar unless insets are applied.
setNavigationBarColor
andR.attr#navigationBarColor
are deprecated and don't affect gesture navigation.setNavigationBarContrastEnforced
andR.attr#navigationBarContrastEnforced
continue to have no effect on gesture navigation.
- 3-button navigation
- Opacity set to 80% by default, with color possibly matching the window background.
- Bottom offset disabled so content draws behind the system navigation bar unless insets are applied.
setNavigationBarColor
andR.attr#navigationBarColor
are set to match the window background by default. The window background must be a color drawable for this default to apply. This API is deprecated but continues to affect 3-button navigation.setNavigationBarContrastEnforced
andR.attr#navigationBarContrastEnforced
is true by default, which adds an 80% opaque background across 3-button navigation.
- Status bar
- Transparent by default.
- The top offset is disabled so content draws behind the status bar unless insets are applied.
setStatusBarColor
andR.attr#statusBarColor
are deprecated and have no effect on Android 15.setStatusBarContrastEnforced
andR.attr#statusBarContrastEnforced
are deprecated but still have an effect on Android 15.
- Display cutout
layoutInDisplayCutoutMode
of non-floating windows must beLAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
.SHORT_EDGES
,NEVER
andDEFAULT
are interpreted asALWAYS
so that users don't see a Black bar caused by the display cutout and appear edge-to-edge.
The following example shows an app before and after targeting Android 15, and before and after applying insets.
What to check if your app is already edge-to-edge
If your app is already edge-to-edge and applies insets, you are mostly unimpacted, except in the following scenarios. However, even if you think you aren't impacted, we recommend you test your app.
- You have a non-floating window, such as an
Activity
that usesSHORT_EDGES
,NEVER
orDEFAULT
instead ofLAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
. If your app crashes on launch, this might be due to your splashscreen. You can either upgrade the core splashscreen dependency to 1.2.0-alpha01 or later or setwindow.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always
. - There might be lower-traffic screens with occluded UI. Verify these
less-visited screens don't have occluded UI. Lower-traffic screens include:
- Onboarding or sign-in screens
- Settings pages
What to check if your app is not already edge-to-edge
If your app is not already edge-to-edge, you are most likely impacted. In addition to the scenarios for apps that are already edge-to-edge, you should consider the following:
- If your app uses Material 3 Components (
androidx.compose.material3
) in compose, such asTopAppBar
,BottomAppBar
, andNavigationBar
, these components are likely not impacted because they automatically handle insets. - If your app is using Material 2 Components (
androidx.compose.material
) in Compose, these components don't automatically handle insets. However, you can get access to the insets and apply them manually. In androidx.compose.material 1.6.0 and later, use thewindowInsets
parameter to apply the insets manually forBottomAppBar
,TopAppBar
,BottomNavigation
, andNavigationRail
. Likewise, use thecontentWindowInsets
parameter forScaffold
. - If your app uses views and Material Components
(
com.google.android.material
), most views-based Material Components such asBottomNavigationView
,BottomAppBar
,NavigationRailView
, orNavigationView
, handle insets and require no additional work. However, you need to addandroid:fitsSystemWindows="true"
if usingAppBarLayout
. - For custom composables, apply the insets manually as padding. If your
content is within a
Scaffold
, you can consume insets using theScaffold
padding values. Otherwise, apply padding using one of theWindowInsets
. - If your app is using views and
BottomSheet
,SideSheet
or custom containers, apply padding usingViewCompat.setOnApplyWindowInsetsListener
. ForRecyclerView
, apply padding using this listener and also addclipToPadding="false"
.
What to check if your app must offer custom background protection
If your app must offer custom background protection to 3-button navigation or
the status bar, you app should place a composable or view behind the system bar
using WindowInsets.Type#tappableElement()
to get the 3-button
navigation bar height or WindowInsets.Type#statusBars
.
Additional edge-to-edge resources
See the Edge to Edge Views and Edge to Edge Compose guides for additional considerations on applying insets.
Deprecated APIs
The following APIs are now deprecated:
R.attr#enforceStatusBarContrast
R.attr#navigationBarColor
R.attr#navigationBarDividerColor
R.attr#statusBarColor
Window#getNavigationBarColor
Window#getNavigationBarDividerColor
Window#getStatusBarColor
Window#isStatusBarContrastEnforced
Window#setDecorFitsSystemWindows
Window#setNavigationBarColor
Window#setNavigationBarDividerColor
Window#setStatusBarColor
Window#setStatusBarContrastEnforced
Configuración estable
Si tu app se orienta a Android 15 o versiones posteriores, Configuration
ya no excluye las barras del sistema. Si usas el tamaño de pantalla en la clase Configuration
para el cálculo del diseño, debes reemplazarlo por alternativas mejores, como ViewGroup
, WindowInsets
o WindowMetricsCalculator
, según tus necesidades.
Configuration
está disponible desde la API 1. Por lo general, se obtiene de Activity.onConfigurationChanged
. Proporciona información como la densidad, la orientación y los tamaños de las ventanas. Una característica importante sobre los tamaños de ventana que muestra Configuration
es que antes excluía las barras del sistema.
El tamaño de la configuración se suele usar para la selección de recursos, como /res/layout-h500dp
, y este sigue siendo un caso de uso válido. Sin embargo, siempre no se recomienda su uso para el cálculo del diseño. Si lo haces, debes dejar de hacerlo ahora. Debes reemplazar el uso de Configuration
por algo más adecuado según tu caso de uso.
Si la usas para calcular el diseño, utiliza un ViewGroup
apropiado, como CoordinatorLayout
o ConstraintLayout
. Si la usas para determinar la altura de la barra de navegación del sistema, utiliza WindowInsets
. Si deseas conocer el tamaño actual de la ventana de tu app, usa computeCurrentWindowMetrics
.
En la siguiente lista, se describen los campos afectados por este cambio:
- Los tamaños
Configuration.screenWidthDp
yscreenHeightDp
ya no excluyen las barras del sistema. Configuration.smallestScreenWidthDp
se ve afectado indirectamente por los cambios enscreenWidthDp
yscreenHeightDp
.Configuration.orientation
se ve afectada indirectamente por los cambios enscreenWidthDp
yscreenHeightDp
en dispositivos casi cuadrados.Display.getSize(Point)
se ve afectado indirectamente por los cambios enConfiguration
. Esta función dejó de estar disponible a partir del nivel de API 30.Display.getMetrics()
ya funciona de esta manera desde el nivel de API 33.
El atributo eleganteTextHeight se establece en verdadero de forma predeterminada.
En el caso de las apps orientadas a Android 15, el atributo TextView
elegantTextHeight
se convierte en true
de forma predeterminada, lo que reemplaza la fuente compacta de forma predeterminada con algunas secuencias de comandos que tienen métricas verticales grandes por una mucho más legible. La fuente compacta se introdujo para evitar diseños rotos. Android 13 (nivel de API 33) evita muchas de estas fallas permitiendo que el diseño de texto estire la altura vertical con el atributo fallbackLineSpacing
.
En Android 15, la fuente compacta aún permanece en el sistema, por lo que tu app puede establecer elegantTextHeight
en false
para obtener el mismo comportamiento que antes, pero es poco probable que se admita en próximas versiones. Por lo tanto, si tu app admite las siguientes secuencias de comandos: árabe, laosiano, Birmania, tamil, guyaratí, canarés, malabar, oriya, telugu o tailandés, configura elegantTextHeight
en true
para probar la app.
Cambios en el ancho de TextView para formas de letras complejas
In previous versions of Android, some cursive fonts or languages that have
complex shaping might draw the letters in the previous or next character's area.
In some cases, such letters were clipped at the beginning or ending position.
Starting in Android 15, a TextView
allocates width for drawing enough space
for such letters and allows apps to request extra paddings to the left to
prevent clipping.
Because this change affects how a TextView
decides the width, TextView
allocates more width by default if the app targets Android 15 or higher. You can
enable or disable this behavior by calling the setUseBoundsForWidth
API on
TextView
.
Because adding left padding might cause a misalignment for existing layouts, the
padding is not added by default even for apps that target Android 15 or higher.
However, you can add extra padding to preventing clipping by calling
setShiftDrawingOffsetForStartOverhang
.
The following examples show how these changes can improve text layout for some fonts and languages.
Altura de línea predeterminada en función de la configuración regional para EditText
En las versiones anteriores de Android, el diseño de texto estiraba la altura del texto para cumplir con la altura de la línea de la fuente que coincidía con la configuración regional actual. Por ejemplo, si el contenido estaba en japonés, debido a que la altura de la línea de la fuente japonesa es ligeramente mayor que la de una fuente latina, la altura del texto se agrandó un poco más grande. Sin embargo, a pesar de estas diferencias en las alturas de las líneas, el tamaño del elemento EditText
se dimensionó de manera uniforme, independientemente de la configuración regional que se usara, como se ilustra en la siguiente imagen:
En el caso de las apps orientadas a Android 15, ahora se reserva una altura de línea mínima para que EditText
coincida con la fuente de referencia de la configuración regional especificada, como se muestra en la siguiente imagen:
Si es necesario, tu app puede restablecer el comportamiento anterior especificando el atributo useLocalePreferredLineHeightForMinimum
en false
, y tu app puede establecer métricas verticales mínimas personalizadas con la API de setMinimumFontMetrics
en Kotlin y Java.
Cámara y contenido multimedia
En Android 15, se realizan los siguientes cambios en el comportamiento de la cámara y el contenido multimedia para las apps orientadas a Android 15 o versiones posteriores.
Restricciones para solicitar foco de audio
Las apps orientadas a Android 15 deben ser la app principal o ejecutar un servicio en primer plano relacionado con el audio para solicitar el foco de audio. Si una app intenta solicitar el foco cuando no cumple con uno de estos requisitos, la llamada mostrará AUDIOFOCUS_REQUEST_FAILED
.
Un servicio en primer plano se considera relacionado con el audio si su tipo es mediaPlayback
, camera
, microphone
o phoneCall
.
Puedes obtener más información sobre el foco de audio en Cómo administrar el foco de audio.
Actualización de restricciones que no pertenecen al SDK
Android 15 incluye listas actualizadas de este tipo de interfaces que están basadas en la colaboración con desarrolladores de Android y las pruebas internas más recientes. Siempre que sea posible, nos aseguramos de que las alternativas públicas estén disponibles antes de restringir las interfaces que no pertenecen al SDK.
Si tu app no está orientada a Android 15, es posible que algunos de estos cambios no te afecten de inmediato. Sin embargo, aunque es posible que tu app acceda a algunas interfaces que no pertenecen al SDK según el nivel de API al que está orientada tu app, usar cualquier método o campo que no pertenece al SDK siempre implica un gran riesgo de error para tu app.
Si no sabes con certeza si tu app usa este tipo de interfaces, puedes probarla para averiguarlo. Si tu app depende de interfaces que no pertenecen al SDK, debes comenzar a planificar una migración hacia otras alternativas SDK. Sin embargo, sabemos que algunas apps tienen casos de uso válidos para usar interfaces que no pertenecen al SDK. Si no encuentras una alternativa para reemplazar el uso de una interfaz que no pertenece al SDK para una función de tu app, deberías solicitar una nueva API pública.
Para obtener más información sobre los cambios implementados en esta versión de Android, consulta Actualizaciones a las restricciones de interfaces que no pertenecen al SDK en Android 15. Para obtener más información sobre interfaces que no pertenecen al SDK en general, consulta Restricciones en interfaces que no pertenecen al SDK.