व्यवहार में बदलाव: Android 14 या उसके बाद के वर्शन को टारगेट करने वाले ऐप्लिकेशन

Android 14 में, पिछले वर्शन की तरह ही कुछ ऐसे बदलाव किए गए हैं जो आपके ऐप्लिकेशन पर असर डाल सकते हैं. यहां दिए गए बदलाव, सिर्फ़ उन ऐप्लिकेशन पर लागू होते हैं जो Android 14 (एपीआई लेवल 34) या इसके बाद के वर्शन को टारगेट कर रहे हैं. अगर आपका ऐप्लिकेशन, Android 14 या इसके बाद के वर्शन को टारगेट कर रहा है, तो आपको अपने ऐप्लिकेशन में बदलाव करके, इन बदलावों के हिसाब से काम करने की सुविधा जोड़नी चाहिए.

साथ ही, आपको उन बदलावों की सूची भी देखनी चाहिए जो Android 14 पर चलने वाले सभी ऐप्लिकेशन पर लागू होते हैं. भले ही, ऐप्लिकेशन का targetSdkVersionकुछ भी हो.

मुख्य फ़ंक्शन

फ़ोरग्राउंड सेवा के टाइप की जानकारी देना ज़रूरी है

If your app targets Android 14 (API level 34) or higher, it must specify at least one foreground service type for each foreground service within your app. You should choose a foreground service type that represents your app's use case. The system expects foreground services that have a particular type to satisfy a particular use case.

If a use case in your app isn't associated with any of these types, it's strongly recommended that you migrate your logic to use WorkManager or user-initiated data transfer jobs.

BluetoothAdapter में BLUETOOTH_CONNECT अनुमति लागू करना

Android 14 (एपीआई लेवल 34) या उसके बाद के वर्शन को टारगेट करने वाले ऐप्लिकेशन के लिए, BluetoothAdapter getProfileConnectionState() तरीके को कॉल करते समय Android 14, BLUETOOTH_CONNECT अनुमति को लागू करता है.

इस तरीके के लिए BLUETOOTH_CONNECT अनुमति की ज़रूरत पहले से ही थी. हालांकि, ऐसा करना ज़रूरी नहीं किया गया. पक्का करें कि आपके ऐप्लिकेशन की AndroidManifest.xml फ़ाइल में, BLUETOOTH_CONNECT के बारे में जानकारी दी गई हो. यह जानकारी, यहां दिए गए स्निपेट में दिखाई गई है. साथ ही, getProfileConnectionState को कॉल करने से पहले, देख लें कि उपयोगकर्ता ने अनुमति दी है या नहीं.

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

OpenJDK 17 के अपडेट

Android 14 में, Android की मुख्य लाइब्रेरी को अपडेट करने की प्रोसेस जारी है, ताकि इसे OpenJDK LTS के नए वर्शन की सुविधाओं के साथ अलाइन किया जा सके. इसमें, ऐप्लिकेशन और प्लैटफ़ॉर्म डेवलपर के लिए, लाइब्रेरी के अपडेट और Java 17 भाषा की सहायता, दोनों शामिल हैं.

इनमें से कुछ बदलावों का असर, ऐप्लिकेशन के साथ काम करने की सुविधा पर पड़ सकता है:

  • रेगुलर एक्सप्रेशन में बदलाव: OpenJDK के सेमेंटेक्स को ज़्यादा बारीकी से फ़ॉलो करने के लिए, अब अमान्य ग्रुप रेफ़रंस का इस्तेमाल करने की अनुमति नहीं है. आपको ऐसे नए मामले दिख सकते हैं जहां java.util.regex.Matcher क्लास से IllegalArgumentException ट्रिगर होता है. इसलिए, रेगुलर एक्सप्रेशन का इस्तेमाल करने वाले हिस्सों के लिए, अपने ऐप्लिकेशन की जांच करना न भूलें. जांच के दौरान इस बदलाव को चालू या बंद करने के लिए, कंपैटिबिलिटी फ़्रेमवर्क टूल का इस्तेमाल करके, DISALLOW_INVALID_GROUP_REFERENCE फ़्लैग को टॉगल करें.
  • यूनीक आइडेंटिफ़ायर (यूयूआईडी) मैनेज करना: java.util.UUID.fromString() तरीका अब इनपुट आर्ग्युमेंट की पुष्टि करते समय, ज़्यादा सख्त जांच करता है. इसलिए, आपको डेसिरियलाइज़ेशन के दौरान IllegalArgumentException दिख सकता है. टेस्टिंग के दौरान इस बदलाव को चालू या बंद करने के लिए, साथ काम करने की सुविधा वाले फ़्रेमवर्क टूल का इस्तेमाल करके, ENABLE_STRICT_VALIDATION फ़्लैग को टॉगल करें.
  • ProGuard से जुड़ी समस्याएं: कुछ मामलों में, ProGuard का इस्तेमाल करके अपने ऐप्लिकेशन को छोटा करने, उसे कोड करने, और ऑप्टिमाइज़ करने पर, java.lang.ClassValue क्लास जोड़ने से समस्या आ सकती है. यह समस्या, Kotlin की एक लाइब्रेरी की वजह से होती है. यह लाइब्रेरी, Class.forName("java.lang.ClassValue") के क्लास दिखाने या न दिखाने के आधार पर, रनटाइम के व्यवहार में बदलाव करती है. अगर आपका ऐप्लिकेशन, रनटाइम के पुराने वर्शन के लिए डेवलप किया गया था और उसमें java.lang.ClassValue क्लास उपलब्ध नहीं थी, तो इन ऑप्टिमाइज़ेशन की वजह से java.lang.ClassValue से ली गई क्लास से computeValue तरीका हट सकता है.

JobScheduler, कॉलबैक और नेटवर्क के व्यवहार को बेहतर बनाता है

Since its introduction, JobScheduler expects your app to return from onStartJob or onStopJob within a few seconds. Prior to Android 14, if a job runs too long, the job is stopped and fails silently. If your app targets Android 14 (API level 34) or higher and exceeds the granted time on the main thread, the app triggers an ANR with the error message "No response to onStartJob" or "No response to onStopJob".

This ANR may be a result of 2 scenarios: 1. There is work blocking the main thread, preventing the callbacks onStartJob or onStopJob from executing and completing within the expected time limit. 2. The developer is running blocking work within the JobScheduler callback onStartJob or onStopJob, preventing the callback from completing within the expected time limit.

To address #1, you will need to further debug what is blocking the main thread when the ANR occurs, you can do this using ApplicationExitInfo#getTraceInputStream() to get the tombstone trace when the ANR occurs. If you're able to manually reproduce the ANR, you can record a system trace and inspect the trace using either Android Studio or Perfetto to better understand what is running on the main thread when the ANR occurs. Note that this can happen when using JobScheduler API directly or using the androidx library WorkManager.

To address #2, consider migrating to WorkManager, which provides support for wrapping any processing in onStartJob or onStopJob in an asynchronous thread.

JobScheduler also introduces a requirement to declare the ACCESS_NETWORK_STATE permission if using setRequiredNetworkType or setRequiredNetwork constraint. If your app does not declare the ACCESS_NETWORK_STATE permission when scheduling the job and is targeting Android 14 or higher, it will result in a SecurityException.

Tiles launch API

14 साल और उससे ज़्यादा उम्र के लोगों को टारगेट करने वाले ऐप्लिकेशन के लिए, TileService#startActivityAndCollapse(Intent) के इस्तेमाल पर रोक लगा दी गई है और अब यह गड़बड़ी कर रहा है एक अपवाद हो सकता है. अगर आपका ऐप्लिकेशन टाइल से गतिविधियां लॉन्च करता है, तो इस्तेमाल करें इसके बजाय, TileService#startActivityAndCollapse(PendingIntent) का इस्तेमाल करें.

निजता

फ़ोटो और वीडियो के आंशिक ऐक्सेस की सुविधा

Android 14 introduces Selected Photos Access, which allows users to grant apps access to specific images and videos in their library, rather than granting access to all media of a given type.

This change is only enabled if your app targets Android 14 (API level 34) or higher. If you don't use the photo picker yet, we recommend implementing it in your app to provide a consistent experience for selecting images and videos that also enhances user privacy without having to request any storage permissions.

If you maintain your own gallery picker using storage permissions and need to maintain full control over your implementation, adapt your implementation to use the new READ_MEDIA_VISUAL_USER_SELECTED permission. If your app doesn't use the new permission, the system runs your app in a compatibility mode.

उपयोगकर्ता अनुभव

पूरी स्क्रीन पर दिखने वाली Intent सूचनाएं सुरक्षित करना

With Android 11 (API level 30), it was possible for any app to use Notification.Builder.setFullScreenIntent to send full-screen intents while the phone is locked. You could auto-grant this on app install by declaring USE_FULL_SCREEN_INTENT permission in the AndroidManifest.

Full-screen intent notifications are designed for extremely high-priority notifications demanding the user's immediate attention, such as an incoming phone call or alarm clock settings configured by the user. For apps targeting Android 14 (API level 34) or higher, apps that are allowed to use this permission are limited to those that provide calling and alarms only. The Google Play Store revokes default USE_FULL_SCREEN_INTENT permissions for any apps that don't fit this profile. The deadline for these policy changes is May 31, 2024.

This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.

You can use the new API NotificationManager.canUseFullScreenIntent to check if your app has the permission; if not, your app can use the new intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT to launch the settings page where users can grant the permission.

सुरक्षा

इम्प्लिसिट और पेंडिंग इंटेंट पर पाबंदियां

For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:

  • Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
  • If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.

These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.

For example, here is an intent filter that could be declared in your app's manifest file:

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

If your app tried to launch this activity using an implicit intent, an ActivityNotFoundException exception would be thrown:

Kotlin

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

To launch the non-exported activity, your app should use an explicit intent instead:

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

रनटाइम के दौरान रजिस्टर किए गए ब्रॉडकास्ट रिसीवर के लिए, एक्सपोर्ट करने के तरीके की जानकारी देना ज़रूरी है

Android 14 (एपीआई लेवल 34) या उसके बाद के वर्शन को टारगेट करने वाले और कॉन्टेक्स्ट के हिसाब से रजिस्टर किए गए रिसीवर का इस्तेमाल करने वाले ऐप्लिकेशन और सेवाओं को एक फ़्लैग तय करना होगा. इससे यह पता चलता है कि रिसीवर को डिवाइस पर मौजूद अन्य सभी ऐप्लिकेशन में एक्सपोर्ट किया जाना चाहिए या नहीं. इसके लिए, RECEIVER_EXPORTED या RECEIVER_NOT_EXPORTED में से कोई एक विकल्प चुना जा सकता है. इस ज़रूरी शर्त से, Android 13 में इन रिसीवर के लिए उपलब्ध सुविधाओं का फ़ायदा उठाकर, ऐप्लिकेशन को सुरक्षा से जुड़ी जोखिम से बचाने में मदद मिलती है.

सिर्फ़ सिस्टम ब्रॉडकास्ट पाने वाले लोगों के लिए अपवाद

अगर आपका ऐप्लिकेशन सिर्फ़ सिस्टम ब्रॉडकास्ट के लिए, Context#registerReceiver() जैसे Context#registerReceiver तरीकों से रिसीवर रजिस्टर कर रहा है, तो उसे रिसीवर रजिस्टर करते समय कोई फ़्लैग नहीं देना चाहिए.

डाइनैमिक कोड को सुरक्षित तरीके से लोड करना

अगर आपका ऐप्लिकेशन Android 14 (एपीआई लेवल 34) या उसके बाद के वर्शन को टारगेट करता है और डाइनैमिक कोड लोडिंग (डीसीएल) का इस्तेमाल करता है, तो डाइनैमिक तौर पर लोड होने वाली सभी फ़ाइलों को रीड-ओनली के तौर पर मार्क किया जाना चाहिए. ऐसा न होने पर, सिस्टम अपवाद की जानकारी देता है. हमारा सुझाव है कि ऐप्लिकेशन इस्तेमाल करने से बचें डाइनैमिक तौर पर लोड होने वाला कोड जब मुमकिन होता है, क्योंकि ऐसा करने से किसी ऐप्लिकेशन के कोड इंजेक्शन या कोड से छेड़छाड़ करके छेड़छाड़ की गई हो.

अगर आपको डाइनैमिक तौर पर कोड लोड करना पड़ता है, तो नीचे दिए गए तरीके का इस्तेमाल करके डाइनैमिक तौर पर लोड होने वाली फ़ाइल (जैसे कि DEX, JAR या APK फ़ाइल), सिर्फ़ पढ़ने के लिए जैसे ही फ़ाइल खोली जाती है और कॉन्टेंट लिखे जाने से पहले:

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

डाइनैमिक तौर पर लोड होने वाली ऐसी फ़ाइलों को मैनेज करना जो पहले से मौजूद हैं

डाइनैमिक रूप से लोड होने वाली मौजूदा फ़ाइलों के अपवादों को बनाए जाने से रोकने के लिए, हमारा सुझाव है कि फ़ाइलों को डाइनैमिक तौर पर सेव करने से पहले, उन्हें मिटा दें और उन्हें फिर से बनाएं इसे अपने ऐप्लिकेशन में फिर से लोड करें. फ़ाइलों को फिर से बनाने पर, पिछले चरण का पालन करें लिखने के समय पर फ़ाइलों को रीड-ओनली मार्क करने के लिए दिशा-निर्देश. इसके अलावा, आपके पास ये विकल्प हैं मौजूदा फ़ाइलों को केवल पढ़ने के लिए के रूप में री-लेबल करें, लेकिन इस मामले में हम कड़ाई से हम पहले पुष्टि करें कि आप फ़ाइलों के भरोसेमंद होने की पुष्टि कर लें. उदाहरण के लिए, किसी भरोसेमंद वैल्यू के हिसाब से फ़ाइल के हस्ताक्षर की जांच करता है). इससे आपके ऐप्लिकेशन को सुरक्षित रखने में मदद मिलती है नुकसान पहुंचाने वाली कार्रवाइयों से बचाने के लिए.

बैकग्राउंड से गतिविधियां शुरू करने पर अतिरिक्त पाबंदियां

For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:

These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.

ज़िप पाथ ट्रैवर्सल

For apps targeting Android 14 (API level 34) or higher, Android prevents the Zip Path Traversal Vulnerability in the following way: ZipFile(String) and ZipInputStream.getNextEntry() throws a ZipException if zip file entry names contain ".." or start with "/".

Apps can opt-out from this validation by calling dalvik.system.ZipPathValidator.clearCallback().

For apps targeting Android 14 (API level 34) or higher, a SecurityException is thrown by MediaProjection#createVirtualDisplay in either of the following scenarios:

Your app must ask the user to give consent before each capture session. A single capture session is a single invocation on MediaProjection#createVirtualDisplay, and each MediaProjection instance must be used only once.

Handle configuration changes

If your app needs to invoke MediaProjection#createVirtualDisplay to handle configuration changes (such as the screen orientation or screen size changing), you can follow these steps to update the VirtualDisplay for the existing MediaProjection instance:

  1. Invoke VirtualDisplay#resize with the new width and height.
  2. Provide a new Surface with the new width and height to VirtualDisplay#setSurface.

Register a callback

Your app should register a callback to handle cases where the user doesn't grant consent to continue a capture session. To do this, implement Callback#onStop and have your app release any related resources (such as the VirtualDisplay and Surface).

If your app doesn't register this callback, MediaProjection#createVirtualDisplay throws an IllegalStateException when your app invokes it.

गैर-एसडीके से जुड़ी पाबंदियां अपडेट की गईं

Android 14 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 14, some of these changes might not immediately affect you. However, while you can currently use some non-SDK interfaces (depending on your app's target API level), using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you cannot find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

To learn more about the changes in this release of Android, see Updates to non-SDK interface restrictions in Android 14. To learn more about non-SDK interfaces generally, see Restrictions on non-SDK interfaces.