Modifiche al comportamento: tutte le app

La piattaforma Android 17 include modifiche al comportamento che potrebbero interessare la tua app. Le seguenti modifiche al comportamento si applicano a tutte le app quando vengono eseguite su Android 17, indipendentemente da targetSdkVersion. Devi testare la tua app e poi modificarla in base alle necessità per supportare queste modifiche, ove applicabile.

Assicurati di esaminare anche l'elenco delle modifiche al comportamento che interessano solo le app che hanno come target Android 17.

Funzionalità di base

Android 17 (livello API 37) include le seguenti modifiche che modificano o espandono varie funzionalità di base del sistema Android.

Limiti di memoria delle app

Android 17 introduces app memory limits based on the device's total RAM to create a more stable and deterministic environment for your apps and Android users. These limits focus on memory leaks and other outliers before they trigger system-wide instability resulting in UI stuttering, higher battery drain, and apps being killed. While we anticipate minimal impact on the vast majority of app sessions, we recommend the following memory best practices, including establishing a baseline for memory.

You can determine if your app session was impacted by calling getDescription in ApplicationExitInfo; if your app was affected, the exit reason will be REASON_OTHER and the description will contain the string "MemoryLimiter:AnonSwap" along with other information. You can also use trigger-based profiling with TRIGGER_TYPE_ANOMALY to get heap dumps that are collected when the memory limit is hit.

The Manage your app's memory documentation gives information to help you diagnose your app's memory issues and optimize its resource consumption.

Test your app's behavior under the memory constraints

You can use Android Debug Bridge (adb) to adjust or disable the memory limits on any device that imposes them. The shell command am provides three subcommands to adjust the memory limits. (These commands have no effect on a device which does not impose memory limits.)

  • am memory-limiter ignore <uid>|none|all
  • am memory-limiter manual <pid> <limit>|max|none
  • am memory-limiter status
ignore

Instructs the memory limiter to ignore some or all processes. Passing a UID (Android User ID) instructs the memory limiter to ignore enforcement on all processes associated with that UID. You can also pass all (ignore all apps) or none (do not ignore any apps). Passing none overrides any previous calls to am memory-limiter ignore.

If you instruct the memory limiter to ignore a UID, you can still apply a manual memory limit to a process within the app by calling am memory-limiter manual.

manual

Instructs the system to impose a memory constraint on the process with the specified PID (Process ID). The memory constraint is specified as an integer number of MB; for example, passing 30 specifies that the process is limited to 30 MB of memory. Passing max removes all memory limits on that process. Passing none removes any manual limits set on the process, restoring the system's default limit (if any).

status

Reports the current status of the memory limiter. The status includes the memory limits imposed on visible and non-visible processes.

Privacy

Android 17 include le seguenti modifiche per migliorare la privacy degli utenti.

Protezione OTP via SMS

Beginning with Android 17, Android is expanding its protection for SMS messages containing one-time passwords (OTP).

In previous versions of Android, this protection was primarily focused on the SMS Retriever format. Delivery of messages containing an SMS retriever hash was delayed for most apps for three hours. However, certain apps (like the default SMS handler) were exempt from the delay, and the app that owned the hash was also exempted.

Beginning with Android 17, the protection is also applied to WebOTP format messages. If an app has permission to read SMS messages but is not the intended recipient of a WebOTP message (as determined by domain verification), the message is not accessible to the app until three hours after the message's receipt. This change is intended to improve user security by ensuring that only apps associated with the domain mentioned in the message can programmatically read the verification code.

During this three hour delay, the SMS_RECEIVED_ACTION broadcast is withheld and SMS provider database queries are filtered. The SMS message is available to these apps after the delay. This change applies to all apps, regardless of their target API level.

Certain apps such as the default SMS assistant app, connected device companion apps, etc., are exempted from this delay. All apps that rely on reading SMS messages for OTP extraction should transition to using SMS Retriever or SMS User Consent APIs to ensure continued functionality.

Sicurezza

Android 17 include i seguenti miglioramenti alla sicurezza di app e dispositivi.

Piano di ritiro di usesClearTraffic

In a future release, we plan to deprecate the usesCleartextTraffic element. Apps that need to make unencrypted (HTTP) connections should migrate to using a network security configuration file, which lets you specify which domains your app needs to make cleartext connections to.

Be aware that network security configuration files are only supported on API levels 24 and higher. If your app has a minimum API level lower than 24, you should do both of the following:

  • Set the usesCleartextTraffic attribute to true
  • Use a network configuration file

If your app's minimum API level is 24 or higher, you can use a network configuration file and you don't need to set usesCleartextTraffic.

Limita le concessioni implicite di URI

Currently, if an app launches an intent with a URI that has the action ACTION_SEND, ACTION_SEND_MULTIPLE, or ACTION_IMAGE_CAPTURE, the system automatically grants the read and write URI permissions to the target app. Starting in Android 18, the system will no longer automatically grant these permissions. For this reason, we recommend that apps explicitly grant the relevant URI permissions instead of relying on the system to grant them.

To detect the usage of these intents in your app, use StrictMode with detectImplicitUriPermissionGrant() to trigger a violation:

Kotlin

val policy = StrictMode.VmPolicy.Builder()
    .detectImplicitUriPermissionGrant()
    .penaltyLog()
    .build()
StrictMode.setVmPolicy(policy)

Java

StrictMode.VmPolicy policy = new StrictMode.VmPolicy.Builder()
    .detectImplicitUriPermissionGrant()
    .penaltyLog()
    .build();
StrictMode.setVmPolicy(policy);

Alternatively, you can monitor for logged exceptions containing the message Please set the grant explicitly in the app that appears when system implicitly sets the grant. You can monitor for these logs using the following adb command:

adb logcat | grep "Please set the grant explicitly in the app"

To explicitly grant the necessary permissions, add the FLAG_GRANT_READ_URI_PERMISSION flag to ACTION_SEND and ACTION_SEND_MULTIPLE intents:

Kotlin

intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION)

Java

intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION);

Include both FLAG_GRANT_READ_URI_PERMISSION and FLAG_GRANT_WRITE_URI_PERMISSION flags for ACTION_IMAGE_CAPTURE intents:

Kotlin

intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION or Intent.FLAG_GRANT_WRITE_URI_PERMISSION)

Java

intent.addFlags(Intent.FLAG_GRANT_READ_URI_PERMISSION | Intent.FLAG_GRANT_WRITE_URI_PERMISSION);

Limiti del keystore per app

Le app devono evitare di creare un numero eccessivo di chiavi in Android Keystore, perché è una risorsa condivisa per tutte le app sul dispositivo. A partire da Android 17, il sistema impone un limite al numero di chiavi che un'app può possedere. Il limite è di 50.000 chiavi per le app non di sistema che hanno come target Android 17 (livello API 37) o versioni successive e di 200.000 chiavi per tutte le altre app. Le app di sistema hanno un limite di 200.000 chiavi, indipendentemente dal livello API a cui fanno riferimento.

Se un'app tenta di creare chiavi oltre il limite, la creazione non riesce e viene restituito un KeyStoreException. La stringa del messaggio dell'eccezione contiene informazioni sul limite di chiavi. Se l'app chiama getNumericErrorCode() sull'eccezione, il valore restituito dipende dal livello API a cui è destinata l'app:

  • App che hanno come target Android 17 (livello API 37) o versioni successive: getNumericErrorCode() restituisce il nuovo valore ERROR_TOO_MANY_KEYS.
  • Tutte le altre app: getNumericErrorCode() restituisce ERROR_INCORRECT_USAGE.

Blocca il traffico di loopback tra profili

A partire da Android 17, il traffico di loopback tra profili non è più consentito per impostazione predefinita. Il traffico di loopback all'interno dello stesso profilo non è interessato. Questa modifica si applica a tutte le app in esecuzione su Android 17 o versioni successive, indipendentemente dal livello API di destinazione dell'app.

Esperienza utente e UI di sistema

Android 17 include le seguenti modifiche volte a creare un'esperienza utente più coerente e intuitiva.

Ripristino della visibilità dell'IME predefinito dopo la rotazione

A partire da Android 17, quando la configurazione del dispositivo cambia (ad esempio tramite la rotazione) e questo non viene gestito dall'app stessa, la visibilità della tastiera virtuale precedente non viene ripristinata.

Se la tua app subisce una modifica della configurazione che non gestisce e ha bisogno che la tastiera sia visibile dopo la modifica, devi richiederlo esplicitamente. Puoi effettuare questa richiesta in uno dei seguenti modi:

  • Imposta l'attributo android:windowSoftInputMode su stateAlwaysVisible.
  • Richiedi la tastiera su schermo a livello di programmazione nel metodo onCreate() dell'attività o aggiungi il metodo onConfigurationChanged().

Azione umana

Android 17 include le seguenti modifiche che influiscono sul modo in cui le app interagiscono con i dispositivi di input umani come tastiere e touchpad.

I touchpad forniscono eventi relativi per impostazione predefinita durante l'acquisizione del puntatore

Beginning with Android 17, if an app requests pointer capture using View.requestPointerCapture() and the user uses a touchpad, the system recognizes pointer movement and scrolling gestures from the user's touches and reports them to the app in the same way as pointer and scroll wheel movements from a captured mouse. In most cases, this removes the need for apps that support captured mice to add special handling logic for touchpads. For more details, see the documentation for View.POINTER_CAPTURE_MODE_RELATIVE.

Previously, the system did not attempt to recognize gestures from the touchpad, and instead delivered the raw, absolute finger locations to the app in a similar format to touchscreen touches. If an app still requires this absolute data, it should call the new View.requestPointerCapture(int) method with View.POINTER_CAPTURE_MODE_ABSOLUTE instead.

Media

Android 17 include le seguenti modifiche al comportamento dei contenuti multimediali.

Protezione dell'audio in background

A partire da Android 17, il framework audio applica restrizioni alle interazioni audio in background, tra cui la riproduzione audio, le richieste di focus audio e le API di modifica del volume, per garantire che queste modifiche vengano avviate intenzionalmente dall'utente.

Se l'app tenta di chiamare le API audio mentre non si trova in un ciclo di vita valido, le API di riproduzione audio e di modifica del volume non riescono in modo silenzioso senza generare un'eccezione o fornire un messaggio di errore. L'API di focus audio non riesce con il codice risultato AUDIOFOCUS_REQUEST_FAILED.

Per ulteriori informazioni, incluse le strategie di mitigazione, consulta Protezione dell'audio in background .

Connettività

Android 17 include le seguenti modifiche per migliorare la connettività dei dispositivi.

Riassociazione autonoma in caso di perdita dell'associazione Bluetooth

Android 17 introduce l'accoppiamento automatico, un miglioramento a livello di sistema progettato per risolvere automaticamente la perdita dell'associazione Bluetooth.

In precedenza, se un'associazione veniva persa, gli utenti dovevano andare manualmente in Impostazioni per annullare l'accoppiamento e poi accoppiare di nuovo la periferica. Questa funzionalità si basa sul miglioramento della sicurezza di Android 16, consentendo al sistema di ristabilire le associazioni in background senza che gli utenti debbano andare manualmente in Impostazioni per annullare l'accoppiamento e accoppiare di nuovo le periferiche.

Sebbene la maggior parte delle app non richieda modifiche al codice, gli sviluppatori devono essere a conoscenza delle seguenti modifiche al comportamento dello stack Bluetooth:

  • Nuovo contesto di accoppiamento: ACTION_PAIRING_REQUEST ora include l'extra EXTRA_PAIRING_CONTEXT, che consente alle app di distinguere tra una richiesta di accoppiamento standard e un tentativo di accoppiamento automatico avviato dal sistema.
  • Aggiornamenti delle chiavi condizionali: le chiavi di sicurezza esistenti verranno sostituite solo se l'accoppiamento automatico va a buon fine e la nuova connessione soddisfa o supera il livello di sicurezza dell'associazione precedente.
  • Tempistica degli intent modificata: l'intent ACTION_KEY_MISSING viene ora trasmesso solo se il tentativo di accoppiamento automatico non va a buon fine. In questo modo si riduce la gestione degli errori non necessaria nell'app se il sistema recupera correttamente l'associazione in background.
  • Notifica utente: il sistema gestisce l'accoppiamento automatico tramite nuove notifiche e finestre di dialogo dell'interfaccia utente. Agli utenti verrà chiesto di confermare il tentativo di accoppiamento automatico per assicurarsi che siano a conoscenza della riconnessione.

I produttori di dispositivi periferici e gli sviluppatori di app complementari devono verificare che l'hardware e l'app gestiscano correttamente le transizioni di associazione. Per testare questo comportamento, simula una perdita di associazione remota utilizzando uno dei seguenti metodi:

  • Rimuovi manualmente le informazioni sull'associazione dal dispositivo periferico
  • Annulla manualmente l'accoppiamento del dispositivo in: Impostazioni > Dispositivi collegati