Panoramica delle funzionalità e delle API

Android 15 introduce fantastiche funzionalità e API per gli sviluppatori. Le sezioni seguenti riepilogano queste funzionalità per aiutarti a iniziare a utilizzare le API correlate.

Per un elenco dettagliato delle API aggiunte, modificate e rimosse, leggi il report diff API. Per informazioni dettagliate sulle API aggiunte, visita il riferimento API Android. Per Android 15, cerca le API aggiunte nel livello API 35. Per scoprire le aree in cui le modifiche alla piattaforma potrebbero influire sulle tue app, consulta le modifiche al comportamento di Android 15 per le app che hanno come target Android 15 e per tutte le app.

Fotocamera e contenuti multimediali

Android 15 include una serie di funzionalità che migliorano l'esperienza con la fotocamera e i contenuti multimediali e che ti danno accesso a strumenti e hardware per aiutare i creator a dare vita alla loro visione su Android.

Per saperne di più sulle funzionalità e sulle soluzioni per sviluppatori più recenti per i contenuti multimediali e la fotocamera di Android, guarda il talk Building modern Android media and camera experiences di Google I/O.

Aumento luce

Android 15 introduces Low Light Boost, an auto-exposure mode available to both Camera 2 and the night mode camera extension. Low Light Boost adjusts the exposure of the Preview stream in low-light conditions. This is different from how the night mode camera extension creates still images, because night mode combines a burst of photos to create a single, enhanced image. While night mode works very well for creating a still image, it can't create a continuous stream of frames, but Low Light Boost can. Thus, Low Light Boost enables camera capabilities, such as:

  • Providing an enhanced image preview, so users are better able to frame their low-light pictures
  • Scanning QR codes in low light

If you enable Low Light Boost, it automatically turns on when there's a low light level, and turns off when there's more light.

Apps can record off the Preview stream in low-light conditions to save a brightened video.

For more information, see Low Light Boost.

Controlli della videocamera in-app

Android 15 adds an extension for more control over the camera hardware and its algorithms on supported devices:

  • Advanced flash strength adjustments enabling precise control of flash intensity in both SINGLE and TORCH modes while capturing images.

Controllo dell'headroom HDR

Android 15 chooses HDR headroom that is appropriate for the underlying device capabilities and bit-depth of the panel. For pages that have lots of SDR content, such as a messaging app displaying a single HDR thumbnail, this behavior can end up adversely influencing the perceived brightness of the SDR content. Android 15 lets you control the HDR headroom with setDesiredHdrHeadroom to strike a balance between SDR and HDR content.

The brightness of SDR UI elements on the left screen appears to be more uniform than the brightness on the right screen, which simulates possible headroom issues when HDR and SDR content are mixed. By adjusting the HDR headroom, you can achieve a better balance between the SDR and HDR content.

Controllo del loudness

Android 15 introduces support for the CTA-2075 loudness standard to help you avoid audio loudness inconsistencies and ensure users don't have to constantly adjust volume when switching between content. The system leverages known characteristics of the output devices (headphones and speaker) along with loudness metadata available in AAC audio content to intelligently adjust the audio loudness and dynamic range compression levels.

To enable this feature, you need to ensure loudness metadata is available in your AAC content and enable the platform feature in your app. For this, you instantiate a LoudnessCodecController object by calling its create factory method with the audio session ID from the associated AudioTrack; this automatically starts applying audio updates. You can pass an OnLoudnessCodecUpdateListener to modify or filter loudness parameters before they are applied on the MediaCodec.

// Media contains metadata of type MPEG_4 OR MPEG_D
val mediaCodec = 
val audioTrack = AudioTrack.Builder()
                                .setSessionId(sessionId)
                                .build()
...
// Create new loudness controller that applies the parameters to the MediaCodec
try {
   val lcController = LoudnessCodecController.create(mSessionId)
   // Starts applying audio updates for each added MediaCodec
}

AndroidX media3 ExoPlayer will also be updated to use the LoudnessCodecController APIs for a seamless app integration.

Dispositivi MIDI virtuali 2.0

Android 13 added support for connecting to MIDI 2.0 devices using USB, which communicate using Universal MIDI Packets (UMP). Android 15 extends UMP support to virtual MIDI apps, enabling composition apps to control synthesizer apps as a virtual MIDI 2.0 device just like they would with an USB MIDI 2.0 device.

Decodifica software AV1 più efficiente

Logo dav1d

dav1d, il popolare decodificatore software AV1 di VideoLAN, è disponibile per i dispositivi Android che non supportano la decodifica AV1 in hardware. dav1d è fino a 3 volte più performante del precedente decodificatore software AV1, il che consente la riproduzione di AV1 HD a un maggior numero di utenti, inclusi alcuni dispositivi di fascia bassa e media.

La tua app deve attivare l'utilizzo di dav1d invocandolo per nome"c2.android.av1-dav1d.decoder". In un aggiornamento successivo, dav1d diventerà il decodificatore software AV1 predefinito. Questo supporto è standardizzato e sottoposto a backporting sui dispositivi Android 11 che ricevono gli aggiornamenti di sistema di Google Play.

Produttività e strumenti per gli sviluppatori

La maggior parte del nostro lavoro per migliorare la tua produttività si concentra su strumenti come Android Studio, Jetpack Compose e le librerie Android Jetpack, ma cerchiamo sempre modi nella piattaforma per aiutarti a realizzare più facilmente la tua visione.

Aggiornamenti di OpenJDK 17

Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.

The following key features and improvements are included:

These APIs are updated on over a billion devices running Android 12 (API level 31) and higher through Google Play System updates, so you can target the latest programming features.

Miglioramenti al PDF

Android 15 includes substantial improvements to the PdfRenderer APIs. Apps can incorporate advanced features such as rendering password-protected files, annotations, form editing, searching, and selection with copy. Linearized PDF optimizations are supported to speed local PDF viewing and reduce resource use. The Jetpack PDF library uses these APIs to simplify adding PDF viewing capabilities to your app.

The latest updates to PDF rendering include features such as searching an embedded PDF file.

The PdfRenderer has been moved to a module that can be updated using Google Play system updates independent of the platform release, and we're supporting these changes back to Android 11 (API level 30) by creating a compatible pre-Android 15 version of the API surface, called PdfRendererPreV.

Perfezionamenti del cambio di lingua automatico

Android 14 added on-device, multi-language recognition in audio with automatic switching between languages, but this can cause words to get dropped, especially when languages switch with less of a pause between the two utterances. Android 15 adds additional controls to help apps tune this switching to their use case. EXTRA_LANGUAGE_SWITCH_INITIAL_ACTIVE_DURATION_TIME_MILLIS confines the automatic switching to the beginning of the audio session, while EXTRA_LANGUAGE_SWITCH_MATCH_SWITCHES deactivates the language switching after a defined number of switches. These options are particularly useful if you expect that there will be a single language spoken during the session that should be autodetected.

API per caratteri variabili OpenType migliorata

Android 15 improves the usability of the OpenType variable font. You can create a FontFamily instance from a variable font without specifying weight axes with the buildVariableFamily API. The text renderer overrides the value of wght axis to match the displaying text.

Using the API simplifies the code for creating a Typeface considerably:

Kotlin

val newTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build()

Java

Typeface newTypeface = Typeface.CustomFallbackBuilder(
            new FontFamily.Builder(
                new Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build();

Previously, to create the same Typeface, you would need much more code:

Kotlin

val oldTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf")
                    .setFontVariationSettings("'wght' 400")
                    .setWeight(400)
                    .build())
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 100")
                        .setWeight(100)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 200")
                        .setWeight(200)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 300")
                        .setWeight(300)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 500")
                        .setWeight(500)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 600")
                        .setWeight(600)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 700")
                        .setWeight(700)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 800")
                        .setWeight(800)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 900")
                        .setWeight(900)
                        .build()
                ).build()
        ).build()

Java

Typeface oldTypeface = new Typeface.CustomFallbackBuilder(
    new FontFamily.Builder(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 400")
            .setWeight(400)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 100")
            .setWeight(100)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 200")
            .setWeight(200)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 300")
            .setWeight(300)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 500")
            .setWeight(500)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 600")
            .setWeight(600)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 700")
            .setWeight(700)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 800")
            .setWeight(800)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 900")
            .setWeight(900)
            .build()
    )
    .build()
).build();

Here's an example of how a Typeface created with both the old and new APIs renders:

An example of how Typeface rendering differs using new and old
APIs

In this example, the Typeface created with the old API doesn't have the capability to create accurate font weights for the 350, 450, 550 and 650 Font instances, so the renderer falls back to the closest weight. So in this case, 300 is rendered instead of 350, 400 is rendered instead of 450, and so on. By contrast, the Typeface created with the new APIs dynamically creates a Font instance for a given weight, so accurate weights are rendered for 350, 450, 550, and 650 as well.

Controlli granulari delle interruzioni di riga

A partire da Android 15, un TextView e l'interruzione di riga sottostante possono conservare la parte di testo specificata nella stessa riga per migliorare la leggibilità. Puoi sfruttare questa personalizzazione dell'interruzione di riga utilizzando il tag <nobreak> nelle risorse stringa o createNoBreakSpan. Analogamente, puoi impedire la suddivisione delle parole in sillabe utilizzando il tag <nohyphen> o createNoHyphenationSpan.

Ad esempio, la seguente risorsa stringa non include un a capo e viene visualizzata con il testo "Pixel 8 Pro" interrotto in un punto indesiderato:

<resources>
    <string name="pixel8pro">The power and brains behind Pixel 8 Pro.</string>
</resources>

Al contrario, questa risorsa stringa include il tag <nobreak>, che inserisce un a capo nella frase "Pixel 8 Pro" e impedisce gli a capo:

<resources>
    <string name="pixel8pro">The power and brains behind <nobreak>Pixel 8 Pro.</nobreak></string>
</resources>

La differenza nel modo in cui queste stringhe vengono visualizzate è mostrata nelle seguenti immagini:

Layout di una riga di testo in cui la frase "Pixel 8 Pro" non è a capo utilizzando un tag <nobreak>.
Layout per la stessa riga di testo in cui la frase "Pixel 8 Pro" è a capo utilizzando un tag <nobreak>.

Archiviazione delle app

Android and Google Play announced support for app archiving last year, allowing users to free up space by partially removing infrequently used apps from the device that were published using Android App Bundle on Google Play. Android 15 includes OS level support for app archiving and unarchiving, making it easier for all app stores to implement it.

Apps with the REQUEST_DELETE_PACKAGES permission can call the PackageInstaller requestArchive method to request archiving an installed app package, which removes the APK and any cached files, but persists user data. Archived apps are returned as displayable apps through the LauncherApps APIs; users will see a UI treatment to highlight that those apps are archived. If a user taps on an archived app, the responsible installer will get a request to unarchive it, and the restoration process can be monitored by the ACTION_PACKAGE_ADDED broadcast.

Attivare la modalità a 16 kB su un dispositivo utilizzando le opzioni sviluppatore

Attiva l'opzione sviluppatore Avvia con dimensione pagina 16 kB per avviare un dispositivo in modalità a 16 kB.

A partire da Android 15 QPR1, puoi utilizzare l'opzione sviluppatore disponibile su alcuni dispositivi per avviare il dispositivo in modalità 16 KB ed eseguire test sul dispositivo. Prima di utilizzare l'opzione sviluppatore, vai a Impostazioni > Sistema > Aggiornamenti software e applica gli aggiornamenti disponibili.

Questa opzione sviluppatore è disponibile sui seguenti dispositivi:

  • Pixel 8 e 8 Pro (con Android 15 QPR1 o versioni successive)

  • Pixel 8a (con Android 15 QPR1 o versioni successive)

  • Pixel 9, 9 Pro e 9 Pro XL (con Android 15 QPR2 Beta 2 o versioni successive)

Grafica

Android 15 offre i più recenti miglioramenti grafici, tra cui ANGLE e aggiunte al sistema grafico Canvas.

Modernizzazione dell'accesso alla GPU di Android

Vulkan logo

Android hardware has evolved quite a bit from the early days where the core OS would run on a single CPU and GPUs were accessed using APIs based on fixed-function pipelines. The Vulkan® graphics API has been available in the NDK since Android 7.0 (API level 24) with a lower-level abstraction that better reflects modern GPU hardware, scales better to support multiple CPU cores, and offers reduced CPU driver overhead — leading to improved app performance. Vulkan is supported by all modern game engines.

Vulkan is Android's preferred interface to the GPU. Therefore, Android 15 includes ANGLE as an optional layer for running OpenGL® ES on top of Vulkan. Moving to ANGLE will standardize the Android OpenGL implementation for improved compatibility, and, in some cases, improved performance. You can test out your OpenGL ES app stability and performance with ANGLE by enabling the developer option in Settings -> System -> Developer Options -> Experimental: Enable ANGLE on Android 15.

The Android ANGLE on Vulkan roadmap

Roadmap of upcoming changes to the Android GPU APIs.

As part of streamlining our GPU stack, going forward we will be shipping ANGLE as the GL system driver on more new devices, with the future expectation that OpenGL/ES will be only available through ANGLE. That being said, we plan to continue support for OpenGL ES on all devices.

Recommended next steps

Use the developer options to select the ANGLE driver for OpenGL ES and test your app. For new projects, we strongly encourage using Vulkan for C/C++.

Miglioramenti per Canvas

Android 15 continua la nostra modernizzazione del sistema grafico Canvas di Android con funzionalità aggiuntive:

  • Matrix44 fornisce una matrice 4x4 per la trasformazione delle coordinate da utilizzare quando vuoi manipolare la tela in 3D.
  • clipShader interseca il clip corrente con lo shader specificato, mentre clipOutShader imposta il clip sulla differenza tra il clip corrente e lo shader, trattando ciascuno lo shader come una maschera alfa. Ciò consente di disegnare in modo efficiente forme complesse.

Prestazioni e batteria

Android continua a concentrarsi sull'aiutarti a migliorare il rendimento e la qualità delle tue app. Android 15 introduce API che contribuiscono a rendere più efficienti le attività nella tua app, a ottimizzare le prestazioni dell'app e a raccogliere approfondimenti sulle tue app.

Per le best practice per l'efficienza della batteria, il debug dell'utilizzo di rete ed energia e dettagli su come stiamo migliorando l'efficienza della batteria del lavoro in background in Android 15 e nelle versioni recenti di Android, guarda il talk Migliorare l'efficienza della batteria del lavoro in background su Android di Google I/O.

API ApplicationStartInfo

In previous versions of Android, app startup has been a bit of a mystery. It was challenging to determine within your app whether it started from a cold, warm, or hot state. It was also difficult to know how long your app spent during the various launch phases: forking the process, calling onCreate, drawing the first frame, and more. When your Application class was instantiated, you had no way of knowing whether the app started from a broadcast, a content provider, a job, a backup, boot complete, an alarm, or an Activity.

The ApplicationStartInfo API on Android 15 provides all of this and more. You can even choose to add your own timestamps into the flow to help collect timing data in one place. In addition to collecting metrics, you can use ApplicationStartInfo to help directly optimize app startup; for example, you can eliminate the costly instantiation of UI-related libraries within your Application class when your app is starting up due to a broadcast.

Informazioni dettagliate sulle dimensioni dell'app

Since Android 8.0 (API level 26), Android has included the StorageStats.getAppBytes API that summarizes the installed size of an app as a single number of bytes, which is a sum of the APK size, the size of files extracted from the APK, and files that were generated on the device such as ahead-of-time (AOT) compiled code. This number is not very insightful in terms of how your app is using storage.

Android 15 adds the StorageStats.getAppBytesByDataType([type]) API, which lets you get insight into how your app is using up all that space, including APK file splits, AOT and speedup related code, dex metadata, libraries, and guided profiles.

Profilazione gestita dalle app

Android 15 includes the ProfilingManager class, which lets you collect profiling information from within your app such as heap dumps, heap profiles, stack sampling, and more. It provides a callback to your app with a supplied tag to identify the output file, which is delivered to your app's files directory. The API does rate limiting to minimize the performance impact.

To simplify constructing profiling requests in your app, we recommend using the corresponding Profiling AndroidX API, available in Core 1.15.0-rc01 or higher.

Miglioramenti al database SQLite

Android 15 introduces SQLite APIs that expose advanced features from the underlying SQLite engine that target specific performance issues that can manifest in apps. These APIs are included with the update of SQLite to version 3.44.3.

Developers should consult best practices for SQLite performance to get the most out of their SQLite database, especially when working with large databases or when running latency-sensitive queries.

  • Read-only deferred transactions: when issuing transactions that are read-only (don't include write statements), use beginTransactionReadOnly() and beginTransactionWithListenerReadOnly(SQLiteTransactionListener) to issue read-only DEFERRED transactions. Such transactions can run concurrently with each other, and if the database is in WAL mode, they can run concurrently with IMMEDIATE or EXCLUSIVE transactions.
  • Row counts and IDs: APIs were added to retrieve the count of changed rows or the last inserted row ID without issuing an additional query. getLastChangedRowCount() returns the number of rows that were inserted, updated, or deleted by the most recent SQL statement within the current transaction, while getTotalChangedRowCount() returns the count on the current connection. getLastInsertRowId() returns the rowid of the last row to be inserted on the current connection.
  • Raw statements: issue a raw SQlite statement, bypassing convenience wrappers and any additional processing overhead that they may incur.

Aggiornamenti di Android Dynamic Performance Framework

Android 15 continua il nostro investimento nell'Android Dynamic Performance Framework (ADPF), un insieme di API che consente a giochi e app ad alte prestazioni di interagire più direttamente con i sistemi di alimentazione e termici dei dispositivi Android. Sui dispositivi supportati, Android 15 aggiunge le funzionalità ADPF:

  • Una modalità di risparmio energetico per le sessioni di suggerimenti per indicare che i thread associati devono dare la priorità al risparmio energetico rispetto alle prestazioni, ideale per i carichi di lavoro in background di lunga durata.
  • Le durate del lavoro della GPU e della CPU possono essere entrambe registrate nelle sessioni di suggerimenti, consentendo al sistema di regolare le frequenze della CPU e della GPU insieme per soddisfare al meglio le richieste del carico di lavoro.
  • Soglie di headroom termico per interpretare il possibile stato di throttling termico in base alla previsione dell'headroom.

Per scoprire di più su come utilizzare ADPF nelle tue app e nei tuoi giochi, consulta la documentazione.

Privacy

Android 15 include una serie di funzionalità che aiutano gli sviluppatori di app a proteggere la privacy degli utenti.

Rilevamento della registrazione dello schermo

Android 15 aggiunge il supporto delle app per rilevare che vengono registrate. Un callback viene invocato ogni volta che l'app passa da visibile a invisibile all'interno di una registrazione dello schermo. Un'app è considerata visibile se vengono registrate attività di proprietà dell'UID della procedura di registrazione. In questo modo, se la tua app esegue un'operazione sensibile, puoi informare l'utente che è in corso una registrazione.

val mCallback = Consumer<Int> { state ->
  if (state == SCREEN_RECORDING_STATE_VISIBLE) {
    // We're being recorded
  } else {
    // We're not being recorded
  }
}

override fun onStart() {
   super.onStart()
   val initialState =
      windowManager.addScreenRecordingCallback(mainExecutor, mCallback)
   mCallback.accept(initialState)
}

override fun onStop() {
    super.onStop()
    windowManager.removeScreenRecordingCallback(mCallback)
}

Funzionalità IntentFilter ampliate

Android 15 supporta la risoluzione Intent più precisa tramite UriRelativeFilterGroup, che contiene un insieme di UriRelativeFilter oggetti che formano un insieme di Intent regole di corrispondenza che devono essere soddisfatte, inclusi i parametri di query dell'URL, i frammenti di URL e le regole di blocco o esclusione.

Queste regole possono essere definite nel file XML AndroidManifest con il tag <uri-relative-filter-group>, che può includere facoltativamente un tag android:allow. Questi tag possono contenere tag <data> che utilizzano attributi di tag dati esistenti, nonché gli attributi android:query e android:fragment.

Ecco un esempio di sintassi di AndroidManifest:

<intent-filter android:autoVerify="true">
  <action android:name="android.intent.action.VIEW" />
  <category android:name="android.intent.category.BROWSABLE" />
  <category android:name="android.intent.category.DEFAULT" />
  <data android:scheme="http" />
  <data android:scheme="https" />
  <data android:host="astore.com" />
  <uri-relative-filter-group>
    <data android:pathPrefix="/auth" />
    <data android:query="region=na" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:query="mobileoptout=true" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:fragmentPrefix="faq" />
  </uri-relative-filter-group>
</intent-filter>

Spazio privato

The private space can be unlocked and locked to show or hide sensitive apps on a device.

Private space lets users create a separate space on their device where they can keep sensitive apps away from prying eyes, under an additional layer of authentication. The private space uses a separate user profile. The user can choose to use the device lock or a separate lock factor for the private space.

Apps in the private space show up in a separate container in the launcher, and are hidden from the recents view, notifications, settings, and from other apps when the private space is locked. User-generated and downloaded content (such as media or files) and accounts are separated between the private space and the main space. The system sharesheet and the photo picker can be used to give apps access to content across spaces when the private space is unlocked.

Users can't move existing apps and their data into the private space. Instead, users select an install option in the private space to install an app using whichever app store they prefer. Apps in the private space are installed as separate copies from any apps in the main space (new copies of the same app).

When a user locks the private space, the profile is stopped. While the profile is stopped, apps in the private space are no longer active and can't perform foreground or background activities, including showing notifications.

We recommend that you test your app with private space to make sure your app works as expected, especially if your app falls into one of the following categories:

Eseguire query sulla selezione più recente dell'utente per l'accesso alle foto selezionate

Apps can now highlight only the most-recently-selected photos and videos when partial access to media permissions is granted. This feature can improve the user experience for apps that frequently request access to photos and videos. To use this feature in your app, enable the QUERY_ARG_LATEST_SELECTION_ONLY argument when querying MediaStore through ContentResolver.

Kotlin

val externalContentUri = MediaStore.Files.getContentUri("external")

val mediaColumns = arrayOf(
   FileColumns._ID,
   FileColumns.DISPLAY_NAME,
   FileColumns.MIME_TYPE,
)

val queryArgs = bundleOf(
   // Return only items from the last selection (selected photos access)
   QUERY_ARG_LATEST_SELECTION_ONLY to true,
   // Sort returned items chronologically based on when they were added to the device's storage
   QUERY_ARG_SQL_SORT_ORDER to "${FileColumns.DATE_ADDED} DESC",
   QUERY_ARG_SQL_SELECTION to "${FileColumns.MEDIA_TYPE} = ? OR ${FileColumns.MEDIA_TYPE} = ?",
   QUERY_ARG_SQL_SELECTION_ARGS to arrayOf(
       FileColumns.MEDIA_TYPE_IMAGE.toString(),
       FileColumns.MEDIA_TYPE_VIDEO.toString()
   )
)

Java

Uri externalContentUri = MediaStore.Files.getContentUri("external");

String[] mediaColumns = {
    FileColumns._ID,
    FileColumns.DISPLAY_NAME,
    FileColumns.MIME_TYPE
};

Bundle queryArgs = new Bundle();
queryArgs.putBoolean(MediaStore.QUERY_ARG_LATEST_SELECTION_ONLY, true);
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SORT_ORDER, FileColumns.DATE_ADDED + " DESC");
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SELECTION, FileColumns.MEDIA_TYPE + " = ? OR " + FileColumns.MEDIA_TYPE + " = ?");
queryArgs.putStringArray(MediaStore.QUERY_ARG_SQL_SELECTION_ARGS, new String[] {
    String.valueOf(FileColumns.MEDIA_TYPE_IMAGE),
    String.valueOf(FileColumns.MEDIA_TYPE_VIDEO)
});

Privacy Sandbox su Android

Android 15 includes the latest Android Ad Services extensions, incorporating the latest version of the Privacy Sandbox on Android. This addition is part of our work to develop technologies that improve user privacy and enable effective, personalized advertising experiences for mobile apps. Our privacy sandbox page has more information about the Privacy Sandbox on Android developer preview and beta programs to help you get started.

Connessione Salute

Android 15 integra le ultime estensioni Connessione Salute di Android, un servizio sicuro e centralizzato per gestire e condividere i dati relativi a salute e fitness raccolti da app. Questo aggiornamento aggiunge il supporto per tipi di dati aggiuntivi in fitness, alimentazione, temperatura cutanea, piani di allenamento e altro ancora.

Il monitoraggio della temperatura cutanea consente agli utenti di memorizzare e condividere dati sulla temperatura più precisi da un dispositivo indossabile o da un altro dispositivo di monitoraggio.

I piani di allenamento sono programmi di allenamento strutturati per aiutare un utente a raggiungere i suoi obiettivi di fitness. Il supporto dei piani di allenamento include una serie di obiettivi di completamento e rendimento:

Scopri di più sugli ultimi aggiornamenti di Connessione Salute su Android nel Creare esperienze adattabili con Android Discussione sulla salute di Google I/O.

Condivisione della schermata dell'app

Android 15 supporta la condivisione dello schermo delle app, quindi gli utenti possono condividere o registrare solo una finestra dell'app anziché l'intero schermo del dispositivo. Questa funzionalità, attivata per la prima volta in Android 14 QPR2, include callback di MediaProjection che consentono alla tua app di personalizzare l'esperienza di condivisione schermo dell'app. Tieni presente che per le app che hanno come target Android 14 (livello API 34) o versioni successive, il consenso dell'utente è obbligatorio per ogni sessione di acquisizione MediaProjection.

Esperienza utente e UI di sistema

Android 15 offre agli sviluppatori di app e agli utenti maggiore controllo e flessibilità per configurare il dispositivo in base alle proprie esigenze.

Per scoprire di più su come utilizzare i miglioramenti più recenti di Android 15 per migliorare l'esperienza utente della tua app, guarda la presentazione Migliorare l'esperienza utente della tua app Android di Google I/O.

Anteprime dei widget più ricche con l'API Generated Previews

Prima di Android 15, l'unico modo per fornire anteprime del selettore widget era specificare una risorsa immagine o layout statica. Queste anteprime spesso sono diverse molto dall'aspetto del widget reale quando è posizionato sulla home page schermo. Inoltre, non è possibile creare risorse statiche con Jetpack Glance, quindi Riepilogo uno sviluppatore ha dovuto fare uno screenshot del widget o creare un layout XML l'anteprima del widget.

Android 15 aggiunge il supporto per le anteprime generate. Ciò significa che il widget dell'app i provider possono generare RemoteViews da usare come anteprima del selettore, di una risorsa statica.

Le app possono fornire visualizzazioni remote al selettore di widget, in modo da poter aggiornare i contenuti nel selettore in modo che siano più rappresentativi di ciò che vedrà l'utente.

API Push

Le app possono fornire anteprime generate tramite un'API push. Le app possono fornire anteprime in qualsiasi momento del loro ciclo di vita e non ricevono una richiesta esplicita dall'host per fornire anteprime. Le anteprime vengono conservate in AppWidgetService e gli autori possono richiederle on demand. L'esempio seguente carica una risorsa di layout del widget XML e la imposta come anteprima:

AppWidgetManager.getInstance(appContext).setWidgetPreview(
   ComponentName(
       appContext,
       SociaLiteAppWidgetReceiver::class.java
   ),
   AppWidgetProviderInfo.WIDGET_CATEGORY_HOME_SCREEN,
   RemoteViews("com.example", R.layout.widget_preview)
)

Il flusso previsto è:

  1. In qualsiasi momento, il fornitore del widget chiama setWidgetPreview. Le anteprime fornite vengono conservate in AppWidgetService insieme ad altre informazioni del fornitore.
  2. setWidgetPreview invia una notifica agli host di un'anteprima aggiornata tramite il callback AppWidgetHost.onProvidersChanged. In risposta, l'host del widget ricarica tutte le informazioni del fornitore.
  3. Quando viene visualizzata un'anteprima del widget, l'host controlla AppWidgetProviderInfo.generatedPreviewCategories e, se la categoria scelta è disponibile, chiama AppWidgetManager.getWidgetPreview per restituire l'anteprima salvata per questo fornitore.

Quando chiamare setWidgetPreview

Poiché non è necessario richiamare le anteprime, le app possono scegliere di inviare vengono visualizzate in qualsiasi momento quando sono in esecuzione. La frequenza con cui aggiornare l'anteprima dipende dal caso d'uso del widget.

L'elenco seguente descrive le due categorie principali di casi d'uso di anteprima:

  • Fornitori che mostrano dati reali nelle anteprime dei widget, ad esempio informazioni personalizzate o recenti. Questi fornitori possono impostare l'anteprima dopo che l'utente ha eseguito l'accesso o ha completato la configurazione iniziale nella propria app. Dopodiché, possono configurare un'attività periodica per aggiornare le anteprime con la cadenza scelta. Esempi di questo tipo di widget possono essere foto, calendario, meteo o notizie.
  • Fornitori che mostrano informazioni statiche nelle anteprime o nei widget di azioni rapide che non mostrano dati. Questi fornitori possono impostare le anteprime una sola volta, quando viene avviata per la prima volta. Alcuni esempi di questo tipo di widget includono una guida rapida widget azioni o widget scorciatoie di Chrome.

Alcuni fornitori potrebbero mostrare anteprime statiche nel selettore della modalità Hub, ma informazioni reali nel selettore della schermata Home. Questi fornitori devono seguire le indicazioni per entrambi i casi d'uso per impostare le anteprime.

Picture in picture

Android 15 introduces changes in Picture-in-Picture (PiP) ensuring an even smoother transition when entering into PiP mode. This will be beneficial for apps having UI elements overlaid on top of their main UI, which goes into PiP.

Developers use the onPictureInPictureModeChanged callback to define logic that toggles the visibility of the overlaid UI elements. This callback is triggered when the PiP enter or exit animation is completed. Beginning in Android 15, the PictureInPictureUiState class includes another state.

With this UI state, apps targeting Android 15 (API level 35) will observe the Activity#onPictureInPictureUiStateChanged callback being invoked with isTransitioningToPip() as soon as the PiP animation starts. There are many UI elements that are not relevant for the app when it is in PiP mode, for example views or layout that include information such as suggestions, upcoming video, ratings, and titles. When the app goes to PiP mode, use the onPictureInPictureUiStateChanged callback to hide these UI elements. When the app goes to full screen mode from the PiP window, use onPictureInPictureModeChanged callback to unhide these elements, as shown in the following examples:

override fun onPictureInPictureUiStateChanged(pipState: PictureInPictureUiState) {
        if (pipState.isTransitioningToPip()) {
          // Hide UI elements
        }
    }
override fun onPictureInPictureModeChanged(isInPictureInPictureMode: Boolean) {
        if (isInPictureInPictureMode) {
          // Unhide UI elements
        }
    }

This quick visibility toggle of irrelevant UI elements (for a PiP window) helps ensure a smoother and flicker-free PiP enter animation.

Regole Non disturbare migliorate

AutomaticZenRule consente alle app di personalizzare la funzionalità Attenzione Gestione delle regole (Non disturbare) e decidere quando attivarle o disattivarle che li rappresentano. Android 15 migliora notevolmente queste regole con l'obiettivo di migliorare un'esperienza utente positiva. Sono inclusi i seguenti miglioramenti:

  • Aggiunta di tipi a AutomaticZenRule, in modo che il sistema possa applicare tipi per alcune regole.
  • L'aggiunta di un'icona a AutomaticZenRule, che contribuisce a rendere le modalità più riconoscibili.
  • Aggiunta a AutomaticZenRule di una stringa triggerDescription che descriva le condizioni in cui la regola deve diventare attiva per l'utente.
  • Aggiunta ZenDeviceEffects a AutomaticZenRule, consentendo alle regole di attivare elementi come scala di grigi schermo, modalità notturna o attenuazione dello sfondo.

Impostare VibrationEffect per i canali di notifica

Android 15 supports setting rich vibrations for incoming notifications by channel using NotificationChannel.setVibrationEffect, so your users can distinguish between different types of notifications without having to look at their device.

Etichetta della barra di stato della proiezione di contenuti multimediali e arresto automatico

La proiezione di contenuti multimediali può esporre informazioni private degli utenti. Un nuovo chip della barra di stato in evidenza informa gli utenti di eventuali proiezioni dello schermo in corso. Gli utenti possono toccare il chip per interrompere la trasmissione, la condivisione o la registrazione dello schermo. Inoltre, per un'esperienza utente più intuitiva, qualsiasi proiezione dello schermo in corso ora si interrompe automaticamente quando lo schermo del dispositivo è bloccato.

Chip barra delle app per condivisione schermo, trasmissione e registrazione.

Schermi grandi e fattori di forma

Android 15 offre alle tue app il supporto per sfruttare al meglio i fattori di forma di Android, inclusi schermi di grandi dimensioni, smartphone con apertura a libro e pieghevoli.

Multitasking migliore su schermo grande

Android 15 gives users better ways to multitask on large screen devices. For example, users can save their favorite split-screen app combinations for quick access and pin the taskbar on screen to quickly switch between apps. This means that making sure your app is adaptive is more important than ever.

Google I/O has sessions on Building adaptive Android apps and Building UI with the Material 3 adaptive library that can help, and our documentation has more to help you Design for large screens.

Supporto dello schermo della cover

La tua app può dichiarare una proprietà utilizzata da Android 15 per consentire la visualizzazione di Application o Activity sulle piccole schermate di copertina dei dispositivi pieghevoli supportati. Questi schermi sono troppo piccoli per essere considerati come target compatibili per l'esecuzione delle app per Android, ma la tua app può attivare il loro supporto, rendendola disponibile in più luoghi.

Connettività

Android 15 aggiorna la piattaforma per consentire alla tua app di accedere agli ultimi progressi nelle tecnologie di comunicazione e wireless.

Supporto satellitare

Android 15 continues to extend platform support for satellite connectivity and includes some UI elements to ensure a consistent user experience across the satellite connectivity landscape.

Apps can use ServiceState.isUsingNonTerrestrialNetwork() to detect when a device is connected to a satellite, giving them more awareness of why full network services might be unavailable. Additionally, Android 15 provides support for SMS and MMS apps as well as preloaded RCS apps to use satellite connectivity for sending and receiving messages.

A notification appears when the device connects to a satellite.

Esperienze NFC più fluide

Android 15 is working to make the tap to pay experience more seamless and reliable while continuing to support Android's robust NFC app ecosystem. On supported devices, apps can request the NfcAdapter to enter observe mode, where the device listens but doesn't respond to NFC readers, sending the app's NFC service PollingFrame objects to process. The PollingFrame objects can be used to auth ahead of the first communication to the NFC reader, allowing for a one tap transaction in many cases.

In addition, apps can register a filter on supported devices so they can be notified of polling loop activity, which allows for smooth operation with multiple NFC-aware applications.

Ruolo del wallet

Android 15 introduces a Wallet role that allows tighter integration with the user's preferred wallet app. This role replaces the NFC default contactless payment setting. Users can manage the Wallet role holder by navigating to Settings > Apps > Default Apps.

The Wallet role is used when routing NFC taps for AIDs registered in the payment category. Taps always go to the Wallet role holder unless another app that is registered for the same AID is running in the foreground.

This role is also used to determine where the Wallet Quick Access tile should go when activated. When the role is set to "None", the Quick Access tile isn't available and payment category NFC taps are only delivered to the foreground app.

Sicurezza

Android 15 ti aiuta a migliorare la sicurezza della tua app, proteggere i dati dell'app e offre agli utenti maggiore trasparenza e controllo sui propri dati. Guarda il talk Safeguarding user security on Android di Google I/O per scoprire di più su cosa stiamo facendo per migliorare le misure di salvaguardia degli utenti e proteggere la tua app da nuove minacce.

Integrare Gestore delle credenziali con la compilazione automatica

Starting with Android 15, developers can link specific views like username or password fields with Credential Manager requests, making it easier to provide a tailored user experience during the sign-in process. When the user focuses on one of these views, a corresponding request is sent to Credential Manager. The resulting credentials are aggregated across providers and displayed in autofill fallback UIs, such as inline suggestions or drop-down suggestions. The Jetpack androidx.credentials library is the preferred endpoint for developers to use and will soon be available to further enhance this feature in Android 15 and higher.

Integrare la registrazione e l'accesso con un solo tocco con le richieste biometriche

Credential Manager integrates biometric prompts into the credential creation and sign-in processes, eliminating the need for providers to manage biometric prompts. As a result, credential providers only need to focus on the results of the create and get flows, augmented with the biometric flow result. This simplified process creates a more efficient and streamlined credential creation and retrieval process.

Gestione delle chiavi per la crittografia end-to-end

We are introducing the E2eeContactKeysManager in Android 15, which facilitates end-to-end encryption (E2EE) in your Android apps by providing an OS-level API for the storage of cryptographic public keys.

The E2eeContactKeysManager is designed to integrate with the platform contacts app to give users a centralized way to manage and verify their contacts' public keys.

Controlli delle autorizzazioni sugli URI dei contenuti

Android 15 introduce un insieme di API che eseguono controlli delle autorizzazioni sugli URI dei contenuti:

Accessibilità

Android 15 aggiunge funzionalità che migliorano l'accessibilità per gli utenti.

Braille migliorato

In Android 15, we've made it possible for TalkBack to support Braille displays that are using the HID standard over both USB and secure Bluetooth.

This standard, much like the one used by mice and keyboards, will help Android support a wider range of Braille displays over time.

Internazionalizzazione

Android 15 aggiunge funzionalità e capacità che completano l'esperienza utente quando un dispositivo viene utilizzato in lingue diverse.

Carattere variabile CJK

A partire da Android 15, il file del carattere per le lingue cinese, giapponese e coreano (CJK), NotoSansCJK, è ora un carattere variabile. I caratteri variabili aprono nuove possibilità per la tipografia creativa nelle lingue CJK. I designer possono esplorare una gamma più ampia di stili e creare layout visivamente accattivanti che in precedenza erano difficili o impossibili da realizzare.

Come viene visualizzato il carattere variabile per le lingue cinese, giapponese e coreano (CJK) con larghezze diverse.

Giustificazione tra caratteri

A partire da Android 15, il testo può essere giustificato utilizzando la spaziatura tra le lettere utilizzando JUSTIFICATION_MODE_INTER_CHARACTER. La giustificazione tra parole era introdotto per la prima volta in Android 8.0 (livello API 26) e giustificazione offre funzionalità simili per i linguaggi che utilizzano spazio vuoto per la segmentazione, ad esempio cinese, giapponese e altri.

Layout del testo in giapponese con JUSTIFICATION_MODE_NONE.
Layout per il testo in inglese utilizzando JUSTIFICATION_MODE_NONE.


Layout per il testo giapponese che utilizza JUSTIFICATION_MODE_INTER_WORD.
Layout per il testo in inglese utilizzando JUSTIFICATION_MODE_INTER_WORD.


Layout del testo in giapponese che utilizza JUSTIFICATION_MODE_INTER_CHARACTER.
Layout per il testo in inglese che utilizza JUSTIFICATION_MODE_INTER_CHARACTER.

Configurazione dell'interruzione di riga automatica

Android started supporting phrase-based line breaks for Japanese and Korean in Android 13 (API level 33). However, while phrase-based line breaks improve the readability of short lines of text, they don't work well for long lines of text. In Android 15, apps can apply phrase-based line breaks only for short lines of text, using the LINE_BREAK_WORD_STYLE_AUTO option. This option selects the best word style option for the text.

For short lines of text, phrase-based line breaks are used, functioning the same as LINE_BREAK_WORD_STYLE_PHRASE, as shown in the following image:

For short lines of text, LINE_BREAK_WORD_STYLE_AUTO applies phrase-based line breaks to improve the readability of the text. This is the same as applying LINE_BREAK_WORD_STYLE_PHRASE.

For longer lines of text, LINE_BREAK_WORD_STYLE_AUTO uses a no line-break word style, functioning the same as LINE_BREAK_WORD_STYLE_NONE, as shown in the following image:

For long lines of text, LINE_BREAK_WORD_STYLE_AUTO applies no line-break word style to improve the readability of the text. This is the same as applying LINE_BREAK_WORD_STYLE_NONE.

Carattere Hentaigana giapponese aggiuntivo

In Android 15, a font file for old Japanese Hiragana (known as Hentaigana) is bundled by default. The unique shapes of Hentaigana characters can add a distinctive flair to artwork or design while also helping to preserve accurate transmission and understanding of ancient Japanese documents.

Character and text style for the Japanese Hentaigana font.

VideoLAN cone Copyright (c) 1996-2010 VideoLAN. This logo or a modified version may be used or modified by anyone to refer to the VideoLAN project or any product developed by the VideoLAN team, but does not indicate endorsement by the project.

Vulkan and the Vulkan logo are registered trademarks of the Khronos Group Inc.

OpenGL is a registered trademark and the OpenGL ES logo is a trademark of Hewlett Packard Enterprise used by permission by Khronos.