WifiAwareManager


public class WifiAwareManager
extends Object

java.lang.Object
   ↳ android.net.wifi.aware.WifiAwareManager


This class provides the primary API for managing Wi-Fi Aware operations: discovery and peer-to-peer data connections.

The class provides access to:

Aware may not be usable when Wi-Fi is disabled (and other conditions). To validate that the functionality is available use the isAvailable() function. To track changes in Aware usability register for the ACTION_WIFI_AWARE_STATE_CHANGED broadcast. Note that this broadcast is not sticky - you should register for it and then check the above API to avoid a race condition.

An application must use attach(android.net.wifi.aware.AttachCallback, android.os.Handler) to initialize a Aware cluster - before making any other Aware operation. Aware cluster membership is a device-wide operation - the API guarantees that the device is in a cluster or joins a Aware cluster (or starts one if none can be found). Information about attach success (or failure) are returned in callbacks of AttachCallback. Proceed with Aware discovery or connection setup only after receiving confirmation that Aware attach succeeded - AttachCallback#onAttached(WifiAwareSession). When an application is finished using Aware it must use the WifiAwareSession#close() API to indicate to the Aware service that the device may detach from the Aware cluster. The device will actually disable Aware once the last application detaches.

Once a Aware attach is confirmed use the WifiAwareSession#publish(PublishConfig, DiscoverySessionCallback, Handler) or WifiAwareSession#subscribe(SubscribeConfig, DiscoverySessionCallback, Handler) to create publish or subscribe Aware discovery sessions. Events are called on the provided callback object DiscoverySessionCallback. Specifically, the DiscoverySessionCallback#onPublishStarted(PublishDiscoverySession) and DiscoverySessionCallback#onSubscribeStarted( SubscribeDiscoverySession) return PublishDiscoverySession and SubscribeDiscoverySession objects respectively on which additional session operations can be performed, e.g. updating the session PublishDiscoverySession#updatePublish(PublishConfig) and SubscribeDiscoverySession#updateSubscribe(SubscribeConfig). Sessions can also be used to send messages using the DiscoverySession#sendMessage(PeerHandle, int, byte[]) APIs. When an application is finished with a discovery session it must terminate it using the DiscoverySession#close() API.

Creating connections between Aware devices is managed by the standard ConnectivityManager#requestNetwork(NetworkRequest, ConnectivityManager.NetworkCallback). The NetworkRequest object should be constructed with:

Summary

Constants

String ACTION_WIFI_AWARE_RESOURCE_CHANGED

Intent broadcast sent whenever Wi-Fi Aware resource availability has changed.

String ACTION_WIFI_AWARE_STATE_CHANGED

Broadcast intent action to indicate that the state of Wi-Fi Aware availability has changed and all active Aware sessions are no longer usable.

String EXTRA_AWARE_RESOURCES

Sent as a part of ACTION_WIFI_AWARE_RESOURCE_CHANGED that contains an instance of AwareResources representing the current Wi-Fi Aware resources.

int WIFI_AWARE_DATA_PATH_ROLE_INITIATOR

Connection creation role is that of INITIATOR.

int WIFI_AWARE_DATA_PATH_ROLE_RESPONDER

Connection creation role is that of RESPONDER.

int WIFI_AWARE_DISCOVERY_LOST_REASON_PEER_NOT_VISIBLE

Reason code provided in DiscoverySessionCallback#onServiceLost(PeerHandle, int) indicating that the service advertised by the peer is no longer visible.

int WIFI_AWARE_DISCOVERY_LOST_REASON_UNKNOWN

Reason code provided in DiscoverySessionCallback#onServiceLost(PeerHandle, int) indicating that the service was lost for unknown reason.

Public methods

void attach(AttachCallback attachCallback, Handler handler)

Attach to the Wi-Fi Aware service - enabling the application to create discovery sessions or create connections to peers.

void attach(AttachCallback attachCallback, IdentityChangedListener identityChangedListener, Handler handler)

Attach to the Wi-Fi Aware service - enabling the application to create discovery sessions or create connections to peers.

AwareResources getAvailableAwareResources()

Return the available resources of the Wi-Fi aware service: a set of parameters which specify limitations on service usage, e.g the number of data-paths which could be created.

Characteristics getCharacteristics()

Returns the characteristics of the Wi-Fi Aware interface: a set of parameters which specify limitations on configurations, e.g. the maximum service name length.

void getPairedDevices(Executor executor, Consumer<List<String>> resultsCallback)

Get all the paired devices configured by the calling app.

boolean isAvailable()

Returns the current status of Aware API: whether or not Aware is available.

boolean isDeviceAttached()

Return the current status of the Aware service: whether or not the device is already attached to an Aware cluster.

boolean isInstantCommunicationModeEnabled()

Return the current status of the Wifi Aware instant communication mode.

void isOpportunisticModeEnabled(Executor executor, Consumer<Boolean> resultsCallback)

Indicate whether all Wi-Fi Aware sessions created by the calling app are opportunistic as defined and configured by setOpportunisticModeEnabled(boolean)
Requires Manifest.permission.ACCESS_WIFI_STATE

boolean isSetChannelOnDataPathSupported()

Return the device support for setting a channel requirement in a data-path request.

void removePairedDevice(String alias)

Remove the target paired device setup by the caller by DiscoverySession#initiatePairingRequest(PeerHandle, String, int, String) and DiscoverySession#acceptPairingRequest(int, PeerHandle, String, int, String)
Requires Manifest.permission.CHANGE_WIFI_STATE

void resetPairedDevices()

Reset all paired devices setup by the caller by DiscoverySession#initiatePairingRequest(PeerHandle, String, int, String) and DiscoverySession#acceptPairingRequest(int, PeerHandle, String, int, String)
Requires Manifest.permission.CHANGE_WIFI_STATE

void setOpportunisticModeEnabled(boolean enabled)

Set all Wi-Fi Aware sessions created by the calling app to be opportunistic.

Inherited methods

Constants

ACTION_WIFI_AWARE_RESOURCE_CHANGED

Added in API level 33
public static final String ACTION_WIFI_AWARE_RESOURCE_CHANGED

Intent broadcast sent whenever Wi-Fi Aware resource availability has changed. The resources are attached with the EXTRA_AWARE_RESOURCES extra. The resources can also be obtained using the getAvailableAwareResources() method. To receive this broadcast, apps must hold Manifest.permission.ACCESS_WIFI_STATE.

Note: The broadcast is only delivered to registered receivers - no manifest registered components will be launched.
Requires Manifest.permission.ACCESS_WIFI_STATE

Constant Value: "android.net.wifi.aware.action.WIFI_AWARE_RESOURCE_CHANGED"

ACTION_WIFI_AWARE_STATE_CHANGED

Added in API level 26
public static final String ACTION_WIFI_AWARE_STATE_CHANGED

Broadcast intent action to indicate that the state of Wi-Fi Aware availability has changed and all active Aware sessions are no longer usable. Use the isAvailable() to query the current status. This broadcast is not sticky, use the isAvailable() API after registering the broadcast to check the current state of Wi-Fi Aware.

Note: The broadcast is only delivered to registered receivers - no manifest registered components will be launched.

Constant Value: "android.net.wifi.aware.action.WIFI_AWARE_STATE_CHANGED"

EXTRA_AWARE_RESOURCES

Added in API level 33
public static final String EXTRA_AWARE_RESOURCES

Sent as a part of ACTION_WIFI_AWARE_RESOURCE_CHANGED that contains an instance of AwareResources representing the current Wi-Fi Aware resources.

Constant Value: "android.net.wifi.aware.extra.AWARE_RESOURCES"

WIFI_AWARE_DATA_PATH_ROLE_INITIATOR

Added in API level 26
public static final int WIFI_AWARE_DATA_PATH_ROLE_INITIATOR

Connection creation role is that of INITIATOR. Used to create a network specifier string when requesting a Aware network.

Constant Value: 0 (0x00000000)

WIFI_AWARE_DATA_PATH_ROLE_RESPONDER

Added in API level 26
public static final int WIFI_AWARE_DATA_PATH_ROLE_RESPONDER

Connection creation role is that of RESPONDER. Used to create a network specifier string when requesting a Aware network.

Constant Value: 1 (0x00000001)

WIFI_AWARE_DISCOVERY_LOST_REASON_PEER_NOT_VISIBLE

Added in API level 31
public static final int WIFI_AWARE_DISCOVERY_LOST_REASON_PEER_NOT_VISIBLE

Reason code provided in DiscoverySessionCallback#onServiceLost(PeerHandle, int) indicating that the service advertised by the peer is no longer visible. This may be because the peer is out of range or because the peer stopped advertising this service.

Constant Value: 1 (0x00000001)

WIFI_AWARE_DISCOVERY_LOST_REASON_UNKNOWN

Added in API level 31
public static final int WIFI_AWARE_DISCOVERY_LOST_REASON_UNKNOWN

Reason code provided in DiscoverySessionCallback#onServiceLost(PeerHandle, int) indicating that the service was lost for unknown reason.

Constant Value: 0 (0x00000000)

Public methods

attach

Added in API level 26
public void attach (AttachCallback attachCallback, 
                Handler handler)

Attach to the Wi-Fi Aware service - enabling the application to create discovery sessions or create connections to peers. The device will attach to an existing cluster if it can find one or create a new cluster (if it is the first to enable Aware in its vicinity). Results (e.g. successful attach to a cluster) are provided to the attachCallback object. An application must call WifiAwareSession#close() when done with the Wi-Fi Aware object.

Note: a Aware cluster is a shared resource - if the device is already attached to a cluster then this function will simply indicate success immediately using the same attachCallback.
Requires Manifest.permission.ACCESS_WIFI_STATE and Manifest.permission.CHANGE_WIFI_STATE

Parameters
attachCallback AttachCallback: A callback for attach events, extended from AttachCallback. This value cannot be null.

handler Handler: The Handler on whose thread to execute the callbacks of the attachCallback object. If a null is provided then the application's main thread will be used.

attach

Added in API level 26
public void attach (AttachCallback attachCallback, 
                IdentityChangedListener identityChangedListener, 
                Handler handler)

Attach to the Wi-Fi Aware service - enabling the application to create discovery sessions or create connections to peers. The device will attach to an existing cluster if it can find one or create a new cluster (if it is the first to enable Aware in its vicinity). Results (e.g. successful attach to a cluster) are provided to the attachCallback object. An application must call WifiAwareSession#close() when done with the Wi-Fi Aware object.

Note: a Aware cluster is a shared resource - if the device is already attached to a cluster then this function will simply indicate success immediately using the same attachCallback.

This version of the API attaches a listener to receive the MAC address of the Aware interface on startup and whenever it is updated (it is randomized at regular intervals for privacy). If targeting Build.VERSION_CODES.TIRAMISU or later, the application must have Manifest.permission.NEARBY_WIFI_DEVICES with android:usesPermissionFlags="neverForLocation". If the application does not declare android:usesPermissionFlags="neverForLocation", then it must also have Manifest.permission.ACCESS_FINE_LOCATION. If targeting an earlier release than Build.VERSION_CODES.TIRAMISU, the application must have Manifest.permission.ACCESS_FINE_LOCATION. Apps without Manifest.permission.NEARBY_WIFI_DEVICES or Manifest.permission.ACCESS_FINE_LOCATION can use the attach(android.net.wifi.aware.AttachCallback, android.os.Handler) version. Note that aside from permission requirements the IdentityChangedListener will wake up the host at regular intervals causing higher power consumption, do not use it unless the information is necessary (e.g. for out-of-band discovery).

Parameters
attachCallback AttachCallback: A callback for attach events, extended from AttachCallback. This value cannot be null.

identityChangedListener IdentityChangedListener: A callback for changed identity or cluster ID, extended from IdentityChangedListener. This value cannot be null.

handler Handler: The Handler on whose thread to execute the callbacks of the attachCallback and identityChangedListener objects. If a null is provided then the application's main thread will be used.

getAvailableAwareResources

Added in API level 31
public AwareResources getAvailableAwareResources ()

Return the available resources of the Wi-Fi aware service: a set of parameters which specify limitations on service usage, e.g the number of data-paths which could be created.

May return null if the Wi-Fi Aware service is not initialized. Use attach(android.net.wifi.aware.AttachCallback, android.os.Handler) or attach(android.net.wifi.aware.AttachCallback, android.net.wifi.aware.IdentityChangedListener, android.os.Handler) to initialize the Wi-Fi Aware service.
Requires Manifest.permission.ACCESS_WIFI_STATE

Returns
AwareResources An object specifying the currently available resource of the Wi-Fi Aware service.

getCharacteristics

Added in API level 26
public Characteristics getCharacteristics ()

Returns the characteristics of the Wi-Fi Aware interface: a set of parameters which specify limitations on configurations, e.g. the maximum service name length.

May return null if the Wi-Fi Aware service is not initialized. Use attach(android.net.wifi.aware.AttachCallback, android.os.Handler) or attach(android.net.wifi.aware.AttachCallback, android.net.wifi.aware.IdentityChangedListener, android.os.Handler) to initialize the Wi-Fi Aware service.
Requires Manifest.permission.ACCESS_WIFI_STATE

Returns
Characteristics An object specifying configuration limitations of Aware.

getPairedDevices

Added in API level 34
public void getPairedDevices (Executor executor, 
                Consumer<List<String>> resultsCallback)

Get all the paired devices configured by the calling app.
Requires Manifest.permission.ACCESS_WIFI_STATE

Parameters
executor Executor: The executor on which callback will be invoked. This value cannot be null.

resultsCallback Consumer: An asynchronous callback that will return a list of paired devices' alias This value cannot be null.

isAvailable

Added in API level 26
public boolean isAvailable ()

Returns the current status of Aware API: whether or not Aware is available. To track changes in the state of Aware API register for the ACTION_WIFI_AWARE_STATE_CHANGED broadcast.
Requires Manifest.permission.ACCESS_WIFI_STATE

Returns
boolean A boolean indicating whether the app can use the Aware API at this time (true) or not (false).

isDeviceAttached

Added in API level 31
public boolean isDeviceAttached ()

Return the current status of the Aware service: whether or not the device is already attached to an Aware cluster. To attach to an Aware cluster, please use attach(android.net.wifi.aware.AttachCallback, android.os.Handler) or attach(android.net.wifi.aware.AttachCallback, android.net.wifi.aware.IdentityChangedListener, android.os.Handler).
Requires Manifest.permission.ACCESS_WIFI_STATE

Returns
boolean A boolean indicating whether the device is attached to a cluster at this time (true) or not (false).

isInstantCommunicationModeEnabled

Added in API level 31
public boolean isInstantCommunicationModeEnabled ()

Return the current status of the Wifi Aware instant communication mode. If the device doesn't support this feature, return will always be false.
Requires Manifest.permission.ACCESS_WIFI_STATE

Returns
boolean true if it is enabled, false otherwise.

isOpportunisticModeEnabled

Added in API level 34
public void isOpportunisticModeEnabled (Executor executor, 
                Consumer<Boolean> resultsCallback)

Indicate whether all Wi-Fi Aware sessions created by the calling app are opportunistic as defined and configured by setOpportunisticModeEnabled(boolean)
Requires Manifest.permission.ACCESS_WIFI_STATE

Parameters
executor Executor: The executor on which callback will be invoked. This value cannot be null. Callback and listener events are dispatched through this Executor, providing an easy way to control which thread is used. To dispatch events through the main thread of your application, you can use Context.getMainExecutor(). Otherwise, provide an Executor that dispatches to an appropriate thread.

resultsCallback Consumer: An asynchronous callback that will return boolean This value cannot be null.

isSetChannelOnDataPathSupported

Added in API level 33
public boolean isSetChannelOnDataPathSupported ()

Return the device support for setting a channel requirement in a data-path request. If true the channel set by WifiAwareNetworkSpecifier.Builder#setChannelFrequencyMhz(int, boolean) will be honored, otherwise it will be ignored.
Requires Manifest.permission.ACCESS_WIFI_STATE

Returns
boolean True is the device support set channel on data-path request, false otherwise.

removePairedDevice

Added in API level 34
public void removePairedDevice (String alias)

Remove the target paired device setup by the caller by DiscoverySession#initiatePairingRequest(PeerHandle, String, int, String) and DiscoverySession#acceptPairingRequest(int, PeerHandle, String, int, String)
Requires Manifest.permission.CHANGE_WIFI_STATE

Parameters
alias String: The alias set by the caller This value cannot be null.

setOpportunisticModeEnabled

Added in API level 34
public void setOpportunisticModeEnabled (boolean enabled)

Set all Wi-Fi Aware sessions created by the calling app to be opportunistic. Opportunistic Wi-Fi Aware sessions are considered low priority and may be torn down (the sessions or the Aware interface) if there are resource conflicts.
Requires Manifest.permission.CHANGE_WIFI_STATE

Parameters
enabled boolean: True to configure all Wi-Fi Aware sessions by the calling app as Opportunistic. False by default.