LayoutElementBuilders.Arc.Builder

public Builder()

Creates an instance of Builder.

@RequiresSchemaVersion(major = 1, minor = 0)
public @NonNull LayoutElementBuilders.Arc.Builder addContent(@NonNull LayoutElementBuilders.ArcLayoutElement content)

Adds one item to contents of this container.

public @NonNull LayoutElementBuilders.Arc build()

Builds an instance from accumulated values.

@RequiresSchemaVersion(major = 1, minor = 0)
public @NonNull LayoutElementBuilders.Arc.Builder setAnchorAngle(@NonNull DimensionBuilders.DegreesProp anchorAngle)

Sets the angle for the anchor, used with anchor_type to determine where to draw children. Note that 0 degrees is the 12 o clock position on a device, and the angle sweeps clockwise. If not defined, defaults to 0 degrees.

Values do not have to be clamped to the range 0-360; values less than 0 degrees will sweep anti-clockwise (i.e. -90 degrees is equivalent to 270 degrees), and values >360 will be be placed at X mod 360 degrees.

While this field is statically accessible from 1.0, it's only bindable since version 1.2 and renderers supporting version 1.2 will use the dynamic value (if set).

@RequiresSchemaVersion(major = 1, minor = 0)
public @NonNull LayoutElementBuilders.Arc.Builder setAnchorType(int anchorType)

Sets how to align the contents of this container relative to anchor_angle. If not defined, defaults to ARC_ANCHOR_CENTER.

@RequiresSchemaVersion(major = 1, minor = 0)
public @NonNull LayoutElementBuilders.Arc.Builder setAnchorType(
    @NonNull LayoutElementBuilders.ArcAnchorTypeProp anchorType
)

Sets how to align the contents of this container relative to anchor_angle. If not defined, defaults to ARC_ANCHOR_CENTER.

@RequiresSchemaVersion(major = 1, minor = 300)
public @NonNull LayoutElementBuilders.Arc.Builder setArcDirection(int arcDirection)

Sets the direction in which child elements are laid out. If not set, defaults to ARC_DIRECTION_NORMAL.

@RequiresSchemaVersion(major = 1, minor = 300)
public @NonNull LayoutElementBuilders.Arc.Builder setArcDirection(
    @NonNull LayoutElementBuilders.ArcDirectionProp arcDirection
)

Sets the direction in which child elements are laid out. If not set, defaults to ARC_DIRECTION_NORMAL.

@RequiresSchemaVersion(major = 1, minor = 0)
public @NonNull LayoutElementBuilders.Arc.Builder setModifiers(@NonNull ModifiersBuilders.Modifiers modifiers)

Sets androidx.wear.protolayout.ModifiersBuilders.Modifiers for this element.

@RequiresSchemaVersion(major = 1, minor = 0)
public @NonNull LayoutElementBuilders.Arc.Builder setVerticalAlign(int verticalAlign)

Sets vertical alignment of elements within the arc. If the Arc's thickness is larger than the thickness of the element being drawn, this controls whether the element should be drawn towards the inner or outer edge of the arc, or drawn in the center. If not defined, defaults to VERTICAL_ALIGN_CENTER.

@RequiresSchemaVersion(major = 1, minor = 0)
public @NonNull LayoutElementBuilders.Arc.Builder setVerticalAlign(
    @NonNull LayoutElementBuilders.VerticalAlignmentProp verticalAlign
)

Sets vertical alignment of elements within the arc. If the Arc's thickness is larger than the thickness of the element being drawn, this controls whether the element should be drawn towards the inner or outer edge of the arc, or drawn in the center. If not defined, defaults to VERTICAL_ALIGN_CENTER.